Carbon-Doped BN Nanosheets for the Oxidative Dehydrogenation of Ethylbenzene

A mechanochemical process to capture and separate carbon dioxide from natural gas using boron nitride nanosheets

Addressing climate change is a critical and pressing matter that requires immediate attention to mitigate its severe repercussions. In order to enhance the capture and separation of carbon dioxide from natural gas and nitrogen gas, it is imperative to develop new capture materials and more efficient storage processes. In this study, we introduce an innovative environmentally friendly storage and separation technique. Through a controlled mechanochemical process, a substantial amount of carbon dioxide (103.6 wt%) was successfully captured within boron nitride. This process also excels at effectively isolating carbon dioxide from a gas mixture containing natural gas (CH4) or nitrogen due to its superior adsorption selectivity for CO2 over the other two gases. The stored carbon dioxide can be released upon heating, and this procedure can be repeated several times (minimum four times), indicating a game changing process in CO2 gas capture and separation technology with the advantages of green, low cost and efficiency.

C, Ge-doped h-BN quantum dot for nano-optoelectronic applications

Emerging materials, particularly nanomaterials, constitute an enduring focal point of scientific inquiry, with quantum dots being of particular interest. This investigation is centered on elucidating the exceptional structural, electromagnetic, and optical characteristics of hexagonal boron nitride (h-BN) quantum dots and h-BN quantum dots doped with carbon (C) and germanium (Ge). The employed methodology in this study hinges on density functional theory coupled with the Vienna Ab initio simulation package. The outcomes of this research unveil the structural stability of hexagonal honeycomb structures upon optimization. Comprehensive examinations encompassing structural properties, electromagnetic characteristics, and charge density variations have been systematically conducted. Furthermore, this work delves into the elucidation of multi-orbital hybridizations that give rise toσbonds andπbonds. Notably, the outcomes of the optical property analysis divulge intriguing observations. Specifically, the absorption coefficient exhibits zero values within select energy ranges within the visible light spectrum, a phenomenon observed in both pristine and C-doped configurations. This discovery underscores the material's optical transparency at these specific radiation energies. Additionally, the 0xand 0ycomponents of the dielectric function display negative values across particular energy ranges, a characteristic that holds significant promise for potential applications in nanotechnology communications, offering minimal energy loss.

Borocarbonitride-Based Emerging Materials for Supercapacitor Applications: Recent Advances, Challenges, and Future Perspectives

Supercapacitors have emerged as a promising energy storage technology due to their high-power density, fast charging/discharging capabilities, and long cycle life. Moreover, innovative electrode materials are extensively explored to enhance the performance, mainly the energy density of supercapacitors. Among the two-dimensional (2D) supercapacitor electrodes, borocarbonitride (BCN) has sparked widespread curiosity owing to its exceptional tunable properties concerning the change in concentration of the constituent elements, along with an excellent alternative to graphene-based electrodes. BCN, an advanced nanomaterial, possesses excellent electrical conductivity, chemical stability, and a large specific surface area. These factors contribute to supercapacitors' overall performance and reliability, making them a viable option to address the energy crisis. This review provides a detailed survey of BCN, its structural, electronic, chemical, magnetic, and mechanical properties, advanced synthesis methods, factors affecting the charge storage mechanism, and recent advances in BCN-based supercapacitor electrodes. The review embarks on the scrupulous elaboration of ways to enhance the electrochemical properties of BCN through various innovative strategies followed by critical challenges and future perspectives. BCN, as an eminent electrode material, holds great potential to revolutionize the energy landscape and support the growing energy demands of the future.

A tailored multi-functional catalyst for ultra-efficient styrene production under a cyclic redox scheme

Styrene is an important commodity chemical that is highly energy and CO2 intensive to produce. We report a redox oxidative dehydrogenation (redox-ODH) strategy to efficiently produce styrene. Facilitated by a multifunctional (Ca/Mn)1-xO@KFeO2 core-shell redox catalyst which acts as (i) a heterogeneous catalyst, (ii) an oxygen separation agent, and (iii) a selective hydrogen combustion material, redox-ODH auto-thermally converts ethylbenzene to styrene with up to 97% single-pass conversion and >94% selectivity. This represents a 72% yield increase compared to commercial dehydrogenation on a relative basis, leading to 82% energy savings and 79% CO2 emission reduction. The redox catalyst is composed of a catalytically active KFeO2 shell and a (Ca/Mn)1-xO core for reversible lattice oxygen storage and donation. The lattice oxygen donation from (Ca/Mn)1-xO sacrificially stabilizes Fe3+ in the shell to maintain high catalytic activity and coke resistance. From a practical standpoint, the redox catalyst exhibits excellent long-term performance under industrially compatible conditions.

B-MWW Zeolite: The Case Against Single-Site Catalysis

Boron-containing materials have recently been identified as highly selective catalysts for the oxidative dehydrogenation (ODH) of alkanes to olefins. It has previously been demonstrated by several spectroscopic characterization techniques that the surface of these boron-containing ODH catalysts oxidize and hydrolyze under reaction conditions, forming an amorphous B₂ (OH)_x O_(3-x/2) (x=0-6) layer. Yet, the precise nature of the active site(s) remains elusive. In this Communication, we provide a detailed characterization of zeolite MCM-22 isomorphously substituted with boron (B-MWW). Using ¹¹ B solid-state NMR spectroscopy, we show that the majority of boron species in B-MWW exist as isolated BO₃ units, fully incorporated into the zeolite framework. However, this material shows no catalytic activity for ODH of propane to propene. The catalytic inactivity of B-MWW for ODH of propane falsifies the hypothesis that site-isolated BO₃ units are the active site in boron-based catalysts. This observation is at odds with other traditionally studied catalysts like vanadium-based catalysts and provides an important piece of the mechanistic puzzle.

B-O Bonds in Ultrathin Boron Nitride Nanosheets to Promote Photocatalytic Carbon Dioxide Conversion

Limited by the chemical inertness of CO₂ and the high dissociation energy of the C═O bond, photocatalytic CO₂ conversion is highly challenging. Herein, we prepare ultrathin oxygen-modified h-BN (O/BN) nanosheets containing B-O bonds. On the O/BN surface, CO₂ can be chemically captured and is bonded with the B-O bond, leading to the formation of an O-B-O bond. This new chemical bond acting as an electron-delivery channel strengthens the interaction between CO₂ and the surface. Thus, the reactants can continuously obtain electrons from the surface through this channel. Therefore, the majority of gaseous CO₂ directly converts into carbon active species that are detected by in situ DRIFTS over O/BN. Moreover, the activated energies of CO₂ conversion are significantly reduced with the introduction of the B-O bond evidenced by DFT calculations. As a result, O/BN nanosheets present an enhanced photocatalytic CO₂ conversion performance with the H₂ and CO generation rates of 3.3 and 12.5 μmol g^-1 h^-1, respectively. This work could help in realizing the effects of nonmetal chemical bonds in the CO₂ photoreduction reaction for designing efficient photocatalysts.

A Mechanochemical-Assisted Synthesis of Boron, Nitrogen Co-Doped Porous Carbons as Metal-Free Catalysts

A green and convenient solid-state method assisted by mechanical energy is employed for the synthesis of boron (B) and nitrogen (N) co-doped porous carbons (B,N-Cs). Glutamic acid (Glu) and boric acid (H₃ BO₃ ) are used as the N-containing carbon precursor and boron source, respectively. This method is easy to perform and proved to be efficient towards co-doping B and N into the carbon matrix with high contents of B (7 atom %) and N (10 atom %). By adjusting the molar ratio of H₃ BO₃ to Glu, the surface chemical states of B and N could be readily modulated. When increasing H₃ BO₃ dosage, the pore size of B,N-Cs could be tuned ranging from micropores to mesopores with a Brunauer-Emmett-Teller (BET) surface area up to 940 m²  g^-1 . Finally, the B,N-Cs were applied as metal-free catalysts for the cycloaddition of CO₂ to epoxides, which outperform the N-doped carbon catalyst (NC-900) and the physically mixed catalyst of NC-900/B₄ C. The enhanced activity is attributed to the cooperative effect between B and N sites. X-ray photoelectron spectroscopy (XPS) analysis reveals that BN₃ in the B,N-Cs serves as a critical active site for the cooperative catalysis.

An Organic Molecular Photocatalyst Releasing Oxygen from Water

Artificial photosynthesis employing solar energy is one of the best means of reaching a sustainable energy cycle, in which water is oxidized to oxygen and supplies electrons for fuel generation. The development of suitable oxygen evolution materials driven by sunlight is hence the most challenging research topic in the field of photocatalysis. Herein, photocatalytic O₂ production from water at a rate of 22.6 μmol h^-1 was performed by using a pyrene-based organic molecule constructed through the Ullmann coupling reaction. Its significantly improved light-harvesting ability and notably accelerated separation and transfer of photogenerated charges enhanced the O₂ evolution efficiency. This study highlights the structural design of organic molecules applied to photocatalytic water splitting.

A single boron atom doped boron nitride edge as a metal-free catalyst for N2 fixation

The first-principle theory has been used to predict a new metal-free single atom electrocatalyst for N₂ reduction.

Structure-Mediated Charge Separation in Boron Carbon Nitride for Enhanced Photocatalytic Oxidation of Alcohol

Boron carbon nitride (BCN) is a promising earth-abundant photocatalyst for solar energy conversion. However, the photocatalytic activities of BCN materials remain moderate because of the fast electron-hole recombination. Herein, an ordered BCN structure is fabricated by a facile one-step thermal treatment strategy. The ordered structure of BCN is directly evident from powder X-ray diffraction and high-resolution transmission electron microscopy. Importantly, it is found that the long-period ordered structure can intrinsically accelerate the separation and transfer kinetics of photogenerated charge carriers. Benefiting from these advantages, the ordered BCN structure exhibits remarkable performance for photoinduced selective oxidation of benzyl alcohol compared with the pristine BCN counterpart. This work highlights the important role of the crystal structure of light-harvesting materials in affecting electron-hole separation and at the same time points to the ample potential for improving the photocatalytic performance.

Preparation of Boron Nitride Nanoparticles with Oxygen Doping and a Study of Their Room-Temperature Ferromagnetism

In this work, oxygen-doped boron nitride nanoparticles with room-temperature ferromagnetism have been synthesized by a new, facile, and efficient method. There are no metal magnetic impurities in the nanoparticles analyzed by X-ray photoelectron spectroscopy. The boron nitride nanoparticles exhibit a parabolic shape with increase in the reaction time. The saturation magnetization value reaches a maximum of 0.2975 emu g^-1 at 300 K when the reaction time is 12 h, indicating that the Curie temperature ( T_C) is higher than 300 K. Combined with first-principles calculation, the coupling between B 2p orbital, N 2p orbital, and O 2p orbital in the conduction bands is the main origin of room-temperature ferromagnetism and also proves that the magnetic moment changes according the oxygen-doping content change. Compared with other room temperature ferromagnetic semiconductors, boron nitride nanoparticles have widely potential applications in spintronic devices because of high temperature oxidation resistance and excellent chemical stability.

Green Synthesis of Boron Carbonitride with High Capacitance

Boron carbonitrides (BCN) have attracted great interest in superhard or energy storage materials. In this work, thin BCN sheets were synthesized at 250 °C by a facile and green solvothermal method. The structure and morphology were characterized by X-ray diffraction (XRD), Raman spectroscopy, X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). Based on the results of electrochemical experiments, the thin BCN sheet exhibited excellent capacitance performance (343.1 F/g at a current density of 0.5 A/g) and cycling stability (90%), which showed high potential applications in supercapacitors.

Synthesis and Characterization of "Ravine-Like" BCN Compounds with High Capacitance

A series of "ravine-like" boron carbonitrides (abbreviation: BCN) were synthesized by a green precursor pyrolysis method at different temperatures (about 700-1100 °C). The highest electrochemical performance of BCN-800 (Named BCN-temperature) electrode was observed, because the "ravine-like" structure can significantly increase the contact area and improve the wettability between electrode and electrolyte. The BCN electrode exhibited ultrahigh specific capacitance 805.9 F/g (at a current density of 0.2 A/g), excellent rate capability, and good cycling stability (91%) after 3000 cycles at a current density of 8 A/g, showing high potential applications in supercapacitors.

The role of potassium in the activation of oxygen to promote nitric oxide oxidation on honeycomb-like h-BN(001) surfaces

The oxidation reactions of NO on K-doped h-BN(001) surfaces.