Reactions of Olefins with Ruthenium Hydride Nanoparticles: NMR Characterization, Hydride Titration, and Room-Temperature CC Bond Activation

Evidence for Ruthenium(II) Peralkene Complexes as Catalytic Species during the Isomerization of Terminal Alkenes in Solution

The isomerization (chain-walking) reaction of terminal to internal alkenes is catalyzed by part-per-million amounts of practically any Ru source when the reaction is carried out with a neat terminal alkene. Here, we provide evidence that the soluble starting Ru sources evolve to catalytically active peralkene Ru(II) species under reaction conditions. These species may also explain the isomerization products found during other Ru-catalyzed alkene processes, i.e., alkene metathesis reactions. A Finke-Watzky mechanism for catalyst formation is consistent with the evidence obtained.

Highly Enantioselective Binaphthyl-Based Chiral Phosphoramidite Stabilized-Palladium Nanoparticles for Asymmetric Suzuki C-C Coupling Reactions

The optically pure binaphthyl-based phosphoramidite ligands and their perfluorinated analogs have been first used for the preparation of chiral palladium nanoparticles (PdNPs). These PdNPs have been extensively characterized by X-ray diffraction, X-ray photoelectron spectroscopy, transmission electron microscopy, ³¹P NMR, and thermogravimetric analysis techniques. The circular dichroism(CD) analysis of chiral PdNPs exhibited negative cotton effects. Perfluorinated phosphoramidite ligands provided smaller (2.32-3.45 nm) and well-defined nanoparticles, in comparison with the nonfluorinated analog (4.12 nm). The catalytic behavior of binaphthyl-based phosphoramidite stabilized chiral PdNPs has been investigated in the asymmetric Suzuki C-C coupling reactions for the formation of sterically hindered binaphthalene units, and high isolated yields (up to 85%) were achieved with excellent enantiomeric excesses (>99% ee). Recycling studies revealed that chiral PdNPs could be reused over 12 times without significant loss in activity and enantioselectivity (>99% ee). The nature of the active species was also investigated with a combination of poisoning and hot filtration tests and found that catalytically active species is the heterogeneous nanoparticles. These results indicate that the use of phosphoramidite ligands as a stabilizer for developing efficient and unique chiral nanoparticles could open up a field for many other asymmetric organic transformations promoted by chiral catalysts.

Bringing Selectivity in H/D Exchange Reactions Catalyzed by Metal Nanoparticles through Modulation of the Metal and the Ligand Shell

Ru and Rh nanoparticles catalyze the selective H/D exchange in phosphines using D₂ as the deuterium source. The position of the deuterium incorporation is determined by the structure of the P-based substrates, while activity depends on the nature of the metal, the properties of the stabilizing agents, and the type of the substituent on phosphorus. The appropriate catalyst can thus be selected either for the exclusive H/D exchange in aromatic rings or also for alkyl substituents. The selectivity observed in each case provides relevant information on the coordination mode of the ligand. Density functional theory calculations provide insights into the H/D exchange mechanism and reveal a strong influence of the phosphine structure on the selectivity. The isotope exchange proceeds via C-H bond activation at nanoparticle edges. Phosphines with strong coordination through the phosphorus atom such as PPh₃ or PPh₂Me show preferred deuteration at ortho positions of aromatic rings and at the methyl substituents. This selectivity is observed because the corresponding C-H moieties can interact with the nanoparticle surface while the phosphine is P-coordinated, and the C-H activation results in stable metallacyclic intermediates. For weakly coordinating phosphines such as P(o-tolyl)₃, the interaction with the nanoparticle can occur directly through phosphine substituents, and then, other deuteration patterns are observed.

In Situ Ruthenium Catalyst Modification for the Conversion of Furfural to 1,2-Pentanediol

Exploiting biomass to synthesise compounds that may replace fossil-based ones is of high interest in order to reduce dependence on non-renewable resources. 1,2-pentanediol and 1,5-pentanediol can be produced from furfural, furfuryl alcohol or tetrahydrofurfuryl alcohol following a metal catalysed hydrogenation/C-O cleavage procedure. Colloidal ruthenium nanoparticles stabilized with polyvinylpyrrolidone in situ modified with different organic compounds are able to produce 1,2-pentanediol directly from furfural in a 36% of selectivity at 125 °C under 20 bar of H₂ pressure.

Functionalization of graphene oxide with a hybrid P, N ligand for immobilizing and stabilizing economical and non-toxic nanosized CuO: an efficient, robust and reusable catalyst for the C–O coupling reaction in O-arylation of phenol

A new graphene oxide based heterogeneous catalytic system holding CuO nanoparticles through P and N donor sites for the C–O coupling reaction.

A combined theoretical/experimental study highlighting the formation of carbides on Ru nanoparticles during CO hydrogenation

Formation of stable carbides during CO bond dissociation on small ruthenium nanoparticles (RuNPs) is demonstrated, both by means of DFT calculations and by solid state ¹³C NMR techniques. Theoretical calculations of chemical shifts in several model clusters are employed in order to secure experimental spectroscopic assignations for surface ruthenium carbides. Mechanistic DFT investigations, carried out on a realistic Ru₅₅ nanoparticle model (∼1 nm) in terms of size, structure and surface composition, reveal that ruthenium carbides are obtained during CO hydrogenation. Calculations also indicate that carbide formation via hydrogen-assisted hydroxymethylidyne (COH) pathways is exothermic and occurs at reasonable kinetic cost on standard sites of the RuNPs, such as 4-fold ones on flat terraces, and not only in steps as previously suggested. Another novel outcome of the DFT mechanistic study consists of the possible formation of μ₆ ruthenium carbides in the tip-B₅ site, similar examples being known only for molecular ruthenium clusters. Moreover, based on DFT energies, the possible rearrangement of the surface metal atoms around the same tip-site results in a μ-Ru atom coordinated to the remaining RuNP moiety, reminiscent of a pseudo-octahedral metal center on the NP surface.

Low-temperature hydrogen production from methanol over a ruthenium catalyst in water

Efficient conversion of methanol to hydrogen gas and formate with an appreciably high TOF and TON is achieved over the in situ generated ruthenium catalyst in water at low temperature.

Surface reactions of ammonia on ruthenium nanoparticles revealed by 15N and 13C solid-state NMR

Ruthenium nanoparticles (Ru NPs) stabilized by bis-diphenylphosphinobutane (dppb) and surface-saturated with hydrogen have been exposed to gaseous ¹⁵NH₃ and ¹³CO and studied using solid-state NMR and DFT calculations.

Nitrene-functionalized ruthenium nanoparticles: Spectral evidence for the conjugated ruthenium-nitrene π bonds and the impact on the catalytic activity

In this manuscript, ruthenium (Ru) nanoparticles functionalized with nitrene ligands through the ruthenium-nitrene (RuN) π bonds are explored. By synthesizing the nitrene ligands with and without ¹⁵N-labelling, RuN π bonds on Ru nanoparticles are evidenced by experimental and theoretically calculated FTIR spectra. The coordination of nitrene ligands on Ru nanoparticles surface, the interfacial charge delocalization and the impact of nitrene ligands on the catalytic performance of Ru nanoparticles are further characterized by magic-angle spinning solid-state carbon nuclear magnetic resonance spectroscopy (¹³C NMR) of ¹³CO-adsorbed Ru nanoparticles, photoluminescence and the hydrogenation of styrene.

Organometallic Nanoparticles Ligated by NHCs: Synthesis, Surface Chemistry and Ligand Effects

Over the last 20 years, the use of metallic nanoparticles (MNPs) in catalysis has awakened a great interest in the scientific community, mainly due to the many advantages of this kind of nanostructures in catalytic applications. MNPs exhibit the characteristic stability of heterogeneous catalysts, but with a higher active surface area than conventional metallic materials. However, despite their higher activity, MNPs present a wide variety of active sites, which makes it difficult to control their selectivity in catalytic processes. An efficient way to modulate the activity/selectivity of MNPs is the use of coordinating ligands, which transforms the MNP surface, subsequently modifying the nanoparticle catalytic properties. In relation to this, the use of N-heterocyclic carbenes (NHC) as stabilizing ligands has demonstrated to be an effective tool to modify the size, stability, solubility and catalytic reactivity of MNPs. Although NHC-stabilized MNPs can be prepared by different synthetic methods, this review is centered on those prepared by an organometallic approach. Here, an organometallic precursor is decomposed under H2 in the presence of non-stoichiometric amounts of the corresponding NHC-ligand. The resulting organometallic nanoparticles present a clean surface, which makes them perfect candidates for catalytic applications and surface studies. In short, this revision study emphasizes the great versatility of NHC ligands as MNP stabilizers, as well as their influence on catalysis.

When organophosphorus ruthenium complexes covalently bind to ruthenium nanoparticles to form nanoscale hybrid materials

A hybrid material made of mononuclear organophosphorus polypyridyl ruthenium complexes covalently bonded to ruthenium nanoparticles has been synthesized via a one-pot organometallic procedure and finely characterized. These results open new avenues to access unique hybrid transition metal nanomaterials.

Catalysis to discriminate single atoms from subnanometric ruthenium particles in ultra-high loading catalysts

We report a procedure for preparing ultra-high metal loading (10–50% w/w Ru) Ru@C₆₀ nanostructured catalysts comprising exclusively Ru single atoms or mixtures of single atoms and clusters.

σ-H-H, σ-C-H, and σ-Si-H Bond Activation Catalyzed by Metal Nanoparticles

Activation of H-H, Si-H, and C-H bonds through σ-bond coordination has grown in the past 30 years from a scientific curiosity to an important tool in the functionalization of hydrocarbons. Several mechanisms were discovered via which the initially σ-bonded substrate could be converted: oxidative addition, heterolytic cleavage, σ-bond metathesis, electrophilic attack, etc. The use of metal nanoparticles (NPs) in this area is a more recent development, but obviously nanoparticles offer a much richer basis than classical homogeneous and heterogeneous catalysts for tuning reactivity for such a demanding process as C-H functionalization. Here, we will review the surface chemistry of nanoparticles and catalytic reactions occurring in the liquid phase, catalyzed by either colloidal or supported metal NPs. We consider nanoparticles prepared in solution, which are stabilized and tuned by polymers, ligands, and supports. The question we have addressed concerns the differences and similarities between molecular complexes and metal NPs in their reactivity toward σ-bond activation and functionalization.

Carboxylic acid-capped ruthenium nanoparticles: experimental and theoretical case study with ethanoic acid

Given that the properties of metal nanoparticles (NPs) depend on several parameters (namely, morphology, size, surface composition, crystalline structure, etc.), a computational model that brings a better understanding of a structure-property relationship at the nanoscale is a significant plus in order to explain the surface properties of metal NPs and also their catalytic viability, in particular, when envisaging a new stabilizing agent. In this study we combined experimental and theoretical tools to obtain a mapping of the surface of ruthenium NPs stabilized by ethanoic acid as a new capping ligand. For this purpose, the organometallic approach was applied as the synthesis method. The morphology and crystalline structure of the obtained particles was characterized by state-of-the art techniques (TEM, HRTEM, WAXS) and their surface composition was determined by various techniques (solution and solid-state NMR, IR, chemical titration, DFT calculations). DFT calculations of the vibrational features of model NPs and of the chemical shifts of model clusters allowed us to secure the spectroscopic experimental assignations. Spectroscopic data as well as DFT mechanistic studies showed that ethanoic acid lies on the metal surface as ethanoate, together with hydrogen atoms. The optimal surface composition determined by DFT calculations appeared to be ca. [0.4-0.6] H/Rusurf and 0.4 ethanoate/RuSurf, which was corroborated by experimental results. Moreover, for such a composition, a hydrogen adsorption Gibbs free energy in the range -2.0 to -3.0 kcal mol-1 was calculated, which makes these ruthenium NPs a promising nanocatalyst for the hydrogen evolution reaction in the electrolysis of water.

Size and shape-controlled synthesis of Ru nanocrystals

Mastery over the size/shape of nanocrystals (NCs) enables control of their properties and enhancement of their usefulness for a given application. Within the past decades, the development of wet-chemistry methods leads to the blossom of research in noble metal nanomaterials with tunable sizes and shapes. We herein would prefer to devote this chapter to introduce the solution-based methods for size and shape-controlled synthesis of ruthenium (Ru) NCs, which can be summarized into five categories: (i) Synthesis of spherical Ru NCs; (ii) synthesis of one-dimensional (1D) Ru NCs, e.g. wires and rods; (iii) synthesis of two-dimensional (2D) Ru NCs, e.g. nanoplates; (iv) synthesis of Ru NCs with hollow interiors and (v) synthesis of Ru NCs with other morphologies, e.g. chains, dendrites and branches. We aim at highlighting the synthetic approaches and growth mechanisms of these types of Ru NCs. We also introduce the detailed characterization tools for analysis of Ru NCs with different sizes/shapes. With respect to the creation of great opportunities and tremendous challenges due to the accumulation in noble metal nanomaterials, we briefly make some perspectives for the future development of Ru NCs so as to provide the readers a systematic and coherent picture of this promising field. We hope this reviewing effort can provide for technical bases for effectively designing and producing Ru NCs with enhanced physical/chemical properties.

Graphical Abstract:

Magnetic, Structural, and Chemical Properties of Cobalt Nanoparticles Synthesized in Ionic Liquids

Cobalt nanoparticles (CoNPs) exhibit quite unique magnetic, catalytic, and optical properties. In this work, imidazolium-based ionic liquids (ILs) are successfully used to elaborate magnetically responsive suspensions of quite monodisperse CoNPs with diameters below 5 nm. The as-synthesized CoNPs adopt the noncompact and metastable structure of ϵ-Co that progressively evolves at room temperature toward the stable hexagonal close-packed allotrope of Co. Accordingly, magnetization curves are consistent with zero-valent Co. As expected in this size range, the CoNPs are superparamagnetic at room temperature. Their blocking temperature is found to depend on the size of the IL cation. The CoNPs produced in an IL with a large cation exhibit a very high anisotropy, attributed to an enhanced dipolar coupling of the NPs, even though a larger interparticle distance is observed in this IL. Finally, the presence of surface hydrides on the CoNPs is assessed and paves the way toward the synthesis for Co-based bimetallic NPs.

Organometallic Ruthenium Nanoparticles: Synthesis, Surface Chemistry, and Insights into Ligand Coordination

Although there has been for the past 20 years great interest in the synthesis and use of metal nanoparticles, little attention has been paid to the complexity of the surface of these species. In particular, the different aspects concerning the ligands present, their location, their mode of binding, and their dynamics have been little studied. Our group has started in the early 1990s an investigation of the surface coordination chemistry of ruthenium and platinum nanoparticles but at that time with a lack of adequate techniques to fulfill our ambition. Over 10 years later, we went back to this problem and could obtain a more precise vision of the surface species. This Account is centered on ruthenium chemistry. This metal has been the most studied in our group, first thanks to the availability of a precursor, Ru(cyclooctadiene)(cyclooctatriene) (Ru(COD)(COT)), which possesses the ability to decompose in very mild conditions without leaving residues on the resulting nanoparticles and second because of the absence of magnetic perturbations (Knight shift, paramagnetism, ferromagnetism, etc.), which has allowed the use of solution and solid state NMR. In this respect, it has been possible to evidence the presence of a high concentration of hydrides on the surface of these particles, to study their dynamics, and to show that since the polarity of the Ru-H bond is similar to that of the C-H bond, a Ru/H NP would behave as a big lipophilic entity. The second point was to characterize the coordination of ancillary ligands. This has been achieved for different ligands, in particular phosphines and carbenes, which made possible the study of the modification of NP reactivity induced by surface ligands. This led to the conclusion that the presence of surface ligands can benefit both the activity of NP catalysts and their selectivity. If it was expected that the selectivity could be modulated, the promoting effect from the presence of ligands on, for example, arene or CO hydrogenation was totally unexpected. Playing with poison atoms (Sn, Fe, etc.) or ligands (CO) may allow us to play with the reactivity of the NPs to make them more selective for selected reactions. Finally, the search for specific ligands for nanoparticles is still in its infancy, but some examples have been found as have specific reactions of nanoparticles. Obviously arene hydrogenation and CO hydrogenation were well-known in heterogeneous catalysis, but we could demonstrate that they can be carried out in very mild conditions on ligand stabilized RuNPs. On the other hand, the enantiospecific C-H activation leading to enantioselective labeling of large organic or biomolecules or the C-C bond cleavage in mild conditions were both unexpected. There is still much work to perform for reaching the degree of control on nanoparticles that is presently achieved in organometallic molecular chemistry, but this work shows that it is possible.

Gas phase 1H NMR studies and kinetic modeling of dihydrogen isotope equilibration catalyzed by Ru-nanoparticles under normal conditions: dissociative vs. associative exchange

Exposure of surface H-containing Ru-nanoparticles to D₂ gas produces HD via associative adsorption, surface H-transfer and associative desorption.

The role and fate of capping ligands in colloidally prepared metal nanoparticle catalysts

In this Perspective article, we highlight emerging opportunities for the rational design of catalysts upon the choice, exchange, partial removal or pyrolysis of ligands.

A new approach for the preparation of well-defined Rh and Pt nanoparticles stabilized by phosphine-functionalized silica for selective hydrogenation reactions

In this work, a new methodology for the synthesis of well-defined metallic nanoparticles supported on silica is described. This methodology is based on the surface control provided by SOMC. The nanoparticles are formed via the organometallic approach and are catalytically active in the hydrogenation of p-xylene, 3-hexyne, 4-phenyl-2 butanone, benzaldehyde, and furfural.

Shape, electronic structure and steric effects of organometallic nanocatalysts: relevant tools to improve the synergy between theory and experiment

An integrated package that uses structural, first principles and thermodynamic approaches is expected to play a significant role in advancing our knowledge of nanocatalysts.

Theoretical characterization of the surface composition of ruthenium nanoparticles in equilibrium with syngas

A deeper understanding of the relationship between experimental reaction conditions and the surface composition of nanoparticles is crucial in order to elucidate mechanisms involved in nanocatalysis. In the framework of the Fischer-Tropsch synthesis, a resolution of this complex puzzle requires a detailed understanding of the interaction of CO and H with the surface of the catalyst. In this context, the single- and co-adsorption of CO and H to the surface of a 1 nm ruthenium nanoparticle has been investigated with density functional theory. Using several indexes (d-band center, crystal overlap Hamilton population, density of states), a systematic analysis of the bond properties and of the electronic states has also been done, in order to bring an understanding of structure/property relationships at the nanoscale. The H : CO surface composition of this ruthenium nanoparticle exposed to syngas has been evaluated according to a thermodynamic model fed with DFT energies. Such ab initio thermodynamic calculations give access to the optimal H : CO coverage values under a wide range of experimental conditions, through the construction of free energy phase diagrams. Surprisingly, under the Fischer-Tropsch synthesis experimental conditions, and in agreement with new experiments, only CO species are adsorbed at the surface of the nanoparticle. These findings shed new light on the possible reaction pathways underlying the Fischer-Tropsch synthesis, and specifically the initiation of the reaction. It is finally shown that the joint knowledge of the surface composition and energy descriptors can help to identify possible reaction intermediates.

Enantioselective hydrogenation of ketones by iridium nanoparticles ligated with chiral secondary phosphine oxides

Chiral iridium nanoparticles (IrNPs) were synthesized by H₂reduction of (1,5-cyclooctadiene)(methoxy)iridium(i) dimer ([Ir(OMe)(COD)]₂) in the presence of an asymmetric secondary phosphine oxide.

Parahydrogen enhanced NMR reveals correlations in selective hydrogenation of triple bonds over supported Pt catalyst

Parahydrogen induced polarization using heterogeneous catalysis can produce impurity-free hyperpolarized gases and liquids, but the comparatively low signal enhancements and limited scope of substrates that can be polarized pose significant challenges to this approach. This study explores the surface processes affecting the disposition of the bilinear spin order derived from parahydrogen in the hydrogenation of propyne over TiO2-supported Pt nanoparticles. The hyperpolarized adducts formed at low magnetic field are adiabatically transported to high field for analysis by proton NMR spectroscopy at 400 MHz. For the first time, the stereoselectivity of pairwise addition to propyne is measured as a function of reaction conditions. The correlation between partial reduction selectivity and stereoselectivity of pairwise addition is revealed. The systematic trends are rationalized in terms of a hybrid mechanism incorporating non-traditional concerted addition steps and well-established reversible step-wise addition involving the formation of a surface bound 2-propyl intermediate.

Benzene partial hydrogenation: advances and perspectives

The partial hydrogenation of benzene to cyclohexene is an economically interesting and technically challenging reaction. Over the last four decades, a lot of work has been dedicated to the development of an exploitable process and several approaches have been investigated. However, environmental constraints often represent a limit to their industrial application, making further research in this field necessary. The goal of this review is to highlight the main findings of the different disciplines involved in understanding the governing principles of this reaction from a sustainable chemistry standpoint. Special emphasis is given to ruthenium-catalyzed liquid phase batch hydrogenation of benzene.

Palladium metal nanoparticles stabilized by ionophilic ligands in ionic liquids: synthesis and application in hydrogenation reactions

The selectivity of the hydrogenation of 1,3-cyclohexadiene and 2-pentyne by Pd nanoparticles in an ionic liquid can be modulated by the addition of N- or P-containing ionophilic ligands.

Surface characterisation of phosphine and phosphite stabilised Rh nanoparticles: a model study

The surface characterisation of Rh nanoparticles stabilized by triphenylphosphine and triphenylphosphite shows differences that were correlated with distinct selectivities in catalytic styrene hydrogenation.

A betaine adduct of N-heterocyclic carbene and carbodiimide, an efficient ligand to produce ultra-small ruthenium nanoparticles

A betaine adduct (ICy·^(p-tol)NCN) as an efficient ligand to prepare ultra-small (1–1.3 nm) ruthenium nanoparticles (RuNPs).

Tin-decorated ruthenium nanoparticles: a way to tune selectivity in hydrogenation reaction

Two series of ruthenium nanoparticles stabilized either by a polymer (polyvinylpyrrolidone; Ru/PVP) or a ligand (bisdiphenylphosphinobutane; Ru/dppb) were reacted with tributyltin hydride [(n-C4H9)3SnH] leading to tin-decorated ruthenium nanoparticles, Ru/PVP/Sn and Ru/dppb/Sn. The Sn/Ru molar ratio was varied in order to study the influence of the surface tin content on the properties of these new nanoparticles, by comparison with Ru/PVP and Ru/dppb. Besides HRTEM and WAXS analyses, spectroscopic techniques (IR, NMR and Mössbauer) combined with theoretical calculations and a simple catalytic test (styrene hydrogenation) allowed us to evidence the formation of μ(3)-bridging "SnR" groups on the ruthenium surface as well as to rationalize their influence on surface chemistry and catalytic activity.

Recent NMR developments applied to organic-inorganic materials

In this contribution, the latest developments in solid state NMR are presented in the field of organic-inorganic (O/I) materials (or hybrid materials). Such materials involve mineral and organic (including polymeric and biological) components, and can exhibit complex O/I interfaces. Hybrids are currently a major topic of research in nanoscience, and solid state NMR is obviously a pertinent spectroscopic tool of investigation. Its versatility allows the detailed description of the structure and texture of such complex materials. The article is divided in two main parts: in the first one, recent NMR methodological/instrumental developments are presented in connection with hybrid materials. In the second part, an exhaustive overview of the major classes of O/I materials and their NMR characterization is presented.

Probing the surface of platinum nanoparticles with 13CO by solid-state NMR and IR spectroscopies

The synthesis and full characterization of platinum nanoparticles (Pt NPs) prepared by decomposition of the Pt(dba)2 complex in the presence of CO and H2 and stabilized either sterically by a polymer, polyvinylpyrrolidone or chemically by a ligand, diphenylphosphinobutane, are reported. In these studies, (13)CO was used as a probe molecule to investigate the surface of the particles, using IR and solid-state NMR spectroscopies with magic angle spinning (MAS-NMR). Three nanosystems with different sizes are described: Pt/PVP/(13)CO (monomodal: 1.2 nm), Pt/dppb/(13)CO (bimodal: 1.2 nm and 2.0 nm) and Pt/dppb/H2 (monomodal: 2.0 nm) NPs. Spectroscopic data suggest a modification of the electronic state of the nanoparticles between 1.2 nm and 2.0 nm which can be related to the presence of Knight shift.