Montmorillonite-entrapped sub-nanoordered Pd clusters as a heterogeneous catalyst for allylic substitution reactions

Fixing CO2 under Atmospheric Conditions and Dual Functional Heterogeneous Catalysis Employing Cu MOFs: Polymorphism, Single-Crystal-to-Single-Crystal (SCSC) Transformation and Magnetic Studies

New copper compounds, [Cu(C14H8O6)(C10H8N2)(H2O)] (1), [Cu(C14H8O6)(C10H8N2)(H2O)]·(C3H7ON)2 (2), [Cu(C14H8O6)(C10H8N2)(H2O)2]·(C3H7ON) (3), [Cu(C14H8O6)(C10H8N4)] (4), and [Cu(C14H8O6)(C10H8N4)]·(H2O) (5), were prepared employing 2,5-bis(prop-2-yn-1-yloxy)terephthalic acid (2,5-BPTA) as the primary ligand and 4,4'-bipyridine (1-3) and 4,4'-azopyridine (4-5) as the secondary ligands. Single-crystal studies indicated that compounds 1-4 have two-dimensional layer structures and compound 5 has a three-dimensional structure. Compounds 1-3 were isolated from the same reaction mixture but by varying the time of reaction. The framework structures of compounds 1-3 are similar and may be considered as polymorphic structures. Compounds 4 and 5 can also be considered polymorphic with a change in dimensionality of the structure. Compounds 1-3 can be formed through a single-crystal-to-single-crystal transformation under a suitable solvent mixture. The Cu center was explored for the Lewis acid-catalyzed cycloaddition reaction of epoxide and CO2 under ambient conditions in a solventless condition and also for the synthesis of propargylamine derivatives by three-component coupling reactions (A3 coupling) in a DCM medium. The Lewis basic functionality of the MOF (-N═N- group) has been explored for the Henry reaction (aldol condensation) in a solventless condition. In all of the catalytic reactions, good yields and recyclability were observed. The magnetic studies indicated that compounds 1 and 4 have antiferromagnetic interactions and compound 5 has ferromagnetic interactions. The present studies illustrated the rich diversity that the copper-containing compounds exhibit in extended framework structures.

Montmorillonite-based Heterogeneous Catalysts for Efficient Organic Reactions

In this review, we give a brief overview of recently developed montmorillonite-based heterogeneous catalysts used for efficient organic reactions. Cation-exchanged montmorillonite catalysts, metal catalysts supported on montmorillonite, and an interlayer design used for selective catalysis are introduced and discussed. In traditional syntheses, homogeneous acids and metal salts were used as catalysts, but the difficulty in separation of catalysts from products was a bottleneck when considering industrialization. The use of solid heterogeneous catalysts is one of the major solutions to overcome this problem. Montmorillonite can be used as a heterogeneous catalyst and/or catalyst support. This clay material exhibits strong acidity and a stabilizing effect on active species, such as metal nanoparticles, due to its unique layered structure. These advantages have led to the development of montmorillonite-based heterogeneous catalysts. Acidic montmorillonite, such as proton-exchanged montmorillonite, exhibits a high catalytic activity for the activation of electrophiles, such as alcohols, alkenes, and even alkanes. The montmorillonite interlayer/surface also functions as a good support for various metal species used for oxidation and carbon-carbon bond forming reactions. The use of an interlayer structure enables selective reactions and the stabilization of catalytically active species.

Heterogeneous Supported Palladium Catalysts for Liquid-Phase Allylation of Nucleophiles

In recent years, palladium-catalyzed allylation has become the focus of much research. However, conventional homogeneous Pd catalysts face problems regarding their recovery, reuse, and cost, especially with respect to green chemistry principles. Herein, we present an overview of the development of catalytic allylation with various heterogeneous Pd catalysts, because they can be easily and conveniently recovered and reused. We also emphasize the use of different solid supports such as polymers, silica, and other hybrid supports to inspire future research in this promising field. Moreover, the unique effects of support surfaces for enhancing catalysis by immobilized heterogeneous Pd species are introduced.

Highly Efficient Cleavage of Ether Bonds in Lignin Models by Transfer Hydrogenolysis over Dual-Functional Ruthenium/Montmorillonite

Cleavage of ether bonds is a crucial but challenging step for lignin valorization. To efficiently realize this transformation, the development of robust catalysts or catalytic systems is required. In this study, montmorillonite (MMT)-supported Ru (denoted as Ru/MMT) is fabricated as a dual-functional heterogeneous catalyst to cleave various types of ether bonds through transfer hydrogenolysis without using any additional acids or bases. The prepared Ru/MMT material is found to efficiently catalyze the cleavage of various lignin models and lignin-derived phenols; cyclohexanes (fuels) and cyclohexanols (key intermediates) are the main products. The synergistic effect between electron-enriched Ru and the acidic sites on MMT contributes to the excellent performance of Ru/MMT. Systematic studies reveal that the reaction proceeds through two possible reaction pathways, including the direct cleavage of ether bonds and the formation of intermediates with one hydrogenated benzene ring, for all examined types of ether bonds, namely, 4-O-5, α-O-4, and β-O-4.

Polyvinylpyridine-Supported Palladium Nanoparticles: An Efficient Catalyst for Suzuki–Miyaura Coupling Reactions

Palladium nanoparticles (Pd NPs) synthesized by the metal vapor synthesis technique were supported on poly(4-vinylpyridine) 2% cross-linked with divinylbenzene (Pd/PVPy). Transmission electron microscopy revealed the presence of small metal nanoparticles (dm = 2.9 nm) highly dispersed on the PVPy. The Pd/PVPy system showed high catalytic efficiency in Suzuki-Miyaura carbon–carbon coupling reactions of both non-activated and deactivated aromatic iodides and bromides with aryl boronic acids, carried out under an air atmosphere. The high turnover of the catalyst and the ability of the PVPy resin to retain active Pd species are highlighted. By comparing the catalytic performances of Pd/PVPy with those observed by using commercially available Pd-based supported catalysts, the reported system showed higher selectivity and lower Pd leaching.

Heterogeneous Catalytic Composites from Palladium Nanoparticles in Montmorillonite Intercalated with Poly (Vinyl Pyrrolidone) Chains

In this study, poly (vinyl pyrrolidone) (PVP) chains intercalated montmorillonite (MMT) matrices has been demonstrated as an excellent scaffolding material for the immobilization of palladium (Pd) nanoparticles to prepare efficient heterogeneous catalysts for Heck reactions. Multiple layers (up to four) of PVP chains can intercalate the interlayer space of the MMT, resulting in an increase therein from 1.25 to 3.22 nm. MMT/PVP with PVP loading (20%) was selected as the platform for the immobilization of Pd. The in-situ reduction of the chelated Pd²⁺ into Pd⁰ in the interlayer space of MMT/PVP composite could be easily achieved. For the prepared Pd@MMT/PVP catalytic composite, a unique maze-like microstructure of Pd nanoparticles tightly encaged by PVP chains and by lamellae of layered silica has been detected by high resolution transmission electron microscopy (HR-TEM) and X-ray diffraction (XRD). Furthermore, the microstructure is well elucidated in molecular level by positron annihilation lifetime analysis of the Pd@MMT/PVP catalytic composite. The prepared Pd@MMT/PVP catalysts were highly active for the Heck coupling reactions between aromatic halides and alkenes, and could be recycled 9 times without significant decreases in coupling yields. The excellent comprehensive catalytic performances of the Pd@MMT/PVP catalytic composites are mainly attributed to their unique maze-like microstructure.

Highly efficient Tsuji–Trost allylation in water catalyzed by Pd-nanoparticles

Palladium nanoparticles stabilized by poly(vinylpyrrolidone) catalyze Tsuji–Trost allylations in water with very high turnover numbers.

Highly selective palladium-benzothiazole carbene-catalyzed allylation of active methylene compounds under neutral conditions

The Pd–benzothiazol-2-ylidene complex I was found to be a chemoselective catalyst for the Tsuji–Trost allylation of active methylene compounds carried out under neutral conditions and using carbonates as allylating agents. The proposed protocol consists in a simplified procedure adopting an in situ prepared catalyst from Pd₂dba₃ and 3-methylbenzothiazolium salt V as precursors. A comparison of the performance of benzothiazole carbene with phosphanes and an analogous imidazolium carbene ligand is also proposed.

Metal nanoparticles as efficient catalysts for organic reactions

Pd(0) nanoparticles have been demonstrated to be very efficient catalysts for C–C bond-forming reactions. These include coupling of vicinal-diiodoalkenes and acrylic esters and nitriles leading to the stereoselective synthesis of 2-alkene-4-yn-esters and nitriles, allylation of active methylene compounds by allyl acetate, and Hiyama cross-coupling of aryliodides with arylsilanes. Cu(0) nanoparticles catalyze aryl-sulfur bond formation, accomplishing the synthesis of functionalized aryl sulfides and aryl- and vinyl dithiocarbamates. Cu nanoparticles have also been used for the chemoselective reduction of aromatic nitro compounds.

Preparation of stable exfoliated Pt-clay nanocatalyst

In this paper, we report a novel experimental protocol for the preparation of stable and exfoliated nano-Pt catalysts supported on layered silicate clay surfaces. Uniformly dispersed highly crystalline Pt nanoparticles with diameters between 2 and 5 nm were chemically adsorbed on to the layered silicate surfaces using a chemical vapor deposition (CVD) method employing organoclay as the initial support. The as-prepared catalysts were found to be extremely stable against both intensive mechanical agitation and high temperature treatment. No Pt loading or morphology changes were observed after ultrasonication under a sonication power density of 6 MW/m(3) for up to 72 h at room temperature or annealing at 700 degrees C for 1 h under Ar flow. On the other hand, Pt catalysts prepared using the inorganic clay as the initial support were found to be highly unstable against both mechanical agitation and high temperature treatment. Significant leaching and catalyst restructuring or sintering was observed. Exfoliation of catalysts and the nature of Pt adsorption were elucidated by systematic analysis using wide-angle X-ray diffraction (WAXD) analysis, Brunauer-Emmett-Teller (BET) surface area analysis, and time-of-flight secondary ion mass spectroscopy (ToF-SIMS) analysis. No low angle diffraction peak was observed in the WAXD pattern, and a 700% increase in BET surface area was observed after Pt deposition on clay surfaces. Depth profiling ToF-SIMS on Pt deposited on SiO(2) wafer surfaces showed the presence of PtSiO ion at the Pt and SiO(2) interface. This ion group was also detected in the bulk of Pt-OrC catalyst, confirming chemisorption of Pt on layered silicate clays. A much lower concentration of PtSiO ion was observed in the Pt-NaC with a similar Pt loading. In addition, X-ray photoelectron spectroscopy (XPS) shows that the binding energy of Pt4f(7/2) in Pt-OrC is much higher than that in the Pt-NaC. The protocol reported in this paper can also be applicable to other clay supported stable metallic catalysts.