Insight into and Practical Application of pH-Controlled Asymmetric Transfer Hydrogenation of Aromatic Ketones in Water

Ru(II)-Catalyzed Asymmetric Transfer Hydrogenation of α-Alkyl-β-Ketoaldehydes via Dynamic Kinetic Resolution

The (R,R)-Teth-TsDPEN-Ru(II) complex promoted the one-pot double C=O reduction of α-alkyl-β-ketoaldehydes through asymmetric transfer hydrogenation/dynamic kinetic resolution (ATH-DKR) under mild conditions. In this process, ten anti-2-benzyl-1-phenylpropane-1,3-diols (85:15 to 92:8 dr) were obtained in good yields (41-87%) and excellent enantioselectivities (>99% ee for all compounds). Notably, the preferential reduction of the aldehyde moiety led to the in situ formation of 2-benzyl-3-hydroxy-1-phenylpropan-1-one intermediates. These intermediates played a crucial role in enhancing both reactivity and stereoselectivity through hydrogen bonding.

Reductive Amination of Levulinic Acid to Pyrrolidones: Key Step in Biomass Valorization towards Nitrogen-Containing Chemicals

Nowadays, the field of biomass conversion is gradually moving towards an encouraging stage. The preparation of nitrogen-containing chemicals using various biomass resources instead of fossil resources do not only reduce carbon emissions, but also diversify the products of biomass conversion, thus increasing the economic competitiveness of biomass refining systems. Levulinic acid (LA) can be used as a promising intermediate in biomass conversion for further synthesis of pyrrolidone via reductive amination. However, there are still many critical issues to be solved. Particularly, the specific effects of catalysts on the performance of LA reductive amination have not been sufficiently revealed, and the potential impacts of key conditional factors have not been clearly elucidated. In view of this, this review attempts to provide theoretical insights through an in-depth interpretation of the above key issues. The contribution of catalysts to the reductive amination of LA as well as the catalyst structural preferences for improving catalytic performance are discussed. In addition, the role of key conditional factors is discussed. The insights presented in this review will contribute to the design of catalyst nanostructures and the rational configuration of green reaction conditions, which may provide inspiration to facilitate the nitrogen-related transformation of more biomass platform molecules.

Exploring Hydrogen Sources in Catalytic Transfer Hydrogenation: A Review of Unsaturated Compound Reduction

Catalytic transfer hydrogenation has emerged as a pivotal chemical process with transformative potential in various industries. This review highlights the significance of catalytic transfer hydrogenation, a reaction that facilitates the transfer of hydrogen from one molecule to another, using a distinct molecule as the hydrogen source in the presence of a catalyst. Unlike conventional direct hydrogenation, catalytic transfer hydrogenation offers numerous advantages, such as enhanced safety, cost-effective hydrogen donors, byproduct recyclability, catalyst accessibility, and the potential for catalytic asymmetric transfer hydrogenation, particularly with chiral ligands. Moreover, the diverse range of hydrogen donor molecules utilized in this reaction have been explored, shedding light on their unique properties and their impact on catalytic systems and the mechanism elucidation of some reactions. Alcohols such as methanol and isopropanol are prominent hydrogen donors, demonstrating remarkable efficacy in various reductions. Formic acid offers irreversible hydrogenation, preventing the occurrence of reverse reactions, and is extensively utilized in chiral compound synthesis. Unconventional donors such as 1,4-cyclohexadiene and glycerol have shown a good efficiency in reducing unsaturated compounds, with glycerol additionally serving as a green solvent in some transformations. The compatibility of these donors with various catalysts, substrates, and reaction conditions were all discussed. Furthermore, this paper outlines future trends which include the utilization of biomass-derived hydrogen donors, the exploration of hydrogen storage materials such as metal-organic frameworks (MOFs), catalyst development for enhanced activity and recyclability, and the utilization of eco-friendly solvents such as glycerol and ionic liquids. Innovative heating methods, diverse base materials, and continued research into catalyst-hydrogen donor interactions are aimed to shape the future of catalytic transfer hydrogenation, enhancing its selectivity and efficiency across various industries and applications.

Switchable Nanostructures Triggered by Noyori-Type Organometallics

Janus particles (JPs) self-assembled by a typical small organic gemini surfactant in water were reported by us. After the addition of a small amount Noyori-type organometallics to an organic solvent, these gourd-shaped JPs became new nanostructures, such as nanotubes (NTs), nanoribbons (NRs), and new types of JPs. Significant changes in specific rotation occurred on the solution-like samples, triggered by chiral organometallics in 20 μL of ethyl acetate. Almost all of these organometallics-triggered nanostructures can be conveniently detached and reversed within 5 min due to the easy-phase separation of ethyl acetate from the emulsion and the chemical-selective unstable binding between the organometallics and carbonate group on the surfactant.

Heterocycle-containing Noyori-Ikariya catalysts for asymmetric transfer hydrogenation of ketones

The synthesis of a range of N-(heterocyclesulfonyl)-functionalised Noyori-Ikariya catalysts is described. The complexes were prepared through a short sequence from C2-symmetric 1,2-diphenylethylene-1,2-diamine (DPEN) and were characterised by a range of methods including X-ray crystallography. The complexes were active catalysts for the asymmetric transfer hydrogenation (ATH) of a range of acetophenone derivatives, giving products of high ee in most cases, with notably good results for ortho-substituted acetophenones.

Highly Enantioselective Rhodium-Catalyzed Transfer Hydrogenation of Tetrasubstituted Olefins: Application toward the Synthesis of GPR40 Agonist MK-2305

A highly efficient enantioselective synthesis for the potent G-protein-coupled receptor 40 agonist MK-2305 was developed. The key tetrasubstituted olefin was prepared via a stereoselective Mukaiyama aldol reaction/elimination sequence. The highly enantioselective rhodium-catalyzed transfer hydrogenation of the tetrasubstituted olefin afforded the target compound MK-2305 in excellent optical and chemical purity. The key asymmetric transfer hydrogenation proceeds in excellent yields and enantioselectivities for a variety of substrates. The superior reactivity of the tethered catalysts was revealed by NMR studies.

Iridium/f-diaphos catalyzed asymmetric hydrogenation of 2-imidazolyl aryl/alkyl ketones

The iridium/f-diaphos L1, L5 or L12 catalyzed asymmetric hydrogenation of 2-imidazolyl aryl/alkyl ketones to afford two enantiomers of the desired chiral alcohols with high conversions (up to 99% yield) and moderate to excellent enantioselectivities (61% - >99% ee) was realized for the first time. This protocol could be easily conducted on a gram-scale with a TON of 9700.

Continuous Flow Chiral Amine Racemization Applied to Continuously Recirculating Dynamic Diastereomeric Crystallizations

A new, dynamic diastereomeric crystallization method has been developed, in which the mother liquors are continuously separated, racemized over a fixed-bed catalyst, and recirculated to the crystallizer in a resolution-racemization-recycle (R³) process. Separating the racemization from crystallization overcomes problems of using catalysts in situ, that suffer conflicting sets of conditions, inhibition, and separation. Continuous racemization has been achieved through the covalent attachment of [IrCp*I₂]₂ SCRAM catalyst to Wang resin solid support to give a fixed-bed catalyst. One tertiary and a variety of secondary optically enriched amines have been racemized efficiently, with residence times compatible with the crystallization (2.25-30 min). The catalyst demonstrates lower turnover (TOF) than the homogeneous analogue but with reuse shows a long lifetime (e.g., 40 recycles, 190 h) giving acceptable turnover number (TON) (up to 4907). The slow release of methylamine during racemization of N-methyl amines was found to inactivate the catalyst, which could be partially reactivated using hydroiodic acid. Dynamic crystallization is achieved in the R³ process through the continual removal of the more soluble diastereomer and supply of the less soluble one. The solubility of the diastereomers was determined, and the difference correlates to the rate of resolution but is also affected by the rates of racemization, crystal growth, and dissolution. A variety of cyclic and acyclic amine salts were resolved using mandelic acid (MA) and ditoluoyl tartaric acid (DTTA) with higher resolvability (S = yield × d.e.) than the simple diastereomeric crystallization alone. Comparing resolvabilities, resolutions were 1.6-44 times more effective with the R³ process than batch, though one case was worse. Further investigation of this revealed an unusual thermodynamic switching behavior: rac-N-methylphenethylamine was initially resolved as an (S,S)-bis-alkylammonium tartrate crystal but over time became the equivalent (R,S) salt. Thermal, mixing, concentration, stoichiometry, and seeding conditions were all found to affect the onset of the switching behavior which is only associated with difunctional resolving reagents.

pH-Dependent transfer hydrogenation or dihydrogen release catalyzed by a [(η6-arene)RuCl(κ2-N,N-dmobpy)]+ complex: a DFT mechanistic understanding

The reaction mechanism of the pH-dependent transfer hydrogenation of a ketone or the dehydrogenation of formic acid catalyzed by a [(η6-arene)RuCl(κ2-N,N-dmobpy)]+ complex in aqueous media has been investigated using the density functional theory (DFT) method. The TM-catalyzed TH of ketones with formic acid as the hydrogen source proceeds via two steps: the formation of a metal hydride and the transfer of the hydride to the substrate ketone. The calculated results show that ruthenium hydride formation is the rate-determining step. This proceeds via an ion-pair mechanism with an energy barrier of 14.1 kcal mol-1. Interestingly, the dihydrogen release process of formic acid and the hydride transfer process that produces alcohols are competitive under different pH environments. The investigation explores the feasibility of the two pathways under different pH environments. Under acidic conditions (pH = 4), the free energy barrier of the dihydrogen release pathway is 4.5 kcal mol-1 that is higher than that of the hydride transfer pathway, suggesting that the hydride transfer pathway is more favorable than the dihydrogen release pathway. However, under strongly acidic conditions, the dihydrogen release pathway is more favorable compared to the hydride transfer pathway. In addition, the ruthenium hydride formation pathway is less favorable than the ruthenium hydroxo complex formation pathway under basic conditions.

Rh(iii)-Catalyzed diastereoselective transfer hydrogenation: an efficient entry to key intermediates of HIV protease inhibitors

A highly efficient diastereoselective transfer hydrogenation of α-aminoalkyl α′-chloromethyl ketones catalyzed by a tethered rhodium complex was developed and successfully utilized in the synthesis of the key intermediates of HIV protease inhibitors.

Room-Temperature Asymmetric Transfer Hydrogenation of Biomass-Derived Levulinic Acid to Optically Pure γ-Valerolactone Using a Ruthenium Catalyst

This study presents a first report on ruthenium-catalyzed asymmetric transfer hydrogenation (ATH) of levulinic acid (LA) to chiral γ-valerolactone (GVL). ATH of LA has been explored with Noyori's chiral catalyst (Ru-TsDPEN) in methanol solvent. Efficacy of ATH reaction of LA was investigated under different reactions conditions such as temperature, catalyst, and hydrogen donor concentration. The effect of various organic tertiary bases along with formic acid (FA) as a hydrogen donor was studied, and N-methylpiperidine with FA (1:1 molar ratio) was revealed as an efficient hydrogen donor for ATH of LA to GVL furnishing chiral GVL with complete conversion and 93% enantiomeric excess (ee). This operationally simple and mild ATH protocol was tested for practical applicability of ATH of LA obtained from biomass waste (rice husk and wheat straw) and furnished chiral GVL with 82% ee.

Conformational preference determined by inequivalent n-pairs: rotational studies on acetophenone and its monohydrate

Acetophenone and its complex with water have been investigated by using pulsed jet Fourier transform microwave spectroscopy complemented with quantum chemical calculations.

Insight into catalyst speciation and hydrogen co-evolution during enantioselective formic acid-driven transfer hydrogenation with bifunctional ruthenium complexes from multi-technique operando reaction monitoring

Operando spectroscopy shows a transition from dehydrogenation to hydrogen transfer during the reaction, and allows measuring optimal conditions for maximum rate and efficiency.

Hydrogen Transfer Reactions of Carbonyls, Alkynes, and Alkenes with Noble Metals in the Presence of Alcohols/Ethers and Amines as Hydrogen Donors

Hydrogen transfer reactions have exceptional importance, due to their applicability in numerous synthetic pathways, with academic as well as industrial relevance. The most important transformations are, e.g., reduction, ring-closing, stereoselective reactions, and the synthesis of heterocycles. The present review provides insights into the hydrogen transfer reactions in the condensed phase in the presence of noble metals (Rh, Ru, Pd) as catalysts. Since the H-donor molecules (such as alcohols/ethers and amines (1°, 2°, 3°)) and the acceptor molecules (alkenes (C=C), alkynes (C≡C), and carbonyl (C=O) compounds) play a crucial role from mechanistic viewpoints, the present summary points out the key mechanistic differences with the interpretation of current contributions and the corresponding historical achievements as well.

One-pot synthesis of chiral alcohols from alkynes by CF3SO3H/ruthenium tandem catalysis

A practical one-pot synthesis of chiral alcohols from readily available alkynes via tandem catalysis by the combination of CF₃SO₃H and a fluorinated chiral diamine Ru(ii) complex in aqueous CF₃CH₂OH is described. Very interestingly, the combination of fluorinated catalysts and solvent exhibits a positive fluorine effect on the reactivity and enantioselectivity. A range of chiral alcohols with wide functional group tolerance was obtained in high yield and excellent stereoselectivity under simple and mild conditions.

A simple and compatible catalytic system for one-pot transformation of alkynes into chiral alcohols was developed.

Ru-Catalyzed asymmetric transfer hydrogenation of substituted dibenzo[b,f][1,4]oxazepines in water

A phosphine free, additive free catalytic ATH protocol of dibenzo[b,f][1,4]oxazepine compounds using an (R,R)-Ru-Ts-DPEN complex was developed for the first time using HCOOH–HCOONa as a green hydrogen source.

A new cost-effective Ru-chloramphenicol base derivative catalyst for the asymmetric transfer hydrogenation/dynamic kinetic resolution of N-Boc α-amino-β-ketoesters and its application to the synthesis of the chiral core of vancomycin

Herein we describe the application of Ru-chloramphenicol base complexes catalyzed highly diastereo- and enantioselective transfer hydrogenation of N-Boc α-amino-β-ketoesters for the asymmetric synthesis of anti-N-Boc-β-hydroxy-α-amino esters.

Aqueous biphasic iron-catalyzed asymmetric transfer hydrogenation of aromatic ketones

For the first time, an iron(ii) catalyst is used in the biphasic asymmetric transfer hydrogenation (ATH) of ketones to enantioenriched alcohols employing water and potassium formate as the proton and hydride source, respectively.

Asymmetric Transfer Hydrogenation of Imines in Water by Varying the Ratio of Formic Acid to Triethylamine

Asymmetric transfer hydrogenation (ATH) of imines has been performed with variation in formic acid (F) and triethylamine (T) molar ratios in water. The F/T ratio is shown to affect both the reduction rate and enantioselectivity, with the optimum ratio being 1.1 in the ATH of imines with the Rh-(1S,2S)-TsDPEN catalyst. Use of methanol as a cosolvent enhanced reduction activity. A variety of imine substrates have been reduced, affording high yields (94-98%) and good to excellent enantioselectivities (89-98%). In comparison with the common azeotropic F-T system, the reduction with 1.1/1 F/T is faster.