Elemental Boron for Efficient Carbon Dioxide Reduction under Light Irradiation

Impact of preparation method on nickel speciation and methane dry reforming performance of Ni/SiO2 catalysts

The methane dry reforming reaction can simultaneously convert two greenhouse gases (CH₄ and CO₂), which has significantly environmental and economic benefits. Nickel-based catalysts have been widely used in methane dry reforming in past decade due to their low cost and high activity. However, the sintering and coke deposition of catalysts severely limit their industrial applications. In this paper, three Ni/SiO₂ catalysts prepared by different methods were systematically studied, and the samples obtained by the ammonia evaporation method exhibited excellent catalytic performance. The characterization results such as H₂-TPR, XPS and TEM confirmed that the excellent performance was mainly attributed to the catalyst with smaller Ni particles, stronger metal-support interactions, and abundant Ni-O-Si units on the catalyst surface. The anti-sintering/-coking properties of the catalyst were significantly improved. However, the Ni/SiO₂-IM catalyst prepared by impregnation method had uneven distribution of nickel species and large particles, and weak metal-support interactions, showing poor catalytic performance in methane dry reforming. Since the nickel species were encapsulated by the SiO₄ tetrahedral network, the Ni/SiO₂-SG catalyst prepared by sol-gel method could not expose more effective active sites even if the nickel species were uniformly dispersed, resulting in poor dry reforming performance. This study provides guidance for the preparation of novel anti-sintering/-coking nickel-based catalysts.

Engineering Heterostructured Nanocatalysts for CO2 Transformation Reactions: Advances and Perspectives

As a conceivable route to achieving anthropological carbon looping, carbon capture and utilization (CCU) technologies employ waste CO₂ as an accessible C1 building block to generate upgraded chemicals or fuels, thereby simultaneously remedying environmental issues and energy crises. However, efficient CO₂ conversion is disfavored by both its thermodynamics and its kinetics. Heterostructured materials with well-controlled interfaces have great potential for enhanced catalytic performance in various CO₂ transformation reactions, owing to the synergistic effects among components, numerous interfacial and/or surface active sites, increased CO₂ adsorption capacity, promoted charge transfer efficiency, and unique physicochemical properties. This Review highlights the state of the art in typical heterostructures, such as core-shell, yolk-shell, Janus, hierarchical (branched and hollow), and 2D/2D layered structures, applied for CO₂ conversion with various energy inputs (radiation, electricity, heat). Fabrication methods of different heterostructures and structure-composition-performance relationships are also discussed concisely. Finally, a brief summary and prospective research directions are provided. The motivation of this Review is to offer instructive information on the applicability of inorganic heterostructures for CO₂ transformation reactions, and it is hoped that further enlightening studies in this field could emerge in the future.

Coupling of Solar Energy and Thermal Energy for Carbon Dioxide Reduction: Status and Prospects

Enormous efforts have been devoted to the reduction of carbon dioxide (CO₂ ) by utilizing various driving forces, such as heat, electricity, and radiation. However, the efficient reduction of CO₂ is still challenging because of sluggish kinetics. Recent pioneering studies from several groups, including us, have demonstrated that the coupling of solar energy and thermal energy offers a novel and promising strategy to promote the activity and/or manipulate selectivity in CO₂ reduction. Herein, we clarify the definition and principles of coupling solar energy and thermal energy, and comprehensively review the status and prospects of CO₂ reduction by coupling solar energy and thermal energy. Catalyst design, reactor configuration, photo-mediated activity/selectivity, and mechanism studies in photo-thermo CO₂ reduction will be emphasized. The aim of this Review is to promote understanding towards CO₂ activation and provide guidelines for the design of new catalysts for the efficient reduction of CO₂ .

A Covalent Triazine-Based Framework Consisting of Donor-Acceptor Dyads for Visible-Light-Driven Photocatalytic CO2 Reduction

Photocatalytic conversion of CO₂ into value-added chemical fuels is a promising approach to address the depletion of fossil energy and environment-related concerns. Tailor-making the electronic properties and band structures of photocatalysts is pivotal to improve their efficiency and selectivity in photocatalytic CO₂ reduction. Herein, a covalent triazine-based framework was developed containing electron-donor triphenylamine and electron-acceptor triazine components (DA-CTF). The engineered π-conjugated electron donor-acceptor dyads in DA-CTF not only optimized the optical bandgap but also contributed to visible-light harvesting and migration of photoexcited charge carriers. The activity of photocatalytic CO₂ reduction under visible light was significantly improved compared with that of traditional g-C₃ N₄ and reported covalent triazine-based frameworks. This study provides molecular-level insights into the mechanism of photocatalytic CO₂ reduction.

Highly Selective Photoreduction of CO2 with Suppressing H2 Evolution over Monolayer Layered Double Hydroxide under Irradiation above 600 nm

Although progress has been made to improve photocatalytic CO₂ reduction under visible light (λ>400 nm), the development of photocatalysts that can work under a longer wavelength (λ>600 nm) remains a challenge. Now, a heterogeneous photocatalyst system consisting of a ruthenium complex and a monolayer nickel-alumina layered double hydroxide (NiAl-LDH), which act as light-harvesting and catalytic units for selective photoreduction of CO₂ and H₂ O into CH₄ and CO under irradiation with λ>400 nm. By precisely tuning the irradiation wavelength, the selectivity of CH₄ can be improved to 70.3 %, and the H₂ evolution reaction can be completely suppressed under irradiation with λ>600 nm. The photogenerated electrons matching the energy levels of photosensitizer and m-NiAl-LDH only localized at the defect state, providing a driving force of 0.313 eV to overcome the Gibbs free energy barrier of CO₂ reduction to CH₄ (0.127 eV), rather than that for H₂ evolution (0.425 eV).

Defects Promote Ultrafast Charge Separation in Graphitic Carbon Nitride for Enhanced Visible-Light-Driven CO2 Reduction Activity

Fundamental photocatalytic limitations of solar CO₂ reduction remain due to low efficiency, serious charge recombination, and short lifetime of catalysts. Herein, two-dimensional graphitic carbon nitride nanosheets with nitrogen vacancies (g-C₃ N_x ) located at both three-coordinate N atoms and uncondensed terminal NH_x species were prepared by one-step tartaric acid-assistant thermal polymerization of dicyandiamide. Transient absorption spectra revealed that the defects in g-C₃ N₄ act as trapped states of charges to result in prolonged lifetimes of photoexcited charge carriers. Time-resolved photoluminescence spectroscopy revealed that the faster decay of charges is due to the decreased interlayer stacking distance in g-C₃ N_x in favor of hopping transition and mobility of charge carriers to the surface of the material. Owing to the synergic virtues of strong visible-light absorption, large surface area, and efficient charge separation, the g-C₃ N_x nanosheets with negligible loss after 15 h of photocatalysis exhibited a CO evolution rate of 56.9 μmol g^-1  h^-1 under visible-light irradiation, which is roughly eight times higher than that of pristine g-C₃ N₄ . This work presents the role of defects in modulating light absorption and charge separation, which opens an avenue to robust solar-energy conversion performance.

Light-driven thermocatalytic CO2 reduction over surface-passivated β-Mo2C nanowires: enhanced catalytic stability by light

As compared to the thermocatalysis without light irradiation, the catalytic stability of P-Mo₂C in the light-driven thermocatalysis is significantly improved.