Surface Modification of Two‐Dimensional Metal–Organic Layers Creates Biomimetic Catalytic Microenvironments for Selective Oxidation

Catalysis with Two-Dimensional Metal-Organic Frameworks: Synthesis, Characterization, and Modulation

The demand for the exploration of highly active and durable electro/photocatalysts for renewable energy conversion has experienced a significant surge in recent years. Metal-organic frameworks (MOFs), by virtue of their high porosity, large surface area, and modifiable metal centers and ligands, have gained tremendous attention and demonstrated promising prospects in electro/photocatalytic energy conversion. However, the small pore sizes and limited active sites of 3D bulk MOFs hinder their wide applications. Developing 2D MOFs with tailored thickness and large aspect ratio has emerged as an effective approach to meet these challenges, offering a high density of exposed active sites, better mechanical stability, better assembly flexibility, and shorter charge and photoexcited state transfer distances compared to 3D bulk MOFs. In this review, synthesis methods for the most up-to-date 2D MOFs are first overviewed, highlighting their respective advantages and disadvantages. Subsequently, a systematic analysis is conducted on the identification and electronic structure modulation of catalytic active sites in 2D MOFs and their applications in renewable energy conversion, including electrocatalysis and photocatalysis (electro/photocatalysis). Lastly, the current challenges and future development of 2D MOFs toward highly efficient and practical electro/photocatalysis are proposed.

Comparative study of sonication-assisted liquid phase exfoliation of six layered coordination polymers

Sonication-assisted liquid phase exfoliation was applied to six different layered coordination polymers (CPs) in aqueous surfactant solution. The resulting nanosheets were investigated for structural and compositional integrity and microscopic analysis gives insights into the relationship between the crystal structure of the materials and their exfoliability. Larger open pores seem to favour the production of nanosheets with higher aspect ratio of lateral size to thickness.

2D MOF with Compact Catalytic Sites for the One‐pot Synthesis of 2,5‐Dimethylfuran from Saccharides via Tandem Catalysis

One pot synthesis of 2,5‐dimethylfuran (2,5‐DMF) from saccharides under mild conditions is of importance for the production of biofuel and fine chemicals. However, the synthesis requires a multitude of active sites and suffers from slow kinetics due to poor diffusion in most composite catalysts. Herein, a metal‐acid functionalized 2D metal‐organic framework (MOF; Pd/NUS‐SO₃H), as an ultrathin nanosheet of 3–4 nm with Lewis acid, Brønsted acid, and metal active sites, was prepared based on the diazo method for acid modification and subsequent metal loading. This new composite catalyst gives substantially higher yields of DMF than all reported catalysts for different saccharides (fructose, glucose, cellobiose, sucrose, and inulins). Characterization suggests that a cascade of reactions including polysaccharide hydrolysis, isomerization, dehydration, and hydrodeoxygenation takes place with rapid molecular interactions.

Two-Dimensional Metal-Organic Framework Nanosheets: Synthesis and Applications in Electrocatalysis and Photocatalysis

Two-dimensional metal-organic nanosheets (2D MONs) are an emerging class of ultrathin, porous, and crystalline materials. The organic/inorganic hybrid nature offers MONs distinct advantages over other inorganic nanosheets in terms of diversity of organic ligands and metal notes. Compared to bulk three-dimensional metal-organic frameworks, 2D MONs possess merits of high density and readily accessible catalytic sites, reduced diffusion pathways for reactants/products, and fast electron transport. These features endow MONs with enhanced physical/chemical properties and are ideal for heterogeneous catalysis. In this Review, state-of-the-art synthetic methods for the fabrication of 2D MONs were summarized. The advances of 2D MONs-based materials for electrocatalysis and photocatalysis, including hydrogen evolution reaction (HER), oxygen evolution reaction (OER), oxygen reduction reaction (ORR), carbon dioxide reduction reaction (CO₂ RR), and electro-/photocatalytic organic transformations were systematically discussed. Finally, the challenges and perspectives regarding future design and synthesis of 2D MONs for high-performance electrocatalysis and photocatalysis were provided.

Metal-organic frameworks as catalytic selectivity regulators for organic transformations

Selective organic transformations using metal-organic frameworks (MOFs) and MOF-based heterogeneous catalysts have been an intriguing but challenging research topic in both the chemistry and materials communities. Analogous to the reaction specificity achieved in enzyme pockets, MOFs are also powerful platforms for regulating the catalytic selectivity via engineering their catalytic microenvironments, such as metal node alternation, ligand functionalization, pore decoration, topology variation and others. In this review, we provide a comprehensive introduction and discussion about the role of MOFs played in regulating and even boosting the size-, shape-, chemo-, regio- and more appealing stereo-selectivity in organic transformations. We hope that it will be instructive for researchers in this field to rationally design, conveniently prepare and elaborately functionalize MOFs or MOF-based composites for the synthesis of high value-added organic chemicals with significantly improved selectivity.

Functionalization of Zirconium-Based Metal-Organic Layers with Tailored Pore Environments for Heterogeneous Catalysis

Intriguing properties and functions are expected to implant into metal-organic layers (MOLs) to achieve tailored pore environments and multiple functionalities owing to the synergies among multiple components. Herein, we demonstrate a facile one-pot synthetic strategy to incorporate multiple functionalities into stable zirconium MOLs via secondary ligand pillaring. Through the combination of Zr₆ -BTB (BTB=benzene-1,3,5-tribenzoate) layers and diverse secondary ligands (including ditopic and tetratopic linkers), 31 MOFs with multi-functionalities were systematically prepared. Notably, a metal-phthalocyanine fragment was successfully incorporated into this Zr-MOL system, giving rise to an ideal platform for the selective oxidation of anthracene. The organic functionalization of two-dimensional MOLs can generate tunable porous structures and environments, which may facilitate the excellent catalytic performance of as-synthesized materials.

2D Free-Standing Nitrogen-Doped Ni-Ni3 S2 @Carbon Nanoplates Derived from Metal-Organic Frameworks for Enhanced Oxygen Evolution Reaction

2D metal-organic frameworks (2D MOFs) are promising templates for the fabrication of carbon supported 2D metal/metal sulfide nanocomposites. Herein, controllable synthesis of a newly developed 2D Ni-based MOF nanoplates in well-defined rectangle morphology is first realized via a pyridine-assisted bottom-up solvothermal treatment of NiSO₄ and 4,4'-bipyridine. The thickness of the MOF nanoplates can be controlled to below 20 nm, while the lateral size can be tuned in a wide range with different amounts of pyridine. Subsequent pyrolysis treatment converts the MOF nanoplates into 2D free-standing nitrogen-doped Ni-Ni₃ S₂ @carbon nanoplates. The obtained Ni-Ni₃ S₂ nanoparticles encapsulated in the N-doped carbon matrix exhibits high electrocatalytic activity in oxygen evolution reaction. A low overpotential of 284.7 mV at a current density of 10 mA cm^-2 is achieved in alkaline solution, which is among the best reported performance of substrate-free nickel sulfides based nanomaterials.

HPW/PDMAEMA-b-PMAA/ZIF-8 Ternary Lamellar Composite and the Photocatalytic Degradation of Methylene Blue

PDMAEMA-b-PMAA block copolymers were prepared by the sequential RAFT polymerization of DMAEMA and tBMA, followed by hydrolysis. Phosphotungstic acid (HPW) was anchored to the PDMAEMA blocks through electrostatic interactions and the as-obtained HPW/PDMAEMA-b-PMAA was added to the synthesis of ZIF-8. During the formation of ZIF-8, the PMAA blocks coordinated to the Zn²⁺ ions through their carboxy groups, along with the HPW groups that were anchored to the PDMAEMA blocks. In this way, the block copolymer could consolidate the interactions between HPW and ZIF-8 and prevent the leakage of HPW. Finally, the HPW/PDMAEMA-b-PMAA/ZIF-8 ternary lamellar composite was obtained and the structure of the HPW/PDMAEMA-b-PMAA/ZIF-8 hybrid material was characterized by using powder X-ray diffraction (PXRD), X-ray photoelectron spectroscopy (XPS), and scanning electron microscopy (SEM). As a photocatalyst, the HPW/PDMAEMA-b-PMAA/ZIF-8 ternary lamellar composite showed excellent photoactivity for the degradation of methylene blue (MB). The rate of degradation of MB was 0.0240 min^-1 , which was 7.5-times higher than that of commercially available P25 (0.0032 min^-1 ). In the presence of H₂ O₂ , the kinetic degradation parameters of the composite reached 0.0634 min^-1 , which was about 19.8-times higher than that of P25.

Ultrasonic Exfoliation of Hydrophobic and Hydrophilic Metal-Organic Frameworks To Form Nanosheets

The modular structure of metal-organic framework nanosheets (MONs) provides a convenient route to creating two-dimensional materials with readily tuneable surface properties. Here, the liquid exfoliation of two closely related layered metal-organic frameworks functionalised with either methoxy-propyl (1) or pentyl (2) pendent groups intended to bestow either hydrophilic or hydrophobic character to the resulting nanosheets is reported. Exfoliation of the two materials in a range of different solvents highlighted significant differences in their dispersion properties, as well as their molecular and nanoscopic structures. Exchange or loss of solvent was found to occur at the labile axial position of the paddle-wheel based MONs and DFT calculations indicated that intramolecular coordination by the oxygen of the methoxy-propyl pendant groups may take place. The nanoscopic dimensions of the MONs were further tuned by varying the exfoliation conditions and through "liquid cascade centrifugation". Aqueous suspensions of the nanosheets were used as sensors to detect aromatic heterocycles with clear differences in binding behaviour observed and quantified.

Design of Single-Site Photocatalysts by Using Metal-Organic Frameworks as a Matrix

Single-site photocatalysts generally display excellent photocatalytic activity and considerably high stability compared with homogeneous catalytic systems. A rational structural design of single-site photocatalysts with isolated, uniform, and spatially separated active sites in a given solid is of prime importance to achieve high photocatalytic activity. Intense attention has been focused on the design and fabrication of single-site photocatalysts by using porous materials as a platform. Metal-organic frameworks (MOFs) have great potential in the design and fabrication of single-site photocatalysts due to their remarkable porosity, ultrahigh surface area, extraordinary tailorability, and significant diversity. MOFs can provide an abundant number of binding sites to anchor active sites, which results in a significant enhancement in photocatalytic performance. In this focus review, the development of single-site MOF photocatalysts that perform important and challenging chemical redox reactions, such as photocatalytic H2 production, photocatalytic CO2 conversion, and organic transformations, is summarized thoroughly. Successful strategies for the construction of single-site MOF photocatalysts are summarized and major challenges in their practical applications are noted.

Encapsulation of Crabtree's Catalyst in Sulfonated MIL-101(Cr): Enhancement of Stability and Selectivity between Competing Reaction Pathways by the MOF Chemical Microenvironment

Crabtree's catalyst was encapsulated inside the pores of the sulfonated MIL-101(Cr) metal-organic framework (MOF) by cation exchange. This hybrid catalyst is active for the heterogeneous hydrogenation of non-functionalized alkenes either in solution or in the gas phase. Moreover, encapsulation inside a well-defined hydrophilic microenvironment enhances catalyst stability and selectivity to hydrogenation over isomerization for substrates bearing ligating functionalities. Accordingly, the encapsulated catalyst significantly outperforms its homogeneous counterpart in the hydrogenation of olefinic alcohols in terms of overall conversion and selectivity, with the chemical microenvironment of the MOF host favouring one out of two competing reaction pathways.