How Water Accelerates Bivalent Ion Diffusion at the Electrolyte/Electrode Interface

Ethylene Glycol-Choline Chloride Based Hydrated Deep Eutectic Electrolytes Enabled High-Performance Zinc-Ion Battery

Aqueous rechargeable zinc-ion batteries (ARZIBs) are considered as an emerging energy storage technology owing to their low cost, inherent safety, and reasonable energy density. However, significant challenges associated with electrodes, and aqueous electrolytes restrict their rapid development. Herein, ethylene glycol-choline chloride (Eg-ChCl) based hydrated deep-eutectic electrolytes (HDEEs) are proposed for RZIBs. Also, a novel V10O24·nH2O@rGO composite is prepared and investigated in combination with HDEEs. The formulated HDEEs, particularly the composition of 1 ml of EG, 0.5 g of ChCl, 4 ml of H2O, and 2 M ZnTFS (1-0.5-4-2 HDEE), not only exhibit the lowest viscosity, highest Zn2+ conductivity (20.38 mS cm-1), and the highest zinc (Zn) transference number (t+ = 0.937), but also provide a wide electrochemical stability window (>3.2 V vs ZnǁZn2+) and enabledendrite-free Zn stripping/plating cycling over 1000 hours. The resulting ZnǁV10O24·nH2O@rGO cell with 1-0.5-4-2 HDEE manifests high reversible capacity of ≈365 mAh g-1 at 0.1 A g-1, high rate-performance (delivered ≈365/223 mAh g-1 at 0.1/10 mA g-1) and enhanced cycling performance (≈63.10% capacity retention in the 4000th cycle at 10 A g-1). Furthermore, 1-0.5-4-2 HDEE support feasible Zn-ion storage performance across a wide temperature range (0-80 °C) FInally, a ZnǁV10O24·nH2O@rGO pouch-cell prototype fabricated with 1-0.5-4-2 HDEE demonstrates good flexibility, safety, and durability.

Monolithic Phosphate Interphase for Highly Reversible and Stable Zn Metal Anode

Zinc metal battery (ZMB) is promising as the next generation of energy storage system, but challenges relating to dendrites and corrosion of the zinc anode are restricting its practical application. Here, to stabilize Zn anode, we report a controlled electrolytic method for a monolithic solid-electrolyte interphase (SEI) via a high dipole moment solvent dimethyl methylphosphonate (DMMP). The DMMP-based electrolytes can generate a homogeneous and robust phosphate SEI (Zn₃ (PO₄ )₂ and ZnP₂ O₆ ). Benefiting from the protecting impact of this in situ monolithic SEI, the zinc electrode exhibits long-term cycling of 4700 h and a high Coulombic efficiency 99.89 % in Zn|Zn and Zn|Cu cell, respectively. The full V₂ O₅ |Zn battery with DMMP-H₂ O hybrid electrolyte exhibits a high capacity retention of 82.2 % following 4000 cycles under 5 A g^-1 . The first success in constructing the monolithic phosphate SEI will open a new avenue in electrolyte design for highly reversible and stable Zn metal anodes.

Recent Progress on Phosphate Cathode Materials for Aqueous Zinc-Ion Batteries

Rechargeable zinc-ion batteries (ZIBs) are attractive for large-scale energy storage due to their superiority in resources, safety, and environmental friendliness. However, the lack of suitable ZIBs cathode materials limits their practical applications. In consideration of the excellent electrochemical performance of phosphate materials in monovalent ion (Li⁺ , Na⁺ ) batteries, they were also employed as ZIBs cathode materials recently and performed well with high potential. But they also suffer from low capacity and poor conductivity, and the energy storage mechanism is not clear yet. This Review provides a state-of-the art overview on the developments of phosphate cathode materials in ZIBs, including NASICON-type phosphates, fluorophosphates, olivine-structured, layered-structured, and novel-structured phosphate materials mainly. This study presents the reaction mechanism and electrochemical performance of phosphate cathode materials in aqueous ZIBs, and future research directions are discussed, which are intended to provide guidance for exploring high-potential cathode materials for ZIBs.

Effect of Binding Affinity of Crystal Water on the Electrochemical Performance of Layered Double Hydroxides

The ever-increasing demand for safe batteries has driven research efforts to develop aqueous rechargeable batteries. In this regard, Ni-based layered double hydroxides (LDHs) have received marked attention owing to their adequate operating potential, high specific capacity, and decent cycling performance. Nevertheless, the effect of immobile intercalants (e. g., crystal water and anions) that are inherently present in the interlayer galleries is barely understood. In this paper, we report that the electrochemical performance of LDH largely depends on the extent to which the crystallinity is affected by the binding strength of crystal water to the transition metal slabs. A series of infrared spectroscopy and in-situ X-ray absorption analyses reveal that the lattice disordering in LDHs is beneficial for accommodating the stress during the (de)intercalation of carrier ions, which serves as the origin of their superior specific capacities and cycle life. This study presents a useful structure-property relationship of the way in which the binding affinity of crystal water affects the key electrochemical properties of the host electrode materials.

The Development of Vanadyl Phosphate Cathode Materials for Energy Storage Systems: A Review

Various cathode materials have been proposed for high-performance rechargeable batteries. Vanadyl phosphate is an important member of the polyanion cathode family. VOPO₄ has seven known crystal polymorphs with tunneled or layered frameworks, which allow facile cation (de)intercalations. Two-electron transfer per formula unit can be realized by using V^V /V^IV and V^IV /V^III redox couples. The electrochemical performance is closely related to the structures of VOPO₄ and the types of inserted cations. This Review outlines the crystal structures of VOPO₄ polymorphs and their lithiated phases. The research progress of vanadyl phosphate cathode materials for different energy storage systems, including lithium-ion batteries, sodium-ion batteries, potassium-ion batteries, multivalent batteries, and supercapacitors, as well as the related mechanism investigations are summarized. It is hoped that this Review will help with future directions of using vanadyl phosphate materials for energy storage.

Inhibiting VOPO4 ⋅x H2 O Decomposition and Dissolution in Rechargeable Aqueous Zinc Batteries to Promote Voltage and Capacity Stabilities

VOPO₄ ⋅x H₂ O has been proposed as a cathode for rechargeable aqueous zinc batteries. However, it undergoes significant voltage decay in conventional Zn(OTf)₂ electrolyte. Investigations show the decomposition of VOPO₄ ⋅x H₂ O into VO_x in the electrolyte and voltage drops after losing the inductive effect from polyanions.PO₄ ^3- was thus added to shift the decomposition equilibrium. A high concentration of cheap, highly soluble ZnCl₂ salt in the electrolyte further prevents VOPO₄ ⋅x H₂ O dissolution. The cathode shows stable capacity and voltage retentions in 13 m ZnCl₂ /0.8 m H₃ PO₄ aqueous electrolyte, in direct contrast to that in Zn(OTf)₂ where the decomposition product VO_x provides most electrochemical activity over cycling. Sequential H⁺ and Zn²⁺ intercalations into the structure are revealed, delivering a high capacity (170 mAh g^-1 ). This work shows the potential issue with polyanion cathodes in zinc batteries and proposes an effective solution using fundamental chemical principles.