Hollow spherical nano-traps using pillararene-based polymer for efficient uranium extraction from seawater

Herein, a hollow spherical pillar[5]arene-based polymer (P5-AO) adsorbent was synthesized. The P5-AO adsorbent was capable of effectively capturing uranium from simulated seawater (139.5 mg g-1) and real seawater (8.1 mg g-1). We also elucidated the uranium adsorption mechanism of P5-AOvia extended X-ray absorption fine structure (EXAFS). This study provides a novel direction for the development of uranium capture adsorbents.

Boosted charge transfer in a naturally formed Ca(Al2Si2O8)/Fe2O3 heterojunction for piezocatalytical formation of H2O2 and solidification of U(VI)

Energy and environmental issues make the generation of H2O2 and the separation of U(VI) from water very important topics. In this work, we disclosed a low-cost, high-efficiency method for separating U(VI) from water based on the naturally formed catalyst (red volcanic stone powders, RVSP) of Ca(Al2Si2O8)/Fe2O3 heterojunction through a piezocatalytic pathway induced by ultrasonication. The charges were found to be elevatedly separated due to the formation of the heterojunction. It is found that under ultrasonication, charges were effectively separated and then reacted with water to form H2O2 with a high yield of 196.7 μmol·g-1 in 4 h, which further solidifies U(VI) to form a solid of UO2O2. The removal rate of U(VI) in water reached 96 % (50 ppm) within 150 min. Furthermore, the results calculated by VASP show that the cyclic variation of the conduction bands under a cyclic force field facilitates the charge separation, and thus may promote piezocatalysis. Most importantly, the application study in real seawater indicates that U(VI) piezocatalysis based on natural minerals has great potential. This work presents a comprehensive investigation of U(VI) piezocatalysis by Ca(Al2Si2O8)/Fe2O3 and provides a new idea for piezocatalytic extraction of uranium.

Selective, rapid extraction of uranium from aqueous solution by porous chitosan-phosphorylated chitosan-amidoxime macroporous resin composite and differential charge calculation

Herein, a new porous chitosan-phosphorylated chitosan-amidoxime macroporous resin composite (PCAR) was designed and synthesized for the rapid and selective extraction of uranium resources from aqueous solution. This study showed that PCAR exhibited excellent adsorption toward uranium in a pH range of 5-9. The dynamic adsorption process aligned with the quasi-second-order kinetic model and corresponded to the chemical adsorption process. The maximum adsorption capacity was 561.28 mg·g-1 at pH 6 and 308 K. Mechanism analysis showed that the synergistic effect of the amidoxime group (-(NH2)C=N-OH), PO, and -NH2 on the PCAR surface improved the uranium adsorption performance. The differential charge density indicated that the amidoxime and phosphate groups provide lone-pair electrons for the adsorption of UO22+ and their synergistic effect improves the UO22+ adsorption performance of PCAR. The uranium distribution coefficients of PCAR and CAR are 4.6 and 2.4 times those of vanadium, respectively. These results indicate that phosphorylation can ameliorate the disadvantage of competitive vanadium adsorption of the amidoxime adsorbent. In addition, PCAR exhibits good reusability and stable adsorption capacity after five adsorption-desorption cycles. Hence, PCAR has excellent potential for uranium extraction from aqueous solution.

Nuclear waste Educator's workshop: What and how do we teach about nuclear waste?

A workshop was held at the Massachusetts Institute of Technology (MIT) on July 25th and 26th, 2022. The objective was to develop a blueprint for educating next-generation engineers and scientists about nuclear waste management and disposal, which requires knowledge from diverse disciplines, including nuclear, chemical, civil, environmental, and geological science and engineering. The 49 participants included university professors, researchers, industry experts, and government officials from different areas. First, we have developed a list of key fundamental knowledge on waste management and disposal across the nuclear fuel cycle. In addition, we discussed strategies on how to teach students with diverse backgrounds through innovative teaching strategies as well as how to attract students into this area. Through the workshop, we identified the critical needs to (1) develop community resources for nuclear waste education; (2) synthesize historical perspectives, including past contamination and the management of general hazardous waste; (3) emphasize a complete life-cycle perspective, including proper waste management as the key component for energy sustainability; (4) teach students how to communicate about the key facts and risks to technical and non-technical audiences; and (5) accelerate the use of the state-of-art-technologies to attract and retain a young workforce. Furthermore, we aim to build a diverse, inclusive community that supports students in developing their own narratives about nuclear waste, particularly in recognizing that antagonistic views have been important to improving safety and protecting public health and the environment.

Heterometallic uranyl (hydroxyethyl)iminodiacetic acid (heidi) complexes: Molecular models for U(VI) uptake in complex media

Amidoximated absorbents (AO-PAN) effectively remove U(VI) from aqueous solution, but previous studies reported more variability for complex natural waters that contain additional confounding ions and molecules. Ternary phases containing U(VI), M(III) (M = Fe(III), Al(III), Ga(III)), and organic molecules exist under these conditions and cause heterogeneous U(VI) uptake on AO-PAN. The goal of the current study is to provide additional insights into the structural features ternary complexes using N-(2-hydroxyethyl)-iminodiacetic acid (HEIDI) as the model organic chelator and explore the relevance of these species on U(VI) capture. Three model compounds ([(UO2)(Fe)2(μ3-O)(C6NO5H8)2(H2O)4] (UFe2), ([(UO2)(Al)2(μ2-OH)(C6NO5H8)2(H2O)3] (UAl2) and [(UO2)(Ga)2(μ2-OH)(C6NO5H8)2(H2O)3] (UGa2)) were characterized by single-crystal X-ray diffraction. Raman spectra of the model compounds were compared with solution data and the ternary phases were noted in the case of Al(III) and Ga(III), but not in the Fe(III) system. U(VI) adsorption onto AO-PAN was not impacted by the presence of HEIDI or the trivalent metal species.

Encapsulating Amidoximated Nanofibrous Aerogels within Wood Cell Tracheids for Efficient Cascading Adsorption of Uranium Ions

Continuous filtering adsorption has drawn growing interest in the exploration of uranium resources in seawater and reduction in the environmental risks of uraniferous wastewater from nuclear industries. For most filtering adsorbents, repeated filtration, high membrane thickness, and high pressure are normally essential to achieve both a high rejection ratio and high filtration flux. Herein cellulose fibrils were preferentially exfoliated from the lignin-poor layer of secondary cell walls of balsa wood during an in situ amidoximation process. By maintaining honeycomb-like cellular microstructures and cellulose aerogel stuffing in their cell tracheids, the resultant nanowoods showed superior mechanical properties (e.g., compressive strength ∼1.3 MPa in transverse direction) with large surface areas (∼80 m² g^-1). When their cell tracheids were aligned perpendicular to the flow and the edges sealed with a thermoset polymer, they could serve as efficient and high-pressure filtration membranes to capture aquatic uranium ions. In analogy to a typical cascading filtration system, the filtrate passed successively the layered-organized cell tracheids through abundant micropores on their cell walls, enabling a high rejection ratio of >99% and flux of ∼920 L m^-2 h^-1 under pressure up to 6 bar (membrane thickness of 2 mm). Thus, this study not only provides an in situ approach to producing robust woods with functional nanocellulose encapsulated into their cell tracheids but also offers a sustainable route for high-efficiency extraction of aqueous uranium.

Biofibrous nanomaterials for extracting strategic metal ions from water

Strategic metals play an indispensable role in the related industries. Their extraction and recovery from water are of great significance due to both their rapid consumption and environmental concern. Biofibrous nanomaterials have shown great advantages in capturing metal ions from water. Recent progress in extraction of typical strategic metal ions such as noble metal ions, nuclear metal ions, and Li-battery related metal ions is reviewed here using typical biological nanofibrils like cellulose nanofibrils, chitin nanofibrils, and protein nanofibrils, as well as their assembly forms like fibers, aerogels/hydrogels, and membranes. An overview of advances in material design and preparation, extraction mechanism, dynamics/thermodynamics, and performance improvement in the last decade is provided. And at last, we propose the current challenges and future perspectives for promoting biological nanofibrous materials toward extracting strategic metal ions in practical conditions of natural seawater, brine, and wastewater.

Nanoemulsion assembly toward vaterite mesoporous CaCO3 for high-efficient uranium extraction from seawater

Uranium extraction from seawater is particularly significant and regarded as an indispensable strategy for satisfying the increasing demand for nuclear fuel owing to the high uranium reserves (about 4.5 billion tons) in seawater, while remains great challenges due to the low concentration, the interference of various cations and the complexity of the marine environment. Thus, developing a highly efficient adsorbent with high adsorption capacity, excellent selectivity, low cost, and facile synthesis method is significant and urgently required. Inorganic materials show many advantages in adsorption such as low cost, fast response, high stability, etc, while conventionally, have poor capacity and selectivity especially in real seawater. Herein, mesoporous CaCO₃ (mCaCO₃) with vaterite phase is synthesized by a facile nanoemulsion strategy and "ready-to-use" for uranium adsorption without functionalization and post treatment. Surfactant Pluronic F127 not only assembles into reverse micelles to form mesopores, but also stabilizes the active vaterite phase. The obtained mCaCO₃ with high surface area (48.2 m²/g), interconnected mesopores (11 nm), and unique vaterite phase achieves highly efficient uranium adsorption with a maximum adsorption capacity of 850 ± 20 mg-U/g in uranium-spiked seawater and 6.5 ± 0.5 mg-U/g in 700 L of natural seawater for one week, as well as excellent selectivity, matching the state-of-the-art U adsorbents. After adsorption, mCaCO₃-U is dissolved with a simple acid elution to obtain concentrated uranyl solution for purification, avoiding the disposal of adsorbents. To the best of our knowledge, this is the first case to report mesoporous CaCO₃ for uranium adsorption from seawater with such a good performance. The facile synthesis, abundant raw materials and eco-friendly adsorption-desorption processes endow the mCaCO₃ as a promising candidate for large-scale uranium extraction from seawater.

Efficient and selective adsorption of U(VI) by succinic acid modified iron oxide adsorbent

The iron oxide surface was modified with succinic acid moiety and the adsorbent obtained, Fe-SUC, was evaluated for the adsorption of U(VI) (Uranium (VI)) from aqueous solution. The Fe-SUC was characterized by FT-IR (Fourier Transform Infrared Spectroscopy), Raman spectroscopy, thermogravimetry, X-ray diffraction, SEM-EDX (Scanning Electron Microscope - Energy-dispersive X-ray Spectroscopy), and particle size analysis. The adsorption behavior of U(VI) on Fe-SUC was studied as a function of pH, contact time, and concentration of U(VI) in the aqueous phase. The adsorption of U(VI) increased with increase in the pH of aqueous phase, and the adsorption saturation occurred at pH = 6. The kinetic data obtained for the adsorption of U(VI) on Fe-SUC were modeled with the pseudo-first-order and pseudo-second-order rate models. Similarly, the U(VI) adsorption isotherm was fitted with Langmuir, Freundlich, Temkin, and Dubinin-Radushkevich adsorption isotherm models. The Langmuir adsorption capacity of U(VI) on Fe-SUC was about ∼176 mg g−1. The selectivity of the adsorbent toward U(VI) was evaluated in the presence of several possible interfering ions. The adsorbed U(VI) was recovered by 0.5 M sodium carbonate solution and the spent adsorbent was tested for its reusability.

Confinement effect of layered double hydroxide on intercalated pyromellitic acidic anions and highly selective uranium extraction from simulated seawater

The oxygen-rich pyromellitic acidic anions (PMA4-) have been intercalated into MgAl-layered double hydroxide to fabricate the MgAl-PMA-LDH (abbr. PMA-LDH) composite, exhibiting excellent adsorption performance toward uranium (U(VI)). Benefiting from the...

Structural Insight into Complexation Ability and Coordination of Uranyl Nitrate by 1,10-Phenanthroline-2,9-diamides

Reprocessing of spent nuclear fuel (SNF) is an important task in a frame of ecology and rational use of natural resources. Uranium, as the main component of SNF (>95%), can be recovered for further use as fresh nuclear fuel. To minimize an amount of solid radioactive waste generated during SNF reprocessing, new extractants are under investigation. Diamides of 1,10-phenanthroline-2,9-dicarboxylic acid are perspective tetradentate N-donor ligands that form strong complexes with f-elements, which are soluble in polar organic solvents. As an example of three ligands of this class, we conducted a comparative study and showed how the substituent in the amide functional group affects the extraction ability toward uranyl nitrate from nitric acid media. We have performed a careful study (NMR, FT-IR, XRD, RMC-EXAFS) of the structures of synthesized complexes of new ligands with uranyl nitrate and used quantum mechanical calculations to explain the discovered regularities through.

Ultrasensitive detection of UO2 2+ based on dopamine-functionalized MoOx quantum dots

Uranium is an important nuclear fuel and the risk of human exposure to uranium increases as increasing amounts of uranium-containing waste enter the environment due to the rapid growth of nuclear power. Therefore, rapid, sensitive, and portable uranium detection is a promising approach to effectively control and monitor uranium contamination. To achieve this goal, abundant oxygen- and nitrogen-containing groups were introduced to molybdenum oxide quantum dot (MoO_x QDs) surfaces with dopamine (DA) modification. Due to the excellent coordination ability of oxygen- and nitrogen-containing groups with uranium, the obtained DA-functionalized MoO_x QDs (DA-MoOx QDs) showed a strong binding affinity for uranium and sensitivity was increased nearly 1000-fold compared with MoO_x QDs alone. The limit of detection was 3.85 nM, which is higher than most of the reported nanomaterials. Moreover, the DA-MoOx QD-based method showed high selectivity and uranium could be clearly detected under masking with ethylenediaminetetraacetic acid even when the concentration of other metal ions was 100-fold higher than that of uranium, showing a very promising method for uranium contamination control and monitoring.

Amidoximated wooden solar evaporator for high-efficiency nuclear wastewater treatment

The efficient removal of uranium (VI) (UO₂²⁺) is of great significance to the ecological environment. However, there is still a lack of efficient adsorption materials to remove UO₂²⁺ in wastewater economically. Because natural basswood has high porosity, natural hydrophilicity, and abundant surface functional groups, wood as a support material has a good application prospect in water treatment. In the present work, the amidoxime functional group (AO) is grafted to the hydroxyl group of the wood fiber (AO-wood). A carbon layer is formed on the surface of the basswood by heating, and some Ag nanoparticles with good optothermal effect are added to the wood tunnel (Ag-C-AO-wood). Ag-C-AO-wood is used for efficient wastewater treatment under light conditions. The adsorption kinetic of Ag-C-AO-wood is 4.6 h under one irradiation, which is 7 times faster than AO-wood. It has approached or even surpassed some traditional carbon materials with stirring. This method is expected to break the traditional stirring method. Ag-C-AO-wood can not only remove uranium up to 82% but also have a good removal efficiency (27%) on iodide ions. More importantly, due to basswood characteristics, it is possible to large-scale preparation and explore its potential application value in wastewater.

Positively charged conjugated microporous polymers with antibiofouling activity for ultrafast and highly selective uranium extraction from seawater

Uranium high-efficiency separation from seawater still has some obstacles such as slow sorption rate, poor selectivity and biofouling. Herein, we report a strategy for ultrafast and highly selective uranium extraction from seawater by positively charged conjugated microporous polymers (CMPs). The polymers are synthesized by Sonogashira-Hagihara cross-coupling reaction of 1,3-dibromo-5,5-dimethylhydantoin and 1,3,5-triethynylbenzene, and then modified with oxime and carboxyl via click reaction. The CMPs show an ultrafast sorption (0.46 mg g^-1 day^-1) for uranium, and possess an outstanding selectivity with a high sorption capacity ratio of U/V (8.4) in real seawater. The study of adsorption process and mechanism indicate that the CMPs skeleton exhibits high affinity for uranium and can accelerate the sorption, and uranium(VI) is adsorbed on the materials by the interaction of oxime/carboxyl ligands and hydantoin. Moreover, the material can be simply loaded onto the filter membrane, and shows remarkable antibiofouling properties against E. coli and S. aureus and excellent uptake capacity for uranium with low concentration in real seawater. This work may provide a promising approach to design adsorbents with fast adsorption rate, high selectivity and antibacterial activity, and expand the thinking over the development of novel and highly efficient adsorbents for uranium extraction from seawater.

Optimizing nanocarbon shell in zero-valent iron nanoparticles for improved electron utilization in Cr(VI) reduction

A core-shell structured zero-valent iron@carbon (ZVI@C) nanocompoiste was designed to improve the electron utilization of ZVI in the Cr(VI) reduction. The porosity of carbon layer in ZVI@C was optimized for improving the efficiency of electron utilization of ZVI in the Cr(VI) reduction process. The porous structure of carbon layer was controllably synthesized by adjusting the carbon source and the ratio of C/Fe in the precursor. The glucose was suggested as the optimal carbon source, and a high specific surface area (37.067 m²/g) was reached for the prepared ZVI@C when the ratio of C/Fe was controlled at 20. These ZVI@C performed well on Cr(VI) reduction, e.g. a complete reduction of Cr(VI) (2 mg/L) to Cr(III) within 10 min. The removal capacity (800 mg/g) exceeded previously recorded ZVI based adsorbents. The pH and initial Cr(VI) concentration were demonstrated as the key factors for the efficient electron utilization of ZVI. Furthermore, the efficiency of electron utilization of the ZVI increased up to 80% when the concentration of Cr(VI) was 2000 mg/L and the pH was controlled at 3, which was much higher than 8% of the naked ZVI.

Regenerable and stable sp2 carbon-conjugated covalent organic frameworks for selective detection and extraction of uranium

Uranium is a key element in the nuclear industry, but its unintended leakage has caused health and environmental concerns. Here we report a sp2 carbon-conjugated fluorescent covalent organic framework (COF) named TFPT-BTAN-AO with excellent chemical, thermal and radiation stability is synthesized by integrating triazine-based building blocks with amidoxime-substituted linkers. TFPT-BTAN-AO shows an exceptional UO22+ adsorption capacity of 427 mg g-1 attributable to the abundant selective uranium-binding groups on the highly accessible pore walls of open 1D channels. In addition, it has an ultra-fast response time (2 s) and an ultra-low detection limit of 6.7 nM UO22+ suitable for on-site and real-time monitoring of UO22+, allowing not only extraction but also monitoring the quality of the extracted water. This study demonstrates great potential of fluorescent COFs for radionuclide detection and extraction. By rational designing target ligands, this strategy can be extended to the detection and extraction of other contaminants.

Magnetic nanocellulose-magnetite aerogel for easy oil adsorption

HYPOTHESIS

Cellulose aerogels are a new category of high-efficiency adsorbents for treating oil spills and water pollution. However, the hydrophilic properties and recyclability of aerogels after adsorption hamper developments and applications. Combining both hydrophobic and magnetic properties are expected to improve their adsorption capacity and functionality.

EXPERIMENTS

In this study, the effect of oleic acid (OA) and nanomagnetite on the preparation of magnetic nanocellulose aerogels (called as NCA/OA/Fe₃O₄) by a mechanical mixing combined with freeze-drying method have been investigated.

FINDINGS

It has been found that the optimal condition for fabricating this NCA/OA/Fe₃O₄ aerogel is 0.4 wt% nanocellulose, 3 mg mL^-1 OA and 0.5 wt% Fe₃O₄ in the aqueous solution. This aerogel has a very low density of 9.2 mg cm^-3 and demonstrates a high adsorption capacity of 68.06 g g^-1 for cyclohexane. In addition, this aerogel adsorbent demonstrates an excellent magnetic responsivity and can be easily recycled by a permanent magnet after adsorption. As a consequence, this hydrophobic magnetic NCA/OA/Fe₃O₄ aerogel is promising not only for easy oil and organic solvent adsorption but also potentially for other magnetic related applications.