Unravelling the Synergy between Oxygen Vacancies and Oxygen Substitution in BiO 2− x for Efficient Molecular‐Oxygen Activation

A surface reconstruction route for increasingly improved photocatalytic H2O2 production using Sr2Bi3Ta2O11Cl

Photocatalytic hydrogen peroxide (H2O2) generation is attractive for the chemical industry and energy production. However, photocatalysts generally deteriorate significantly during use to limit their application. Here we present highly active Sr2Bi3Ta2O11Cl single-crystal nanoplates for conversion of O2 to H2O2 using ambient air with a production rate of ∼3 mmol h-1 g-1 (maximum 17.5% photon conversion). Importantly, Sr2Bi3Ta2O11Cl is not only stable during 30 days of H2O2 production but also gets consistently activated to increase the H2O2 yield by >244%, unlike any other catalyst for H2O2 production. Multi-pronged characterization confirms that the synergistic increase in activity originates from in situ surface reconstruction by oxygen-deficient vacancy associate formation that improves (i) surface oxygen adsorption, (ii) sunlight harvesting, and (iii) charge-transfer from the low-valent metal atoms surrounding oxygen vacancies to reactants. The study establishes the prospects of rational defect engineering for realizing non-degrading photocatalysts for realistic H2O2 production.

Photocatalytic O2 activation by metal-free carbon nitride nanotube for rapid reactive species generation and organic contaminants degradation

Advanced oxidation processes (AOPs) using oxygen (O₂) as an oxidant represent a low-cost and sustainable wastewater treatment process. Herein, a metal-free nanotubular carbon nitride photocatalyst (CN NT) was prepared to activate O₂ to degrade organic contaminants. The nanotube structure allowed for sufficient O₂ adsorption, while the optical and photoelectrochemical properties enabled photogenerated charge to be efficiently transferred to the adsorbed O₂ to trigger the activation process. The developed CN NT/Vis-O₂ system based on O₂ aeration degraded various organic contaminants and mineralized 40.7% of chloroquine phosphate within 100 min. In addition, the toxicity and environmental risk of treated contaminants were reduced. Mechanistic studies suggested that the enhanced O₂ adsorption capacity and fast charge transfer behavior on CN NT surface led to reactive·O₂^-, ¹O₂ and h⁺ generation, each of which played a distinct role in contaminants degradation. Importantly, the proposed process could overcome the interference from water matrices and outdoor sunlight, and the energy and chemical reagent savings reduced the operating cost to about 1.63 US$·m^-3. Altogether, this work provides insights into the potential application of metal-free photocatalysts and green O₂ activation for wastewater treatment.

Enhanced Interfacial Electron Transfer by Asymmetric Cu-Ov -In Sites on In2 O3 for Efficient Peroxymonosulfate Activation

Enhancing the peroxymonosulfate (PMS) activation efficiency to generate more radicals is vital to promote the Fenton-like reaction activity, however, how to promote the PMS adsorption and accelerate the interfacial electron transfer to boost its activation kinetics remains a great challenge. Herein, we prepared Cu-doped defect-rich In₂ O₃ (Cu-In₂ O₃ /O_v ) catalysts containing asymmetric Cu-O_v -In sites for PMS activation in water purification. The intrinsic catalytic activity is that the side-on adsorption configuration of the O-O bond (Cu-O-O-In) at the Cu-O_v -In sites significantly stretches the O-O bond length. Meanwhile, the Cu-O_v -In sites increase the electron density near the Fermi energy level, promoting more and faster electron transfer to the O-O bond for generating more SO₄ ⋅^- and ⋅OH. The degradation rate constant of tetracycline achieved by Cu-In₂ O₃ /O_v is 31.8 times faster than In₂ O₃ /O_v , and it shows the possibility of membrane reactor for practical wastewater treatment.

Bifunctional 2D/2D g-C3N4/BiO2-x nanosheets heterojunction for bacterial disinfection mechanisms under visible and near-infrared light irradiation

The efficient deployment of visible and near-infrared (NIR) light for photocatalytic disinfection is of great concern a matter. Herein, we report a specific bifunctional 2D/2D g-C₃N₄/BiO_2-x nanosheets heterojunction, prepared through a self-assembly approach. Delightfully, the obtained 2D/2D heterojunctions exhibited satisfactory photocatalytic disinfection performance towards Escherichia coli K-12 (E. coli K-12) under visible light irradiation, which was credited to the Z-scheme interfacial heterojunction facilitating the migration of photogenerated carries. The photoactivity enhancement driven by NIR light illumination was ascribed to the cooperative synergy effect of photothermal effect and "hot electrons", engineering efficient charge transfer. Intriguingly, the carboxyl groups emerged on g-C₃N₄ nanosheets contributed a vital role in establishing the enhanced photocatalytic reaction. Moreover, the disinfection mechanism was systematically described. The cell membrane was destroyed, evidenced by the generation of lipid peroxidation reaction and loss of energy metabolism. Subsequently, the damage of defense enzymes and release of intracellular constituents announced the irreversible death of E. coli K-12. Interestingly enough, considerable microbial community shifts of surface water were observed after visible and NIR light exposure, highlighting the critical feature of disinfection process in shaping microbial communities. The authors believe that this work gives a fresh light on the feasibility of heterostructures-enabled disinfection processes.

Efficient Oxidation of Paracetamol Triggered by Molecular-oxygen Activation at β-cyclodextrin Modified Titanate Nanotube

Titanate nanotube (TNT) was coated with the cyclic oligosaccharides (carboxymethyl-β-cyclodextrin, CM-β-CD) to obtain a photocatalyst (CM-β-CD-TNT) for efficiently activating molecular oxygen and removing the target contaminant. The hydrophobic cavity and the large specific surface area of the photocatalyst provide abundant active sites for activating molecular oxygen. The free radical capture experiment and quenching experiment showed that cyclodextrin could facilitate adsorption and activation of molecular oxygen to produce O2·-. Therefore, compared with the pristine TNT, CM-β-CD-TNT accelerated the oxidation efficiency of paracetamol (APAP) by 3.4 times. Moreover, the ring cleavage reaction induced by CM-β-CD-TNT effectively reduced the acute toxicity of wastewater containing APAP. Furthermore, 100% of bisphenol A (BPA), bisphenol S (BPS), phenol, 2,4-dichlorophen (2,4-DCP), and carbamazepine (CBZ) were degraded by CM-β-CD-TNT after 2.5 h Ultraviolet (UV) light irradiation. This strategy provides a new dimension for the advanced treatment of organic wastewater by organic macrocyclic molecules modified materials.

State-of-the-Art Advancements of Atomically Thin Two-Dimensional Photocatalysts for Energy Conversion

Excessive use of fossil fuels leads to energy shortages and environmental pollution, threatening human health and social development. As a clean, green, and sustainable technology, generation of renewable energy from...

Oxygen-deficient bismuth molybdate nanocatalysts: Synergistic effects in boosting photocatalytic oxidative coupling of benzylamine and mechanistic insight

Herein, bismuth molybdate (Bi₂MoO₆) nanocatalysts containing oxygen vacancies (OVs) are found to considerably promote the photocatalytic performance toward oxidative coupling of benzylamine to N-benzylidenebenzylamine under visible light irradiation. The structure-activity relationship for this interesting catalyst is revealed for the first time. The oxygen-deficient Bi₂MoO₆ nanoplatelets (BMO-NPs) are synthesized using ethylene glycol-ethanol solvent mixture as a reaction medium in solvothermal method. A comparison with hydrothermally prepared Bi₂MoO₆ square-like sheets (BMO-SHs) suggests that the nanoplatelets are much smaller in size and contain higher amount of OVs. Benzylamine conversion over the BMO-NPs is ca. 4.0 times higher than that over the BMO-SHs and ca. 3.8 and ca. 34.6 times higher than that over the commercial benchmark TiO₂ P25 and BiVO₄ catalysts, respectively. The BMO-NPs achieve more than 80% product yield within 2 h of irradiation regardless of substituents of benzylamine derivatives. The enhanced activity of BMO-NPs is due to synergistic roles of high surface-to-volume ratio and OVs, providing enlarged active area, extended light absorption range and improved charge separation and transfer efficiency as evidenced from UV-vis DRS, BET surface area, photocurrent response, electrochemical impedance spectroscopy, and time-resolved fluorescence decay measurements. EPR-trapping and radical scavenging experiments indicate O₂^- as a main active species rather than ¹O₂ and a plausible imine formation mechanism via O₂^--assisted charge transfer is proposed accordingly. The work offers an alternative facile preparation method to design efficient semiconductor photocatalysts and for the first time reveals a possible benzylamine coupling mechanism over the oxygen-deficient Bi₂MoO₆ nanocatalyst.

Recent Progress on Microfine Design of Metal-Organic Frameworks: Structure Regulation and Gas Sorption and Separation

Metal-organic frameworks (MOFs) have emerged as an important and unique class of functional crystalline hybrid porous materials in the past two decades. Due to their modular structures and adjustable pore system, such distinctive materials have exhibited remarkable prospects in key applications pertaining to adsorption such as gas storage, gas and liquid separations, and trace impurity removal. Evidently, gaining a better understanding of the structure-property relationship offers great potential for the enhancement of a given associated MOF property either by structural adjustments via isoreticular chemistry or by the design and construction of new MOF structures via the practice of reticular chemistry. Correspondingly, the application of isoreticular chemistry paves the way for the microfine design and structure regulation of presented MOFs. Explicitly, the microfine tuning is mainly based on known MOF platforms, focusing on the modification and/or functionalization of a precise part of the MOF structure or pore system, thus providing an effective approach to produce richer pore systems with enhanced performances from a limited number of MOF platforms. Here, the latest progress in this field is highlighted by emphasizing the differences and connections between various methods. Finally, the challenges together with prospects are also discussed.

Synthesis of a Gold-Metal Oxide Core-Satellite Nanostructure for In Situ SERS Study of CuO-Catalyzed Photooxidation

This work reports on an assembling-calcining method for preparing gold-metal oxide core-satellite nanostructures, which enable surface-enhanced Raman spectroscopic detection of chemical reactions on metal oxide nanoparticles. By using the nanostructure, we study the photooxidation of Si-H catalyzed by CuO nanoparticles. As evidenced by the in situ spectroscopic results, oxygen vacancies of CuO are found to be very active sites for oxygen activation, and hydroxide radicals (*OH) adsorbed at the catalytic sites are likely to be the reactive intermediates that trigger the conversion from silanes into the corresponding silanols. According to our finding, oxygen vacancy-rich CuO catalysts are confirmed to be of both high activity and selectivity in photooxidation of various silanes.