Hydrochromic CsPbBr 3 Nanocrystals for Anti‐Counterfeiting

Fluorescent, multifunctional anti-counterfeiting, fast response electrophoretic display based on TiO2/CsPbBr3 composite particles

Traditional optical anti-counterfeiting (AC) is achieved by static printed images, which makes them susceptible to lower levels of security and easier replication. Therefore, it is essential to develop AC device with dynamic modulation for higher security. Electrophoretic display (EPD) has the advantages of low power consumption, high ambient contrast ratio, and capability of showing dynamic images which is suitable for dynamic AC applications. Herein, we prepared a dynamical AC device based on a fluorescent EPD, and achieving the image switch between black, white, and green fluorescence states under the dual-mode driving (electronic field and UV light). We loaded perovskite quantum dots (CsPbBr3) onto the TiO2 particles and further prepared fluorescent electrophoretic particles TiO2/CsPbBr3-3-PLMA (TiO/CPB-3) by grafting and polymerizing method. In addition, we fabricated the AC devices based on the fluorescent EPD, which exhibits the multifunctional AC, where the fluorescent EPD has a fast response time of 350 ms, a high contrast ratio of 17, and bright green fluorescence. This prototype demonstrates a new way for future dynamic AC and identification.

Photoluminescence Enhancement in Silica-Confined Ligand-Free Perovskite Nanocrystals by Suppression of Silanol-Induced Traps and Phase Impurities

The detriments of intrinsic silanol groups in mesoporous silica to the photoluminescence (PL) of lead halide perovskite nanocrystals (LHP NCs) confined in the template have never been determined and clearly elucidated. Here, we disclose that silanol-induced Cs+ and Br- deficiencies prompt the generation of traps and CsPb2Br5 impurities. The temperature-dependent PL spectra verify the higher energetic barrier of trap states in CsPbBr3 NCs confined in silanol-rich mesoporous silica. Femtosecond transient absorption spectra reveal the trapped state mediates a broadband photoinduced absorption and long-lived decay pathway of CsPbBr3 NCs in silanol-rich templates. A remarkable improvement (up to 160-fold) in PL quantum yields is realized by simple silanol elimination. This work demonstrates the detrimental effects of silanol sites on the PL properties of LHP NCs impregnated in mesoporous silica and provides a new perspective for the ligand-free synthesis of high-quality LHP NCs in mesoporous templates by facile impregnation for practical applications.

Hydrochromic film for dynamic information storage using cellulose nanofibers and silica nanoparticles

A hydrochromic composite film was fabricated by incorporating silica nanoparticles (SiNPs) with cellulose nanofibers (CNFs). The CNF/SiNP composite film underwent a reversible change in transparency in response to external moisture variation. The CNFs improved the dimensional stability of the CNF/SiNP composite film and induced morphological differences in SiNP agglomerates, which control the water vapor condensation in a porous film. The condensed water in the pores reduced the difference in refractive index over the CNF/SiNP film, enhancing its transparency. The selective transparency of the composite film was challenged by printing CNF/SiNP inks at different composition ratios. The differing susceptibility of the printed patterns to moisture provided selective transparency at specific patterns, which can store dynamic information such as QR or numerical codes by simple water vapor adsorption and desorption.

Water-Triggered Chemical Transformation of Perovskite Nanocrystals

Recently emerged lead-halide perovskite nanocrystals (PNCs) are promising optoelectronic material due to their easy solution processability, wide range of color tunability, as well as very high photoluminescence quantum yield. Despite their significant success in lab-scale optoelectronic applications, the long-term stability becomes the main issue, hindering them towards commercialization. The highly ionic nature of such lead-halide structure makes them extremely unstable in water and air. But a very few groups have taken the advantage of such nature of the crystal structure for water-triggered chemical transformation towards shape, composition, and morphology controlled stable and bright PNCs, which are otherwise difficult to obtain by typical direct approach. Furthermore, using polymer as an encapsulating layer for the PNCs, water-soluble stable PNCs have been prepared. In this review, the recent progress on the water-hexane interface chemistry towards chemical transformation to produce several PNCs is described. Such method not only ensure to yield several shape-controlled perovskites nanocrystals, but also formation of perovskites in aqueous phase that show promising application towards bio-imaging.

In situ passivation of Pb0 traps by fluoride acid-based ionic liquids enables enhanced emission and stability of CsPbBr3 nanocrystals for efficient white light-emitting diodes

A great hurdle restricting the optoelectronic applications of cesium lead halide perovskite (CsPbX₃) nanocrystals (NCs) is due to the uncoordinated lead atoms (Pb⁰) on the surface, where most attempts to address the challenges in the literature depend on complicated post-treatment processes. Here we report a simple in situ surface engineering strategy to obtain highly fluorescent and stable perovskite NCs, wherein the introduction of the multifunctional additive 1-butyl-3-methyl-imidazolium tetrafluoroborate ([Bmim]BF₄) can significantly eliminate the Pb⁰ traps. The photoluminescence quantum yield (PLQY) of the as-synthesized NCs was improved from 63.82% to 94.63% due to the good passivation of the surface defects. We also confirm the universality of this in situ passivation pathway to remove Pb⁰ deep traps by using fluoride acid-based ionic liquids (ILs). Due to the high hydrophobicity of the cations of ILs, the as-prepared CsPbBr₃ NCs exhibit robust water resistance stability, maintaining 67.5% of the initial photoluminescence (PL) intensity after immersion in water for 21 days. A white light emitting diode (LED), assembled by mixing the as-synthesized CsPbBr₃ NCs and red K₂SiF₆:Mn⁴⁺ phosphors onto a blue chip, exhibits high luminous efficiency (100.07 lm W^-1) and wide color gamut (140.64% of the National Television System Committee (NTSC) standard). This work provides a promising and facile technique to eliminate the Pb⁰ traps and improve the optical performance and stability of halide perovskite NCs, facilitating their applications in optoelectronic fields.

Core-Shell Structured Upconversion/Lead-Free Perovskite Nanoparticles for Anticounterfeiting Applications

In view of their excellent luminescence properties, nanocrystalline metal halide perovskites have diverse optoelectronic applications, including those related to anticounterfeiting. However, high-quality optical anticounterfeiting typically requires multiple encryptions relying on several optical modes to ensure information security. Herein, an efficient anticounterfeiting strategy based on dual optical encryption is realized by combining up- and downconversion luminescence in a nanocomposite with NaYF₄  : Er³⁺ ,Yb³⁺ as core and a CsMnCl₃ as shell. The emission color of this nanocomposite depends on the penetration depth of incident radiation and can be changed by varying the excitation source (980 nm laser or UV light) to produce different luminescent patterns. This feature allows one to effectively improve the anticounterfeiting index and fabricate professional anticounterfeiting materials.

Crystalline-Phase-Recognition-Induced Domino Phase Transition and Luminescence Switching for Advanced Information Encryption

Herein, a new mechanism, namely, crystalline phase recognition (CPR), is proposed for the single-crystal-to-single-crystal (SCSC) transition of metal halides. Chiral β-[Bmmim]₂ SbCl₅ (Bmmim=1-butyl-2,3-methylimidazolium) can recognize achiral α-[Bmmim]₂ SbCl₅ on the basis of a key-lock feature through intercontact of their single crystals, resulting in a domino phase transition (DPT). The concomitant photoluminescence (PL) switching enables observation of the DPT in situ. The liquid eutectic interface, stress-strain transfer, and feasible thermodynamics are key issues for the CPR. DFT calculations and PL measurements revealed that the optical absorption and emission of the isomers mainly originate from [SbCl₅ ]^2- anions. The structural effects (e.g., supramolecular interactions and [SbCl₅ ]^2- distortion) on the optical emission are clarified. As a novel type of stimuli response, the CPR-induced DPT and luminescence switching exhibit potential for application in advanced time-resolved information encryption.