Tailoring the Electronic Metal–Support Interactions in Supported Atomically Dispersed Gold Catalysts for Efficient Fenton‐like Reaction

Lattice-Confined Single-Atom Catalyst: Preparation, Application and Electron Regulation Mechanism

Lattice-confined single-atom catalyst (LC SAC), featuring exceptional activity, intriguing stability and prominent selectivity, has attracted extensive attention in the fields of various reactions (e.g., hydrogen evolution reaction (HER), oxygen evolution reaction (OER), oxygen reduction reaction (ORR), etc.). To design a "smart" LC SAC for catalytic applications, one must systematically comprehend updated advances in the preparation, the application, and especially the peculiar electron regulation mechanism of LC SAC. In this review, the specific preparation methods of LC SAC based on general coordination strategy are updated, and its applications in HER, OER, ORR, N2 reduction reaction (NRR), advanced oxidation processes (AOPs) and so forth are summarized to display outstanding activity, stability and selectivity. Uniquely, the electron regulation mechanisms are first and deeply discussed and can be primarily categorized as electron transfer bridge with monometallic active sites, novel catalytic centers with polymetallic active sites, and positive influence by surrounding environments. In the end, the existing issues and future development directions are put forward with a view to further optimize the performance of LC SAC. This review is expected to contribute to the in-depth understanding and practical application of highly efficient LC SAC.

Heteroatom substitution enhances generation and reactivity of surface-activated peroxydisulfate complexes for catalytic fenton-like reactions

Peroxydisulfate (PDS)-based Fenton-like reactions are promising advanced oxidation processes (AOPs) to degrade recalcitrant organic water pollutants. Current research predominantly focuses on augmenting the generation of reactive species (e.g., surface-activated PDS complexes (PDS*) to improve treatment efficiency, but overlooks the potential benefits of enhancing the reactivity of these species. Here, we enhanced PDS* generation and reactivity by incorporating Zn into CuO catalyst lattice, which resulted in 99% degradation of 4-chlorophenol within only 10 min. Zn increased PDS* generation by nearly doubling PDS adsorption while maintaining similar PDS to PDS* conversion efficiency, and induced higher PDS* reactivity than the common catalyst CuO, as indicated by a 4.1-fold larger slope between adsorbed PDS and open circuit potential of a catalytic electrode. Cu-O-Zn formation upshifts the d-band center of Cu sites and lowers the energy barrier for PDS adsorption and sulfate desorption, resulting in enhanced PDS* generation and reactivity. Overall, this study informs strategies to enhance PDS* reactivity and design highly active catalysts for efficient AOPs.

Improved Electronic Structure from Spin-State Reconstruction of a Heteronuclear Fe-Co Diatomic Pair to Boost the Fenton-like Reaction

Dual-atom catalysts (DACs) are promising candidates for various catalytic reactions, including electrocatalysis, chemical synthesis, and environmental remediation. However, the high-activity origin and mechanism underlying intrinsic activity enhancement remain elusive, especially for the Fenton-like reaction. Herein, we systematically compared the catalytic performance of dual-atom FeCo-N/C with its single-atom counterparts by activating peroxymonosulfate (PMS) for pollutant abatement. The unusual spin-state reconstruction on FeCo-N/C is demonstrated to effectively improve the electronic structure of Fe and Co in the d orbital and enhance the PMS activation efficiency. Accordingly, the dual-atom FeCo-N/C with an intermediate-spin state remarkably boosts the Fenton-like reaction by almost 1 order of magnitude compared with low-spin Co-N/C and high-spin Fe-N/C. Moreover, the established dual-atom-activated PMS system also exhibits excellent stability and robust resistance against harsh conditions. Combined theoretical calculations reveal that unlike unitary Co atom or Fe atom transferring electrons to the PMS molecule, the Fe atom of FeCo-N/C provides extra electrons to the neighboring Co atom and positively shifts the d band of the Co center, thereby optimizing the PMS adsorption and decomposition into a unique high-valent Fe^IV-O-Co^IV species via a low-energy barrier pathway. This work advances a conceptually novel mechanistic understanding of the enhanced catalytic activity of DACs in Fenton-like reactions and helps to expand the application of DACs in various catalytic reactions.

Generation of FeIV =O and its Contribution to Fenton-Like Reactions on a Single-Atom Iron-N-C Catalyst

Generating Fe^IV =O on single-atom catalysts by Fenton-like reaction has been established for water treatment; however, the Fe^IV =O generation pathway and oxidation behavior remain obscure. Employing an Fe-N-C catalyst with a typical Fe-N₄ moiety to activate peroxymonosulfate (PMS), we demonstrate that generating Fe^IV =O is mediated by an Fe-N-C-PMS* complex-a well-recognized nonradical species for induction of electron-transfer oxidation-and we determined that adjacent Fe sites with a specific Fe₁ -Fe₁ distance are required. After the Fe atoms with an Fe₁ -Fe₁ distance <4 Å are PMS-saturated, Fe-N-C-PMS* formed on Fe sites with an Fe₁ -Fe₁ distance of 4-5 Å can coordinate with the adjacent Fe^II -N₄ , forming an inter-complex with enhanced charge transfer to produce Fe^IV =O. Fe^IV =O enables the Fenton-like system to efficiently oxidize various pollutants in a substrate-specific, pH-tolerant, and sustainable manner, where its prominent contribution manifests for pollutants with higher one-electron oxidation potential.

Different crystallographic Ni(OH)2 as highly efficient Fenton-like catalysts for sulfate radical activation

By a simple hydrothermal method, a phase boundary between α- and β-Ni(OH)₂ can be obtained. The Fenton-like performance of α@β-Ni(OH)₂ is 1.56 times higher than that of single β-Ni(OH). α@β-Ni(OH)₂ displays superior stability compared to α-Ni(OH)₂, β-Ni(OH)₂, and amorphous Ni(OH)₂, which makes significant contributions to developing advanced catalysts in diverse fields.

Fe Single-Atom Catalyst for Cost-Effective yet Highly Efficient Heterogeneous Fenton Catalysis

High energy consumption in pyrolyzing precursors for catalyst preparation would limit the application of nitrogen-doped carbon-based single-atom catalysts in actual pollutant remediation. Herein, we report an Fe single atom (7.67 wt %) loaded polyaniline catalyst (Fe-PANI) prepared via a simple impregnation process without pyrolysis. Both experimental characterizations and density functional theory calculations demonstrated that isolated -N═ group sites can fasten Fe atoms through Fe-N coordination in PANI, leading to a high stability of Fe atoms in a heterogeneous Fenton reaction. Highly dispersive yet dense -N═ groups in PANI can be protonated to be adsorption sites, which largely reduce the migration distance between reactive radicals and organics. More significantly, frontier molecular orbitals and spin-density distributions reveal that electrons can transfer from reduction groups of PANI to an Fe(III) site to accelerate its reduction. As a result, a remarkably boosted degradation behavior of organics under near-neutral conditions (pH 6), with low H₂O₂ concentration, was achieved. This cost-effective Fe-PANI catalyst with high catalytic activity, stability, and adsorption performance has great potential for industrial-level wastewater treatment.

Single-atom site catalysts for environmental remediation: Recent advances

Single-atom site catalysts (SACs) can maximize the utilization of active metal species and provide an attractive way to regulate the activity and selectivity of catalytic reactions. The adjustable coordination configuration and atomic structure of SACs enable them to be an ideal candidate for revealing reaction mechanisms in various catalytic processes. The minimum use of metals and relatively tight anchoring of the metal atoms significantly reduce leaching and environmental risks. Additionally, the unique physicochemical properties of single atom sites endow SACs with superior activity in various catalytic processes for environmental remediation (ER). Generally, SACs are burgeoning and promising materials in the application of ER. However, a systematic and critical review on the mechanism and broad application of SACs-based ER is lacking. Herein, we review emerging studies applying SACs for different ERs, such as eliminating organic pollutants in water, removing volatile organic compounds, purifying automobile exhaust, and others (hydrodefluorination and disinfection). We have summarized the synthesis, characterization, reaction mechanism and structural-function relationship of SACs in ER. In addition, the perspectives and challenges of SACs for ER are also analyzed. We expect that this review can provide constructive inspiration for discoveries and applications of SACs in environmental catalysis in the future.

A Site Distance Effect Induced by Reactant Molecule Matchup in Single-Atom Catalysts for Fenton-Like Reactions

Understanding the site interaction nature of single-atom catalysts (SACs), especially densely populated SACs, is vital for their application to various catalytic reactions. Herein, we report a site distance effect, which emphasizes how well the distance of the adjacent copper atoms (denoted as d_Cu1-Cu1 ) matches with the reactant peroxydisulfate (PDS) molecular size to determine the Fenton-like reaction reactivity on the carbon-supported SACs. The optimized d_Cu1-Cu1 in the range of 5-6 Å, which matches the molecular size of PDS, endows the catalyst with a nearly two times higher turnover frequency than that of d_Cu1-Cu1 beyond this range, accordingly achieving record-breaking kinetics for the oxidation of emerging organic contaminants. Further studies suggest that this site distance effect originates from the alteration of PDS adsorption to a dual-site structure on Cu₁ -Cu₁ sites when d_Cu1-Cu1 falls within 5-6 Å, significantly enhancing the interfacial charge transfer and consequently resulting in the most efficient catalyst for PDS activation so far.

Overturned Loading of Inert CeO2 to Active Co3 O4 for Unusually Improved Catalytic Activity in Fenton-Like Reactions

In the past decades, numerous efforts have been devoted to improving the catalytic activity of nanocomposites by either exposing more active sites or regulating the interaction between the support and nanoparticles while keeping the structure of the active sites unchanged. Here, we report the fabrication of a Co₃ O₄ -CeO₂ nanocomposite via overturning the loading direction, i.e., loading an inert CeO₂ support onto active Co₃ O₄ nanoparticles. The resultant catalyst exhibits unexpectedly higher activity and stability in peroxymonosulfate-based Fenton-like reactions than its analog prepared by the traditional impregnation method. Abundant oxygen vacancies (O_v with a Co⋅⋅⋅O_v ⋅⋅⋅Ce structure instead of Co⋅⋅⋅O_v ) are generated as new active sites to facilitate the cleavage of the peroxide bond to produce SO₄ ^.- and accelerate the rate-limiting step, i.e., the desorption of SO₄ ^.- , affording improved activity. This strategy is a new direction for boosting the catalytic activity of nanocomposite catalysts in various scenarios, including environmental remediation and energy applications.