Strong support effect induced by MXene for the synthesis of metal sulfides nanosheet arrays with sulfur vacancies towards selective CO2-to-CO photoreduction

Selective CO2-to-CO photoreduction is under intensive research and requires photocatalysts with tuned microstructures to accelerate the reaction kinetics. Here, we report CuInS2 nanosheet arrays with sulfur vacancies (VS) grown on the two-dimensional (2D) support of Ti3C2Tx MXene for CO2-to-CO photoreduction. Our results reveal that the use of Ti3C2Tx induces strong support effect, which causes the hierarchical nanosheet arrays growth of CuInS2 and simultaneously leads to charge transfer from CuInS2 to Ti3C2Tx support, resulting in VS formed in CuInS2. The strong support effect based on Ti3C2Tx is proven to be applicable to prepare a series of different metal indium sulfide arrays with VS. CuInS2 nanosheet arrays with VS supported on Ti3C2Tx benefit the photocatalytic selective reduction of CO2 to CO, manifesting a remarkable over 14.8-fold activity enhancement compared with pure CuInS2. The experimental and computational investigations pinpoint that VS of CuInS2 resulting from the support effect of Ti3C2Tx lowers the barrier of the rate-limiting step of *COOH → *OH + *CO, which is the key to the photoactivity enhancement. This work demonstrates MXene support effects and offers an effective approach to regulate the atomic microstructure of metal sulfides toward enhancing photocatalytic performance.

Precise Modulation of Triple-Phase Boundaries towards a Highly Functional Exsolved Catalyst for Dry Reforming of Methane under a Dilution-Free System

Dry reforming of methane (DRM) has been emerging as a viable solution to achieving carbon neutrality enhanced by the Paris Agreement as it converts the greenhouse gases of CO2 and CH4 into industrially useful syngas. However, there have been limited studies on the DRM catalyst under mild operating conditions with a high dilution gas ratio due to their deactivation from carbon coking and metal sintering. Herein, we apply the triple-phase boundary (TPB) concept to DRM catalyst via exsolution phenomenon that can secure elongated TPB by controlling the Fe-doping ratio in perovskite oxide. Remarkably, the exsolved catalyst with prolongated TPB shows exceptional CO2 and CH4 conversion rates of 95.9 % and 91.6 %, respectively, stable for 1000 hours under a dilution-free system. DFT calculations confirm that the Lewis acid of support and Lewis base of metal at the TPB promote the adsorption of reactants, resulting in lowering the overall CO2 dissociation and CH4 dehydrogenation energy.

Catalytic Upgrading of Biomass-Gasification Mixtures Using Ni-Fe/MgAl2O4 as a Bifunctional Catalyst

Biomass gasification streams typically contain a mixture of CO, H₂, CH₄, and CO₂ as the majority components and frequently require conditioning for downstream processes. Herein, we investigate the catalytic upgrading of surrogate biomass gasifiers through the generation of syngas. Seeking a bifunctional system capable of converting CO₂ and CH₄ to CO, a reverse water gas shift (RWGS) catalyst based on Fe/MgAl₂O₄ was decorated with an increasing content of Ni metal and evaluated for producing syngas using different feedstock compositions. This approach proved efficient for gas upgrading, and the incorporation of adequate Ni content increased the CO content by promoting the RWGS and dry reforming of methane (DRM) reactions. The larger CO productivity attained at high temperatures was intimately associated with the generation of FeNi₃ alloys. Among the catalysts' series, Ni-rich catalysts favored the CO productivity in the presence of CH₄, but important carbon deposition processes were noticed. On the contrary, 2Ni-Fe/MgAl₂O₄ resulted in a competitive and cost-effective system delivering large amounts of CO with almost no coke deposits. Overall, the incorporation of a suitable realistic application for valorization of variable composition of biomass-gasification derived mixtures obtaining a syngas-rich stream thus opens new routes for biosyngas production and upgrading.

Active Exsolved Metal-Oxide Interfaces in Porous Single-Crystalline Ceria Monoliths for Efficient and Durable CH4 /CO2 Reforming

Dry reforming of CH₄ /CO₂ provides an attractive route to convert greenhouse gas into syngas; however, the resistance to sintering and coking of catalyst remains a fundamental challenge at high operation temperatures. Here we create active and durable metal-oxide interfaces in porous single-crystalline (PSC) CeO₂ monoliths with in situ exsolved single-crystalline (SC) Ni particles and show efficient dry reforming of CH₄ /CO₂ at temperatures as low as 450 °C. We show the excellent and durable performance with ≈20 % of CH₄ conversion and ≈30 % of CO₂ conversion even in a continuous operation of 240 hours. The well-defined active metal-oxide interfaces, created by exsolving SC Ni nanoparticles from PSC Ni_x Ce_1-x O₂ to anchor them on PSC CeO₂ scaffolds, prevent nanoparticle sintering and enhance the coking resistance due to the stronger metal-support interactions. Our work would enable an industrially and economically viable path for carbon reclamation, and the technique of creating active and durable metal-oxide interfaces in PSC monoliths could lead to stable catalyst designs for many challenging reactions.