Dinuclear enantiopure Ln3+ complexes with (S-) and (R-) 2-phenylbutyrate ligands. Luminescence, CPL and magnetic properties

The reaction of Ln(NO3)2·6H2O (Ln = Nd, Sm, Eu, Tb, Dy, Tm and Yb) with the respective enantiopure (R)-(-)-2-phenylbutyric or (S)-(+)-2-phenylbutyric acid (R/S-2-HPhBut) and 4,7-diphenyl-1,10-phenanthroline (Bphen) allows the isolation of chiral dinuclear compounds of the formula [Ln2(μ-R/S-2-PhBut)4(R/S-2PhBut)2(Bphen)2] where Ln = Nd3+ (R/S-Nd-a), Sm3+ (R/S-Sm-a), Eu3+ (R/S-Eu-a), Tb3+ (R/S-Tb-a and R/S-Tb-b), Dy3+ (R/S-Dy-a and R/S-Dy-b), Tm3+ (R/S-Tm-b) and Yb3+ (R/S-Yb-b). Single crystal X-ray diffraction was performed for compounds S-Eu-a and S-Tm-b. Powder crystal X-ray diffraction was performed for all complexes. From the crystallographic data two different structural motifs were found which are referred to as structure type a and structure type b. In structure type a, the Ln3+ atoms are bridged through four R or S-2-PhBut ligands with two different kinds of coordination modes whereas in structure type b the two Ln3+ atoms are bridged through four R or S-2-PhBut ligands showing only one kind of coordination mode. For those lanthanide ions exhibiting both structure types, Tb3+ and Dy3+, a difference in the luminescence and magnetism behavior is observed. All compounds (except R/S-Tm-b) exhibit sensitized luminescence, notably the Eu3+ and Tb3+ analogues. Circular Dichroism (CD) and Circular Polarized Luminescence (CPL) in the solid state and in 1 mM dichloromethane (DCM) solutions are reported, leading to improved chiroptical properties for the DCM solutions. The asymmetry factor (glum) in 1 mM DCM is ±0.02 (+ for R-Eu-a) for the magnetically allowed transition 5D0 → 7F1 and ±0.03 (+ for R-Tb-a and R-Tb-b) for the 5D4 → 7F5 transition. Magnetic properties of all compounds were studied and the Dy3+ compound with the structural motif b (R-Dy-b) shows Single Molecular Magnet (SMM) behavior under a 0 T magnetic field. However, R-Dy-a is a field-induced SMM.

Twisting of Porphyrin by Assembly in a Metal-Organic Framework yielding Chiral Photoconducting Films for Circularly-Polarized-Light Detection

While materials based on organic molecules usually have either superior optoelectronic or superior chiral properties, the combination of both is scarce. Here, a crystalline chiroptical film based on porphyrin with homochiral side groups is presented. While the dissolved molecule has a planar, thus, achiral porphyrin core, upon assembly in a metal-organic framework (MOF) film, the porphyrin core is twisted and chiral. The close packing and the crystalline order of the porphyrin cores in the MOF film also results in excellent optoelectronic properties. By exciting the Soret band of porphyrin, efficient photoconduction with a high On-Off-ratio is realized. More important, handedness-dependent circularly-polarized-light photoconduction with a dissymmetry factor g of 4.3×10^-4 is obtained. We foresee the combination of such assembly-induced chirality with the rich porphyrin chemistry will enable a plethora of organic materials with exceptional chiral and optoelectronic properties.

Mechano-Stimulus and Environment-Dependent Circularly Polarized TADF in Chiral Copper(I) Complexes and Their Application in OLEDs

Molecular emitters that combine circularly polarized luminescence (CPL) and high radiative rate constants of the triplet exciton decay are highly attractive for electroluminescent devices (OLEDs) or next-generation photonic applications, such as spintronics, quantum computing, cryptography, or sensors. However, the design of such emitters is a major challenge because the criteria for enhancing these two properties are mutually exclusive. In this contribution, we show that enantiomerically pure {Cu(Cbz^R)[(S/R)-BINAP]} [R = H (1), 3,6-tBu (2)] are efficient thermally activated delayed fluorescence (TADF) emitters with high radiative rate constants of k_TADF up to 3.1 × 10⁵ s^-1 from ^1/3LLCT states according to our temperature-dependent time-resolved luminescence studies. The efficiency of the TADF process and emission wavelengths are highly sensitive to environmental hydrogen bonding of the ligands, which can be disrupted by grinding of the crystalline materials. The origin of this pronounced mechano-stimulus photophysical behavior is a thermal equilibrium between the ^1/3LLCT states and a ³LC state of the BINAP ligand, which depends on the relative energetic order of the excited states and is prone to inter-ligand C-H···π interactions. The copper(I) complexes are also efficient CPL emitters displaying exceptional dissymmetry values g_lum of up to ±0.6 × 10^-2 in THF solution and ±2.1 × 10^-2 in the solid state. Importantly for application in electroluminescence devices, the C-H···π interactions can also be disrupted by employing sterically bulky matrices. Accordingly, we have investigated various matrix materials for successful implementation of the chiral copper(I) TADF emitters in proof-of-concept CP-OLEDs.

Highly Fluorescent Bipyrrole-Based Tetra-BF2 Flag-Hinge Chromophores: Achieving Multicolor and Circularly Polarized Luminescence

This study reports the facile syntheses of tetra-boron difluoride (tetra-BF₂ ) complexes, flag-hinge-like molecules that exhibit intense green-to-orange luminescence in solution and yellow-to-red emission in the solid states. Single-crystal structure analysis and density functional theory calculations suggested a bent structure of this series of compounds. The complexes also exhibited excellent optical properties, with quantum yields reaching 100 % and a large Stokes shift. These properties were attributed to the altered bending angle of the molecule in the S₁ excited state. As the rotational motion was suppressed around the 2,2'-bipyrrole axis, atropisomers with axial chirality were formed, which are optically resolvable into (R) and (S)-enantiomers through a chiral column. The atropisomers thus function as circularly polarized luminescent (CPL) materials, in which the color (green, green-yellow, and yellow) can be varied by controlling the aggregation state. This rational design of multi-BF₂ complexes can potentially realize novel photofunctional materials.

Ruthenium Complexes Bearing Axially Chiral Bipyridyls: The Mismatched Diastereomer Showed Red Circularly Polarized Phosphorescence

Ruthenium^II complexes bearing three axially chiral bipyridyl ligands were synthesized as a new family of chiral complex dyes, and Δ-(S)- and Λ-(S)-diastereomers were obtained. The X-ray crystal structure analyses, spectroscopy, and DFT calculations suggested that all the bipyridyls maintained chirality in both the ground and excited states, and the Δ-(S)- and Λ-(S)-isomers are the matched (more relaxed) and mismatched (more constrained) pairs, respectively. The mismatched Λ-(S)-isomer exhibited red circularly polarized phosphorescence (CPP) both in solution and in the solid state. The solution state CPP is the most intense of ruthenium complexes, while the solid state CPP is the first example of them. It is supposed that, for the Λ-(S)-isomer, the six cumulative CH/π interactions suppress further distortion in the T₁ state.

A Near-Infrared-II Emissive Chromium(III) Complex

The combination of π-donating amido with π-accepting pyridine coordination units in a tridentate chelate ligand causes a strong nephelauxetic effect in a homoleptic CrIII complex, which shifts its luminescence to the NIR-II spectral range. Previously explored CrIII polypyridine complexes typically emit between 727 and 778 nm (in the red to NIR-I spectral region), and ligand design strategies have so far concentrated on optimizing the ligand field strength. The present work takes a fundamentally different approach and focusses on increasing metal-ligand bond covalence to shift the ruby-like 2 E emission of CrIII to 1067 nm at 77 K.

Stacked Reticular Frame Boosted Circularly Polarized Luminescence of Chiral Covalent Organic Frameworks

Chiral covalent organic frameworks (COFs) with circularly polarized luminescence (CPL) are intriguing as advanced chiroptical materials but have not been reported to date. We constructed chiroptical COF materials with CPL activity through the convenient Knoevenagel condensation of formyl-functionalized axially chiral linkers and C3-symmetric 1,3,5-benzenetriacetonitrile. Remarkably, the as-prepared chiral COFs showed high absorption and luminescent dissymmetric factors up to 0.02 (g_abs ) and 0.04 (g_lum ), respectively. In contrast, the branched chiral polymers from the same starting monomers were CPL silent. Structural and spectral characterization revealed that the reticular frame was indispensable for CPL generation via confined chirality transfer. Moreover, reticular stacking boosted the CPL performance significantly due to the interlayer restriction of frame. This work demonstrates the first example of a CPL-active COF and provides insight into CPL generation through covalent reticular chemistry, which will play a constructive role in the future design of high-performance CPL materials.