Dimension‐Matched Zinc Phthalocyanine/BiVO 4 Ultrathin Nanocomposites for CO 2 Reduction as Efficient Wide‐Visible‐Light‐Driven Photocatalysts via a Cascade Charge Transfer

Innovative dual-active sites in interfacially engineered interfaces for high-performance S-scheme solar-driven CO2 photoreduction

The realization of 2D/2D Van der Waals (VDW) heterojunctions represents an advanced approach to achieving superior photocatalytic efficiency. However, electron transfer through Van der Waals heterojunctions formed via ex-situ assembly encounters significant challenges at the interface due to contrasting morphologies and potential barriers among the nanocomposite substituents. Herein, a novel approach is presented, involving the insertion of a phosphate group between copper phthalocyanine (CuPc) and B-doped and N-deficient g-C3N4 (BDCNN), to design and construct a Van der Waals heterojunction labeled as xCu[acs]/yP-BDCNN. The introduction of phosphate as a charge modulator and efficient conduit for charge transfer within the heterojunction resulted in the elimination of spatial barriers and induced electron movement from BDCNN to CuPc in the excited states. Consequently, the catalytic central Cu2+ in CuPc captured the photoelectrons, leading to the conversion of CO2 to C2H4, CO and CH4. Remarkably, this approach resulted in a 78-fold enhancement in photocatalytic efficiency compared to pure BDCNN. Moreover the findings confirm that the 2D-2D 4Cu[acs]/9P-BDCNN sheet-like heterojunction effectively boosts photocatalytic activity for persistent pollutants such as methyl orange (MO), methylene blue (MB), rhodamine B (RhB), and tetracycline antibiotics (TCs). The introduction of "interfacial interacting" substances to establish an electron transfer pathway presents a novel and effective strategy for designing photocatalysts capable of efficiently reducing CO2 into valuable products.

Elucidating protonation pathways in CO2 photoreduction using the kinetic isotope effect

The surge in anthropogenic CO2 emissions from fossil fuel dependence demands innovative solutions, such as artificial photosynthesis, to convert CO2 into value-added products. Unraveling the CO2 photoreduction mechanism at the molecular level is vital for developing high-performance photocatalysts. Here we show kinetic isotope effect evidence for the contested protonation pathway for CO2 photoreduction on TiO2 nanoparticles, which challenges the long-held assumption of electron-initiated activation. Employing isotopically labeled H2O/D2O and in-situ diffuse reflectance infrared Fourier transform spectroscopy, we observe H+/D+-protonated intermediates on TiO2 nanoparticles and capture their inverse decay kinetic isotope effect. Our findings significantly broaden our understanding of the CO2 uptake mechanism in semiconductor photocatalysts.

Improved Visible-Light Photocatalytic H2 Evolution of G-C3N4 Nanosheets by Constructing Heterojunctions with Nano-Sized Poly(3-Thiophenecarboxylic Acid) and Coordinating Fe(III)

It is highly desirable to enhance the photogenerated charge separation of g-C₃N₄ by constructing efficient heterojunctions, especially with an additional organic constitution for solar-hydrogen conversion. Herein, g-C₃N₄ nanosheets have been modified controllably with nano-sized poly(3-thiophenecarboxylic acid) (PTA) through in situ photopolymerization and then coordinated with Fe(III) via the -COOH groups of modified PTA, forming an interface of tightly contacted nanoheterojunctions between the Fe(III)-coordinated PTA and g-C₃N₄. The resulting ratio-optimized nanoheterojunction displays a ~4.6-fold enhancement of the visible-light photocatalytic H₂ evolution activity compared to bare g-C₃N₄. Based on the surface photovoltage spectra, measurements of the amount of •OH produced, photoluminescence (PL) spectra, photoelectrochemical curves, and single-wavelength photocurrent action spectra, it was confirmed that the improved photoactivity of g-C₃N₄ is attributed to the significantly promoted charge separation by the transfer of high-energy electrons from the lowest unoccupied molecular orbital (LUMO) of g-C₃N₄ to the modified PTA via the formed tight interface, dependent on the hydrogen bond interaction between the -COOH of PTA and the -NH₂ of g-C₃N₄, and the continuous transfer to the coordinated Fe(III) with -OH favorable for connection with Pt as the cocatalyst. This study demonstrates a feasible strategy for solar-light-driven energy production over the large family of g-C₃N₄ heterojunction photocatalysts with exceptional visible-light activities.

Synergistic Functionality of Dopants and Defects in Co-Phthalocyanine/B-CN Z-Scheme Photocatalysts for Promoting Photocatalytic CO2 Reduction Reactions

The realization of solar-light-driven CO₂  reduction reactions (CO₂ RR) is essential for the commercial development of renewable energy modules and the reduction of global CO₂ emissions. Combining experimental measurements and theoretical calculations, to introduce boron dopants and nitrogen defects in graphitic carbon nitride (g-C₃ N₄ ), sodium borohydride is simply calcined with the mixture of g-C₃ N₄ (CN), followed by the introduction of ultrathin Co phthalocyanine through phosphate groups. By strengthening H-bonding interactions, the resultant CoPc/P-BNDCN nanocomposite showed excellent photocatalytic CO₂ reduction activity, releasing 197.76 and 130.32 µmol h^-1  g^-1 CO and CH₄ , respectively, and conveying an unprecedented 10-26-time improvement under visible-light irradiation. The substantial tuning is performed towards the conduction and valance band locations by B-dopants and N-defects to modulate the band structure for significantly accelerated CO₂ RR. Through the use of ultrathin metal phthalocyanine assemblies that have a lot of single-atom sites, this work demonstrates a sustainable approach for achieving effective photocatalytic CO₂ activation. More importantly, the excellent photoactivity is attributed to the fast charge separation via Z-scheme transfer mechanism formed by the universally facile strategy of dimension-matched ultrathin (≈4 nm) metal phthalocyanine-assisted nanocomposites.

Highly Efficient and Selective Photocatalytic Nonoxidative Coupling of Methane to Ethylene over Pd-Zn Synergistic Catalytic Sites

Photocatalytic nonoxidative coupling of CH4 to multicarbon (C2+) hydrocarbons (e.g., C2H4) and H2 under ambient conditions provides a promising energy-conserving approach for utilization of carbon resource. However, as the methyl intermediates prefer to undergo self-coupling to produce ethane, it is a challenging task to control the selective conversion of CH4 to higher value-added C2H4. Herein, we adopt a synergistic catalysis strategy by integrating Pd-Zn active sites on visible light-responsive defective WO3 nanosheets for synergizing the adsorption, activation, and dehydrogenation processes in CH4 to C2H4 conversion. Benefiting from the synergy, our model catalyst achieves a remarkable C2+ compounds yield of 31.85 μmol·g-1·h-1 with an exceptionally high C2H4 selectivity of 75.3% and a stoichiometric H2 evolution. In situ spectroscopic studies reveal that the Zn sites promote the adsorption and activation of CH4 molecules to generate methyl and methoxy intermediates with the assistance of lattice oxygen, while the Pd sites facilitate the dehydrogenation of methoxy to methylene radicals for producing C2H4 and suppress overoxidation. This work demonstrates a strategy for designing efficient photocatalysts toward selective coupling of CH4 to higher value-added chemicals and highlights the importance of synergistic active sites to the synergy of key steps in catalytic reactions.

Photocatalytic Water-Splitting by Organic Conjugated Polymers: Opportunities and Challenges

The future challenges associated with the shortage of fossil fuels and their current environmental impacts intrigued the researchers to look for alternative ways of generating green energy. Solar-driven water splitting into oxygen and hydrogen is one of those advanced strategies. Researchers have studied various semiconductor materials to achieve potential results. However, it encountered multiple challenges such as high cost, low photostability and efficiency, and required multistep modifications. The conjugated polymers (CPs) have emerged as promising alternatives for conventional inorganic semiconductors. The CPs offer low cost, sufficient light absorption efficiency, excellent photo and chemical stability, and molecular optoelectronic tunable characteristics. Furthermore, organic CPs also present higher flexibility to tune the basic framework of the backbone of the polymers, amendments in the sidechain to incorporate desired functionalities, and much-needed porosity to serve better for photocatalytic applications. This review article summarizes the recent advancements made in visible-light-driven water splitting covering the aspects of synthetic strategies and experimental parameters employed for water splitting reactions with special emphasis on conjugated polymers such as linear CPs, planarized CPs, graphitic carbon nitride (g-C₃ N₄ ), conjugated microporous polymers (CMPs), covalent organic frameworks (COFs), and conjugated polymer-based nanocomposites (CPNCs). The current challenges and future prospects have also been described briefly.

Highly Durable and Fully Dispersed Cobalt Diatomic Site Catalysts for CO2 Photoreduction to CH4

Dual-atom-site catalysts (DACs) have emerged as a new frontier in heterogeneous catalysis because the synergistic effect between adjacent metal atoms can promote their catalytic activity while maintaining the advantages of single-atom-site catalysts, such as almost 100 % atomic efficiency and excellent hydrocarbon selectivity. In this study, cobalt-based atom site catalysts with a Co₂ -N coordination structure were synthesized and used for photodriven CO₂ reduction. The resulting CoDAC containing 3.5 % Co atoms demonstrated a superior atom ratio for CO₂ reduction catalytic performance, with 65.0 % CH₄ selectivity, which far exceeds that of cobalt-based single-atom-site catalysts (CoSACs). The intrinsic reason for the superior activity of CoDACs is the excellent adsorption strength of CO₂ and CO* intermediates at dimeric Co active sites.

Highly Selective Production of Ethanol Over Hierarchical Bi@Bi2 MoO6 Composite via Bicarbonate-Assisted Photocatalytic CO2 Reduction

Photocatalytic CO₂ reduction is a sustainable and inexpensive method to solve the energy crisis and the greenhouse effect. However, the major stumbling blocks such as poor product selectivity, low yield of the multi-carbon products, and serious recombination of electron-hole pairs hinder practical application of photocatalysts. Herein, a high-performance Bi@Bi₂ MoO₆ photocatalyst, Bi nanoparticles grown on the surface of Bi₂ MoO₆ nanosheets with oxygen vacancies, was fabricated via a simple solvothermal approach. Benefiting from the abundant active sites and effective separation of photogenerated carriers of Bi₂ MoO₆ nanosheets, and the localized surface plasmon resonance effect of Bi nanoparticles, the Bi@Bi₂ MoO₆ sample exhibited great photocatalytic CO₂ reduction activity. Furthermore, adding NaHCO₃ into the system not only significantly increased the C₂ H₅ OH generation rate but also enhanced the product selectivity. In the photocatalytic measurement (0.17 mol L^-1 CO₂ -saturated NaHCO₃ solution), the highest formation rates of CO, CH₃ OH, and C₂ H₅ OH were reached at 0.85, 0.59, and 17.93 μmol g^-1  h^-1 (≈92 % selectivity), respectively.

Energy Platform for Directed Charge Transfer in the Cascade Z-Scheme Heterojunction: CO2 Photoreduction without a Cocatalyst

A universal strategy is developed to construct a cascade Z‐Scheme system, in which an effective energy platform is the core to direct charge transfer and separation, blocking the unexpected type‐II charge transfer pathway. The dimension‐matched (001)TiO₂‐g‐C₃N₄/BiVO₄ nanosheet heterojunction (T‐CN/BVNS) is the first such model. The optimized cascade Z‐Scheme exhibits ≈19‐fold photoactivity improvement for CO₂ reduction to CO in the absence of cocatalysts and costly sacrificial agents under visible‐light irradiation, compared with BVNS, which is also superior to other reported Z‐Scheme systems even with noble metals as mediators. The experimental results and DFT calculations based on van der Waals structural models on the ultrafast timescale reveal that the introduced T as the platform prolongs the lifetimes of spatially separated electrons and holes and does not compromise their reduction and oxidation potentials.

Photocatalytic Reduction of CO2 to CO over Quinacridone/BiVO4 Nanocomposites

Solar energy-driven photoreduction of CO₂ to energy-rich chemicals is of significance for sustainable development but challenging. Herein, quinacridone (QA)/nBiVO₄ (n=0.2-20, in which n stands for the mass ratio of BiVO₄ to QA) nanocomposites were developed for photoreduction of CO₂ . Characterization of the materials with Fourier-transform (FT)IR spectroscopy and X-ray photoelectron spectroscopy (XPS) pointed to QA/nBiVO₄ preparation via hydrogen-bonding-directed self-assembly of QA on BiVO₄ nanosheets. Using triethanolamine (TEOA) as a sacrifice reagent, QA/10BiVO₄ showed the best performance, affording CO with a production rate of 407 μmol g^-1  h^-1 , 24 times higher than those of pure QA. It was indicated that the Z-scheme charge-transfer mechanism of QA/nBiVO₄ could significantly improve the separation and transmission efficiency of photo-generated electrons and holes. This novel approach provides new insight for fabricating the composite photocatalytic materials of small molecule organic semiconductors and inorganic semiconductors with high efficiency for photocatalytic of reduction CO₂ .

Mg-O-Bridged Polypyrrole/g-C3 N4 Nanocomposites as Efficient Visible-Light Catalysts for Hydrogen Evolution

It is highly desired to improve the visible-light activity of g-C₃ N₄ for H₂ evolution by constructing closely contacted heterojunctions with conductive polymers. Herein, a polymer nanocomposite photocatalyst with high visible-light activity is fabricated successfully by coupling nanosized polypyrrole (NPPy) particles onto g-C₃ N₄ nanosheets through a simple wet-chemical process, and its visible-light activity is improved further by constructing Mg-O bridges between the NPPy and g-C₃ N₄ . The amount-optimized bridged nanocomposite displays an approximately ninefold improvement in visible-light activity compared with g-C₃ N₄ . On the basis of transient-state surface photovoltage responses, photoluminescence spectra, ^. OH amount evaluation, and photoelectrochemical curves, it is concluded that the exceptional photoactivity can be attributed to the significantly promoted charge transfer and separation along with visible photosensitization from NPPy. Interestingly, it is confirmed that the promoted charge separation depends mainly on the excited high-level electron transfer from g-C₃ N₄ to NPPy by single-wavelength photocurrent action spectra. This work provides a feasible strategy for designing polymer nano-heterojunction photocatalysts with exceptional visible-light activities.

Embedding Ultrasmall Au Clusters into the Pores of a Covalent Organic Framework for Enhanced Photostability and Photocatalytic Performance

Gold clusters loaded on various supports have been widely used in the fields of energy and biology. However, the poor photostability of Au clusters on support interfaces under prolonged illumination usually results in loss of catalytic performance. Covalent organic frameworks (COFs) with periodic and ultrasmall pore structures are ideal supports for dispersing and stabilizing Au clusters, although it is difficult to encapsulate Au clusters in the ultrasmall pores. In this study, a two-dimensional (2D) COF modified with thiol chains in its pores was prepared. With -SH groups as nucleation sites, Au nanoclusters (NCs) could grow in situ within the COF. The ultrasmall pores of the COF and the strong S-Au binding energy combine to improve the dispersibility of Au NCs under prolonged light illumination. Interestingly, Au-S-COF bridging as observed in this artificial Z-scheme photocatalytic system is deemed to be an ideal means to increase charge-separation efficiency.