Propene epoxidation with dioxygen catalyzed by gold clusters

Mechanistic Understanding of Oxygen Activation on Bulk Au(111) Surface Using Tip-Enhanced Raman Spectroscopy

Gaining mechanistic understanding of oxygen activation on metal surfaces is a topical area of research in surface science. However, direct investigation of on-surface oxidation processes at the nanoscale and the empirical validation of oxygen activation pathways remain challenging for the conventional analytical tools. In this study, we applied tip-enhanced Raman spectroscopy (TERS) to gain mechanistic insights into oxygen activation on bulk Au(111) surface. Specifically, oxidation of 4-aminothiophenol (4-ATP) to 4-nitrothiophenol (4-NTP) on Au(111) surface was investigated using hyperspectral TERS imaging. Nanoscale TERS images revealed a markedly higher oxidation efficiency in disordered 4-ATP adlayers compared to the ordered adlayers signifying that the oxidation of 4-ATP molecules proceeds via interaction with the on-surface oxidative species. These results were further validated via direct oxidation of the 4-ATP adlayers with H2O2 solution. Finally, TERS measurements of oxidized 4-ATP adlayers in the presence of H2O18 provided the first empirical evidence for the generation of oxidative species on bulk Au(111) surface via water-mediated activation of molecular oxygen. This study expands our mechanistic understanding of oxidation chemistry on bulk Au surface by elucidating the oxygen activation pathway.

Going for gold - the chemistry of structurally authenticated gold(I)-ethylene complexes

Gold coordination chemistry and catalysis involving unsaturated hydrocarbons such as olefins have experienced a remarkable growth during the last few decades. Despite the importance, isolable and well-characterized molecules with ethylene, the simplest and the most widely produced olefin, on gold are still limited. This review aims to cover features of, and strategies utilized to stabilize, gold-ethylene complexes and their diverse use in chemical transformations and homogeneous catalytic processes. Isolable and well-authenticated gold-ethylene complexes are important not only for structural, spectroscopic, and bonding studies but also as models for likely intermediates in gold mediated reactions of alkenes and gold-alkene species observed in the gas phase. There has also been development on AuI/III catalytic cycles. Nitrogen based ligands have been the most widely utilized ligand supports thus far for the successful stabilization of gold-ethylene adducts. Gold has a bright future in olefin chemistry and with ethylene.

Bimetallic Sites for Catalysis: From Binuclear Metal Sites to Bimetallic Nanoclusters and Nanoparticles

Heterogeneous bimetallic catalysts have broad applications in industrial processes, but achieving a fundamental understanding on the nature of the active sites in bimetallic catalysts at the atomic and molecular level is very challenging due to the structural complexity of the bimetallic catalysts. Comparing the structural features and the catalytic performances of different bimetallic entities will favor the formation of a unified understanding of the structure-reactivity relationships in heterogeneous bimetallic catalysts and thereby facilitate the upgrading of the current bimetallic catalysts. In this review, we will discuss the geometric and electronic structures of three representative types of bimetallic catalysts (bimetallic binuclear sites, bimetallic nanoclusters, and nanoparticles) and then summarize the synthesis methodologies and characterization techniques for different bimetallic entities, with emphasis on the recent progress made in the past decade. The catalytic applications of supported bimetallic binuclear sites, bimetallic nanoclusters, and nanoparticles for a series of important reactions are discussed. Finally, we will discuss the future research directions of catalysis based on supported bimetallic catalysts and, more generally, the prospective developments of heterogeneous catalysis in both fundamental research and practical applications.

Surfactant- and Ligand-Free Synthesis of Platinum Nanoparticles in Aqueous Solution for Catalytic Applications

The synthesis of surfactant-free and organic ligand-free metallic nanoparticles in solution remains challenging due to the nanoparticles’ tendency to aggregate. Surfactant- and ligand-free nanoparticles are particularly desirable in catalytic applications as surfactants, and ligands can block access to the nanoparticles’ surfaces. In this contribution, platinum nanoparticles are synthesized in aqueous solution without surfactants or bound organic ligands. Pt is reduced by sodium borohydride, and the borohydride has a dual role of reducing agent and weakly interacting stabilizer. The 5.3 nm Pt nanoparticles are characterized using UV-visible spectroscopy and transmission electron microscopy. The Pt nanoparticles are then applied as catalysts in two different reactions: the redox reaction of hexacyanoferrate(III) and thiosulfate ions, and H2O2 decomposition. Catalytic activity is observed for both reactions, and the Pt nanoparticles show up to an order of magnitude greater activity over the most active catalysts reported in the literature for hexacyanoferrate(III)/thiosulfate redox reactions. It is hypothesized that this enhanced catalytic activity is due to the increased electron density that the surrounding borohydride ions give to the Pt nanoparticle surface, as well as the absence of surfactants or organic ligands blocking surface sites.

Direct Propylene Epoxidation with Molecular Oxygen over Cobalt-Containing Zeolites

Direct propylene epoxidation with molecular oxygen is a dream reaction with 100% atom economy, but aerobic epoxidation is challenging because of the undesired over-oxidation and isomerization of epoxide products. Herein, we report the construction of uniform cobalt ions confined in faujasite zeolite, namely, Co@Y, which exhibits unprecedented catalytic performance in the aerobic epoxidation of propylene. Propylene conversion of 24.6% is achieved at propylene oxide selectivity of 57% at 773 K, giving a state-of-the-art propylene oxide production rate of 4.7 mmol/g_cat/h. The catalytic performance of Co@Y is very stable, and no activity loss can be observed for over 200 h. Spectroscopic analyses reveal the details of molecular oxygen activation on isolated cobalt ions, followed by interaction with propylene to produce epoxide, in which the Co²⁺-Co^δ+-Co²⁺ (2 < δ < 3) redox cycle is involved. The reaction pathway of propylene oxide and byproduct acrolein formation from propylene epoxidation is investigated by density functional theory calculations, and the unique catalytic performance of Co@Y is interpreted. This work presents an explicit example of constructing specific transition-metal ions within the zeolite matrix toward selective catalytic oxidations.

Support, composition, and ligand effects in partial oxidation of benzyl alcohol using gold–copper clusters

The effect of metallic composition, support, and ligands on catalytic performance using AuCu clusters in benzyl alcohol oxidation is investigated.

Precisely Engineered Supported Gold Clusters as a Stable Catalyst for Propylene Epoxidation

Designing a stable and selective catalyst with high H₂ utilisation is of pivotal importance for the direct gas-phase epoxidation of propylene. This work describes a facile one-pot methodology to synthesise ligand-stabilised sub-nanometre gold clusters immobilised onto a zeolitic support (TS-1) to engineer a stable Au/TS-1 catalyst. A non-thermal O₂ plasma technique is used for the quick removal of ligands with limited increase in particle size. Compared to untreated Au/TS-1 catalysts prepared using the deposition precipitation method, the synthesised catalyst exhibits improved catalytic performance, including 10 times longer lifetime (>20 days), increased PO selectivity and hydrogen efficiency in direct gas phase epoxidation. The structure-stability relationship of the catalyst is illustrated using multiple characterisation techniques, such as XPS, ³¹ P MAS NMR, DR-UV/VIS, HRTEM and TGA. It is hypothesised that the ligands play a guardian role in stabilising the Au particle size, which is vital in this reaction. This strategy is a promising approach towards designing a more stable heterogeneous catalyst.

The effect of size, charge state and composition on the binding of propene to yttrium-doped gold clusters

The catalytic activity of metal clusters can be easily tuned by their size, charge state, or the introduction of dopant atoms. Here, the dopant-, charge- and size-dependent propene adsorption on gold (Au_n⁺) and yttrium doped gold (Au_n−1Y⁺) clusters (n = 4–20) was investigated using combined gas-phase reaction studies and density functional theory computations. The increased charge transfer between the cluster and propene in the cationic clusters considerably enhances the propene binding on both pure and yttrium-doped species, compared to their neutral cluster counterparts, while yttrium-doping lowers the propene binding strength in a size-dependent way compared to the pure gold clusters. Chemical bonding and energy decomposition analysis indicate that there is no covalent bond between the cluster and propene. The preferred propene binding site on a cluster is indicated by the large lobes of its LUMO, together with the low coordination number of the adsorption site. In small yttrium-doped gold clusters propene can not only bind to the electron-deficient yttrium atom, but also to the partially positively-charged gold atoms. Therefore, by controlling the charge of the clusters, as well as by introducing yttrium dopants, the propene binding strength can be tuned, opening the route for new catalytic applications.

The catalytic activity of metal clusters can be easily tuned by their size, charge state, or the introduction of dopant atoms.

In Situ Decoration of Gold Nanoparticles on Graphene Oxide via Nanosecond Laser Ablation for Remarkable Chemical Sensing and Catalysis

Gold decorated graphene-based nano-hybrids find extensive research interest due to their enhanced chemical catalytic performance and biochemical sensing. The unique physicochemical properties and the very large surface area makes them propitious platform for the rapid buildouts of science and technology. Graphene serves as an outstanding matrix for anchoring numerous nanomaterials because of its atomically thin 2D morphological features. Herein, we have designed a metal-graphene nano-hybrid through pulsed laser ablation. Commercially available graphite powder was employed for the preparation of graphene oxide (GO) using modified Hummers' method. A solid, thin gold (Au) foil was ablated in an aqueous suspension of GO using second harmonic wavelength (532 nm) of the Nd:YAG laser for immediate generation of the Au-GO nano-hybrid. The synthesis strategy employed here does not entail any detrimental chemical reagents and hence avoids the inclusion of reagent byproducts to the reaction mixture, toxicity, and environmental or chemical contamination. Optical and morphological characterizations were performed to substantiate the successful anchoring of Au nanoparticles (Au NPs) on the GO sheets. Remarkably, these photon-generated nano-hybrids can act as an excellent surface enhanced Raman spectroscopy (SERS) platform for the sensing/detection of the 4-mercaptobenzoic acid (4-MBA) with a very low detection limit of 1 × 10-12 M and preserves better reproducibility also. In addition, these hybrid materials were found to act as an effective catalyst for the reduction of 4-nitrophenol (4-NP). Thus, this is a rapid, mild, efficient and green synthesis approach for the fabrication of active organometallic sensors and catalysts.

Ag-Based nanocomposites: synthesis and applications in catalysis

Ag-Based nanocomposites, including supported Ag nanocomposites and bimetallic Ag nanocomposites, have been intensively investigated as highly efficient catalysts because of their high activity and stability, easy preparation, low cost, and low toxicity. Herein, we systematically summarize and comprehensively evaluate versatile synthetic strategies for the preparation of Ag-based nanocomposites, and outline their recent advances in catalytic oxidation, catalytic reduction, photocatalysis and electrocatalysis. In addition, the challenges and prospects related to Ag-based nanocomposites for various catalytic applications are also discussed. In light of the most recent advances in Ag-based nanocomposites for catalysis applications, this review provides a comprehensive assessment on the material selection, synthesis and catalytic characteristics of these catalysts, which offers a strategic guide to build a close connection between Ag nanocomposites and catalysis applications.

An ultra-high H2S-resistant gold-based imidazolium ionic liquid catalyst for acetylene hydrochlorination

Enhancement of the sulfur resistance of gold-based catalysts is significantly relevant and highly desirable for the development and large-scale applications of these catalysts.

Peptide-Templated Gold Clusters as Enzyme-Like Catalyst Boost Intracellular Oxidative Pressure and Induce Tumor-Specific Cell Apoptosis

Anticancer metallodrugs that aim to physiological characters unique to tumor microenvironment are expected to combat drug tolerance and side-effects. Recently, owing to the fact that reactive oxygen species' is closely related to the development of tumors, people are committed to developing metallodrugs with the capacity of improving the level of reactive oxygen species level toinduce oxidative stress in cancer cells. Herein, we demonstrated that peptide templated gold clusters with atomic precision preferably catalyze the transformation of hydrogen peroxide into superoxide anion in oxidative pressure-type tumor cells. Firstly, we successfully constructed gold clusters by rationally designing peptide sequences which targets integrin ανβ₃ overexpressed on glioblastoma cells. The superoxide anion, radical derived from hydrogen peroxide and catalyzed by gold clusters, was confirmed in vitro under pseudo-physiological conditions. Then, kinetic parameters were evaluated to verify the catalytic properties of gold clusters. Furthermore, these peptide decorated clusters can serve as special enzyme-like catalyst to convert endogenous hydrogen peroxide into superoxide anion, elevated intracellular reactive oxygen species levels, lower mitochondrial membrane potential, damage biomacromolecules, and trigger tumor cell apoptosis consequently.

Theoretical Studies on the Direct Propylene Epoxidation Using Gold-Based Catalysts: A Mini-Review

Direct propylene epoxidation using Au-based catalysts is an important gas-phase reaction and is clearly a promising route for the future industrial production of propylene oxide (PO). For instance, gold nanoparticles or clusters that consist of a small number of atoms demonstrate unique and even unexpected properties, since the high ratio of surface to bulk atoms can provide new reaction pathways with lower activation barriers. Support materials can have a remarkable effect on Au nanoparticles or clusters due to charge transfer. Moreover, Au (or Au-based alloy, such as Au–Pd) can be loaded on supports to form active interfacial sites (or multiple interfaces). Model studies are needed to help probe the underlying mechanistic aspects and identify key factors controlling the activity and selectivity. The current theoretical/computational progress on this system is reviewed with respect to the molecular- and catalyst-level aspects (e.g., first-principles calculations and kinetic modeling) of propylene epoxidation over Au-based catalysts. This includes an analysis of H2 and O2 adsorption, H2O2 (OOH) species formation, epoxidation of propylene into PO, as well as possible byproduct formation. These studies have provided a better understanding of the nature of the active centers and the dominant reaction mechanisms, and thus, could potentially be used to design novel catalysts with improved efficiency.

Engineering nanoporous organic frameworks to stabilize naked Au clusters: a charge modulation approach

A simple charge modulation approach has been developed to stabilize naked Au clusters on a nanoporous conjugated organic network. Through engineering pore walls with regulated charges, the controllable growth of Au nanoclusters has been realized. The resulting supported catalyst exhibits excellent performance in the aerobic oxidation of alcohols.

Metal Catalysts for Heterogeneous Catalysis: From Single Atoms to Nanoclusters and Nanoparticles

Metal species with different size (single atoms, nanoclusters, and nanoparticles) show different catalytic behavior for various heterogeneous catalytic reactions. It has been shown in the literature that many factors including the particle size, shape, chemical composition, metal–support interaction, and metal–reactant/solvent interaction can have significant influences on the catalytic properties of metal catalysts. The recent developments of well-controlled synthesis methodologies and advanced characterization tools allow one to correlate the relationships at the molecular level. In this Review, the electronic and geometric structures of single atoms, nanoclusters, and nanoparticles will be discussed. Furthermore, we will summarize the catalytic applications of single atoms, nanoclusters, and nanoparticles for different types of reactions, including CO oxidation, selective oxidation, selective hydrogenation, organic reactions, electrocatalytic, and photocatalytic reactions. We will compare the results obtained from different systems and try to give a picture on how different types of metal species work in different reactions and give perspectives on the future directions toward better understanding of the catalytic behavior of different metal entities (single atoms, nanoclusters, and nanoparticles) in a unifying manner.

Post-synthesis of Zr-MOR as a robust solid acid catalyst for the ring-opening aminolysis of epoxides

Zirconosilicate with the MOR topology (Zr-MOR) was successfully prepared using a two-step post-synthesis strategy from pre-dealumination of a H-MOR zeolite and subsequent dry impregnation of Cp₂ZrCl₂.

Controlled synthesis of carbon-supported Co catalysts from single-sites to nanoparticles: characterization of the structural transformation and investigation of their oxidation catalysis

Structural transformation of Co species supported on activated carbon during heat treatment and the structure–activity relationship of the resulting species in the oxidation of ethylbenzene were investigated.

Epoxidation of propene using Au/TiO2: on the difference between H2 and CO as a co-reactant

The role of the reducing gas in the direct epoxidation of propene to propene oxide (PO) using O₂ over a Au/TiO₂ catalyst was studied through experiments and density functional theory calculations.