Organoantimony Dihydroperoxides: Synthesis, Crystal Structures, and Hydrogen Bonding Networks

Despite growing interest in the potential applications of p-block hydroperoxo complexes, the chemistry of inorganic hydroperoxides remains largely unexplored. For instance, single-crystal structures of antimony hydroperoxo complexes have not been reported to date. Herein, we present the synthesis of six triaryl and trialkylantimony dihydroperoxides [Me₃Sb(OOH)₂, Me₃Sb(OOH)₂·H₂O, Ph₃Sb(OOH)₂·0.75(C₄H₈O), Ph₃Sb(OOH)₂·2CH₃OH, pTol₃Sb(OOH)₂, pTol₃Sb(OOH)₂·2(C₄H₈O)], obtained by the reaction of the corresponding dibromide antimony(V) complexes with an excess of highly concentrated hydrogen peroxide in the presence of ammonia. The obtained compounds were characterized by single-crystal and powder X-ray diffraction, Fourier transform infrared and Raman spectroscopies, and thermal analysis. The crystal structures of all six compounds reveal hydrogen-bonded networks formed by hydroperoxo ligands. In addition to the previously reported double hydrogen bonding, new types of hydrogen-bonded motifs formed by hydroperoxo ligands were found, including infinite hydroperoxo chains. Solid-state density functional theory calculation of Me₃Sb(OOH)₂ revealed reasonably strong hydrogen bonding between OOH ligands with an energy of 35 kJ/mol. Additionally, the potential application of Ph₃Sb(OOH)₂·0.75(C₄H₈O) as a two-electron oxidant for the enantioselective epoxidation of olefins was investigated in comparison with Ph₃SiOOH, Ph₃PbOOH, t-BuOOH, and H₂O₂.

Generation of FeIV =O and its Contribution to Fenton-Like Reactions on a Single-Atom Iron-N-C Catalyst

Generating Fe^IV =O on single-atom catalysts by Fenton-like reaction has been established for water treatment; however, the Fe^IV =O generation pathway and oxidation behavior remain obscure. Employing an Fe-N-C catalyst with a typical Fe-N₄ moiety to activate peroxymonosulfate (PMS), we demonstrate that generating Fe^IV =O is mediated by an Fe-N-C-PMS* complex-a well-recognized nonradical species for induction of electron-transfer oxidation-and we determined that adjacent Fe sites with a specific Fe₁ -Fe₁ distance are required. After the Fe atoms with an Fe₁ -Fe₁ distance <4 Å are PMS-saturated, Fe-N-C-PMS* formed on Fe sites with an Fe₁ -Fe₁ distance of 4-5 Å can coordinate with the adjacent Fe^II -N₄ , forming an inter-complex with enhanced charge transfer to produce Fe^IV =O. Fe^IV =O enables the Fenton-like system to efficiently oxidize various pollutants in a substrate-specific, pH-tolerant, and sustainable manner, where its prominent contribution manifests for pollutants with higher one-electron oxidation potential.

Oxoiron(IV)-dominated Heterogeneous Fenton-like Mechanism of Fe-Doped MoS2

Oxoiron(IV) species are a critical intermediate in the Fe-based Fenton-like process at circumneutral pH, and its oxidative reactivity is closely related to the ligands. An optional inorganic host material, MoS₂ , is selected to construct a highly reactive sulfur ligand coordinated Fe species in this work. The Fe species doped in MoS₂ is presented as the Fe^II centre and triggers the transformation of the 2H phase to the octahedral 1T phase MoS₂ . The role of the interaction between doped Fe and the MoS₂ host lattice on the formation of oxoiron(IV) is studied. A significant Fenton-like reactivity and a remarkable accumulation of oxoiron(IV) species were observed for Fe-MoS₂ . The quenching experiment was implemented to disclose the predominant role of oxoiron(IV) species in the Fe-MoS₂ /H₂ O₂ Fenton-like system. Furthermore, oxoiron(IV) species could transform into the ⋅O₂ ^- and ¹ O₂ , which further expedites the Fenton-like reaction.

Heterolytic O-O Bond Cleavage Upon Single Electron Transfer to a Nonheme Fe(III)-OOH Complex

The one-electron reduction of the nonheme iron(III)-hydroperoxo complex, [FeIII (OOH)(L5 2 )]2+ (L5 2 =N-methyl-N,N',N'-tris(2-pyridylmethyl)ethane-1,2-diamine), carried out at -70 °C results in the release of dioxygen and in the formation of [FeII (OH)(L5 2 )]+ following a bimolecular process. This reaction can be performed either with cobaltocene as chemical reductant, or electrochemically. These experimental observations are consistent with the disproportionation of the hydroperoxo group in the putative FeII (OOH) intermediate generated upon reduction of the FeIII (OOH) starting complex. One plausible mechanistic scenario is that this disproportionation reaction follows an O-O heterolytic cleavage pathway via a FeIV -oxo species.

Remote Amino Acid Recognition Enables Effective Hydrogen Peroxide Activation at a Manganese Oxidation Catalyst

Precise delivery of a proton plays a key role in O2 activation at iron oxygenases, enabling the crucial O-O cleavage step that generates the oxidizing high-valent metal-oxo species. Such a proton is delivered by acidic residues that may either directly bind the iron center or lie in its second coordination sphere. Herein, a supramolecular strategy for enzyme-like H2 O2 activation at a biologically inspired manganese catalyst, with a nearly stoichiometric amount (1-1.5 equiv) of a carboxylic acid is disclosed. Key for this strategy is the incorporation of an α,ω-amino acid in the second coordination sphere of a chiral catalyst via remote ammonium-crown ether recognition. The properly positioned carboxylic acid function enables effective activation of hydrogen peroxide, leading to catalytic asymmetric epoxidation. Modulation of both amino acid and catalyst structure can tune the efficiency and the enantioselectivity of the reaction, and a study on the oxidative degradation pathway of the system is presented.

Second-sphere effects on H2O2 activation by non-heme FeII complexes: role of a phenol group in the [H2O2]-dependent accumulation of FeIVO vs. FeIIIOOH

Redox metalloenzymes achieve very selective oxidation reactions under mild conditions using O2 or H2O2 as oxidants and release harmless side-products like water. Their oxidation selectivity is intrinsically linked to the control of the oxidizing species generated during the catalytic cycle. To do so, a second coordination sphere is used in order to create a pull effect during the activation of O2 or H2O2, thus ensuring a heterolytic O-O bond cleavage. Herein, we report the synthesis and study of a new non-heme FeII complex bearing a pentaazadentate first coordination sphere and a pendant phenol group. Its reaction with H2O2 generates the classical FeIIIOOH species at high H2O2 loading. But at low H2O2 concentrations, an FeIVO species is generated instead. The formation of the latter is directly related to the presence of the 2nd sphere phenol group. Kinetic, variable temperature and labelling studies support the involvement of the attached phenol as a second coordination sphere moiety (weak acid) during H2O2 activation. Our results suggest a direct FeII → FeIVO conversion directed by the 2nd sphere phenol via the protonation of the distal O atom of the FeII/H2O2 adduct leading to a heterolytic O-O bond cleavage.

Lignin Biodegradation by a Cytochrome P450 Enzyme: A Computational Study into Syringol Activation by GcoA

A recently characterized cytochrome P450 isozyme GcoA activates lignin components through a selective O-demethylation or alternatively an acetal formation reaction. These are important reactions in biotechnology and, because lignin is readily available; it being the main component in plant cell walls. In this work we present a density functional theory study on a large active site model of GcoA to investigate syringol activation by an iron(IV)-oxo heme cation radical oxidant (Compound I) leading to hemiacetal and acetal products. Several substrate-binding positions were tested and full energy landscapes calculated. The study shows that substrate positioning determines the product distributions. Thus, with the phenol group pointing away from the heme, an O-demethylation is predicted, whereas an initial hydrogen-atom abstraction of the weak phenolic O-H group would trigger a pathway leading to ring-closure to form acetal products. Predictions on how to engineer P450 GcoA to get more selective product distributions are given.

Fe2+/HClO Reaction Produces FeIVO2+: An Enhanced Advanced Oxidation Process

The reaction between Fe²⁺ and HClO constitutes a promising advanced oxidation process (AOP) for removing pollutants from wastewater, and ^•OH has been considered the dominant reactive oxidant despite limited evidence for this. Herein, we demonstrate that the Fe²⁺/HClO reaction enables the production of Fe^IVO²⁺ rather than ^•OH in acid medium, a finding that is strongly supported by multiple lines of evidence. Both X-ray absorption near-edge structure spectroscopic tests and Mössbauer spectroscopic tests confirmed the appearance of Fe^IVO²⁺ as the reactive intermediate in the reaction between Fe²⁺ and HClO. The determination of Fe^IVO²⁺ generation was also derived from the methyl phenyl sulfoxide (PMSO)-based probe experiments with respect to the formation of PMSO₂ without ^•OH adducts and the density functional theory studies according to the lower energy barrier for producing Fe^IVO²⁺ compared with ^•OH. A dual-anode electrolytic system was established for the in situ generation of Fe²⁺ and HClO that allows the production of Fe^IVO²⁺. The system exhibits an enhanced capacity for oxidizing a model pollutant (e.g., phosphite) from industrial wastewater, making it an attractive and promising AOP for the abatement of aqueous contaminants.

Bio-inspired Nonheme Iron Oxidation Catalysis: Involvement of Oxoiron(V) Oxidants in Cleaving Strong C-H Bonds

Nonheme iron enzymes generate powerful and versatile oxidants that perform a wide range of oxidation reactions, including the functionalization of inert C-H bonds, which is a major challenge for chemists. The oxidative abilities of these enzymes have inspired bioinorganic chemists to design synthetic models to mimic their ability to perform some of the most difficult oxidation reactions and study the mechanisms of such transformations. Iron-oxygen intermediates like iron(III)-hydroperoxo and high-valent iron-oxo species have been trapped and identified in investigations of these bio-inspired catalytic systems, with the latter proposed to be the active oxidant for most of these systems. In this Review, we highlight the recent spectroscopic and mechanistic advances that have shed light on the various pathways that can be accessed by bio-inspired nonheme iron systems to form the high-valent iron-oxo intermediates.

A designed second-sphere hydrogen-bond interaction that critically influences the O-O bond activation for heterolytic cleavage in ferric iron-porphyrin complexes

Heme hydroperoxidases catalyze the oxidation of substrates by H2O2. The catalytic cycle involves the formation of a highly oxidizing species known as Compound I, resulting from the two-electron oxidation of the ferric heme in the active site of the resting enzyme. This high-valent intermediate is formed upon facile heterolysis of the O-O bond in the initial FeIII-OOH complex. Heterolysis is assisted by the histidine and arginine residues present in the heme distal cavity. This chemistry has not been successfully modeled in synthetic systems up to now. In this work, we have used a series of iron(iii) porphyrin complexes (FeIIIL2(Br), FeIIIL3(Br) and FeIIIMPh(Br)) with covalently attached pendent basic groups (pyridine and primary amine) mimicking the histidine and arginine residues in the distal-pocket of natural heme enzymes. The presence of pendent basic groups, capable of 2nd sphere hydrogen bonding interactions, leads to almost 1000-fold enhancement in the rate of Compound I formation from peracids relative to analogous complexes without these residues. The short-lived Compound I intermediate formed at cryogenic temperatures could be detected using UV-vis electronic absorption spectroscopy and also trapped to be unequivocally identified by 9 GHz EPR spectroscopy at 4 K. The broad (2000 G) and axial EPR spectrum of an exchange-coupled oxoferryl-porphyrin radical species, [FeIV[double bond, length as m-dash]O Por˙+] with g eff ⊥ = 3.80 and g eff ‖ = 1.99, was observed upon a reaction of the FeIIIL3(Br) porphyrin complex with m-CPBA. The characterization of the reactivity of the FeIII porphyrin complexes with a substrate in the presence of an oxidant like m-CPBA by UV-vis electronic absorption spectroscopy showed that they are capable of oxidizing two equivalents of inorganic and organic substrate(s) like ferrocene, 2,4,6-tritertiary butyl phenol and o-phenylenediamine. These oxidations are catalytic with a turnover number (TON) as high as 350. Density Functional Theory (DFT) calculations show that the mechanism of O-O bond activation by 2nd sphere hydrogen bonding interaction from these pendent basic groups, which are protonated by a peracid, involves polarization of the O-O σ-bond, leading to lowering of the O-O σ*-orbital allowing enhanced back bonding from the iron center. These results demonstrate how inclusion of 2nd sphere hydrogen bonding interaction can play a critical role in O-O bond heterolysis.

Highly Selective and Catalytic Oxygenations of C-H and C=C Bonds by a Mononuclear Nonheme High-Spin Iron(III)-Alkylperoxo Species

The reactivity of a mononuclear high-spin iron(III)-alkylperoxo intermediate [Fe^III (t-BuL^Urea )(OOCm)(OH₂ )]²⁺ (2), generated from [Fe^II (t-BuL^Urea )(H₂ O)(OTf)](OTf) (1) [t-BuL^Urea =1,1'-(((pyridin-2-ylmethyl)azanediyl)bis(ethane-2,1-diyl))bis(3-(tert-butyl)urea), OTf=trifluoromethanesulfonate] with cumyl hydroperoxide (CmOOH), toward the C-H and C=C bonds of hydrocarbons is reported. 2 oxygenates the strong C-H bonds of aliphatic substrates with high chemo- and stereoselectivity in the presence of 2,6-lutidine. While 2 itself is a sluggish oxidant, 2,6-lutidine assists the heterolytic O-O bond cleavage of the metal-bound alkylperoxo, giving rise to a reactive metal-based oxidant. The roles of the urea groups on the supporting ligand, and of the base, in directing the selective and catalytic oxygenation of hydrocarbon substrates by 2 are discussed.