Omniphobic liquid-like surfaces

Liquid-repellent surfaces, especially smooth solid surfaces with covalently grafted flexible polymer brushes or alkyl monolayers, are the focus of an expanding research area. Surface-tethered flexible species are highly mobile at room temperature, giving solid surfaces a unique liquid-like quality and unprecedented dynamical repellency towards various liquids regardless of their surface tension. Omniphobic liquid-like surfaces (LLSs) are a promising alternative to air-mediated superhydrophobic or superoleophobic surfaces and lubricant-mediated slippery surfaces, avoiding fabrication complexity and air/lubricant loss issues. More importantly, the liquid-like molecular layer controls many important interface properties, such as slip, friction and adhesion, which may enable novel functions and applications that are inaccessible with conventional solid coatings. In this Review, we introduce LLSs and their inherent dynamic omniphobic mechanisms. Particular emphasis is given to the fundamental principles of surface design and the consequences of the liquid-like nature for task-specific applications. We also provide an overview of the key challenges and opportunities for omniphobic LLSs.

Super-Slippery Poly(Dimethylsiloxane) Brush Surfaces: From Fabrication to Practical Application

Superwetting surfaces with special slippery performances have been the focus of practical applications and basic research for decades. Compared to superhydrophobic/superoleophobic and slippery liquid-infused porous surfaces (SLIPS), liquid-like covalently attached poly(dimethylsiloxane) (PDMS) brush surfaces have no trouble in constructing the micro/nanostructure and the loss of infused lubricant, meanwhile, it can also provide lots of new advantages, such as smooth, transparent, pressure- and temperature-resistant, and low contact angle hysteresis (CAH) to diverse liquids. This paper focuses on the relationship between the wetting performance and practical functional application of PDMS brush surfaces. Recent progress of the preparation of PDMS brush surfaces and their super-slippery performances, with a special focus on diverse functional applications were summarized. Finally, perspectives on future research directions are also discussed.

The Oleofobization of Paper via Plasma Treatment

Cellulose is a promising biomass material suitable for high volume applications. Its potential lies in sustainability, which is becoming one of the leading trends in industry. However, there are certain drawbacks of cellulose materials which limit their use, especially their high wettability and low barrier properties, which can be overcome by applying thin coatings. Plasma technologies present a high potential for deposition of thin environmentally friendly and recyclable coatings. In this paper, two different plasma reactors were used for coating two types of cellulose-based substrates with hexamethyldisiloxane (HMDSO). The changes in surface characteristics were measured by atomic force microscopy (AFM), scanning electron microscopy (SEM), surface free energy and contact angles measurements, X-ray photoelectron spectroscopy (XPS), and secondary ion mass spectrometry (SIMS). Successful oleofobization was observed for an industrial scale reactor where pure HMDSO was used in the absence of oxygen.

Robust Hyperbranched Polyester-Based Anti-Smudge Coatings for Self-Cleaning, Anti-Graffiti, and Chemical Shielding

In this work, a novel anti-smudge coating system was developed by using hydroxyl-terminated hyperbranched polyester as a coating precursor, mono-hydroxyl-terminated poly(dimethylsiloxane) (PDMS) as an anti-smudge agent, and hexamethylene diisocyanate trimer as a curing agent. The resultant coatings with 0.5 wt % PDMS content incorporated are highly transparent and liquid repellent. They exhibit striking repellency against various liquids and display remarkable self-cleaning performance. Water, hexadecane, salt solution, strong alkali solution, strong acid solution, pump oil, and crude oil could slide off the coated surface without leaving any traces, and the dirt on the coated surface could be readily removed by water or oil. Besides, these coatings show potential application for anti-fingerprint and anti-graffiti due to the exceptional repellency of coated surface against artificial fingerprint liquid, oil-based ink, paint, and water-based smudge. Furthermore, they also possess superb chemical shielding ability and thus endow substrates with remarkable protection against exposure to harsh chemical conditions. Moreover, these coatings are mechanically robust against extensive abrasion, impact, and bending without compromising anti-smudge properties, and they also exhibit excellent adhesion to various substrates. Therefore, these newly developed coatings have tremendous potential for widespread applications.

Fabrication of Food-Safe Water-Resistant Paper Coatings Using a Melamine Primer and Polysiloxane Outer Layer

Paper-based materials are highly desirable as packaging materials due to their numerous advantages that include low cost, renewability, and biodegradability. However, their hydrophilicity has limited their range of applications. Reported herein is a facile and economical approach for the preparation of biodegradable water-resistant paper for food-contact applications. Commercial printing paper and cup papers are coated with melamine, which is FDA approved for food-contact applications. Subsequently, a water-repellent outer layer is applied using poly(dimethylsiloxane) (PDMS)-isocyanate. A relationship between the PDMS concentration and water contact angles (WCAs) of the obtained coating was studied. Typically, the coated cup paper and printing paper had coating loadings of 1.61 ± 1.10 and 0.93 ± 0.74 wt %, respectively. After the coatings had been applied, the WCAs were very high (>125°), and water absorption had decreased by 70% for printing paper and by 35% for cup paper. Considering the facile fabrication method and the low-cost food-safe raw materials, herein, this approach will have great potential for the large-scale production of materials for use in food- and nonfood contact applications.

An insight into the amphiphobicity and thermal degradation behavior of PDMS-based block copolymers bearing POSS and fluorinated units

Methacryloxypropyl-polyhedral oligomeric silsesquioxane (MAPOSS) and dodecafluoroheptyl methacrylate (DFHM) are proposed to separately block-copolymerize with polydimethylsiloxane (PDMS)-based acrylate block copolymer (PDMS-b-PMMA). The syntheses of PDMS-b-PMMA-b-PMAPOSS and PDMS-b-PMMA-b-PDFHM were executed in this manner to examine the effect of PMAPOSS and PDFHM on surface amphiphobic behavior and thermal degradation behavior. PMAPOSS and PDFHM were found to both contribute towards the improvement of static hydrophobicity. However, the PMAPOSS was found to disable the dynamic hexadecane-dewetting properties because of its restriction on molecular wriggling motion and its induced high roughness. In contrast, PDFHM was found to improve the dynamic dewetting properties for oil-based ink. With regard to the thermal stability, the incorporation of either PMAPOSS or PDFHM into PDMS-b-PMMA with PDMS (Mn ∼1000 or 5000 Da) favors the increase in the original thermal-decomposition temperature. However, the presence of PMAPOSS initiates a higher degradation rate and fails to improve the thermal stability in the case of long PDMS (Mn ∼10 000 Da) due to the heterogeneous dispersion of POSS in the matrix.

Sustainable coatings from bio-based, enzymatically synthesized polyesters with enhanced functionalities

Renewable coatings have been prepared from sorbitol-derived aliphatic polyesters with enhanced functionalities, i.e. pendant and terminal hydroxyl groups, synthesized via enzymatic catalysis.