A Rotational BODIPY Nucleotide: An Environment-Sensitive Fluorescence-Lifetime Probe for DNA Interactions and Applications in Live-Cell Microscopy

Molecular Rotors: Fluorescent Sensors for Microviscosity and Conformation of Biomolecules

The viscosity and crowding of biological environment are considered vital for the correct cellular function, and alterations in these parameters are known to underly a number of pathologies including diabetes, malaria, cancer and neurodegenerative diseases, to name a few. Over the last decades, fluorescent molecular probes termed molecular rotors proved extremely useful for exploring viscosity, crowding, and underlying molecular interactions in biologically relevant settings. In this review, we will discuss the basic principles underpinning the functionality of these probes and will review advances in their use as sensors for lipid order, protein crowding and conformation, temperature and non-canonical nucleic acid structures in live cells and other relevant biological settings.

Chimeric GFP-uracil based molecular rotor fluorophores

Uracil has been modified at the 5-position to derive a small library of nucleobase-chromophores which were inspired by green fluorescent protein (GFP). The key steps in the syntheses were Erlenmeyer azlactone synthesis followed by amination by use of hexamethyl disilazane (HMDS) to produce the imidazolinone derivatives. The uracil analogues displayed emission in the green region of visible spectrum and exhibited microenvironmental sensitivity exemplified by polarity-based solvatochromism and viscosity-dependent emission enhancement. Solid-state quantum yields of approximately 0.2 and solvent dependent emission wavelengths beyond 500 nm were observed. Select analogues were incorporated into peptide nucleic acid (PNA) strands which upon duplex formation with DNA showed good response ranging from a turn-off of fluorescence in presence of an opposing mismatched residue to a greater than 3-fold turn-on of fluorescence upon binding to fully complementary DNA strand.

Thiophene-Extended Fluorescent Nucleosides as Molecular Rotor-Type Fluorogenic Sensors for Biomolecular Interactions

Fluorescent molecular rotors are versatile tools for the investigation of biomolecular interactions and the monitoring of microenvironmental changes in biological systems. They can transform invisible information into a fluorescence signal as a straightforward response. Their utility is synergistically amplified when they are merged with biomolecules. Despite the tremendous significance and superior programmability of nucleic acids, there are very few reports on the development of molecular rotor-type isomorphic nucleosides. Here, we report the synthesis and characterization of a highly emissive molecular rotor-containing thymine nucleoside (^ThexT) and its 2'-O-methyluridine analogue (2'-OMe-^ThexU) as fluorogenic microenvironment-sensitive sensors that emit vivid fluorescence via an interaction with the target proteins. ^ThexT and 2'-OMe-^ThexU may potentially serve as robust probes for a broad range of applications, such as fluorescence mapping, to monitor viscosity changes and specific protein-binding interactions in biological systems.

BODIPY-Ethynylestradiol molecular rotors as fluorescent viscosity probes in endoplasmic reticulum

Due to their capability for sensing changes in viscosity, fluorescent molecular rotors (FMRs) have emerged as potential tools to develop several promising viscosity probes; most of them, however, localize non-selectively within cells, precluding changes in the viscosity of specific cellular microdomains to be studied by these means. Following previous reports on enhanced fluorophore uptake efficiency and selectivity by incorporation of biological submolecular fragments, here we report two potential BODIPY FMRs based on an ethynylestradiol spindle, a non-cytotoxic semisynthetic estrogen well recognized by human cells. A critical evaluation of the potential of these fluorophores for being employed as FMRs is presented, including the photophysical characterization of the probes, SXRD studies and TD-DFT computations, as well as confocal microscopy imaging in MCF-7 (breast cancer) cells.

Lifetime-Based Responsive Probes: Design and Applications in Biological Analysis

With the development of modern biomedicine, biological analysis and detection are very important in disease diagnosis, detection of curative effect, prognosis and prediction of tumor recurrence. Compared with the currently widely used optical probes based on intensity signals, the lifetime signal does not depend on the influence of conditions such as the concentration of luminophore, tissue penetration depth and measurement method. Therefore, biological detection methods based on lifetime-based responsive probes have attracted great attention from the scientific community. Here, we briefly review the key advances in lifetime-based responsive probes in recent years (2017-2022). The review focuses on the design strategies of lifetime-based responsive probes and the research progress of their applications in the field of bioanalysis, and discusses the challenges they face. We hope it will further promote the development of lifetime-based responsive probes in the field of bioanalysis. With the development of modern biomedicine, biological analysis and detection are very important in disease diagnosis, detection of curative effect, prognosis and prediction of tumor recurrence. Compared with the currently widely used optical probes based on intensity signals, the lifetime signal does not depend on the influence of conditions such as the concentration of luminophore, tissue penetration depth and measurement method. Therefore, biological detection methods based on lifetime-based responsive probes have attracted great attention from the scientific community. Here, we briefly review the key advances in lifetime-based responsive probes in recent years (2017-2022). The review focuses on the design strategies of lifetime-based responsive probes and the research progress of their applications in the field of bioanalysis, and discusses the challenges they face. We hope it will further promote the development of lifetime-based responsive probes in the field of bioanalysis.

Acetophenyl-thienyl-aniline-Linked Nucleotide for Construction of Solvatochromic Fluorescence Light-Up DNA Probes Sensing Protein-DNA Interactions

The synthesis of 2'-deoxycytidine and its 5'-O-triphosphate bearing solvatochromic acetophenyl-thienyl-aniline fluorophore was developed using the Sonogashira cross-coupling reaction as the key step. The triphosphate was used for polymerase synthesis of labelled DNA. The labelled nucleotide or DNA exerted weak red fluorescence when excited at 405 nm, but a significant colour change (to yellow or green) and light-up (up to 20 times) was observed when the DNA probes interacted with proteins or lipids.

Nucleotide-Bearing Benzylidene-Tetrahydroxanthylium Near-IR Fluorophore for Sensing DNA Replication, Secondary Structures and Interactions

Thymidine triphosphate bearing benzylidene‐tetrahydroxanthylium near‐IR fluorophore linked to the 5‐methyl group via triazole was synthesized through the CuAAC reaction and was used for polymerase synthesis of labelled DNA probes. The fluorophore lights up upon incorporation to DNA (up to 348‐times) presumably due to interactions in major groove and the fluorescence further increases in the single‐stranded oligonucleotide. The labelled dsDNA senses binding of small molecules and proteins by a strong decrease of fluorescence. The nucleotide was used as a light‐up building block in real‐time PCR for detection of SARS‐CoV‐2 virus.

Fluorogenic D-amino acids enable real-time monitoring of peptidoglycan biosynthesis and high-throughput transpeptidation assays

Peptidoglycan (PG) is an essential cell wall component that maintains the morphology and viability of nearly all bacteria. Its biosynthesis requires periplasmic transpeptidation reactions which construct peptide cross-linkages between polysaccharide chains to endow mechanical strength. However, tracking transpeptidation reaction in vivo and in vitro is challenging, mainly due to the lack of efficient, biocompatible probes. Here, we report the design, synthesis, and application of rotor-fluorogenic D-amino acids (RfDAAs) enabling real-time, continuous tracking of transpeptidation reactions. These probes enable monitoring PG biosynthesis in real time through visualizing transpeptidase reactions in live cells, as well as real-time activity assays of D,D-, L,D-transpeptidases, and sortases in vitro. The unique ability of RfDAAs to become fluorescent when incorporated into PG provides a powerful new tool to study PG biosynthesis with high temporal resolution and prospectively enable high-throughput screening for inhibitors of PG biosynthesis.

2-Allyl- and Propargylamino-dATPs for Site-Specific Enzymatic Introduction of a Single Modification in the Minor Groove of DNA

A series of 2-alkylamino-2'-deoxyadenosine triphosphates (dATP) was prepared and found to be substrates for the Therminator DNA polymerase, which incorporated only one modified nucleotide into the primer. Using a template encoding for two consecutive adenines, conditions were found for incorporation of either one or two modified nucleotides. In all cases, addition of a mixture of natural dNTPs led to primer extension resulting in site-specific single modification of DNA in the minor groove. The allylamino-substituted DNA was used for the thiol-ene addition, whereas the propargylamino-DNA for the CuAAC click reaction was used to label the DNA with a fluorescent dye in the minor groove. The approach was used to construct FRET probes for detection of oligonucleotides.

Self-Priming Enzymatic Fabrication of Multiply Modified DNA

The self-priming synthesis of multiply modified DNA by the extension of repeating unit duplex "oligoseeds" provides a source of versatile DNA. Sterically-demanding nucleotides 5-Br-dUTP, 7-deaza-7-I-dATP, 6-S-dGTP, 5-I-dCTP as well as 5-(octadiynyl)-dCTP were incorporated into two extending oligoseeds; [GATC]₅ /[GATC]₅ and [A₄ G]₄ /[CT₄ ]₄ . The products contained modifications on one or both strands of DNA, demonstrating their recognition by the polymerase as both template (reading) and substrate (writing). Nucleobase modifications that lie in the major groove were reliably read and written by the polymerase during the extension reaction, even when bulky or in contiguous sequences. Repeat sequence DNA over 500 bp long, bearing four different modified units was produced by this method. The number, position and type of modification, as well as the overall length of the DNA can be controlled to yield designer DNA that offers sequence-determined sites for further chemical adaptations, targeted small molecule binding studies, or sensing and sequencing applications.

Fluorescence-Lifetime-Sensitive Probes for Monitoring ATP Cleavage

Adenosine triphosphate (ATP) probes modified with fluorescence dyes that change their fluorescence properties upon cleavage are an interesting tool for monitoring enzymatic ATP turnover. As a readout parameter, fluorescence lifetime is attractive because it is nearly independent of concentration. In our study, we synthesised and investigated fifteen different ATP analogues, in which the fluorophores were attached to the γ-phosphate of ATP. All analogues showed distinctly different fluorescence lifetimes compared to the corresponding values of the free fluorophores. Both increases and decreases in fluorescence lifetime were observed upon attachment to ATP. To shed light on the photophysical processes governing the lifetime changes, we performed photoelectron spectroscopy in air (PESA) to determine HOMO energy levels and time-resolved fluorescence spectroscopy to obtain rate constants. We present evidence that fluorescence quenching in the compounds tested is dynamic and attributed to photoinduced electron transfer (PET), whereas fluorescence lifetime increases are caused by stacking interactions between chromophore and the nucleobase reducing non-radiative relaxation. Finally, we demonstrate that enzymatic cleavage of the ATP analogues presented can be followed by continuous monitoring of fluorescence lifetime changes.

Porphyrinoid biohybrid materials as an emerging toolbox for biomedical light management

The present article reviews the most important developing strategies in light-induced nanomedicine, based on the combination of porphyrinoid photosensitizers with a wide variety of biomolecules and biomolecular assemblies.

Photoluminescence Lifetime Imaging of Synthesized Proteins in Living Cells Using an Iridium-Alkyne Probe

Designing probes for real-time imaging of dynamic processes in living cells is a continuous challenge. Herein, a novel near-infrared (NIR) photoluminescence probe having a long lifetime was exploited for photoluminescence lifetime imaging (PLIM) using an iridium-alkyne complex. This probe offers the benefits of deep-red to NIR emission, a long Stokes shift, excellent cell penetration, low cytotoxicity, and good resistance to photobleaching. This example is the first PLIM probe applicable to the click reaction of copper(I)-catalyzed azide-alkyne cycloaddition (CuAAC) with remarkable lifetime shifts of 414 ns, before and after click reaction. The approach fully eliminates the background interference and distinguishes the reacted probes from the unreacted probes, thus enabling the wash-free imaging of the newly synthesized proteins within single living cells. Based on the unique properties of the iridium complexes, it is anticipated to have applications for imaging other processes within living cells.

Development of a Vivid FRET System Based on a Highly Emissive dG-dC Analogue Pair

A new type of Förster Resonance Energy Transfer (FRET) system using highly emissive isomorphic nucleobase analogues is reported. The FRET pair consists of 2-aminothieno[3,4-d]pyrimidine G-mimic deoxyribonucleoside (^th dG) as an energy donor and 1,3-diaza-2-oxophenothiazine (tC) as an energy acceptor. The distance and orientation between donor and acceptor was controlled by systematic incorporation of ^th dG and tC into DNA sequences to investigate the FRET efficiencies. This is the first Watson-Crick base-pairable FRET pair to produce vivid colors. In addition, this nucleic acid-based FRET pair was used to monitor DNA conformation and achieved visualization of the B-Z transition.

Facile Access to Twisted Intramolecular Charge-Transfer Fluorogens Bearing Highly Pretwisted Donor-Acceptor Systems Together with Readily Fine-Tuned Charge-Transfer Characters

Twisted intramolecular charge-transfer (TICT) fluorogens bearing highly pretwisted geometries and readily-fine-tuned charge-transfer characters are quite promising sensor and electroluminescence (EL) materials. In this study, by using 4-aryloxy-1,8-naphthalimide derivatives as the molecular framework, it is demonstrated for the first time that a CO bond could serve as the central bond to construct new TICT D-A systems. Photophysical and quantum chemical studies confirm that rotation around central CO bonds is responsible for the formation of a stable TICT state in these compounds. More importantly, owing to the structural adjustability of the aryl moiety and the strong steric interactions between the naphthalimide and the aryl ring systems, these compounds can display readily-fine-tuned TICT characters, hence exhibiting an adjustable solvent polarity threshold for aggregation-induced emission (AIE) activity, and could be AIE-active even in less-polar toluene and nonpolar cyclohexane. Furthermore, these compounds could possess highly-pretwisted ground-state geometries, hence could show good EL performance. The findings reveal a facile but effective molecular constructive strategy for versatile, high-performance optoelectronic TICT compounds.

Development of a novel lysosome-targetable time-gated luminescence probe for ratiometric and luminescence lifetime detection of nitric oxide in vivo

Rapid, multiplexed, sensitive and specific identification and quantitative detection of nitric oxide (NO) are in great demand in biomedical science. Herein, a novel multifunctional probe based on the intramolecular LRET (luminescence resonance energy transfer) strategy, TRP-NO, was designed for the highly sensitive and selective ratiometric and luminescence lifetime detection of lysosomal NO. Before reaction with NO, the emission of the rhodamine moiety in TRP-NO is switched off, which prevents the LRET process, so that the probe emits only the long-lived Tb3+ luminescence. However, upon reaction with NO, accompanied by the turn-on of rhodamine emission, the LRET from the Tb3+-complex moiety to rhodamine moiety occurs, which results in a remarkable increase of the rhodamine emission and decrease of the Tb3+ emission. After the reaction, the intensity ratio of the rhodamine emission to the Tb3+ emission, I565/I540, was found to be 28.8-fold increased, and the dose-dependent enhancement of the I565/I540 value showed a good linearity upon the increase of NO concentration. In addition, a dose-dependent luminescence lifetime decrease was distinctly observed between the average luminescence lifetime of the probe and NO concentration, which provides a ∼10-fold contrast window for the detection of NO. These unique properties allowed TRP-NO to be conveniently used as a time-gated luminescence probe for the quantitative detection of NO using both luminescence intensity ratio and luminescence lifetime as signals. The applicability of TRP-NO for ratiometric time-gated luminescence imaging of NO in living cells was investigated. Meanwhile, dye co-localization studies confirmed a quite precise distribution of TRP-NO in lysosomes by confocal microscopy imaging. Furthermore, the practical applicability of TRP-NO was demonstrated by the visualization of NO in Daphnia magna. All of the results demonstrated that TRP-NO could serve as a useful tool for exploiting and elucidating the function of NO at sub-cellular levels with high specificity, accuracy and contrast.

2-Substituted dATP Derivatives as Building Blocks for Polymerase-Catalyzed Synthesis of DNA Modified in the Minor Groove

2'-Deoxyadenosine triphosphate (dATP) derivatives bearing diverse substituents (Cl, NH₂ , CH₃ , vinyl, ethynyl, and phenyl) at position 2 were prepared and tested as substrates for DNA polymerases. The 2-phenyl-dATP was not a substrate for DNA polymerases, but the dATPs bearing smaller substituents were good substrates in primer-extension experiments, producing DNA substituted in the minor groove. The vinyl-modified DNA was applied in thiol-ene addition and the ethynyl-modified DNA was applied in a CuAAC click reaction to form DNA labelled with fluorescent dyes in the minor groove.