Self‐Assembly of Photoresponsive Molecular Amphiphiles in Aqueous Media

Sustainable Harnessing of Waste Polycarbonate for Synthesizing Activated Furans to Generate Stenhouse Adducts on Polymer Surface

Plastics are versatile materials, offering lightweight, durable, and affordable solutions across various industries. However, their non-degradable nature poses challenges by end of their life. This study presented an innovative carbonyl extraction method to utilize waste poly(bisphenol A carbonate) (PC) as reaction precursor to synthesis of activated furan as precursor for photoswitchable Stenhouse adducts. This innovative chemical strategy not only generated N,N'-functionalized barbiturates but also provided an eco-friendly and cost-effective alternative to traditional synthesis methods. The method presented hereby not only promotes sustainability by repurposing waste polycarbonate as carbonyl equivalent under green conditions but also yielded reusable bisphenol A (BPA). Furthermore, the derived activated furans exhibited their functionality by forming colored donor-acceptor Stenhouse adducts (DASAs) on aminated polymer surfaces. This work demonstrated a transition from a linear plastics economy toward a circular one, highlighting the potential of plastic waste as a resource for creating materials with improved properties.

Time-Resolved Structural Analysis of Fast-Photoresponsive Surfactant Micelles by Stroboscopic Small-Angle Neutron Scattering

Photoresponsive materials are garnering attention because of their applications toward building a sustainable society. A recently developed fast-photoresponsive amphiphilic lophine dimer (3TEG-LPD) responds rapidly to light, making it a promising candidate for drug-delivery systems. In this study, the mechanism of structural changes induced by ultraviolet (UV) irradiation in 3TEG-LPD micelles in an aqueous solution was investigated via an in situ time-resolved small-angle neutron scattering (SANS) technique. Since subsecond resolution was necessary to observe the structural changes in the 3TEG-LPD micelles, stroboscopic SANS analysis was employed to obtain scattering profiles with a time width of 0.5 s. The structural parameters were quantitatively determined by performing a model-fitting analysis of the SANS results. The stroboscopic SANS results showed that upon UV irradiation, the axial ratio and pseudo-aggregation number of the 3TEG-LPD micelles increased by 1.8 and 1.6 times, respectively, whereas the number of water molecules per surfactant molecule decreased. This finding suggested that the change in the shape of the micelles from spherical to ellipsoidal shape was accompanied by dehydration. Under the present UV irradiation conditions, this structural change of the micelle occurred rapidly during the first 30 s after the start of UV irradiation. Each structural parameter recovered exponentially and reversibly during the recovery process after the cessation of UV irradiation. The changes in these parameters were analyzed in terms of kinetics by comparing them with the changes in the molecular structure. We found that the change of the micelles proceeds approximately twice as fast as the association of the molecule. Furthermore, from the perspective of the critical packing parameter consideration, the SANS analysis revealed that the UV-induced changes in 3TEG-LPD micelles are dominated by the enthalpy contribution. This finding is expected to be useful for developing new materials for various applications.

Adaptive 2D and Pseudo-2D Systems: Molecular, Polymeric, and Colloidal Building Blocks for Tailored Complexity

Two-dimensional and pseudo-2D systems come in various forms. Membranes separating protocells from the environment were necessary for life to occur. Later, compartmentalization allowed for the development of more complex cellular structures. Nowadays, 2D materials (e.g., graphene, molybdenum disulfide) are revolutionizing the smart materials industry. Surface engineering allows for novel functionalities, as only a limited number of bulk materials have the desired surface properties. This is realized via physical treatment (e.g., plasma treatment, rubbing), chemical modifications, thin film deposition (using both chemical and physical methods), doping and formulation of composites, or coating. However, artificial systems are usually static. Nature creates dynamic and responsive structures, which facilitates the formation of complex systems. The challenge of nanotechnology, physical chemistry, and materials science is to develop artificial adaptive systems. Dynamic 2D and pseudo-2D designs are needed for future developments of life-like materials and networked chemical systems in which the sequences of the stimuli would control the consecutive stages of the given process. This is crucial to achieving versatility, improved performance, energy efficiency, and sustainability. Here, we review the advancements in studies on adaptive, responsive, dynamic, and out-of-equilibrium 2D and pseudo-2D systems composed of molecules, polymers, and nano/microparticles.

Charge Density Overcomes Steric Hindrance of Ferrocene Surfactant in Switchable Oil-in-Dispersion Emulsions

A ferrocene surfactant can be switched between single and double head form (FcN⁺ C₁₂ /Fc⁺ N⁺ C₁₂ ) triggered by redox reaction. FcN⁺ C₁₂ can neither stabilize an O/W emulsion alone nor an oil-in-dispersion emulsion in combination with alumina nanoparticles due to the steric hindrance of the ferrocene group. However, such steric hindrance can be overcome by increasing the charge density in Fc⁺ N⁺ C₁₂ , so that oil-in-dispersion emulsions can be co-stabilized by Fc⁺ N⁺ C₁₂ and alumina nanoparticles at very low concentrations (1×10^-7  M (≈50 ppb) and 0.001 wt %, respectively). Not only can reversible formation/destabilization of oil-in-dispersion emulsions be achieved by redox reaction, but also reversible transformation between oil-in-dispersion emulsions and Pickering emulsions can be obtained through reversing the charge of alumina particles by adjusting the pH. The results provide a new protocol for the design of surfactants for stabilization of smart oil-in-dispersion emulsions.

Visible-Light-Switchable Tellurium-Based Chalcogen Bonding: Photocontrolled Anion Binding and Anion Abstraction Catalysis

Exploring new noncovalent bonding motifs with reversibly tunable binding affinity is of fundamental importance in manipulating the properties and functions of supramolecular self-assembly systems and materials. Herein, for the first time, we demonstrate a unique visible-light-switchable telluro-triazole/triazolium-based chalcogen bonding (ChB) system in which the Te moieties are connected by azobenzene cores. The binding strengths between these azo-derived ChB receptors and the halide anions (Cl^- , Br^- ) could be reversibly regulated upon irradiation by visible light of different wavelengths. The cis-bidentate ChB receptors exhibit enhanced halide anion binding ability compared to the trans-monodentate receptors. In particular, the telluro-triazolium-based ChB receptor can achieve both high and significantly photoswitchable binding affinities for halide anions, which enable it to serve as an efficient photocontrolled organocatalyst for ChB-assisted halide abstraction in a Friedel-Crafts alkylation benchmark reaction.

Spiropyran/Merocyanine Amphiphile in Various Solvents: A Joint Experimental–Theoretical Approach to Photophysical Properties and Self-Assembly

This joint experimental-theoretical work focuses on molecular and photophysical properties of the spiropyran-containing amphiphilic molecule in organic and aqueous solutions. Being dissolved in tested organic solvents, the system demonstrates positive photochromism, i.e., upon UV stimulus the colorless spiropyran form is transformed into colorful merocyanine isomer. However, the aqueous solution of the amphiphile possesses a negative photochromism: the orange-red merocyanine form becomes thermodynamically more stable in water, and both UV and vis stimuli lead to the partial or complete photobleaching of the solution. The explanation of this phenomenon is given on the basis of density functional theory calculations and classical modeling including thermodynamic integration. The simulations reveal that stabilization of merocyanine in water proceeds with the energy of ca. 70 kJ mol−1, and that the Helmholtz free energy of hydration of merocyanine form is 100 kJ mol−1 lower as compared to the behavior of SP isomer in water. The explanation of such a difference lies in the molecular properties of the merocyanine: after ring-opening reaction this molecule transforms into a zwitterionic form, as evidenced by the electrostatic potential plotted around the opened form. The presence of three charged groups on the periphery of a flat conjugated backbone stimulates the self-assembly of merocyanine molecules in water, ending up with the formation of elongated associates with stack-like building blocks, as shown in molecular dynamics simulations of the aqueous solution with the concentration above critical micelle concentration. Our quantitative evaluation of the hydrophilicity switching in spiropyran/merocyanine containing surfactants may prompt the search for new systems, including colloidal and polymeric ones, aiming at remote tuning of their morphology, which could give new promising shapes and patterns for the needs of modern nanotechnology.

Visible‐Light‐Responsive Self‐Assembled Complexes: Improved Photoswitching Properties by Metal Ion Coordination**

A photoswitchable ligand based on azobenzene is self‐assembled with palladium(II) ions to form a [Pd₂(E‐L)₄]⁴⁺ cage. Irradiation with 470 nm light results in the near‐quantitative switching to a monomeric species [Pd(Z‐L)₂]²⁺, which can be reversed by irradiation with 405 nm light, or heat. The photoswitching selectivity towards the metastable isomer is significantly improved upon self‐assembly, and the thermal half‐life is extended from 40 days to 850 days, a promising approach for tuning photoswitching properties.

Unusual Self-Assembly of Amphiphilic Block Copolymer Blends Induced by Control of Hydrophobic Interaction

Block copolymer blend systems have been of great interest for a wide range of potential applications, such as nanobuilding blocks or guidance materials, because they can provide a rich phase behavior according to external conditions. However, a new and unique phase behavior of block copolymers, which can give us their more extended potential applications, has not yet been reported. Herein, we report the unusual self-assembly of two different types of Pluronic P65 and PE6200 triblock copolymer blends dependent on temperature and PE6200 concentration, which is unique for the block copolymer blends in aqueous solution. As the temperature and concentration of PE6200 (as an additive) increased, the Pluronic P65/PE6200 copolymer blends sequentially self-assembled into an isotropic micellar-hexagonal-isotropic micellar or isotropic micellar-hexagonal-isotropic micellar-lamellar phase, which is a discontinuous ordered phase (called a closed looplike phase transition), and their phase transition temperature could be controlled. To the best of our knowledge, this is the first report of a closed looplike phase transition of Pluronic block copolymer blends in aqueous solution, which can be easily applied to nanosized templates for temperature-selective highly ordered structures and optical devices such as optoelectronics or optical sensors.

Structure-Performance Relationships for Tail Substituted Zwitterionic Betaine-Azobenzene Surfactants

Azobenzene-containing surfactants (azo-surfactants) have garnered significant attention for their use in generating photoresponsive foams, interfaces, and colloidal systems. The photoresponsive behavior of azo-surfactants is driven by the conformational and electronic changes that occur when the azobenzene chromophore undergoes light-induced trans ⇌ cis isomerization. Effective design of surfactants and targeting of their properties requires a robust understanding of how the azobenzene functionality interacts with surfactant structure and influences overall surfactant behavior. Herein, a library of tail substituted azo-surfactants were synthesized and studied to better understand how surfactant structure can be tailored to exploit the azobenzene photoswitch. This work shows that tail group structure (length and branching) has a profound influence on the critical micelle concentration of azo-surfactants and their properties once adsorbed to an air-water interface. Neutron scattering studies revealed the unique role that intermolecular π-π azobenzene interactions have on the self-assembly of azo-surfactants, and how the influence of these interactions can be tuned using tail group structure to target specific aqueous aggregate morphologies.

Alkylgold(III) Complexes Undergo Unprecedented Photo-Induced β-Hydride Elimination and Reduction for Targeted Cancer Therapy

Spatiotemporally controllable activation of prodrugs within tumors is highly desirable for cancer therapy to minimize toxic side effects. Herein we report that stable alkylgold(III) complexes can undergo unprecedented photo-induced β-hydride elimination, releasing alkyl ligands and forming gold(III)-hydride intermediates that could be quickly converted into bioactive [Au^III -S] adducts; meanwhile, the remaining alkylgold(III) complexes can photo-catalytically reduce [Au^III -S] into more bioactive Au^I species. Such photo-reactivities make it possible to functionalize gold complexes on the auxiliary alkyl ligands without attenuating the metal-biomacromolecule interactions. As a result, the gold(III) complexes containing glucose-functionalized alkyl ligands displayed efficient and tumor-selective uptake; notably, after one- or two-photon activation, the complexes exhibited high thioredoxin reductase (TrxR) inhibition, potent cytotoxicity, and strong antiangiogenesis and antitumor activities in vivo.