Polyboramines for Hydrogen Release: Polymers Containing Lewis Pairs in their Backbone

1,6;2,3-Bis-BN Cyclohexane: Synthesis, Structure, and Hydrogen Release

BN/CC isosterism has been widely investigated as a strategy to expand carbon-based compounds. The introduction of BN units in organic molecules always results in novel properties. In this work, we reported the first synthesis and characterization of 1,6;2,3-bis-BN cyclohexane, an isostere of cyclohexane with two adjacent BN pairs. Its ring flipping barrier is similar to that of cyclohexane. Protic hydrogens on N in 1,6;2,3-bis-BN cyclohexane show higher reactivity than its isomeric bis-BN cyclohexane. This compound exhibits an appealing hydrogen storage capability of >9.0 wt %, nearly twice as much as the 1,2;4,5-bis-BN cyclohexane.

Magnesocenophane-Catalyzed Amine Borane Dehydrocoupling

The Lewis acidities of a series of [n]magnesocenophanes (1 a–d) have been investigated computationally and found to be a function of the tilt of the cyclopentadienyl moieties. Their catalytic abilities in amine borane dehydrogenation/dehydrocoupling reactions have been probed, and C[1]magnesocenophane (1 a) has been shown to effectively catalyze the dehydrogenation/dehydrocoupling of dimethylamine borane (2 a) and diisopropylamine borane (2 b) under ambient conditions. Furthermore, the mechanism of the reaction with 2 a has been investigated experimentally and computationally, and the results imply a ligand‐assisted mechanism involving stepwise proton and hydride transfer, with dimethylaminoborane as the key intermediate.

Tunable Hydrogen Release from Amine-Boranes via their Insertion into Functional Polystyrenes

Polystyrene-g-boramine random copolymers are dihydrogen reservoirs with tunable dehydrogenation temperatures, which can be adjusted by selecting the boramine content in the copolymers. They display a unique dihydrogen thermal release profile, which is a direct consequence of the insertion of the amine-boranes in a polymeric scaffold, and not from a direct modification of the electronics or sterics of the amine-borane function. Finally, the mixture of polystyrene-g-boramines with conventional NH₃ -BH₃ (borazane) allows for a direct access to organic/inorganic hybrid dihydrogen reservoirs with a maximal H₂ loading of 8 wt %. These exhibit a dehydrogenation temperature lower than that of either the borazane or the polystyrene-g-boramines taken separately.

BN- and BO-Doped Inorganic-Organic Hybrid Polymers with Sulfoximine Core Units

While polysulfones constitute a class of well-established, highly valuable applied materials, knowledge about polymers based on the related sulfoximine group is very limited. We have employed functionalized diaryl sulfoximines and a p-phenylene bisborane as building blocks for unprecedented BN- and BO-doped alternating inorganic-organic hybrid copolymers. While the former were accessed by a facile silicon/boron exchange protocol, the synthesis of polymers with main-chain B-O linkages was achieved by salt elimination.

Amine-Borane Dehydrogenation and Transfer Hydrogenation Catalyzed by α-Diimine Cobaltates

Anionic α-diimine cobalt complexes, such as [K(thf)_1.5 {(^Dipp BIAN)Co(η⁴ -cod)}] (1; Dipp=2,6-diisopropylphenyl, cod=1,5-cyclooctadiene), catalyze the dehydrogenation of several amine-boranes. Based on the excellent catalytic properties, an especially effective transfer hydrogenation protocol for challenging olefins, imines, and N-heteroarenes was developed. NH₃ BH₃ was used as a dihydrogen surrogate, which transferred up to two equivalents of H₂ per NH₃ BH₃ . Detailed spectroscopic and mechanistic studies are presented, which document the rate determination by acidic protons in the amine-borane.

Iron Precatalysts with Bulky Tri(tert-butyl)cyclopentadienyl Ligands for the Dehydrocoupling of Dimethylamine-Borane

In an attempt to prepare new Fe catalysts for the dehydrocoupling of amine-boranes and to provide mechanistic insight, the paramagnetic Fe^II dimeric complex [Cp'FeI]₂ (1) (Cp'=η⁵ -((1,2,4-tBu)₃ C₅ H₂ )) was used as a precursor to a series of cyclopentadienyl Fe^II and Fe^III mononuclear species. The complexes prepared were [Cp'Fe(η⁶ -Tol)][Cp'FeI₂ ] (2) (Tol=C₆ H₅ Me), [Cp'Fe(η⁶ -Tol)][BAr^F₄ ] (3) (BAr^F₄ =[B(C₆ H₃ (m-CF₃ )₂ )₄ ]^- ), [N(nBu)₄ ][Cp'FeI₂ ] (4), Cp'FeI₂ (5), and [Cp'Fe(MeCN)₃ ][BAr^F₄ ] (6). The electronic structure of the [Cp'FeI₂ ]^- anion in 2 and 4 was investigated by SQUID magnetometry, EPR spectroscopy and ab initio Complete Active Space Self Consistent Field-Spin Orbit (CASSCF-SO) calculations, and the studies revealed a strongly anisotropic S=2 ground state. Complexes 1-6 were investigated as catalysts for the dehydrocoupling of Me₂ NH⋅BH₃ (I) in THF at 20 °C to yield the cyclodiborazane product [Me₂ N-BH₂ ]₂ (IV). Complexes 1-4 and 6 were active dehydrocoupling catalysts towards I (5 mol % loading), however 5 was inactive, and ultra-violet (UV) irradiation was required for the reaction mediated by 3. Complex 6 was found to be the most active precatalyst, reaching 80 % conversion to IV after 19 h at 22 °C. Dehydrocoupling of I by 1-4 proceeded via formation of the aminoborane Me₂ N=BH₂ (II) as the major intermediate, whereas for 6 the linear diborazane Me₂ NH-BH₂ -NMe₂ -BH₃ (III) could be detected, together with trace amounts of II. Reactions of 1 and 6 with Me₃ N⋅BH₃ were investigated in an attempt to identify Fe-based intermediates in the catalytic reactions. The σ-complex [Cp'Fe(MeCN)(κ² -H₂ BH⋅NMe₂ H][BAr^F₄ ] was proposed to initially form in dehydrocoupling reactions involving 6 based on ESI-MS (ESI=Electrospray Ionisation Mass Spectroscopy) and NMR spectroscopic evidence. The latter also suggests that these complexes function as precursors to iron hydrides which may be the true catalytic species.

From Monodisperse Thienyl- and Furylborane Oligomers to Polymers: Modulating the Optical Properties through the Hetarene Ratio

The application of our newly developed B-C coupling method by catalytic Si/B exchange is demonstrated for the synthesis of a series of triarylboranes (1), monodisperse thienyl- and furylborane dimers (2) and trimers (9), extended oligomers (3) and polymers (3'), as well as mixed (oligo)thienyl-/furylboranes. The structures of 1 aa^Tip , 1 bb^Tip , and 2 bbb^Mes* , determined by X-ray crystallography, reveal largely coplanar hetarene rings and BR₃ environments, which are most pronounced in the furylborane species. Photophysical investigations, supported by TD-DFT calculations, revealed pronounced π-electron delocalization over the hetarene backbones including the boron centers. With an extended series of derivatives of varying chain lengths available, we were able to determine the effective conjugation lengths (ECL) of poly(thienylborane)s and poly(furylborane)s, which have been reached with the highest-molecular-weight derivatives of our study. Through variation of the furan-to-thiophene ratio, the photophysical properties of these materials are effectively modulated. Significantly, higher furan contents lead to considerably increased fluorescence intensities. Compounds 1 aa^Tip , 1 bb^Tip , and 3 a^Tip showed the ability to bind fluoride anions. The binding process is signaled by a distinct change in their optical absorption characteristics, thus rendering these materials attractive targets for sensory applications.

Depolymerization of Poly(phosphinoboranes): From Polymers to Lewis Base Stabilized Monomers

We report on depolymerization reactions of poly(phosphinoboranes). The cleavage of the polymers [H₂ PBH₂ ]_n (2 a), [tBuHPBH₂ ]_n (2 c), [PhHPBH₂ ]_n (2 e) and the oligomer [Ph₂ PBH₂ ]_n (2 b), with strong Lewis bases (LBs), in particular with NHCs, leads to the corresponding monomeric phosphanylboranes R¹ R² PBH₂ LB. It is observed that the depolymerization depends on the strength and stability of the LBs as well as on the substitution pattern of the poly(phosphinoboranes). The solid state structures of the monomeric phosphinoboranes H₂ PBH₂ NHC^Me (NHC=N-heterocyclic carbene) (4 a), H₂ PBH₂ NHC^dipp (5 a) and tBuHPBH₂ NHC^Me (4 c) were determined. DFT calculations support the experimentally observed reaction behavior.

Dehydrocoupling and Silazane Cleavage Routes to Organic-Inorganic Hybrid Polymers with NBN Units in the Main Chain

Despite the great potential of both π-conjugated organoboron polymers and BN-doped polycyclic aromatic hydrocarbons in organic optoelectronics, our knowledge of conjugated polymers with B-N bonds in their main chain is currently scarce. Herein, the first examples of a new class of organic-inorganic hybrid polymers are presented, which consist of alternating NBN and para-phenylene units. Polycondensation with B-N bond formation provides facile access to soluble materials under mild conditions. The photophysical data for the polymer and molecular model systems of different chain lengths reveal a low extent of π-conjugation across the NBN units, which is supported by DFT calculations. The applicability of the new polymers as macromolecular polyligands is demonstrated by a cross-linking reaction with Zr(IV) .