Robust Molecular Dipole‐Enabled Defect Passivation and Control of Energy‐Level Alignment for High‐Efficiency Perovskite Solar Cells

Universal Hydrogen-Treated TiO2 Nanorod Array/Ti2COX MXene PEC Aptamer Sensor Modulated by the Transport Characteristic of Photogenerated Holes

A semiconductor photoelectrochemical (PEC) aptamer sensor has been widely researched in recent years because of its broad application prospects. However, a universal PEC sensor has not been achieved, and its sensing mechanism based on a photogenerated carrier transfer process has yet to be elucidated. Herein, a novel hydrogen-treated TiO₂ nanorod array one-dimensional (1D)/Ti₂CO_X MXene two-dimensional (2D) (H-TiO₂/Ti₂CO_X) PEC aptamer sensor is presented, which achieved a record detection range of 10^-9-10³ μg/L and a limit of detection (LOD) of 1 fg/L for microcystic toxins-LR detection. Besides, the PEC sensor can also test serotonin (5-HT), aflatoxin-B1, and prostate-specific antigen (PSA) with high performance by changing the aptamers, exhibiting favorable application universality. Furthermore, a new phenomenon of a switchable enhanced/suppressed photocurrent detection signal was discovered from H-TiO₂/Ti₂CO_X PEC aptamer sensors through the variation of the length of the TiO₂ nanorod. Meanwhile, it reveals that the steric hindrance effect determines the photogenerated hole transfer and depolarization processes, which is proposed for the first time as the predominant mechanism of the switchable enhanced/suppressed photocurrent signal for PEC sensors, giving possibilities to develop PEC sensors with higher efficiency.

Multifunctional Molecule Assists Passivate Method to Simultaneously Improve the Efficiency and Stability of Perovskite Solar Cells

The power conversion efficiency (PCE) of perovskite solar cells (PSCs) has been greatly improved recently. However, in organic-inorganic polycrystalline perovskite films many defects inevitably exist, which limits the PCE and stability of PSCs. Herein, a small organic molecule 2-chlorothiazole-4-carboxylic acid (SN) is spin coated on a perovskite film to enhance the performance of PSCs. We find that the multifunctional molecule SN reacts with under-coordinated Pb²⁺ ions and I^- vacancies because of the presence of the sulfur and nitrogen donor atoms, and the -COOH groups, which are conducive to suppressing charge recombination and passivating defects. Even more, the introduction of the SN layer can effectively adjust the energy level alignment, which is conducive to the separation and extraction of charge carriers in PSCs. Therefore, devices with SN modification show a champion PCE of 22.55 %. Besides, PSCs with SN show impressive stability, retaining 96 % of its initial PCE after storage in ambient air for 500 h.

Green-solvent Processable Dopant-free Hole Transporting Materials for Inverted Perovskite Solar Cells

The commercialization of perovskite solar cells (PVSCs) urgently requires the development of green-solvent processable dopant-free hole transporting materials (HTMs). However, strong intermolecular interactions that ensure high hole mobility always compromise the solubility and film-forming ability in green solvents. Herein, we show a simple but effective design strategy to solve this trade-off, that is, constructing star-shaped D-A-D structure. The resulting HTMs (BTP1-2) can be processed by green solvent of 2-methylanisole (2MA), a kind of food additive, and show high hole mobility and multiple defect passivation effects. An impressive efficiency of 24.34 % has been achieved for 2MA-processed BTP1 based inverted PVSCs, the highest value for green-solvent processable HTMs so far. Moreover, it is manifested that the charge separation of D-A type HTMs at the photoinduced excited state can help to passivate the defects of perovskites, indicating a new HTM design insight.

High-Polarizability Organic Ferroelectric Materials Doping for Enhancing the Built-In Electric Field of Perovskite Solar Cells Realizing Efficiency over 24

The built-in electric field (BEF) intensity of silicon heterojunction solar cells can be easily enhanced by selective doping to obtain high power conversion efficiencies (PCEs), while it is challenging for perovskite solar cells (pero-SCs) because of the difficulty in doping perovskites in a controllable way. Herein, an effective method is reported to enhance the BEF of FA_0.92 MA_0.08 PbI₃ perovskite by doping an organic ferroelectric material, poly(vinylidene fluoride):dabcoHReO₄ (PVDF:DH) with high polarizability, that can be driven even by the BEF of the device itself. The polarization of PVDF:DH produces an additional electric field, which is maintained permanently, in a direction consistent with that of the BEF of the pero-SC. The BEF superposition can more sufficiently drive the charge-carrier transport and extraction, thus suppressing the nonradiative recombination occurring in the pero-SCs. Moreover, the PVDF:DH dopant benefits the formation of a mesoporous PbI₂ film, via a typical two-step processing method, thereby promoting perovskite growth with high crystallinity and a few defects. The resulting pero-SC shows a promising PCE of 24.23% for a 0.062 cm² device (certified PCE of 23.45%), and a remarkable PCE of 22.69% for a 1 cm² device, along with significantly improved moisture resistances and operational stabilities.

Synergy Effect of a π-Conjugated Ionic Compound: Dual Interfacial Energy Level Regulation and Passivation to Promote Voc and Stability of Planar Perovskite Solar Cells

Defects and energy offsets at the bulk and heterojunction interfaces of perovskite are detrimental to the efficiency and stability of perovskite solar cells (PSCs). Herein, we designed an amphiphilic π-conjugated ionic compound (QAPyBF₄ ), implementing simultaneous defects passivation and interface energy level alignments. The p-type conjugated cations passivated the surface trap states and optimized energy alignment at the perovskite/hole transport layer. The highly electronegative [BF₄ ]^- enriched at the SnO₂ interface featured desired band alignment due to the dipole moment of this interlayer. The planar n-i-p PSC had an efficiency of 23.1 % with V_oc of 1.2 V. Notably, the synergy effect elevated the intrinsic endothermic decomposition temperature of the perovskite. The modified devices showed excellent long-term thermal (85 °C) and operational stability at the maximum power point for 1000 h at 45 °C under continuous one-sun illumination with no appreciable efficiency loss.

Interface chelation induced by pyridine-based polymer for efficient and durable air-processed perovskite solar cells

Polymer doping is a significant approach to precisely control nucleation and crystal growth of perovskites and enhance electronic quality in perovskite solar cells (PSC) prepared in air. Here, a brand-new self-healing polysiloxane (SHP) with dynamic 2,6-pyridinedicarboxamide (PDCA) coordination units and plenty of hydrogen bonds was designed and incorporated into perovskite films. PDCA units, showing strong intermolecular Pb 2+ -N amido , I - -N pyridyl , and Pb 2+ -O amido coordination interactions, were expected to enhance crystallinity and passivate the grain boundary. In addition, abundant hydrogen bonds in SHP afforded the self-healing of cracks at grain boundaries for fatigue PSCs. Significantly, the doped device demonstrated a champion efficiency of 19.50% with inconspicuous hysteresis, almost rivaling those achieved in control atmosphere. This strategy of heterocyclic-based macromolecular doping in PSCs will pave a way for realizing efficient and durable crystalline semiconductors.