Studying the Conversion Mechanism to Broaden Cathode Options in Aqueous Zinc‐Ion Batteries

Doping Engineering in Manganese Oxides for Aqueous Zinc-Ion Batteries

Manganese oxides (MnxOy) are considered a promising cathode material for aqueous zinc-ion batteries (AZIBs) due to their high theoretical specific capacity, various oxidation states and crystal phases, and environmental friendliness. Nevertheless, their practical application is limited by their intrinsic poor conductivity, structural deterioration, and manganese dissolution resulting from Jahn-Teller distortion. To address these problems, doping engineering is thought to be a favorable modification strategy to optimize the structure, chemistry, and composition of the material and boost the electrochemical performance. In this review, the latest progress on doped MnxOy-based cathodes for AZIBs has been systematically summarized. The contents of this review are as follows: (1) the classification of MnxOy-based cathodes; (2) the energy storage mechanisms of MnxOy-based cathodes; (3) the synthesis route and role of doping engineering in MnxOy-based cathodes; and (4) the doped MnxOy-based cathodes for AZIBs. Finally, the development trends of MnxOy-based cathodes and AZIBs are described.

Porous CuO Microspheres as Long-Lifespan Cathode Materials for Aqueous Zinc-Ion Batteries

Cathode materials with conversion mechanisms for aqueous zinc-ion batteries (AZIBs) have shown a great potential as next-generation energy storage materials due to their high discharge capacity and high energy density. However, improving their cycling stability has been the biggest challenge plaguing researchers. In this study, CuO microspheres were prepared using a simple hydrothermal reaction, and the morphology and crystallinity of the samples were modulated by controlling the hydrothermal reaction time. The as-synthesized materials were used as cathode materials for AZIBs. The electrochemical experiments showed that the CuO-4h sample, undergoing a hydrothermal reaction for 4 h, had the longest lifecycle and the best rate of capability. A discharge capacity of 131.7 mAh g-1 was still available after 700 cycles at a current density of 500 mA g-1. At a high current density of 1.5 A g-1, the maintained capacity of the cell is 85.4 mA h g-1. The structural evolutions and valence changes in the CuO-4h cathode material were carefully explored by using ex situ XRD and ex situ XPS. CuO was reduced to Cu2O and Cu after the initial discharge, and Cu was oxidized to Cu2O instead of CuO during subsequent charging processes. We believe that these findings could introduce a novel approach to exploring high-performance cathode materials for AZIBs.

Advanced cathodes for aqueous Zn batteries beyond Zn2+ intercalation

Aqueous zinc (Zn) batteries have attracted global attention for energy storage. Despite significant progress in advancing Zn anode materials, there has been little progress in cathodes. The predominant cathodes working with Zn2+/H+ intercalation, however, exhibit drawbacks, including a high Zn2+ diffusion energy barrier, pH fluctuation(s) and limited reproducibility. Beyond Zn2+ intercalation, alternative working principles have been reported that broaden cathode options, including conversion, hybrid, anion insertion and deposition/dissolution. In this review, we report a critical assessment of non-intercalation-type cathode materials in aqueous Zn batteries, and identify strengths and weaknesses of these cathodes in small-scale batteries, together with current strategies to boost material performance. We assess the technical gap(s) in transitioning these cathodes from laboratory-scale research to industrial-scale battery applications. We conclude that S, I2 and Br2 electrodes exhibit practically promising commercial prospects, and future research is directed to optimizing cathodes. Findings will be useful for researchers and manufacturers in advancing cathodes for aqueous Zn batteries beyond Zn2+ intercalation.

Building a Rechargeable Voltaic Battery via Reversible Oxide Anion Insertion in Copper Electrodes

Voltaic pile, the very first battery built by humanity in 1800, plays a seminal role in battery development history. However, the premature design leads to the inevitable copper ion dissolution issue, which dictates its primary battery nature. To address this issue, solid-state electrolytes, ion exchange membranes, and/or sophisticated electrolytes are widely utilized, leading to high costs and complicated cell configuration. Herein, we build a rechargeable zinc-copper voltaic battery from simple and cheap electrolyte/separator materials, thus eliminating the need to use the above components. Notably, our battery leverages the Zn4SO4(OH)6·xH2O precipitation in ZnSO4 electrolytes, a common side reaction in zinc batteries, to provide a "locally alkaline" environment for copper electrodes. Consequently, oxide (O2-) anion insertion takes place and readily transforms copper to copper(I) oxide (Cu2O) without any copper ion dissolution issue. Therefore, this battery realizes a high capacity of ∼370 mA h g-1 and a long cycling of ∼500 cycles. Our work provides an innovative approach to stabilize anion insertion in metal electrodes for energy storage.

Tendency Regulation of Competing Reactions Toward Highly Reversible Tin Anode for Aqueous Alkaline Batteries

Investigating dendrite-free stripping/plating anodes is highly significant for advancing the practical application of aqueous alkaline batteries. Sn has been identified as a promising candidate for anode material, but its deposition/dissolution efficiency is hindered by the strong electrostatic repulsion between Sn(OH)3 - and the substrate. Herein, this work constructs a nondense copper layer which serves as stannophile and hydrogen evolution inhibitor to adjust the tendency of competing reactions on Sn foil surface, thus achieving a highly reversible Sn anode. The interactions between the deposited Sn and the substrates are also strengthened to prevent shedding. Notably, the ratio of Sn redox reaction is significantly boosted from ≈20% to ≈100%, which results in outstanding cycling stability over 560 h at 10 mA cm-2 . A Sn//Ni(OH)2 battery device is also demonstrated with capacities from 0.94 to 22.4 mA h cm-2 and maximum stability of 1800 cycles.

Challenges and Strategies in the Development of Zinc-Ion Batteries

Although promising, the practical use of zinc-ion batteries (ZIBs) remains plagued with uncontrollable dendrite growth, parasitic side reactions, and the high intercalation energy of divalent Zn²⁺ ions. Hence, much work has been conducted to alleviate these issues to maximize the energy density and cyclic life of the cell. In this holistic review, the mechanisms and rationale for the stated challenges shall be summarized, followed by the corresponding strategies employed to mitigate them. Thereafter, a perspective on present research and the outlook of ZIBs would be put forth in hopes to enhance their electrochemical properties in a multipronged approach.

pH-Triggered Molecular Switch Toward Texture-Regulated Zn Anode

Zn electrodes in aqueous media exhibit an unstable Zn/electrolyte interface due to severe parasitic reactions and dendrite formation. Here, a dynamic Zn interface modulation based on the molecular switch strategy is reported by hiring γ-butyrolactone (GBL) in ZnCl₂ /H₂ O electrolyte. During Zn plating, the increased interfacial alkalinity triggers molecular switch from GBL to γ-hydroxybutyrate (GHB). GHB strongly anchors on Zn surface via triple Zn-O bonding, leading to suppressive hydrogen evolution and texture-regulated Zn morphology. Upon Zn stripping, the fluctuant pH turns the molecular switch reaction off through the cyclization of GHB to GBL. This dynamic molecular switch strategy enables high Zn reversibility with Coulombic efficiency of 99.8 % and Zn||iodine batteries with high-cyclability under high Zn depth of discharge (50 %). This study demonstrates the importance of dynamic modulation for Zn electrode and realizes the reversible molecular switch strategy to enhance its reversibility.

In Situ Formation of Nitrogen-Rich Solid Electrolyte Interphase and Simultaneous Regulating Solvation Structures for Advanced Zn Metal Batteries

Zn metal as one of promising anode materials for aqueous batteries suffers from notorious dendrite growth, serious Zn corrosion and hydrogen evolution. Here, a bifunctional electrolyte additive, N-methyl pyrrolidone (NMP), is developed to improve the electrochemical performance of Zn anode. NMP not only alters the solvation structure of Zn²⁺ , but also in situ produces a dense N-rich solid-electrolyte-interphase layer on Zn foils. This layer protects Zn foils from corrosive electrolytes and benefits the uniform plating/stripping of Zn. Hence, the asymmetrical cells with NMP in the electrolyte retain a high coulombic efficiency of 99.8 % over 1000 cycles. The symmetric cells survive ≈200 h for 10 mAh cm^-2 at a high Zn utilization of 85.6 %. The full cells of Zn||MnO₂ show an impressive cumulative capacity even with lean electrolyte (E/C ratio=10 μL mAh^-1 ), limited Zn supply (N/P ratio=2.3) and high areal capacity (5.0 mAh cm^-2 ).

Heterostructures Stimulate Electric-Field to Facilitate Optimal Zn2+ Intercalation in MoS2 Cathode

The electric-field effect is an important factor to enhance the charge diffusion and transfer kinetics of interfacial electrode materials. Herein, by designing a heterojunction, the influence of the electric-field effect on the kinetics of the MoS₂ as cathode materials for aqueous Zn-ion batteries (AZIBs) is deeply investigated. The hybrid heterojunction is developed by hydrothermal growth of MoS₂ nanosheets on robust titanium-based transition metal compound ([titanium nitride, TiN] and [titanium oxide, TiO₂ ]) nanowires, denoted TNC@MoS₂ and TOC@MoS₂ NWS, respectively. Benefiting from the heterostructure architecture and electric-field effect, the TNC@MoS₂ electrodes exhibit an impressive rate performance of 200 mAh g^-1 at 50 mA g^-1 and cycling stability over 3000 cycles. Theoretical studies reveal that the hybrid architecture exhibits a large-scale electric-field effect at the interface between TiN and MoS₂ , enhances the adsorption energy of Zn-ions, and increases their charge transfer, which leads to accelerated diffusion kinetics. In addition, the electric-field effect can also be effectively applied to TiO₂ and MoS₂ , confirming that the concept of heterostructures stimulating electric-field can provide a relevant understanding for the architecture of other cathode materials for AZIBs and beyond.

Understanding H2 Evolution Electrochemistry to Minimize Solvated Water Impact on Zinc-Anode Performance

H₂ evolution is the reason for poor reversibility and limited cycle stability with Zn-metal anodes, and impedes practical application in aqueous zinc-ion batteries (AZIBs). Here, using a combined gas chromatography experiment and computation, it is demonstrated that H₂ evolution primarily originates from solvated water, rather than free water without interaction with Zn²⁺ . Using linear sweep voltammetry (LSV) in salt electrolytes, H₂ evolution is evidenced to occur at a more negative potential than zinc reduction because of the high overpotential against H₂ evolution on Zn metal. The hypothesis is tested and, using a glycine additive to reduce solvated water, it is confirmed that H₂ evolution and "parasitic" side reactions are suppressed on the Zn anode. This electrolyte additive is evidenced to suppress H₂ evolution, reduce corrosion, and give a uniform Zn deposition in Zn|Zn and Zn|Cu cells. It is demonstrated that Zn|PANI (highly conductive polyaniline) full cells exhibit boosted electrochemical performance in 1 M ZnSO₄ -3 M glycine electrolyte. It is concluded that this new understanding of electrochemistry of H₂ evolution can be used for design of relatively low-cost and safe AZIBs for practical large-scale energy storage.

Triple-Function Electrolyte Regulation toward Advanced Aqueous Zn-Ion Batteries

The poor Zn reversibility has been criticized for limiting applications of aqueous Zn-ion batteries (ZIBs); however, its behavior in aqueous media is not fully uncovered yet. Here, this knowledge gap is addressed, indicating that Zn electrodes face a O₂ -involving corrosion, besides H₂ evolution and dendrite growth. Differing from aqueous Li/Na batteries, removing O₂ cannot enhance ZIB performance because of the aggravated competing H₂ evolution. To address Zn issues, a one-off electrolyte strategy is reported by introducing the triple-function C₃ H₇ Na₂ O₆ P, which can take effects during the shelf time of battery. It regulates H⁺ concentration and reduces free-water activity, inhibiting H₂ evolution. A self-healing solid/electrolyte interphase (SEI) can be triggered before battery operation, which suppresses O₂ adsorption corrosion and dendritic deposition. Consequently, a high Zn reversibility of 99.6% is achieved under a high discharge depth of 85%. The pouch full-cell with a lean electrolyte displays a record lifespan with capacity retention of 95.5% after 500 cycles. This study not only looks deeply into Zn behavior in aqueous media but also underscores rules for the design of active metal anodes, including Zn and Li metals, during shelf time toward real applications.

A Review on 3D Zinc Anodes for Zinc Ion Batteries

Zinc ion batteries (ZIBs) have been gradually developed in recent years due to their abundant resources, low cost, and environmental friendliness. Therefore, ZIBs have received a great deal of attention from researchers, which are considered as the next generation of portable energy storage systems. However, poor overall performance of ZIBs restricts their development, which is attributed to zinc dendrites and a series of side reactions. Constructing 3D zinc anodes has proven to be an effective way to significantly improve their electrochemical performance. In this review, the challenges of zinc anodes in ZIBs, including zinc dendrites, hydrogen evolution and corrosion, as well as passivation, are comprehensively summarized and the energy storage mechanisms of the zinc anodes and 3D zinc anodes are discussed. 3D zinc anodes with different structures including fiberous, porous, ridge-like structures, plated zinc anodes on different substrates and other 3D zinc anodes, are subsequently discussed in detail. Finally, emerging opportunities and perspectives on the material design of 3D zinc anodes are highlighted and challenges that need to be solved in future practical applications are discussed, hopefully illuminating the way forward for the development of ZIBs.

Design Strategies for High-Energy-Density Aqueous Zinc Batteries

In recent years, the increasing demand for high-capacity and safe energy storage has focused attention on zinc batteries featuring high voltage, high capacity, or both. Despite extensive research progress, achieving high-energy-density zinc batteries remains challenging and requires the synergistic regulation of multiple factors including reaction mechanisms, electrodes, and electrolytes. In this Review, we comprehensively summarize the rational design strategies of high-energy-density zinc batteries and critically analyze the positive effects and potential issues of these strategies in optimizing the electrochemistry, cathode materials, electrolytes, and device architecture. Finally, the challenges and perspectives for the further development of high-energy-density zinc batteries are outlined to guide research towards new-generation batteries for household appliances, low-speed electric vehicles, and large-scale energy storage systems.

Application of a conversion electrode based on decomposition derivatives of Ag4[Fe(CN)6] for aqueous electrolyte batteries

The lack of stable electrode materials for water-based electrolytes due to the intercalation and conversion reaction mechanisms encourage scientists to design new or renovate existing materials with better cyclability, capacity, and cost-effectiveness. Ag₄[Fe(CN)₆] is a material belonging to the Prussian blue family that can be used, as its other family members, as an electrode material with the intercalation/deintercalation reaction or conversion-type mechanism through Ag oxidation/reduction. However, due to the instability of this material in its dry state, it decomposes to AgCN and a Prussian blue residual complex. A possible reason for Ag₄[Fe(CN)₆] decomposition is discussed. Nevertheless, it is shown that the decomposition products of Ag₄[Fe(CN)₆] have electrochemical activity due to the reversible oxidation/reduction of Ag atoms in water-based electrolytes.