IDM‐1: A Zeolite with Intersecting Medium and Extra‐Large Pores Built as an Expansion of Zeolite MFI

Al distribution and structural stability of H-BEA zeolites at different Si/Al ratios and temperatures: a first-principles study

Beta zeolites have been widely used in acid-catalyzed reactions because of their excellent properties. An in-depth study of the position, quantity, and distribution of beta zeolites substituted by Al is significant to understand the catalytic performance of the active site of zeolite catalysts. The distribution of Al in H-BEA and the structure of silanol nests in dealuminated BEA at different Si/Al ratios and synthesis temperatures were studied by the DFT method. T1, T2, T7, and T9 sites were chosen to be simulated. The synthesis temperature can change the distribution of Al and the proportion of T sites at different Si/Al ratios. The proportion of T7 and T9 is more than 70% at different Si/Al ratios of H-BEA and decreases with the synthesis temperature. T1 and T2 sites begin to appear when Si/Al < 20 and the proportion of T1 and T2 sites is less than 20%. When Si/Al < 8, the substitution energy of the AlSiAl structure, which has Si(2Al, 2Si) species, is obviously lower than that of the normal structure, which indicates that the Al-O-Si-O-Al species will appear in H-BEA. The Al(T7)Si(T5)Al(T9)Si(T5)Al(T7) and Al(T1)Si(T1)Al(T9) groups can not only stabilize H-BEA but also play an essential role in the formation of Si(2Al, 2Si) species. For dealuminated BEA zeolites, the silanol nest forms four hydrogen bonds through four silanols. The orientation of silanol groups in the silanol nest formed after dealumination at different T sites is different. The T7 and T9 sites in H-BEA are more likely to undergo dealumination. By contrast, the dealumination of the T1 and T2 sites is a challenge.

Optimized Sieving Effect for Ethanol/Water Separation by Ultramicroporous MOFs

High-purity ethanol is a promising renewable energy resource, however separating ethanol from trace amount of water is extremely challenging. Herein, two ultramicroporous MOFs (UTSA-280 and Co-squarate) were used as adsorbents. A prominent water adsorption and a negligible ethanol adsorption identify perfect sieving effect on both MOFs. Co-squarate exhibits a surprising water adsorption capacity at low pressure that surpassing the reported MOFs. Single crystal X-ray diffraction and theoretical calculations reveal that such prominent performance of Co-squarate derives from the optimized sieving effect through pore structure adjustment. Co-squarate with larger rhombohedral channel is suitable for zigzag water location, resulting in reinforced guest-guest and guest-framework interactions. Ultrapure ethanol (99.9 %) can be obtained directly by ethanol/water mixed vapor breaking through the columns packed with Co-squarate, contributing to a potential for fuel-grade ethanol purification.

Catalytic pyrolysis of biomass over zeolites for bio-oil and chemical production: A review on their structure, porosity and acidity co-relation

The oxygenated compounds found in bio-oil limit their application as a transportation fuel. Several studies were reported on eliminating the oxygenated components from bio-oil so as to improve its fuel properties. This work is dedicated to studying the shape selectivity, porosity, structure, acidity of zeolites and their effect in bio-oil and chemicals production. The unified pore size, specific structure, controlled Si/Al ratio, unique channels and circular entrances, mesoporosity, and acidity are the utmost discerning parameters for aromatics production and deoxygenation reaction. The conversion of biomass-derived oxygenates to aromatics using zeolite is subjected to the reactants entering the pore, conversion inside the pore, and diffusing out of the products from the zeolite pores. These approaches were considered for an in-depth understanding of zeolite properties, which will enhance the fundamental understanding of pyrolysis.

On the completeness of three-dimensional electron diffraction data for structural analysis of metal-organic frameworks

Three-dimensional electron diffraction (3DED) has been proven as an effective and accurate method for structure determination of nano-sized crystals. In the past decade, the crystal structures of various new complex metal-organic frameworks (MOFs) have been revealed by 3DED, which has been the key to understand their properties. However, due to the design of transmission electron microscopes (TEMs), one drawback of 3DED experiments is the limited tilt range of goniometers, which often leads to incomplete 3DED data, particularly when the crystal symmetry is low. This drawback can be overcome by high throughput data collection using continuous rotation electron diffraction (cRED), where data from a large number of crystals can be collected and merged. Here, we investigate the effects of improving completeness on structural analysis of MOFs. We use ZIF-EC1, a zeolitic imidazolate framework (ZIF), as an example. ZIF-EC1 crystallizes in a monoclinic system with a plate-like morphology. cRED data of ZIF-EC1 with different completeness and resolution were analyzed. The data completeness increased to 92.0% by merging ten datasets. Although the structures could be solved from individual datasets with a completeness as low as 44.5% and refined to a high precision (better than 0.04 Å), we demonstrate that a high data completeness could improve the structural model, especially on the electrostatic potential map. We further discuss the strategy adopted during data merging. We also show that ZIF-EC1 doped with cobalt can act as an efficient electrocatalyst for oxygen reduction reactions.

Structure–direction towards the new large pore zeolite NUD-3

A subtle structure–direction allows the crystallization of the ordered and fully connected zeolite NUD-3 instead of disordered or interrupted versions.

Three-dimensional electron diffraction for porous crystalline materials: structural determination and beyond

Porous crystalline materials such as zeolites, metal-organic frameworks (MOFs) and covalent organic frameworks (COFs) have attracted great interest due to their well-defined pore structures in molecular dimensions. Knowing the atomic structures of porous materials is crucial for understanding their properties and exploring their applications. Many porous materials are synthesized as polycrystalline powders, which are too small for structure determination by X-ray diffraction. Three-dimensional electron diffraction (3DED) has been developed for studying such materials. In this Minireview, we summarize the recent developments of 3DED methods and demonstrate how 3DED revolutionized structural analysis of zeolites, MOFs, and COFs. Zeolites and MOFs whose structures remained unknown for decades could be solved. New approaches for design and targeted synthesis of novel zeolites could be developed. Moreover, we discuss the advances of structural analysis by 3DED in revealing the unique structural features and properties, such as heteroatom distributions, mixed-metal frameworks, structural flexibility, guest-host interactions, and structure transformation.