Zinc Containing Small‐Pore Zeolites for Capture of Low Concentration Carbon Dioxide

Reversible CO2 Fixation and Release by a Trinuclear Zn(II) Cryptate Complex and Operando Analysis of the Complex Structure

Metal complexes inspired by carbonic anhydrase (CA), which is a metalloenzyme containing Zn(II), have been investigated as alternatives for CO2 fixation systems operating under ambient temperature and pressure conditions. In this study, we designed a trinuclear Zn(II) cryptate complex (Zn3 L) and demonstrated rapid CO2 fixation with carbonation of CO2 using Zn3 L. The CO2 fixation performance of Zn3 L surpassed that of a standard CO2 absorbent, KOH(aq) solution, under conditions of the same solute concentration. In addition, the reaction achieved operation without support addition of base, which has been often required in systems of CA-inspired complexes. Fixed CO2 was released by protonating polyazacryptate ligand (L) and breaking the complex structure, and deprotonation of L induced the reconstruction of Zn3 L, allowing it to refix CO2 . This reaction mechanism was proposed based on the analysis of operando extended X-ray absorption fine structure spectroscopy. Zn3 L also demonstrated the ability to capture dilute CO2 from air, and the volume of CO2 captured by Zn3 L was approximately 2.6 times that captured by the KOH(aq) solution. Our Zn3 L exhibited three valuable properties: rapid CO2 fixation without a base, reversibility, and ability to capture dilute CO2 ; thus Zn3 L is a promising candidate as CO2 fixatives.

Support Pore Structure and Composition Strongly Influence the Direct Air Capture of CO2 on Supported Amines

A variety of amine-impregnated porous solid sorbents for direct air capture (DAC) of CO₂ have been developed, yet the effect of amine-solid support interactions on the CO₂ adsorption behavior is still poorly understood. When tetraethylenepentamine (TEPA) is impregnated on two different supports, commercial γ-Al₂O₃ and MIL-101(Cr), they show different trends in CO₂ sorption when the temperature (-20 to 25 °C) and humidity (0-70% RH) of the simulated air stream are varied. In situ IR spectroscopy is used to probe the mechanism of CO₂ sorption on the two supported amine materials, with weak chemisorption (formation of carbamic acid) being the dominant pathway over MIL-101(Cr)-supported TEPA and strong chemisorption (formation of carbamate) occurring over γ-Al₂O₃-supported TEPA. Formation of both carbamic acid and carbamate species is enhanced over the supported TEPA materials under humid conditions, with the most significant enhancement observed at -20 °C. However, while equilibrium H₂O sorption is high at cold temperatures (e.g., -20 °C), the effect of humidity on a practical cyclic DAC process is expected to be minimal due to slow H₂O uptake kinetics. This work suggests that the CO₂ capture mechanisms of impregnated amines can be controlled by adjusting the degree of amine-solid support interaction and that H₂O adsorption behavior is strongly affected by the properties of the support materials. Thus, proper selection of solid support materials for amine impregnation will be important for achieving optimized DAC performance under varied deployment conditions, such as cold (e.g., -20 °C) or ambient temperature (e.g., 25 °C) operations.

Zeolites in Adsorption Processes: State of the Art and Future Prospects

Zeolites have been widely used as catalysts, ion exchangers, and adsorbents since their industrial breakthrough in the 1950s and continue to be state-of the-art adsorbents in many separation processes. Furthermore, their properties make them materials of choice for developing and emerging separation applications. The aim of this review is to put into context the relevance of zeolites and their use and prospects in adsorption technology. It has been divided into three different sections, i.e., zeolites, adsorption on nanoporous materials, and chemical separations by zeolites. In the first section, zeolites are explained in terms of their structure, composition, preparation, and properties, and a brief review of their applications is given. In the second section, the fundamentals of adsorption science are presented, with special attention to its industrial application and our case of interest, which is adsorption on zeolites. Finally, the state-of-the-art relevant separations related to chemical and energy production, in which zeolites have a practical or potential applicability, are presented. The replacement of some of the current separation methods by optimized adsorption processes using zeolites could mean an improvement in terms of sustainability and energy savings. Different separation mechanisms and the underlying adsorption properties that make zeolites interesting for these applications are discussed.