Oxidation Reactivity of Bis(μ-oxo) Dinickel(III) Complexes: Arene Hydroxylation of the Supporting Ligand

A dinuclear nickel peroxycarbonate complex: CO2 addition promotes H2O2 release

Nickel coordination compounds featuring Ni-O bonds are key structural motifs in both bioinorganic and synthetic chemistries. They serve as precursors for organic substrate oxidation and are commonly invoked intermediates in water oxidation and oxygen reduction schemes. Herein, we disclose a series of well-defined dinuclear nickel complexes that, upon treatment with CO2 and H2O2, afford the first nickel-bound peroxycarbonate. This unprecedented nickel-oxygen intermediate is stabilized by hydrogen bonding templated across the bimetallic core. Contrasting copper and iron analogues, the nickel peroxycarbonate reversibly dissociates H2O2, a process that is shown to be accelerated by exogenous CO2.

DFT Mechanistic Investigation into Ni(II)-Catalyzed Hydroxylation of Benzene to Phenol by H2O2

Introduction of oxygen into aromatic C-H bonds is intriguing from both fundamental and practical perspectives. Although the 3d metal-catalyzed hydroxylation of arenes by H2O2 has been developed by several prominent researchers, a definitive mechanism for these crucial transformations remains elusive. Herein, density functional theory calculations were used to shed light on the mechanism of the established hydroxylation reaction of benzene with H2O2, catalyzed by [NiII(tepa)]2+ (tepa = tris[2-(pyridin-2-yl)ethyl]amine). Dinickel(III) bis(μ-oxo) species have been proposed as the key intermediate responsible for the benzene hydroxylation reaction. Our findings indicate that while the dinickel dioxygen species can be generated as a stable structure, it cannot serve as an active catalyst in this transformation. The calculations allowed us to unveil an unprecedented mechanism composed of six main steps as follows: (i) deprotonation of coordinated H2O2, (ii) oxidative addition, (iii) water elimination, (iv) benzene addition, (v) ketone generation, and (vi) tautomerization and regeneration of the active catalyst. Addition of benzene to oxygen, which occurs via a radical mechanism, turns out to be the rate-determining step in the overall reaction. This study demonstrates the critical role of Ni-oxyl species in such transformations, highlighting how the unpaired spin density value on oxygen and positive charges on the Ni-O• complex affect the activation barrier for benzene addition.

Synthesis and Characterization of a Masked Terminal Nickel-Oxide Complex

In exploring terminal nickel-oxo complexes, postulated to be the active oxidant in natural and non-natural oxidation reactions, we report the synthesis of the pseudo-trigonal bipyramidal NiII complexes (K)[NiII (LPh )(DMF)] (1[DMF]) and (NMe4 )2 [NiII (LPh )(OAc)] (1[OAc]) (LPh =2,2',2''-nitrilo-tris-(N-phenylacetamide); DMF=N,N-dimethylformamide; - OAc=acetate). Both complexes were characterized using NMR, FTIR, ESI-MS, and X-ray crystallography, showing the LPh ligand to bind in a tetradentate fashion, together with an ancillary donor. The reaction of 1[OAc] with peroxyphenyl acetic acid (PPAA) resulted in the formation of [(LPh )NiIII -O-H⋅⋅⋅OAc]2- , 2, that displays many of the characteristics of a terminal Ni=O species. 2 was characterized by UV-Vis, EPR, and XAS spectroscopies and ESI-MS. 2 decayed to yield a NiII -phenolate complex 3 (through aromatic electrophilic substitution) that was characterized by NMR, FTIR, ESI-MS, and X-ray crystallography. 2 was capable of hydroxylation of hydrocarbons and epoxidation of olefins, as well as oxygen atom transfer oxidation of phosphines at exceptional rates. While the oxo-wall remains standing, this complex represents an excellent example of a masked metal-oxide that displays all of the properties expected of the ever elusive terminal M=O beyond the oxo-wall.

Aromatic and aliphatic hydrocarbon hydroxylation via a formally NiIVO oxidant

The reaction of (NMe₄)₂[Ni^II(L^Ph)(OAc)] (1[OAc], L^Ph = 2,2',2''-nitrilo-tris-(N-phenylacetamide); OAc = acetate) with 3-chloroperoxybenzoic acid (m-CPBA) resulted in the formation of a self-hydroxylated Ni^III-phenolate complex, 2, where one of the phenyl groups of L^Ph underwent hydroxylation. 2 was characterised by UV-Vis, EPR, and XAS spectroscopies and ESI-MS. 2 decayed to yield a previously characterised Ni^II-phenolate complex, 3. We postulate that self-hydroxylation was mediated by a formally Ni^IVO oxidant, formed from the reaction of 1[OAc] with m-CPBA, which undergoes electrophilic aromatic substitution to yield 2. This is supported by an analysis of the kinetic and thermodynamic properties of the reaction of 1[OAc] with m-CPBA. Addition of exogenous hydrocarbon substrates intercepted the self-hydroxylation process, producing hydroxylated products, providing further support for the formally Ni^IVO entity. This study demonstrates that the reaction between Ni^II salts and m-CPBA can lead to potent metal-based oxidants, in contrast to recent studies demonstrating carboxyl radical is a radical free-chain reaction initiator in Ni^II/m-CPBA hydrocarbon oxidation catalysis.

Generation and Reactivity of a NiIII2(μ-1,2-peroxo) Complex

High-valent transition metal-oxo, -peroxo, and -superoxo complexes are crucial intermediates in both biological and synthetic oxidation of organic substrates, water oxidation, and oxygen reduction. While high-valent oxygenated complexes of Mn, Fe, Co, and Cu are increasingly well-known, high-valent oxygenated Ni complexes are comparatively rarer. Herein we report the isolation of such an unusual high-valent species in a thermally unstable Ni^III₂(μ-1,2-peroxo) complex, which has been characterized using single-crystal X-ray diffraction and X-ray absorption, NMR, and UV-vis spectroscopies. Reactivity studies show that this complex is stable toward dissociation of oxygen but reacts with simple nucleophiles and electrophiles.

Cu(I) complexes obtained via spontaneous reduction of Cu(II) complexes supported by designed bidentate ligands: bioinspired Cu(I) based catalysts for aromatic hydroxylation

Copper(i) complexes [Cu(L1-7)2](ClO4) (1-7) of bidentate ligands (L1-L7) have been synthesized via spontaneous reduction and characterized as catalysts for aromatic C-H activation using H2O2 as the oxidant. The single crystal X-ray structure of 1 exhibited a distorted tetrahedral geometry. All the copper(i) complexes catalyzed direct hydroxylation of benzene to form phenol with good selectivity up to 98%. The determined kinetic isotope effect (KIE) values, 1.69-1.71, support the involvement of a radical type mechanism. The isotope-labeling experiments using H218O2 showed 92% incorporation of 18O into phenol and confirm that H2O2 is the key oxygen supplier. Overall, the catalytic efficiencies of the complexes are strongly influenced by the electronic and steric factor of the ligand, which is fine-tuned by the ligand architecture. The benzene hydroxylation reaction possibly proceeded via a radical mechanism, which was confirmed by the addition of radical scavengers (TEMPO) to the catalytic reaction that showed a reduction in phenol formation.

A tetranuclear nickel cluster isolated in multiple high-valent states

We report a series of high-valent tetranuclear nickel clusters isolated from the chemical oxidation of an all Ni(ii) ([Ni₄]) neutral cluster. Electrochemical analysis of [Ni₄] reveals three reversible sequential oxidations at 0.248 V (1e^-), 0.678 V (1e^-), and 0.991 V (2e^-) vs. Fc/Fc⁺ corresponding to mono-, di-, and tetra-oxidized species, [Ni₄]⁺, [Ni₄]²⁺, [Ni₄]⁴⁺, respectively. Using spectroscopic, crystallographic, magnetometric, and computational techniques, we assign the primary loci of oxidations to the Ni centers in each case, thus resulting in the isolation of the first tetranuclear all-Ni(iii) cluster, [Ni₄]⁴⁺.

Single-step benzene hydroxylation by cobalt(ii) catalysts via a cobalt(iii)-hydroperoxo intermediate

Cobalt(ii) complexes reported as efficient and selective catalysts for single-step phenol formation from benzene using H₂O₂. The catalysis proceeds likely via cobalt(iii)-hydroperoxo species.

Preparation and Characterisation of a Bis-μ-Hydroxo-NiIII 2 Complex

Hydroxide-bridged high-valent oxidants have been implicated as the active oxidants in methane monooxygenases and other oxidases that employ bimetallic clusters in their active site. To understand the properties of such species, bis-μ-hydroxo-Ni^II ₂ complex (1) supported by a new dicarboxamidate ligand (N,N'-bis(2,6-dimethyl-phenyl)-2,2-dimethylmalonamide) was prepared. Complex 1 contained a diamond core made up of two Ni^II ions and two bridging hydroxide ligands. Titration of the 1 e^- oxidant (NH₄ )₂ [Ce^IV (NO₃ )₆ ] with 1 at -45 °C showed the formation of the high-valent species 2 and 3, containing Ni^II Ni^III and Ni^III ₂ diamond cores, respectively, maintaining the bis-μ-hydroxide core. Both complexes were characterised using electron paramagnetic resonance, X-ray absorption, and electronic absorption spectroscopies. Density functional theory computations supported the spectroscopic assignments. Oxidation reactivity studies showed that bis-μ-hydroxide-Ni^III ₂ 3 was capable of oxidizing substrates at -45 °C at rates greater than that of the most reactive bis-μ-oxo-Ni^III complexes reported to date.

One step phenol synthesis from benzene catalysed by nickel(ii) complexes

Nickel(ii)complexes of N₄-ligands are reported as efficient catalysts for direct benzene hydroxylation via bis(μ-oxo)dinickel(iii) intermediate species. The exclusive phenol formation is achieved with a yield of 41%.

Transient Formation and Reactivity of a High-Valent Nickel(IV) Oxido Complex

A reactive high-valent dinuclear nickel(IV) oxido bridged complex is reported that can be formed at room temperature by reaction of [(L)2Ni(II)2(μ-X)3]X (X = Cl or Br) with NaOCl in methanol or acetonitrile (where L = 1,4,7-trimethyl-1,4,7-triazacyclononane). The unusual Ni(IV) oxido species is stabilized within a dinuclear tris-μ-oxido-bridged structure as [(L)2Ni(IV)2(μ-O)3]2+. Its structure and its reactivity with organic substrates are demonstrated through a combination of UV-vis absorption, resonance Raman, 1H NMR, EPR, and X-ray absorption (near-edge) spectroscopy, ESI mass spectrometry, and DFT methods. The identification of a Ni(IV)-O species opens opportunities to control the reactivity of NaOCl for selective oxidations.

New mechanistic insight into intramolecular arene hydroxylation initiated by (μ-1,2-peroxo)diiron(III) complexes with dinucleating ligands

(μ-1,2-Peroxo)diiron(iii) complexes (-R) with dinucleating ligands (R-L) generated from the reaction of bis(μ-hydroxo)diiron(ii) complexes [Fe2(R-L)(OH)2](2+) (-R) with dioxygen in acetone at -20 °C provide a diiron-centred electrophilic oxidant, presumably diiron(iv)-oxo species, which is involved in aromatic ligand hydroxylation.

Aromatic Methoxylation and Hydroxylation by Organometallic High-Valent Nickel Complexes

Herein we report the synthesis and reactivity of several organometallic Ni(III) complexes stabilized by a modified tetradentate pyridinophane ligand containing one phenyl group. A room temperature stable dicationic Ni(III)-disolvento complex was also isolated, and the presence of two available cis coordination sites in this complex offers an opportunity to probe the C-heteroatom bond formation reactivity of high-valent Ni centers. Interestingly, the Ni(III)-dihydroxide and Ni(III)-dimethoxide species can be synthesized, and they undergo aryl methoxylation and hydroxylation that is favored by addition of oxidant, which also limits the β-hydride elimination side reaction. Overall, these results provide strong evidence for the involvement of high-valent organometallic Ni species, possibly both Ni(III) and Ni(IV) species, in oxidatively induced C-heteroatom bond formation reactions.

Conversion of methane to methanol with a bent mono(μ-oxo)dinickel anchored on the internal surfaces of micropores

The oxidation of methane to methanol is a pathway to utilizing this relatively abundant, inexpensive energy resource. Here we report a new catalyst, bent mono(μ-oxo)dinickel anchored on an internal surface of micropores,which is active for direct oxidation. It is synthesized from the direct loading of a nickel precursor to the internal surface of micropores of ZSM5 following activation in O2. Ni 2p3/2 of this bent mono(μ-oxo)dinickel species formed on the internal surface of ZSM5 exhibits a unique photoemission feature, which distinguishes the mono(μ-oxo)dinickel from NiO nanoparticles. The formation of the mono(μ-oxo)dinickel species was confirmed with X-ray absorption near-edge structure (XANES) and extended X-ray absorption fine structure (EXAFS). This mono(μ-oxo)dinickel species is active for the direct oxidation of methane to methanol under the mild condition of a temperature as low as 150 °C in CH4 at 1 bar. In-situ studies using UV-vis, XANES, and EXAFS suggest that this bent mono(μ-oxo)dinickel species is the active site for the direct oxidation of methane to methanol. The energy barrier of this direct oxidation of methane is 83.2 kJ/mol.

Endogenous arene hydroxylation promoted by copper(I) cluster helicates

A novel neutral triple-stranded hexanuclear copper(I) cluster helicate [Cu(I)(6)L(3)]·2CH(3)CN derived from a thiosemicarbazone ligand could be synthesized and crystallographically characterized. The MALDI mass spectrum of this complex suggests that the tetranuclear copper(I) cluster helicate [Cu(I)(4)L(2)] is also present in solution. These copper(I) cluster helicates are capable, in the presence of O(2), of hydroxylating the arene linker of their supporting ligand strands. The resulting dinuclear complex [Cu(II)(2)L'(OH)] is formed by two copper(II) centers, a new ligand arising from the hydroxylation reaction, and one hydroxide group. The magnetic investigation of this compound shows a strong antiferromagnetic coupling between the two Cu(II) centers. The kinetic studies for the hydroxylation process show values of ΔH(≠)=-70 kJ mol(-1), similar to those mediated by the tyrosinase enzymes.