A Rainbow Structural-Color Chip for Multisaccharide Recognition

Thermal Responsive Photonic Crystal Achieved through the Control of Light Path Guided by Phase Transition

Responsive photonic crystal is widely considered in the field of anti-counterfeiting and information encryption because of their structural color changes caused by external stimulation. However, the response signal is usually achieved by adjusting the periodic lattice constant based on Bragg's law with volume changes. Thus, it is a great challenge to achieve the response of photonic crystals by non-array parameter control. Herein, novel thermal responsive photonic crystal (TRPC) with low angle dependent structural color is fabricated by introducing poly(ethylene glycol) into the structure of low angle dependent SnO₂ inverse opal. The response is achieved through the control of light path guided by phase transition and the significant volume change caused by the change of traditional array parameters can be effectively avoided. Meanwhile, the low angle dependent structural color of TRPC can effectively reduce the interference of observation angle change to response signal caused by external thermal stimulation. Patterned responsive photonic crystals with temperature gradient response are easily obtained by combining confinement self-assembly and direct template method, and the patterns can be presented and hidden by the control of light path, showing great potential in anti-counterfeiting and information encryption fields.

Hydrophobic Poly(tert-butyl acrylate) Photonic Crystals towards Robust Energy-Saving Performance

Photonic crystals (PCs) have been widely applied in optical, energy, and biological fields owing to their periodic crystal structure. However, the major challenges are easy cracking and poor structural color, seriously hindering their practical applications. Now, hydrophobic poly(tert-butyl acrylate) (P(t-BA)) PCs have been developed with relatively lower glass transition temperature (T_g ), large crack-free area, excellent hydrophobic properties, and brilliant structure color. This method based on hydrophobic groups (tertiary butyl groups) provides a reference for designing new kinds of PCs via the monomers with relatively lower T_g . Moreover, the P(t-BA) PCs film were applied as the photoluminescence (PL) enhanced film to enhance the PL intensity of CdSe@ZnS QDs by 10-fold in a liquid-crystal display (LCD) device. The new-type hydrophobic force assembled PCs may open an innovative avenue toward new-generation energy-saving devices.

Bio-inspired transparent structural color film and its application in biomimetic camouflage

The transparent wings of insects with intelligent structural colors or good invisibility in different surroundings provide them with unique camouflage capability for protection and information exchange. Inspired by the existence of ordered biological nanostructures on the surface of the wings, freestanding composite photonic crystal (PC) films were prepared by infiltrating polydimethylsiloxane (PDMS, n = 1.41) into the interstices of a highly ordered opal PC using poly(methyl methacrylate) (PMMA, n = 1.49) spheres as building blocks. The appropriate refractive index contrast (Δn = 0.08) endowed the composite film with high transparency and vivid structural colors. Consequently, the PC film was invisible in shaded surroundings and showed brilliant structural color under sunlight. Also, 186, 229 and 257 nm PMMA spheres were used to obtain composite PC films with different structural colors. Moreover, as a proof of concept, a biomimetic dragonfly-shaped film was fabricated using a patterned substrate. When it was placed on a green tree under sunlight, abundant structural colors appeared at different specular viewing angles. However, it camouflaged in the environment when the shadows of the green tree shielded the sunlight or when viewed in non-specular angles with sunshine. This unique property indicated their potential applications in biomimetic camouflage and smart stealth materials for bionic machines.

Manipulating Luminescence of Light Emitters by Photonic Crystals

The modulation of luminescence is essential because unwanted spontaneous-emission modes have a negative effect on the performance of luminescence-based photonic devices. Photonic crystals are promising materials for the control of light emission because of the variation in the local density of optical modes within them. They have been widely investigated for the manipulation of the emission intensity and lifetime of light emitters. Several groups have achieved greatly enhanced emission by depositing emitters on the surface of photonic crystals. Herein, the different modulating effects of photonic crystal dimensions, light-emitter positions, photonic crystal structure type, and the refractive index of photonic crystal building blocks are highlighted, with the aim of evaluating the fundamental principles that determine light propagation. The applications of using photonic crystals to manipulate spontaneous emission in light-emitting diodes and sensors are also reviewed. In addition, potential future challenges and improvements in this field are presented.

Dual-Mode, Anisotropy-Encoded, Ratiometric Fluorescent Nanosensors: Towards Multiplexed Detection

A nanosensor with dual-mode fluorescence response to pH and an encoded identification signal, was developed by exploiting excitation energy transfer and tailored control of molecular organization in core-shell nanoparticles. Multiple signals were acquired in a simple single-excitation dual-emission channels set-up.

Structurally colored polymer films with narrow stop band, high angle-dependence and good mechanical robustness for trademark anti-counterfeiting

The photonic stop bands of colloidal crystals appear as structural colors, which are potentially useful for display devices, colorimetric sensors, optical filters, paints, and photonic papers. However, low durability and pale colors caused by the undesired scattering of light seriously limit their practical applications. In this article, a polydimethylsiloxane (PDMS)/photonic crystal (PC)/PDMS sandwich structure was designed as a free standing structural colored film with good durability and brilliant color. The monodispersed polystyrene (PS) spheres were self-assembled on the hydrophobic PDMS surface to facilitate the integrity of the assembled structure and then, PDMS with a refractive index of 1.41 was filled in the gaps between the PS spheres (nPS = 1.59), replacing air (nair = 1). The surface was finally covered with a thin layer of PS PCs, forming a continuous and free standing PC film. The continuous feature of the composite PC can greatly improve their mechanical properties. At the same time, the lower index contrast results in narrow reflection peaks for the composite films, which indicates that higher color purity and brightness could be achieved. Clearly distinguished, vivid structural colors can be observed between red to green or green to blue by tuning the viewing angle from 5° to 50° for films composed of PS spheres with diameters of 247 nm or 209 nm, respectively. They can also be easily patterned by spraying methods and embedded as a trademark on clothes. Patterns with different structural colors at different angle can be clearly be observed under sunlight, which makes them potentially useful as security materials.

Patterned Colloidal Photonic Crystals

Colloidal photonic crystals (PCs) have been well developed because they are easy to prepare, cost-effective, and versatile with regards to modification and functionalization. Patterned colloidal PCs contribute a novel approach to constructing high-performance PC devices with unique structures and specific functions. In this review, an overview of the strategies for fabricating patterned colloidal PCs, including patterned substrate-induced assembly, inkjet printing, and selective immobilization and modification, is presented. The advantages of patterned PC devices are also discussed in detail, for example, improved detection sensitivity and response speed of the sensors, control over the flow direction and wicking rate of microfluidic channels, recognition of cross-reactive molecules through an array-patterned microchip, fabrication of display devices with tunable patterns, well-arranged RGB units, and wide viewing-angles, and the ability to construct anti-counterfeiting devices with different security strategies. Finally, the perspective of future developments and challenges is presented.

An Overview of the Development of Flexible Sensors

Flexible sensors that efficiently detect various stimuli relevant to specific environmental or biological species have been extensively studied due to their great potential for the Internet of Things and wearable electronics applications. The application of flexible and stretchable electronics to device-engineering technologies has enabled the fabrication of slender, lightweight, stretchable, and foldable sensors. Here, recent studies on flexible sensors for biological analytes, ions, light, and pH are outlined. In addition, contemporary studies on device structure, materials, and fabrication methods for flexible sensors are discussed, and a market overview is provided. The conclusion presents challenges and perspectives in this field.