Decarboxylation‐Induced Defects in MOF‐Derived Single Cobalt Atom@Carbon Electrocatalysts for Efficient Oxygen Reduction

Microwave-Assisted Rapid Synthesis of MOF-Based Single-Atom Ni Catalyst for CO2 Electroreduction at Ampere-Level Current

Carbon-based single-atom catalysts (SACs) have attracted tremendous interest in heterogeneous catalysis. However, the common electric heating techniques to produce carbon-based SACs usually suffer from prolonged heating time and tedious operations. Herein, a general and facile microwave-assisted rapid pyrolysis method is developed to afford carbon-based SACs within 3 min without inert gas protection. The obtained carbon-based SACs present high porosity and comparable carbonization degree to those obtained by electric heating techniques. Specifically, the single-atom Ni implanted N-doped carbon (Ni1 -N-C) derived from a Ni-doped metal-organic framework (Ni-ZIF-8) exhibits remarkable CO Faradaic efficiency (96 %) with a substantial CO partial current density (jCO ) up to 1.06 A/cm2 in CO2 electroreduction, far superior to the counterpart obtained by traditional pyrolysis with electric heating. Mechanism investigations reveal that the resulting Ni1 -N-C presents abundant defective sites and mesoporous structure, greatly facilitating CO2 adsorption and mass transfer. This work establishes a versatile approach to rapid and large-scale synthesis of SACs as well as other carbon-based materials for efficient catalysis.

Ionic Covalent Organic Frameworks-Derived Cobalt Single Atoms and Nanoparticles for Efficient Oxygen Electrocatalysis

Metal single atoms show outstanding electrocatalytic activity owing to the abundant atomic reactive sites and superior stability. However, the preparation of single atoms suffers from inexorable metal aggregation which is harmful to electrocatalytic activity. Here, ionic covalent organic frameworks (iCOFs) are employed as the sacrificial precursor to mitigate the metal aggregation and subsequent formation of bulky particles. Molecular dynamics simulation shows that iCOFs can trap and confine more Co ions as compared to neutral COFs, resulting in the formation of a catalyst composed of Co single atoms and uniformly distributed Co nanoparticles (Co_SA &Co_NP-10 ). However, the neutral COFs derive a catalyst composed of Co atomic clusters and large Co nanoparticles (Co_AC &Co_NP-25 ). The Co_SA &Co_NP-10 catalyst exhibits higher oxygen bifunctional electrocatalytic activities than Co_AC &Co_NP-25 , coinciding with the density functional theory results. Taking the Co_SA &Co_NP-10 as the air cathode in Zn-air batteries (ZABs), the aqueous ZAB presents a high power density of 181 mW cm^-2 , a specific capacity of 811 mAh g^-1 as well as a long cycle life of 407 h at a current density of 10 mA cm^-2 , while the quasi-solid state ZAB displays a power density of 179 mW cm^-2 and the cycle life of 30 h.

Atomically Dispersed Zn-Pyrrolic-N4 Cathode Catalysts for Hydrogen Fuel Cells

To achieve practical application of fuel cell, it is vital to develop highly efficient and durable Pt-free catalysts. Herein, we prepare atomically dispersed ZnNC catalysts with Zn-Pyrrolic-N₄ moieties and abundant mesoporous structure. The ZnNC-based anion-exchange membrane fuel cell (AEMFC) presents an ultrahigh peak power density of 1.63 and 0.83 W cm^-2 in H₂ -O₂ and H₂ -air (CO₂ -free), and also exhibits long-term stability with more than 120 and 100 h for H₂ -air (CO₂ -free) and H₂ -O₂ , respectively. Density functional calculations further unveil that the Zn-Pyrrolic-N₄ structure is the origin of high activity of as-synthesized ZnNC catalyst, while the Zn-Pyridinic-N₄ moiety is inactive for oxygen reduction reaction (ORR), which successfully explain the puzzle why most Zn-metal-organic framework -derived ZnNC catalysts in previous reports did not present good ORR activity because of their Zn-Pyridinic-N₄ moieties. This work offers a new route for speeding up development of AEMFCs.

Novel (Pt-Ox )-(Co-Oy ) Nonbonding Active Structures on Defective Carbon from Oxygen-Rich Coal Tar Pitch for Efficient HER and ORR

Atomic-scale utilization and coordination structure of Pt electrocatalyst is extremely crucial to decrease loading mass and maximize activity for hydrogen evolution reactions (HERs) and oxygen reduction reactions (ORRs). A novel atomic-scale (Pt-O_x )-(Co-O_y ) nonbonding active structure is designed and constructed by anchoring Pt single atoms and Co atomic clusters on the defective carbon derived from oxygen-rich coal tar pitch (CTP). The Pt loading mass is extremely low and only 0.56 wt%. A new nonbonding interaction phenomenon between Pt-O_x and Co-O_y is found and confirmed based on X-ray absorption spectroscopy and density functional theory calculations. Based on the (Pt-O_x )-(Co-O_y ) nonbonding active structure, surface chemical field coupling with electrocatalysis for the HER and ORR is confirmed. It is found that the (Pt-O_x )-(Co-O_y ) nonbonding active structure exhibits high mass activities of 64.4 A cm^-2 mg_Pt ^-1 (at an overpotential of 100 mV) and 7.2 A cm^-2 mg_Pt ^-1 (at 0.8 V vs reversible hydrogen electrode) for the HER and ORR, respectively. The values are 6.5 and 11.6 times as much as those of commercial 20% Pt/C. The work provides innovative insight to design and understand efficient active sites of atomic-scale Pt on oxygen-rich CTP-derived carbon supports for electrocatalysis.