A Critical Size of Silicon Nano-Anodes for Lithium Rechargeable Batteries

Gelatin and sodium alginate derived carbon/silicon composites as high-performance anode materials for lithium-ion batteries

The volume expansion and poor conductivity greatly limit the application of silicon as an anode for lithium-ion batteries. Although nanocrystallization of silicon and its surface carbon coating can be improved to some extent, the serious problems of particle aggregation and structural instability have not been effectively solved. In this paper, gelatin and sodium alginate (GE + SA) derived carbon/silicon composites are successfully prepared by a liquid-phase method, the freeze-drying technique, and heat treatment. Si nanoparticles (NPs) are uniformly encapsulated in a three-dimensional network of N-doped carbon that is enriched with a rich pore structure. The reversible capacity of the particular Si@C composite electrode was maintained at 580 mA h g-1 after 300 cycles at a current density of 1 A g-1, showing good cycling stability. Meanwhile, the anode also has excellent rate performance with reversible capacities of 2230, 1458, 1101, and 686.6 mA h g-1 at current densities of 0.1, 0.5, 1, and 2 A g-1, respectively. The GE + SA derived carbon/silicon composites effectively solve the problems of particle aggregation and an unstable carbon/silicon interface structure and can become candidates for anode materials in lithium-ion batteries.

Key developments in magnesiothermic reduction of silica: insights into reactivity and future prospects

Porous Si (p-Si) nanomaterials are an exciting class of inexpensive and abundant materials within the field of energy storage. Specifically, p-Si has been explored in battery anodes to improve charge storage capacity, to generate clean fuels through photocatalysis and photoelectrochemical processes, for the stoichiometric conversion of CO2 to value added chemicals, and as a chemical H2 storage material. p-Si can be made from synthetic, natural, and waste SiO2 sources through a facile and inexpensive method called magnesiothermic reduction (MgTR). This yields a material with tunable properties and excellent energy storage capabilities. In order to tune the physical properties that affect performance metrics of p-Si, a deeper understanding of the mechanism of the MgTR and factors affecting it is required. In this perspective, we review the key developments in MgTR and discuss the thermal management strategies used to control the properties of p-Si. Additionally, we explore future research directions and approaches to bridge the gap between laboratory-scale experiments and industrial applications.

Stress-Relieving Carboxylated Polythiophene/Single-Walled Carbon Nanotube Conductive Layer for Stable Silicon Microparticle Anodes in Lithium-Ion Batteries

Stress-relieving and electrically conductive single-walled carbon nanotubes (SWNTs) and conjugated polymer, poly[3-(potassium-4-butanoate)thiophene] (PPBT), wrapped silicon microparticles (Si MPs) have been developed as a composite active material to overcome technical challenges such as intrinsically low electrical conductivity, low initial Coulombic efficiency, and stress-induced fracture due to severe volume changes of Si-based anodes for lithium-ion batteries (LIBs). The PPBT/SWNT protective layer surrounding the surface of the microparticles physically limits volume changes and inhibits continuous solid electrolyte interphase (SEI) layer formation that leads to severe pulverization and capacity loss during cycling, thereby maintaining electrode integrity. PPBT/SWNT-coated Si MP anodes exhibited high initial Coulombic efficiency (85%) and stable capacity retention (0.027% decay per cycle) with a reversible capacity of 1894 mA h g-1 after 300 cycles at a current density of 2 A g-1, 3.3 times higher than pristine Si MP anodes. The stress relaxation and underlying mechanism associated with the incorporation of the PPBT/SWNT layer were interpreted by quasi-deterministic and quantitative stress analyses of SWNTs through in situ Raman spectroscopy. PPBT/SWNT@Si MP anodes can maintain reversible stress recovery and 45% less variation in tensile stress compared with SWNT@Si MP anodes during cycling. The results verify the benefits of stress relaxation via a protective capping layer and present an efficient strategy to achieve long cycle life for Si-based anodes for next-generation LIBs.

High-Branched Natural Polysaccharide Flaxseed Gum Binder for Silicon-Based Lithium-Ion Batteries with High Capacity

Silicon-based anodes heavily depend on the binder to preserve the unbroken electrode structure. In the present work, natural flaxseed gum (FG) is used as a binder of silicon nanoparticles (SiNPs) anode for the first time. Owing to a large number of polar groups and a rich branched structure, this material not only anchors tightly to the surface of SiNPs through bonding interactions but also formed a hydrogen bonding network structure among molecules. As a result, the FG binder can endow the silicon electrode with stable interfacial adhesion and outstanding mechanical properties. In addition, FG with a high viscosity facilitates the homogeneous dispersion of the electrode components. When FG is used as a binder, the cycling performance of the Si anode is greatly improved. After one hundred cycles at an applied current density of 1 A g-1, the electrode continues to display remarkable electrochemical properties with a significant cyclic capacity (2213 mA h g-1) and initial Coulombic efficiency (ICE) of 89.7%.

A sustainable method for oxidizing phenanthrene in tropical soil using natural iron as a catalyst in a slurry phase reactor with persulfate assistance

The presence of impurities is a significant restriction to the use of natural iron minerals as catalysts in the advanced oxidation process (AOP), especially if applied for soil remediation. This study evaluated the catalytic activity of tropical soil, which has relatively low impurities and naturally contains iron, for the remediation of phenanthrene (PHE) contamination. The system showed good performance, and the best result was 81% PHE removal after 24 h under experimental conditions of pH 7, [PHE]0 = 300 mg/50 g soil, temperature 55 °C, air flow = 260 mL min-1, and [persulfate]0 = 20 mg kg-1, while the mineralization was 61%. Nevertheless, certain limitations were noted in the soil matrix following the remediation procedure, including the appearance of cracks in the soil aggregate, reduction in the crystal size of the soil particles, and decline in the iron and aluminium contents. The results confirmed that the radicals play a major role in the remediation process. SO4˙- was more dominant than O2˙-, while HO˙ played a minor role. Additionally, the by-products were detected by gas chromatography-mass spectroscopy (GC-MS), and the degradation pathway of PHE is proposed. Toxicity assessment tests were performed by using a computational method. In spite of the challenges, this research achieved notable progress in soil remediation, taking a significant step forward in implementing the AOP without catalysts to activate oxidants and remove PHE within the soil. Also, this approach supports sustainability by reducing the need for extra materials and providing an environmentally friendly way of soil remediation.

Self-Assembled Molecular Layers as Interfacial Engineering Nanomaterials in Rechargeable Battery Applications

Rechargeable batteries have transformed human lives and modern industry, ushering in new technological advancements such as mobile consumer electronics and electric vehicles. However, to fulfill escalating demands, it is crucial to address several critical issues including energy density, production cost, cycle life and durability, temperature sensitivity, and safety concerns is imperative. Recent research has shed light on the intricate relationship between these challenges and the chemical processes occurring at the electrode-electrolyte interface. Consequently, a novel approach has emerged, utilizing self-assembled molecular layers (SAMLs) of meticulously designed molecules as nanomaterials for interface engineering. This research provides a comprehensive overview of recent studies underscoring the significant roles played by SAML in rechargeable battery applications. It discusses the mechanisms and advantageous features arising from the incorporation of SAML. Moreover, it delineates the remaining challenges in SAML-based rechargeable battery research and technology, while also outlining future perspectives.

Reduced Volume Expansion of Micron-Sized SiOx via Closed-Nanopore Structure Constructed by Mg-Induced Elemental Segregation

The inherently huge volume expansion during Li uptake has hindered the use of Si-based anodes in high-energy lithium-ion batteries. While some pore-forming and nano-architecting strategies show promises to effectively buffer the volume change, other parameters essential for practical electrode fabrication, such as compaction density, are often compromised. Here we propose a new in situ Mg doping strategy to form closed-nanopore structure into a micron-sized SiOx particle at a high bulk density. The doped Mg atoms promote the segregation of O, so that high-density magnesium silicates form to generate closed nanopores. By altering the mass content of Mg dopant, the average radii (ranged from 5.4 to 9.7 nm) and porosities (ranged from 1.4 % to 15.9 %) of the closed pores are precisely adjustable, which accounts for volume expansion of SiOx from 77.8 % to 22.2 % at the minimum. Benefited from the small volume variation, the Mg-doped micron-SiOx anode demonstrates improved Li storage performance towards realization of a 700-(dis)charge-cycle, 11-Ah-pouch-type cell at a capacity retention of >80 %. This work offers insights into reasonable design of the internal structure of micron-sized SiOx and other materials that undergo conversion or alloying reactions with drastic volume change, to enable high-energy batteries with stable electrochemistry.

Structural Reversibility of Nanoscaled Sn Anodes

Alloying-type anode materials provide high capacity for lithium-ion batteries; however, they suffer pulverization problems resulting from the volume change during cycling. Realizing the cycling reversibility of these anodes is therefore critical for sustaining their electrochemical performance. Here, we investigate the structural reversibility of Sn NPs during cycling at atomic-level resolution utilizing in situ high-resolution TEM. We observed a surprisingly near-perfect structural reversibility after a complete cycle. A three-step phase transition happens during lithiation, accompanied by the generation of a significant number of defects, grain boundaries, and up to 202% volume expansion. In subsequent delithiation, the volume, morphology, and crystallinity of the Sn NPs were restored to their initial state. Theoretical calculations show that compressive stress drives the removal of vacancies generated within the NPs during delithiation, therefore maintaining their intact morphology. This work demonstrates that removing vacancies during cycling can efficiently improve the structural reversibility of high-capacity anode materials.

Precursor Induced Assembly of Si Nanoparticles Encapsulated in Graphene/Carbon Matrices and the Influence of Al2O3 Coating on their Properties as Anode for Lithium-Ion Batteries

The theoretical capacity of pristine silicon as anodes for lithium-ion batteries (LIBs) can reach up to 4200 mAh g-1, however, the low electrical conductivity and the huge volume expansion limit their practical application. To address this challenge, a precursor strategy has been explored to induce the curling of graphene oxide (GO) flakes and the enclosing of Si nanoparticles by selecting protonated chitosan as both assembly inducer and carbon precursor. The Si nanoparticles are dispersed first in a slurry of GO by ball milling, then the resulting dispersion is dried by a spray drying process to achieve instantaneous solution evaporation and compact encapsulation of silicon particles with GO. An Al2O3 layer is constructed on the surface of Si@rGO@C-SD composites by the atomic layer deposition method to modify the solid electrolyte interface. This strategy enhances obviously the electrochemical performance of the Si as anode for LIBs, including excellent long-cycle stability of 930 mAh g-1 after 1000 cycles at 1000 mA g-1, satisfied initial Coulomb efficiency of 76.7%, and high rate ability of 806 mAh g-1 at 5000 mA g-1. This work shows a potential solution to the shortcomings of Si-based anodes and provides meaningful insights for constructing high-energy anodes for LIBs.

Reduced graphene oxide-encaged submicron-silicon anode interfacially stabilized by Al2O3 nanoparticles for efficient lithium-ion batteries

Silicon-carbon composites have been recognized as some of the most promising anode candidates for advancing new-generation lithium-ion batteries (LIBs). The development of high-efficiency silicon/graphene anodes through a simple and cost-effective preparation route is significant. Herein, by using micron silicon as raw material, we designed a mesoporous composite of silicon/alumina/reduced graphene oxide (Si/Al2O3/RGO) via a two-step ball milling combined annealing process. Commercial Al2O3 nanoparticles are introduced as an interlayer due to the toughening effect, while RGO nanosheets serve as a conductive and elastic coating to protect active submicron silicon particles during lithium alloying/dealloying reactions. Owing to the rational porous structure and dual protection strategy, the core/shell structured Si/Al2O3/RGO composite is efficient for Li+ storage and demonstrates improved electrical conductivity, accelerated charge transfer and electrolyte diffusion, and especially high structural stability upon charge/discharge cycling. As a consequence, Si/Al2O3/RGO yields a high discharge capacity of 852 mA h g-1 under a current density of 500 mA g-1 even after 200 cycles, exhibiting a high capacity retention of ∼85%. Besides, Si/Al2O3/RGO achieves excellent cycling reversibility and superb high-rate capability with a stable specific capacity of 405 mA h g-1 at 3000 mA g-1. Results demonstrate that the Al2O3 interlayer is synergistic with the indispensable RGO nanosheet shells, affording more buffer space for silicon cores to alleviate the mechanical expansion and thus stabilizing active silicon species during charge/discharge cycles. This work provides an alternative low-cost approach to achieving high-capacity silicon/carbon composites for high-performance LIBs.

Tropical soil remediation from pyrene: Release the power of natural iron content in soil for the efficient oxidant's activation

Natural soil minerals often contain numerous impurities, resulting in comparatively lower catalytic activity. Tropical soils are viewed as poor from soil organic matter, cations, and anions, which are considered the main impurities in the soil that are restricted to utilizing natural minerals as a catalyst. In this regard, the dissolved iron and hematite crystals that presented naturally in tropical soil were evaluated to activate oxidants and degrade pyrene. The optimum results obtained in this study were 73 %, and the rate constant was 0.0553 h-1 under experimental conditions [pyrene] = 300 mg/50 g, pH = 7, T = 55 °C, airflow = 260 mL/min, [Persulfate (PS)] = 1.0 g/L, and humic acid (HA) ( % w/w) = 0.5 %. The soil characterization analysis after the remediation process showed an increase in moieties and cracks of the soil aggregate, and a decline in the iron and aluminium contents. The scavengers test revealed that both SO4•- and O2•- were responsible for the pyrene degradation, while HO• had a minor role in the degradation process. In addition, the monitoring of by-products, degradation pathways, and toxicity assessment were also investigated. This system is considered an efficient, green method, and could provide a step forward to develop low-cost soil remediation for full-scale implementation.

High voltage electrolytes for lithium-ion batteries with micro-sized silicon anodes

Micro-sized silicon anodes can significantly increase the energy density of lithium-ion batteries with low cost. However, the large silicon volume changes during cycling cause cracks for both organic-inorganic interphases and silicon particles. The liquid electrolytes further penetrate the cracked silicon particles and reform the interphases, resulting in huge electrode swelling and quick capacity decay. Here we resolve these challenges by designing a high-voltage electrolyte that forms silicon-phobic interphases with weak bonding to lithium-silicon alloys. The designed electrolyte enables micro-sized silicon anodes (5 µm, 4.1 mAh cm-2) to achieve a Coulombic efficiency of 99.8% and capacity of 2175 mAh g-1 for >250 cycles and enable 100 mAh LiNi0.8Co0.15Al0.05O2 pouch full cells to deliver a high capacity of 172 mAh g-1 for 120 cycles with Coulombic efficiency of >99.9%. The high-voltage electrolytes that are capable of forming silicon-phobic interphases pave new ways for the commercialization of lithium-ion batteries using micro-sized silicon anodes.

Fast cycling of lithium metal in solid-state batteries by constriction-susceptible anode materials

Interface reaction between lithium (Li) and materials at the anode is not well understood in an all-solid environment. This paper unveils a new phenomenon of constriction susceptibility for materials at such an interface, the utilization of which helps facilitate the design of an active three-dimensional scaffold to host rapid plating and stripping of a significant amount of a thick Li metal layer. Here we focus on the well-known anode material silicon (Si) to demonstrate that, rather than strong Li-Si alloying at the conventional solid-liquid interface, the lithiation reaction of micrometre-sized Si can be significantly constricted at the solid-solid interface so that it occurs only at thin surface sites of Si particles due to a reaction-induced, diffusion-limiting process. The dynamic interaction between surface lithiation and Li plating of a family of anode materials, as predicted by our constrained ensemble computational approach and represented by Si, silver (Ag) and alloys of magnesium (Mg), can thus more homogeneously distribute current densities for the rapid cycling of Li metal at high areal capacity, which is important in regard to solid-state battery application.

Rapid, in situ synthesis of ultra-small silicon particles for boosted lithium storage capability through ultrafast Joule heating

High-capacity anodes, especially silicon, suffer from huge volume fluctuations and electrode material pulverization during lithiation/delithiation. An accessible solution to this issue is to construct nano-silicon anodes with optimized particle size and a conductive matrix. In this work, we introduce a novel strategy for the in situ, rapid synthesis of ultra-small silicon nanoparticles uniformly embedded within carbonized nanosheets (us-Si/C) through swift high-temperature thermal radiative heating of sizable silicon nanoparticles (SiNPs). The us-Si/C anode shows ample capability to accommodate volume fluctuations during the lithiation/delithiation processes. The as-prepared anode exhibits a specific capacity of 920 mA h g-1 after 1000 cycles at a current density of 2 A g-1, indicating the advantages of the well-tailored structure. Additionally, the us-Si/C electrode can maintain an areal capacity of approximately 1.55 mA h cm-2 after 200 cycles at a high loading of 3.66 mg cm-2. Moreover, it presents practical applicability when assembled into LFP (lithium iron phosphate)//us-Si/C full cells. This preparation method presents great promise for achieving roll-to-roll manufacturing for practical applications due to its simplicity and efficiency.

A Brief Overview of Silicon Nanoparticles as Anode Material: A Transition from Lithium-Ion to Sodium-Ion Batteries

The successful utilization of silicon nanoparticles (Si-NPs) to enhance the performance of Li-ion batteries (LIBs) has demonstrated their potential as high-capacity anode materials for next-generation LIBs. Additionally, the availability and relatively low cost of sodium resources have a significant influence on developing Na-ion batteries (SIBs). Despite the unique properties of Si-NPs as SIBs anode material, limited study has been conducted on their application in these batteries. However, the knowledge gained from using Si-NPs in LIBs can be applied to develop Si-based anodes in SIBs by employing similar strategies to overcome their drawbacks. In this review, a brief history of Si-NPs' usage in LIBs is provided and discuss the strategies employed to overcome the challenges, aiming to inspire and offer valuable insights to guide future research endeavors.

Benchmarking the Effect of Particle Size on Silicon Anode Materials for Lithium-Ion Batteries

High-capacity silicon has been regarded as one of the most promising anodes for high-energy lithium-ion batteries. However, it suffers from severe volume expansion, particle pulverization, and repeated solid electrolyte interphase (SEI) growth, which leads to rapid electrochemical failure, while the particle size also plays key role here and its effects remain elusive. In this paper, through multiple-physical, chemical, and synchrotron-based characterizations, the evolutions of the composition, structure, morphology, and surface chemistry of silicon anodes with the particle size ranging from 50 to 5 µm upon cycling are benchmarked, which greatly link to their electrochemical failure discrepancies. It is found that the nano- and micro-silicon anodes undergo similar crystal to amorphous phase transition, but quite different composition transition upon de-/lithiation; at the same time, the nano- and 1 µm-silicon samples present obviously different mechanochemical behaviors from the 5 µm-silicon sample, such as electrode crack, particle pulverization/crack as well as volume expansion; in addition, the micro-silicon samples possess much thinner SEI layer than the nano-silicon samples upon cycling, and also differences in SEI compositions. It is hoped this comprehensive study and understanding should offer critical insights into the exclusive and customized modification strategies to diverse silicon anodes ranging from nano to microscale.

Influence of bridge structure manipulation on the electrochemical performance of π-conjugated molecule-bridged silicon quantum dot nanocomposite anode materials for lithium-ion batteries

To assess the influence of bridge structure manipulation on the electrochemical performance of π-conjugated molecule-bridged silicon quantum dot (Si QD) nanocomposite (SQNC) anode materials, we prepared two types of SQNCs by Sonogashira cross-coupling and hydrosilylation reactions; one is SQNC-VPEPV, wherein the Si QDs are covalently bonded by vinylene (V)-phenylene (P)-ethynylene (E)-phenylene-vinylene, and the other is SQNC-VPV. By comparing the electrochemical performances of the SQNCs, including that of the previously reported SQNC-VPEPEPV, we found that the SQNC with the highest specific capacity varied depending on the applied current density; SQNC-VPEPV (1420 mA h g^-1) > SQNC-VPV (779 mA h g^-1) > SQNC-VPEPEPV(465 mA h g^-1) at 800 mA g^-1, and SQNC-VPV (529 mA h g^-1) > SQNC-VPEPEPV (53 mA h g^-1) > SQNC-VPEPV (7 mA h g^-1) at 2000 mA g^-1. To understand this result, we performed EIS and GITT measurements of the SQNCs. In the course of investigating the lithium-ion diffusion coefficient, charge/discharge kinetics, and electrochemical performance of the SQNC anode materials, we found that electronic conductivity is a key parameter for determining the electrochemical performance of the SQNC. Two probable causes for the unique behavior of the electrochemical performances of the SQNCs are anticipated: (i) the SQNC with predominant electronic conductivity is varied depending on the current density applied during the cell operation, and (ii) the degree of surface oxidation of the Si QDs in the SQNCs varies depending on the structures of the surface organic molecules of the Si QDs and the bridging molecules of the SQNCs. Therefore, differences in the amount of oxides (SiO₂)/suboxides (SiO_x) on the surface of Si QDs lead to significant differences in conductivity and electrochemical performance between the SQNCs.

Insights into the Effect of SiO Particle Size on the Electrochemical Performance between Half and Full Cells for Li-Ion Batteries

Silicon monoxide (SiO) has attracted growing attention as one of the most promising anodes for high-energy-density lithium-ion batteries (LIBs), benefiting from relatively low volume expansion and superior cycling performance compared to bare silicon (Si). However, the size of the SiO particle for commercial application remains uncertain. Besides, the materials and concepts developed on the laboratory level in half cells are quite different from what is necessary for practical operation in full cells. Herein, we investigate the electrochemical performance of SiO with different particle sizes between half cells and full cells. The SiO with larger particle size exhibits worse electrochemical performance in the half cell, whereas it demonstrates excellent cycling stability with a high capacity retention of 91.3% after 400 cycles in the full cell. The reasons for the differences in their electrochemical performance between half cells and full cells are further explored in detail. The SiO with larger particle size possessing superior electrochemical performance in full cells benefits from consuming less electrolyte and not being easier to aggregate. It indicates that the SiO with larger particle size is recommended for commercial application and part of the information provided from half cells may not be advocated to predict the cycling performances of the anode materials. The analysis based on the electrochemical performance of the SiO between half cells and full cells gives fundamental insight into further Si-based anode research.

Scalable Interlayer Nanostructure Design for High-Rate (10C) Submicron Silicon-Film Electrode by Incorporating Silver Nanoparticles

High C-rate capability at 10C is a key performance indicator for the commercialization of the next-generation high-charging lithium microbattery. However, silicon (Si) anode satisfying the prerequisite high specific capacity suffers from poor electron/ionic conductivity, seriously limiting the 10C rate capability. Accordingly, we propose the strategy of inserting highly conductive silver nanoparticles (AgNPs) as an interlayer between two RF-sputtered amorphous Si thin films to form an Si/Ag/Si multilayered anode, with the density and spatial distribution of the AgNPs well-controlled by thermal evaporation. This strategy is exclusively beneficial to scale up film thickness for higher capacity. Without AgNPs, the 10C rate performance of the double-layer Si (D_Si) is worse than the single layer (S_Si) in the same total thickness, suggesting the adverse effect of the interface. However, this situation is progressively improved with the AgNPs density incorporated at the interface, where the densest AgNPs anode (D_SiAg3) demonstrated a noticeable improvement reaching 1250 mAh/g at 10 C with a 46% capacity retention rate. By scaling up to triple layers, T_SiAg3 performed the superior 10C rate capability to T_Si, testifying to the scalable potential of the unique design for boosting high-power batteries. Finally, with electrochemical impedance spectroscopy results, a possible mechanism to explain the enhancement in rate capability is subject to where Li-ion diffusion is accelerated by the charge-induced electric field condensing around the AgNPs. This design for a multilayered nanocomposite can contribute to the design and fabrication of high-charging batteries and battery-on-chip.

Silicon nanoparticles: Synthesis, uptake and their role in mitigation of biotic stress

In the current scenario of global warming and climate change, plants face many biotic stresses, which restrain growth, development and productivity. Nanotechnology is gaining precedence over other means to deal with biotic and abiotic constraints for sustainable agriculture. One of nature's most beneficial metalloids, silicon (Si) shows ameliorative effect against environmental challenges. Silicon/Silica nanoparticles (Si/SiO₂NPs) have gained special attention due to their significant chemical and optoelectronic capabilities. Its mesoporous nature, easy availability and least biological toxicity has made it very attractive to researchers. Si/SiO₂NPs can be synthesised by chemical, physical and biological methods and supplied to plants by foliar, soil, or seed priming. Upon uptake and translocation, Si/SiO₂NPs reach their destined cells and cause optimum growth, development and tolerance against environmental stresses as well as pest attack and pathogen infection. Using Si/SiO₂NPs as a supplement can be an eco-friendly and cost-effective option for sustainable agriculture as they facilitate the delivery of nutrients, assist plants to mitigate biotic stress and enhances plant resistance. This review aims to present an overview of the methods of formulation of Si/SiO₂NPs, their application, uptake, translocation and emphasize the role of Si/SiO₂NPs in boosting growth and development of plants as well as their conventional advantage as fertilizers with special consideration on their mitigating effects towards biotic stress.

Functionalized Silicon Particles for Enhanced Half- and Full-Cell Cycling of Si-Based Li-Ion Batteries

Vinylene carbonate (VC) and polyethylene oxide (PEO) have been investigated as functional agents that mimic the solid electrolyte interphase (SEI) chemistry of silicon (Si). VC and PEO are known to contribute to the stability of Si-based lithium-ion batteries as an electrolyte additive and as a SEI component, respectively. In this work, covalent surface functionalization was achieved via a facile route, which involves ball-milling the Si particles with sacrificial VC and PEO. Thermogravimetric analysis (TGA), X-ray photoelectron spectroscopy (XPS), and magic angle spinning nuclear magnetic resonance (MAS NMR) spectroscopy indicate that the additives are strongly bound to Si. In particular, MAS NMR shows Si-R or Si-O-R groups, which confirm functionalization of the Si after milling in VC or PEO. Particle size analysis by dynamic light scattering reveals that the additives facilitate particle size reduction and that the functionalized particles result in more stable dispersions based on zeta potential measurements. Raman mapping of the electrodes fabricated from the VC and PEO-coated active material with a polyacrylic acid (PAA) binder reveals a more homogenous distribution of Si and the carbon conductive additive compared to the electrodes prepared from the neat Si. Furthermore, the VC-milled Si strikingly exhibited the highest capacity in both half- and full-cell configurations, with more than 200 mAh g^-1 measured capacity compared to the neat Si in the half-cell format. This is linked to an improved electrode processing based on the Raman and zeta potential measurements as well as a thinner SEI (with more organic components for the functionalized Si relative to the neat Si) based on XPS analysis of the cycled electrodes. The effect of binder was also investigated by comparing PAA with P84 (polyimide type), where an increased capacity is observed in the latter case.

Hydrogen Bond-Enabled High-ICE Anode for Lithium-Ion Battery Using Carbonized Citric Acid-Coated Silicon Flake in PAA Binder

A silicon-based lithium-ion battery (LIB) anode is extensively studied because of silicon's abundance, high theoretical specific capacity (4200 mAh/g), and low operating potential versus lithium. Technical barriers to large-scale commercial applications include the low electrical conductivity and up to about 400% volume changes of silicon due to alloying with lithium. Maintaining the physical integrity of individual silicon particles and the anode structure is the top priority. We use strong hydrogen bonds between citric acid (CA) and silicon to firmly coat CA on silicon. Carbonized CA (CCA) enhances electrical conductivity of silicon. Polyacrylic acid (PAA) binder encapsulates silicon flakes by strong bonds formed by abundant COOH functional groups in PAA and on CCA. It results in excellent physical integrity of individual silicon particles and the whole anode. The silicon-based anode shows high initial coulombic efficiency, around 90%, and the capacity retention of 1479 mAh/g after 200 discharge-charge cycles at 1 A/g current. At 4 A/g, the capacity retention of 1053 mAh/g was achieved. A durable high-ICE silicon-based LIB anode capable of high discharge-charge current has been reported.

Recent Progress in Silicon-Based Materials for Performance-Enhanced Lithium-Ion Batteries

Silicon (Si) has been considered to be one of the most promising anode materials for high energy density lithium-ion batteries (LIBs) due to its high theoretical capacity, low discharge platform, abundant raw materials and environmental friendliness. However, the large volume changes, unstable solid electrolyte interphase (SEI) formation during cycling and intrinsic low conductivity of Si hinder its practical applications. Various modification strategies have been widely developed to enhance the lithium storage properties of Si-based anodes, including cycling stability and rate capabilities. In this review, recent modification methods to suppress structural collapse and electric conductivity are summarized in terms of structural design, oxide complexing and Si alloys, etc. Moreover, other performance enhancement factors, such as pre-lithiation, surface engineering and binders are briefly discussed. The mechanisms behind the performance enhancement of various Si-based composites characterized by in/ex situ techniques are also reviewed. Finally, we briefly highlight the existing challenges and future development prospects of Si-based anode materials.

Construction of porous Si/Ag@C anode for lithium-ion battery by recycling volatile deposition waste derived from refining silicon

Owing to the rapid advancement of the photovoltaic industry, a lot of photovoltaic (PV) silicon waste will be generated. Thus, the recycling and reuse of waste silicon have become particularly important, both for environmental remediation and economic benefits. In this work, a special structure of porous Si nanoparticles embedded nano-Ag and coated carbon layer (P-SiNPs/Ag@C) was produced by silver-assisted chemical etching (Ag-ACE) the deposited silicon waste. The special porous structure and carbon layer coating can effectively address the volume expansion issues during charge/discharge. The intercalated Ag nanoparticles greatly reduced the transfer impedance and enhanced the electrical conductivity of the anode material. As a result, the novel-designed P-SiNPs/Ag@C anode can maintain a prominent reversible capacity (1521 mAh·g^-1 at 0.2 A g^-1 after 50 cycles) and outstanding rate performance (1099 mAh·g^-1 at 2 A g^-1). When the current density at 1 A g^-1, the specific capacity still maintains at 706 mAh·g^-1 over 300 cycles. The superiority of the prepared P-SiNPs/Ag@C structures was further confirmed by Comsol Multiphysics software. Impressively, the synthesis route provides a novel avenue for value-added utilization of residual silicon waste resources from EB refining silicon and the preparation of high-performance lithium battery silicon-based anode.

Electrochemical and X-ray Photoelectron Spectroscopic Study of Early SEI Formation and Evolution on Si and Si@C Nanoparticle-Based Electrodes

Carbon coatings can help to stabilize the electrochemical performance of high-energy anodes using silicon nanoparticles as the active material. In this work, the comparison of the behavior and chemical composition of the Solid Electrolyte Interphase (SEI) was carried out between Si nanoparticles and carbon-coated Si nanoparticles (Si@C). A combination of two complementary analytical techniques, Electrochemical Impedance Spectroscopy and X-ray Photoelectron Spectroscopy (XPS), was used to determine the intrinsic characteristics of the SEI. It was demonstrated that the SEI on Si particles is more resistive than the SEI on the Si@C particles. XPS demonstrated that the interface on the Si particles contains more oxygen when not covered with carbon, which shows that a protective layer of carbon helps to reduce the number of inorganic components, leading to more resistive SEI. The combination of those two analytical techniques is implemented to highlight the features and evolution of interfaces in different battery technologies.

Design principles for heterointerfacial alloying kinetics at metallic anodes in rechargeable batteries

How surface chemistry influences reactions occurring thereupon has been a long-standing question of broad scientific and technological interest. Here, we consider the relation between the surface chemistry at interfaces and the reversibility of electrochemical transformations at rechargeable battery electrodes. Using Zn as a model system, we report that a moderate strength of chemical interaction between the deposit and the substrate-neither too weak nor too strong-enables highest reversibility and stability of the plating/stripping redox processes. Focused ion beam and electron microscopy were used to directly probe the morphology, chemistry, and crystallography of heterointerfaces of distinct natures. Analogous to the empirical Sabatier principle for chemical heterogeneous catalysis, our findings arise from competing interfacial processes. Using full batteries with stringent negative electrode-to-positive electrode capacity (N:P) ratios, we show that such knowledge provides a powerful tool for designing key materials in highly reversible battery systems based on Earth-abundant, low-cost metals such as Zn and Na.

A Review on Recent Advancements of Ni-NiO Nanocomposite as an Anode for High-Performance Lithium-Ion Battery

Recently, lithium-ion batteries (LIBs) have been widely employed in automobiles, mining operations, space applications, marine vessels and submarines, and defense or military applications. As an anode, commercial carbon or carbon-based materials have some critical issues such as insufficient charge capacity and power density, low working voltage, deadweight formation, short-circuiting tendency initiated from dendrite formation, device warming up, etc., which have led to a search for carbon alternatives. Transition metal oxides (TMOs) such as NiO as an anode can be used as a substitute for carbon material. However, NiO has some limitations such as low coulombic efficiency, low cycle stability, and poor ionic conductivity. These limitations can be overcome through the use of different nanostructures. This present study reviews the integration of the electrochemical performance of binder involved nanocomposite of NiO as an anode of a LIB. This review article aims to epitomize the synthesis and characterization parameters such as specific discharge/charge capacity, cycle stability, rate performance, and cycle ability of a nanocomposite anode. An overview of possible future advances in NiO nanocomposites is also proposed.

Crystallographically Textured Electrodes for Rechargeable Batteries: Symmetry, Fabrication, and Characterization

The vast of majority of battery electrode materials of contemporary interest are of a crystalline nature. Crystals are, by definition, anisotropic from an atomic-structure perspective. The inherent structural anisotropy may give rise to favored mesoscale orientations and anisotropic properties whether the material is in a rest state or subjected to an external stimulus. The overall perspective of this review is that intentional manipulation of crystallographic anisotropy of electrochemically active materials constitute an untapped parameter space in energy storage systems and thus provide new opportunities for materials innovations and design. To that end, we contend that crystallographically textured electrodes, as opposed to their textureless poly crystalline or single-crystalline analogs, are promising candidates for next-generation storage of electrical energy in rechargeable batteries relevant to commercial practice. This perspective is underpinned first by the fundamental─to a first approximation─uniaxial, rotation-invariant symmetry of electrochemical cells. On this basis, we show that a crystallographically textured electrode with the preferred orientation aligned out-of-plane toward the counter electrode represents an optimal strategy for utilization of the crystals' anisotropic properties. Detailed analyses of anisotropy of different types lead to a simple, but potentially useful general principle that "P_ec//P_c" textures are optimal for metal anodes, and "P_ec//S_c" textures are optimal for insertion-type electrodes.

In Situ Synthesis and Dual Functionalization of Nano Silicon Enabled by a Semisolid Lithium Rechargeable Flow Battery

Nanosized silicon has attracted considerable attentions as a new-generation anode material for lithium-ion batteries (LIBs) due to its exceptional theoretical capacity and reasonable cyclic stability. However, serious side reactions often take place at the nanosized silicon/electrolyte interface in LIBs, where critical electrochemical properties such as initial Coulombic efficiency (ICE) are compromised. On the basis of this feature, a new method is developed to synthesize nanosilicon-based particles in a facile, scalable way, which are endowed with the function of prelithiation and storage stability in air. A semisolid lithium rechargeable flow battery (SSFB) technology is used for the first time to convert the micrometer-sized silicon raw material into an amorphous-nanosilicon-based material (ANSBM), as a result of the pulverization process induced by the repeated lithiation/delithiation cycles. The particle size is successfully reduced from 1-4 μm to around 30 nm after cycles in the flow battery. Bulk functionalization of the nano silicon is introduced by the unbalanced lithiation/delithiation cyclic process, which endows ANSBM with a unique prelithiation capability universally applicable to different anode systems such as nanosized Si, SiO_x, and graphite, as evidenced by the significantly improved ICEs. Superior air stability (10% relative humidity) is exhibited by ANSBM due to surface functionalization by the stable interfacial layer encapsulated by electron-conductive carbon. The outcome of this work provides a promising way to synthesize dual-functionalized nano silicon with good electrochemical performance in terms of improved capacity and increased initial Coulombic efficiency when it is composited with other typical anode materials.

Al2O3-Coated Si-Alloy Prepared by Atomic Layer Deposition as Anodes for Lithium-Ion Batteries

Silicon-based anodes can increase the energy density of Li-ion batteries (LIBs) owing to their large weights and volumetric capacities. However, repeated charging and discharging can rapidly deteriorate the electrochemical properties because of a large volume change in the electrode. In this study, a commercial Fe-Si powder was coated with Al2O3 layers of different thicknesses via atomic layer deposition (ALD) to prevent the volume expansion of Si and suppress the formation of crack-induced solid electrolyte interfaces. The Al2O3 content was controlled by adjusting the trimethyl aluminum exposure time, and higher Al2O3 contents significantly improved the electrochemical properties. In 300 cycles, the capacity retention rate of a pouch full-cell containing the fabricated anodes increased from 69.8% to 72.3% and 79.1% depending on the Al2O3 content. The powder characterization and coin and pouch cell cycle evaluation results confirmed the formation of an Al2O3 layer on the powder surface. Furthermore, the expansion rate observed during the charging/discharging of the pouch cell indicated that the deposited layer suppressed the powder expansion and improved the cell stability. Thus, the performance of an LIB containing Si-alloy anodes can be improved by coating an ALD-synthesized protective Al2O3 layer.

Water-Soluble Conductive Composite Binder for High-Performance Silicon Anode in Lithium-Ion Batteries

The design of novel and high-performance binder systems is an efficient strategy to resolve the issues caused by huge volume changes of high-capacity anodes. Herein, we develop a novel water-soluble bifunctional binder composed of a conductive polythiophene polymer (PED) and high-adhesive polyacrylic acid (PAA) with abundant polar groups. Compared with conventional conductive additives, the flexible conductive polymer can solve the insufficient electrical contact between active materials and the conductive agent, thus providing the integral conductive network, which is extremely important for stable electrochemical performance. Additionally, the polar groups of this composite binder can form double H-bond interactions with the hydroxyl groups of SiO2 layers onto the silicon surface, keeping an integral electrode structure, which can decrease the continuous formation of SEI films during the repeated cycles. Benefiting from these bifunctional advantages, the Si electrodes with the composite binder delivered a high reversible capacity of 2341 mAh g−1 at 1260 mA g−1, good cycle stability with 88.8% retention of the initial reversible capacity over 100 cycles, and high-rate capacity (1150 mAh g−1 at 4200 mA g−1). This work opens up a new venture to develop multifunctional binders to enable the stable operation of high-capacity anodes for high-energy batteries.

Revisiting the Roles of Natural Graphite in Ongoing Lithium-Ion Batteries

Graphite, commonly including artificial graphite and natural graphite (NG), possesses a relatively high theoretical capacity of 372 mA h g^-1 and appropriate lithiation/de-lithiation potential, and has been extensively used as the anode of lithium-ion batteries (LIBs). With the requirements of reducing CO₂ emission to achieve carbon neutral, the market share of NG anode will continue to grow due to its excellent processability and low production energy consumption. NG, which is abundant in China, can be divided into flake graphite (FG) and microcrystalline graphite (MG). In the past 30 years, many researchers have focused on developing modified NG and its derivatives with superior electrochemical performance, promoting their wide applications in LIBs. Here, a comprehensive overview of the origin, roles, and research progress of NG-based materials in ongoing LIBs is provided, including their structure, properties, electrochemical performance, modification methods, derivatives, composites, and applications, especially the strategies to improve their high-rate and low-temperature charging performance. Prospects regarding the development orientation as well as future applications of NG-based materials are also considered, which will provide significant guidance for the current and future research of high-energy-density LIBs.

Lithium-Diffusion Induced Capacity Losses in Lithium-Based Batteries

Rechargeable lithium-based batteries generally exhibit gradual capacity losses resulting in decreasing energy and power densities. For negative electrode materials, the capacity losses are largely attributed to the formation of a solid electrolyte interphase layer and volume expansion effects. For positive electrode materials, the capacity losses are, instead, mainly ascribed to structural changes and metal ion dissolution. This review focuses on another, so far largely unrecognized, type of capacity loss stemming from diffusion of lithium atoms or ions as a result of concentration gradients present in the electrode. An incomplete delithiation step is then seen for a negative electrode material while an incomplete lithiation step is obtained for a positive electrode material. Evidence for diffusion-controlled capacity losses is presented based on published experimental data and results obtained in recent studies focusing on this trapping effect. The implications of the diffusion-controlled Li-trapping induced capacity losses, which are discussed using a straightforward diffusion-based model, are compared with those of other phenomena expected to give capacity losses. Approaches that can be used to identify and circumvent the diffusion-controlled Li-trapping problem (e.g., regeneration of cycled batteries) are discussed, in addition to remaining challenges and proposed future research directions within this important research area.

A granular approach to electrode design

The consistency of cathode particles plays a pivotal role in battery performance.

Properties of Fe-Si Alloy Anode for Lithium-Ion Battery Synthesized Using Mechanical Milling

Silicon (Si)-based anode materials can increase the energy density of lithium (Li)-ion batteries owing to the high weight and volume capacity of Si. However, their electrochemical properties rapidly deteriorate due to large volume changes in the electrode resulting from repeated charging and discharging. In this study, we manufactured structurally stable Fe–Si alloy powders by performing high-energy milling for up to 24 h through the reduction of the Si phase size and the formation of the α-FeSi₂ phase. The cause behind the deterioration of the electrochemical properties of the Fe–Si alloy powder produced by over-milling (milling for an increased time) was investigated. The 12 h milled Fe–Si alloy powder showed the best electrochemical properties. Through the microstructural analysis of the Fe–Si alloy powders after the evaluation of half/full coin cells, powder resistance tests, and charge/discharge cycles, it was found that this was due to the low electrical conductivity and durability of β-FeSi₂. The findings provide insight into the possible improvements in battery performance through the commercialization of Fe–Si alloy powders produced by over-milling in a mechanical alloying process.

Silicon micron cages derived from a halloysite nanotube precursor and aluminum sacrificial template in molten AlCl3 as an anode for lithium-ion batteries

Porous nanostructures have been proposed a promising strategy to improve the electrochemical performance of Si materials as anodes of lithium-ion batteries (LIBs). However, expensive raw materials and the tedious preparation processes hinder their widespread adoption. In this work, silicon micron cages (SMCs) have been synthesized in molten AlCl₃ through using spherical aluminum particles as a sacrificial template, and the earth-abundant and low-cost natural halloysite clay as a precursor. The aluminum spheres (1–3 μm) not only act as a sacrificial template but also facilitate the formation of silicon branches, which connect together to form SMCs. As anodes for LIBs, the SMC electrode exhibits a high reversible capacity of 1977.5 mA h g⁻¹ after 50 cycles at a current density of 0.2 A g⁻¹, and 1035.1 mA h g⁻¹ after 300 cycles at a current density of 1.0 A g⁻¹. The improved electrochemical performance of SMCs could be ascribed to the micron cage structure, providing abundant buffering space and mesopores for Si expansion. This promising method is expected to offer a pathway towards the scalable application of Si-based anode materials in the next-generation LIB technology.

(1) Silicon micron cages (SMCs) was synthesized using natural halloysite as precursor. (2) The electrochemical performance of SMCs as anode materials of lithium-ion batteries can be improved for the micron cage structure.

Li2O-Based Cathode Additives Enabling Prelithiation of Si Anodes

Low first-cycle Coulombic efficiency is especially poor for silicon (Si)-based anodes due to the high surface area of the Si-active material and extensive electrolyte decomposition during the initial cycles forming the solid electrolyte interphase (SEI). Therefore, developing successful prelithiation methods will greatly benefit the development of lithium-ion batteries (LiBs) utilizing Si anodes. In pursuit of this goal, in this study, lithium oxide (Li2O) was added to a LiNi0.6Mn0.2Co0.2O2 (NMC622) cathode using a scalable ball-milling approach to compensate for the initial Li loss at the anode. Different milling conditions were tested to evaluate the impact of particle morphology on the additive performance. In addition, Co3O4, a well-known oxygen evolution reaction catalyst, was introduced to facilitate the activation of Li2O. The Li2O + Co3O4 additives successfully delivered an additional capacity of 1116 mAh/gLi2O when charged up to 4.3 V in half cells and 1035 mAh/gLi2O when charged up to 4.1 V in full cells using Si anodes.

Structuring of Si into Multiple Scales by Metal-Assisted Chemical Etching

Structuring Si, ranging from nanoscale to macroscale feature dimensions, is essential for many applications. Metal-assisted chemical etching (MaCE) has been developed as a simple, low-cost, and scalable method to produce structures across widely different dimensions. The process involves various parameters, such as catalyst, substrate doping type and level, crystallography, etchant formulation, and etch additives. Careful optimization of these parameters is the key to the successful fabrication of Si structures. In this review, recent additions to the MaCE process are presented after a brief introduction to the fundamental principles involved in MaCE. In particular, the bulk-scale structuring of Si by MaCE is summarized and critically discussed with application examples. Various approaches for effective mass transport schemes are introduced and discussed. Further, the fine control of etch directionality and uniformity, and the suppression of unwanted side etching are also discussed. Known application examples of Si macrostructures fabricated by MaCE, though limited thus far, are presented. There are significant opportunities for the application of macroscale Si structures in different fields, such as microfluidics, micro-total analysis systems, and microelectromechanical systems, etc. Thus more research is necessary on macroscale MaCE of Si and their applications.

On the diatomite-based nanostructure-preserving material synthesis for energy applications

The present article overviews the current state-of-the-art and future prospects for the use of diatomaceous earth (DE) in the continuously expanding sector of energy science and technology. An eco-friendly direct source of silica and the production of silicon, diatomaceous earth possesses a desirable nano- to micro-structure that offers inherent advantages for optimum performance in existing and new applications in electrochemistry, catalysis, optoelectronics, and biomedical engineering. Silica, silicon and silicon-based materials have proven useful for energy harvesting and storage applications. However, they often encounter setbacks to their commercialization due to the limited capability for the production of materials possessing fascinating microstructures to deliver optimum performance. Despite many current research trends focusing on the means to create the required nano- to micro-structures, the high cost and complex, potentially environmentally harmful chemical synthesis techniques remain a considerable challenge. The present review examines the advances made using diatomaceous earth as a source of silica, silicon-based materials and templates for energy related applications. The main synthesis routes aimed at preserving the highly desirable naturally formed neat nanostructure of diatomaceous earth are assessed in this review that culminates with the discussion of recently developed pathways to achieving the best properties. The trend analysis establishes a clear roadmap for diatomaceous earth as a source material of choice for current and future energy applications.

Stabilizing a Si Anode via an Inorganic Oligomer Binder Enabled by Robust Polar Interfacial Interactions

Exploiting macromolecule binders has been demonstrated as an effective approach to stabilize a Si anode with a huge volume change. The macromolecule polymer binders with vast intra/intermolecular interactions lead to an inferior dispersion of binders on a Si active material. Herein, a potassium triphosphate (PTP) inorganic oligomer was exploited as a robust binder to alleviate the problem of capacity fading in Si-based electrodes. PTP has abundant P-O^- bonds and P═O bonds, which can form strong ion-dipolar and dipolar-dipolar forces with a hydroxylated Si surface (Si-OH). Particularly, the PTP inorganic oligomer has a short-chain structure and high water solubility, resulting in a superior dispersion of the PTP binder on Si nanoparticles (nano-Si) to effectively enhance the mechanical stability of Si-based electrodes. Hence, the as-prepared Si-based anode exhibits obviously improved electrochemical performance, delivering a charge capacity of 1279.7 mAh g^-1 after 300 cycles at 800 mA g^-1 with a high capacity retention of 72.7%. Moreover, using the PTP binder, a dense Si anode can be achieved for high volumetric energy density. The success of this study shows that the PTP inorganic oligomer as a binder has great significance for future advanced binder research.