Xenon Recovery by DD3R Zeolite Membranes: Application in Anaesthetics

High-Silica CHA Zeolite Membrane with Ultra-High Selectivity and Irradiation Stability for Krypton/Xenon Separation

Capture and storage of the long‐lived ⁸⁵Kr is an efficient approach to mitigate the emission of volatile radionuclides from the spent nuclear fuel reprocessing facilities. However, it is challenging to separate krypton (Kr) from xenon (Xe) because of the chemical inertness and similar physical properties. Herein we prepared high‐silica CHA zeolite membranes with ultra‐high selectivity and irradiation stability for Kr/Xe separation. The suitable aperture size and rigid framework endures the membrane a strong size‐exclusion effect. The ultrahigh selectivity of 51–152 together with the Kr permeance of 0.7–1.3×10⁻⁸ mol m⁻² s⁻¹ Pa⁻¹ of high‐silica CHA zeolite membranes far surpass the state‐of‐the‐art polymeric membranes. The membrane is among the most stable polycrystalline membranes for separation of humid Kr/Xe mixtures. Together with the excellent irradiation stability, high‐silica CHA zeolite membranes pave the way to separate radioactive Kr from Xe for a notable reduction of the volatile nuclear waste storage volume.

An Extrinsic-Pore-Containing Molecular Sieve Film: A Robust, High-Throughput Membrane Filter

MFI type zeolites with 10-membered-ring pores (ca. 0.55 nm) have the ability to separate p-xylene (ca. 0.58 nm) from its bulkier isomers. Here, we introduced non-zeolitic micropores (ca. 0.6-1.5 nm) and mesopores (ca. 2-7 nm) to a conventional microporous MFI type zeolite membrane, yielding an unprecedented hierarchical membrane structure. The uniform, embedded non-zeolitic pores decreased defect formation considerably and facilitated molecular transport, resulting in high p-xylene perm-selectivity and molar flux. Specifically, compared to a conventional, crack network-containing MFI membranes of similar thickness (ca. 1 μm), the mesoporous MFI membranes showed almost double p-xylene permeance (ca. 1.6±0.4×10^-7  mol m^-2  s^-1  Pa^-1 ) and a high p-/o-xylene separation factor (ca. 53.8±7.3 vs. 3.5±0.5 in the conventional MFI membrane) at 225 °C. The embedded non-zeolitic pores allowed for decreasing the separation performance degradation, which was apparently related to coke formation.

Gel-Modulated Growth of High-Quality Zeolite Membranes

Trade-off between thickness (and thus gas permeance) and quality (and thus selectivity) of zeolite membranes significantly restricts their wide application. It is challenging to maintain the membrane thickness while minimizing nonselective defects in the selective membrane layer. Currently, continuous change of the synthesis gel concentration during membrane synthesis, instead of high gel concentration for membrane "skeleton" growth and low gel concentration for slow crystal growth to merge "skeleton" crystals, usually leads to thick membranes to compensate for the low selectivity. In this work, we report a gel-modulated synthesis approach to engineer the zeolite membrane synthesis. The gel concentration was suddenly reduced by a quenching process in the middle of the membrane synthesis, leading to reduced nuclei formation and crystal growth rate in the following synthesis process. Membrane quality was significantly improved without increasing membrane thickness, leading to a great increase in membrane selectivity but without sacrifice of gas permeance. Moreover, as an example, highly reproducible SAPO-34 membranes were successfully prepared by the gel-modulated growth method. We expect this novel synthesis strategy might be a viable and economic way of growing thin and high-quality zeolite membranes.