DSN signal amplification strategy based nanochannels biosensor for the detection of miRNAs

MiRNA-21 is recognized as an important biological marker for the diagnosis, treatment, and prognosis of breast cancer. Here, we have created a nanochannel biosensor utilizing the duplex-specific nuclease (DSN) signal amplification strategy to achieve the detection of miRNAs. In this system, DNA as the capture probe was covalently immobilized on the surface of nanochannels, which hybridized with the target miRNA and forms RNA/DNA duplexes. DSN could cleave the probe DNA in RNA/DNA duplexes, recycling target miRNA, which may again hybridized with other DNA probes. After N cycles, most of the DNA probes had been cleaved, and the content of miRNA could be quantified by detecting changes in surface charge density. This biosensor can distinguish miR-21 from non-complementary miRNAs and one-base mismatched miRNAs, with reliable detection limits as low as 1 fM in PBS. In addition, we had successfully applied this method to analysis of total RNA samples in MCF-7 cells and HeLa cells, and the nanochannels had also shown excellent responsiveness and strong anti-interference ability. This new method is expected to contribute to miRNA detection in clinical diagnostics, providing a unique approach to detecting and distinguishing disease-associated molecules.

Ammonia-Induced Anomalous Ion Transport in Covalent Organic Framework Nanochannels

More anomalous transport behaviors have been observed with the rapid progress in nanofabrication technology and characterization tools. The ions/molecules inside nanochannels can act dramatically different from those in the bulk systems and exhibit novel mechanisms. Here, we have reported the fabrication of a nanodevice, covalent organic frameworks covered theta pipette (CTP), that combine the advantages of theta pipette (TP), nanochannels framework, and field-effect transistors (FETs) for controlling and modulating the anomalous transport. Our results show that ammonia, a weak base, causes a continuous supply of ions inside covalent organic framework (COF) nanochannels, leading to an abnormally high current depending on the ionic/molecular size and the pore size of the nanochannel. Furthermore, CTP can distinguish different concentrations of ammonia and have all of the qualities of a nanosensor.

Electrostatic-Gated Kinetics of Rapid Ion Transfers at a Nano-liquid/Liquid Interface

Charge (ion and electron)-transfer reactions at a liquid/liquid interface are critical processes in many important biological and chemical systems. An ion-transfer (IT) process is usually very fast, making it difficult to accurately measure its kinetic parameters. Nano-liquid/liquid interfaces supported at nanopipettes are advantageous approaches to study the kinetics of such ultrafast IT processes due to their high mass transport rate. However, correct measurements of IT kinetic parameters at nanointerfaces supported at nanopipettes are inhibited by a lack of knowledge of the nanometer-sized interface geometry, influence of the electric double layer, wall charge polarity, etc. Herein, we propose a new electrochemical characterization equation for nanopipettes and make a suggestion on the shape of a nano-water/1,2-dichloroethane (nano-W/DCE) interface based on the characterization and calculation results. A theoretical model based on the Poisson-Nernst-Planck equation was applied to systematically study how the electric double layer influences the IT process of cations (TMA⁺, TEA⁺, TPrA⁺, ACh⁺) and anions (ClO₄^-, SCN^-, PF₆^-, BF₄^-) at the nano-W/DCE interface. The relationships between the wall charge conditions and distribution of concentration and potential inside the nanopipette revealed that the measured standard rate constant (k⁰) was enhanced when the polarity of the ionic species was opposite to the pipette wall charge and reduced when the same. This work lays the right foundation to obtain the kinetics at the nano-liquid/liquid interfaces.

Construction of A High-Flux Protein Transport Channel Inspired by the Nuclear Pore Complex

Inspired by the nuclear pore complex (NPC), herein we have established a biomimetic high-flux protein delivery system via the ingenious introduction of pillar[5]arene-based host-guest system into one side of artificial hour-glass shaped nanochannel. With a transport flux of 660 lysozymes per minute, the system provides efficient high-flux protein transport at a rate which is significantly higher than that of an unmodified nanochannel and conventional bilateral symmetrical modified nanochannels. In view of these promising results, the use of artificial nanochannel to improve protein transport not only presents a new potential chemical model for biological research and better understanding of protein transport behavior in the living systems, but also provides a high-flux protein transporter device, which may have applications in the design of protein drug release systems, protein separation systems and microfluidics in the near future.

Forward Solute Transport in Forward Osmosis Using a Freestanding Graphene Oxide Membrane

A graphene oxide membrane (GOM) has the potential to be used in forward osmosis (FO) because it has a high water permeability and low reverse salt flux. To explore suitable applications, we initiated the investigation of the forward solute transport through a freestanding GOM in FO. Both uncharged solutes (PEG 200 and PEG 1000) and charged solutes (NaCl, MgSO₄, and MgCl₂) were investigated, and the forward solute flux in FO was tested. The Donnan steric pore model (DSPM) was utilized to calculate the forward solute flux of the freestanding GOM in FO when discussing diffusion, convection, and electromigration. Our results showed that the freestanding GOM has a better separation performance for multivalent ions than the monovalent ions in the FO mode. We found an information gap between the calculated and experimental forward solute flux values, especially when charged solutes were used in the feed solution and the electrical double layer (EDL) was thick. We propose that the EDL inside the GOM has a screening effect on the forward ion transport during FO, even in the presence of relatively high water flux. According to our analysis, the forward solute transport for charged solutes is governed by steric exclusion and interfacial Donnan exclusion as well as EDL screening along the nanochannels inside the membrane. Our study provides guidance for the future use of the freestanding GOM during FO for water and wastewater treatment.

Anomalies of Ionic/Molecular Transport in Nano and Sub-Nano Confinement

Understanding and exploring the transport behaviors of ions and molecules in the nano and sub-nano confinement has great meaning in the fields of nanofluidics and basic transport physics. With the rapid progress in nanofabrication technology and effective characterization protocols, more and more anomalous transport behaviors have been observed and the ions/molecules inside small confinement can behave dramatically differently from bulk systems and present new mechanisms. In this Mini Review, we summarize the recent advances in the anomalous ionic/molecular transport behaviors in nano and sub-nano confinement. Our discussion includes the ionic/molecular transport of various confinement with different surface properties, static structures, and dynamic structures. Furthermore, we provide a brief overview of the latest applications of nanofluidics in membrane separation and energy conversion.

Three-Dimensional Single Particle Tracking and Its Applications in Confined Environments

Single particle tracking (SPT) has proven to be a powerful technique in studying molecular dynamics in complicated systems. We review its recent development, including three-dimensional (3D) SPT and its applications in probing nanostructures and molecule-surface interactions that are important to analytical chemical processes. Several frequently used 3D SPT techniques are introduced. Especially of interest are those based on point spread function engineering, which are simple in instrumentation and can be easily adapted and used in analytical labs. Corresponding data analysis methods are briefly discussed. We present several important case studies, with a focus on probing mass transport and molecule-surface interactions in confined environments. The presented studies demonstrate the great potential of 3D SPT for understanding fundamental phenomena in confined space, which will enable us to predict basic principles involved in chemical recognition, separation, and analysis, and to optimize mass transport and responses by structural design and optimization.

In situ synthesis of a MOFs/PAA hybrid with ultrahigh ionic current rectification

In recent decades, the ionic current rectification (ICR) property of asymmetric nanochannels has been widely explored in applications of energy conversion, gas separation, water purification and bioanalysis/sensors. How to fabricate nanofluidic devices with a high ICR characteristic remains of critical importance to the development of nanofluidics. Herein, we fabricated an asymmetric MOFs/PAA hybrid via in situ synthesis of a zeolitic imidazole framework (ZIF-90) on porous anodic alumina (PAA) nanochannels. The introduction of asymmetric geometry and charge distribution provides the hybrid with ultrahigh ionic rectification, which can be easily measured using an electrochemical detector. This rectification mechanism is elucidated via finite element simulation, which proves that asymmetric geometry as well as the protonation and deprotonation under varied pH values dominates the ICR property. With the advantages of low cost and facile fabrication while supporting high ionic current rectification, the prepared MOFs/PAA hybrid can be considered as a significant paradigm in nanofluidic systems and has potential applications in the fields of new ionic devices and energy conversion systems.

Integrated Solid-State Nanopore Electrochemistry Array for Sensitive, Specific, and Label-Free Biodetection

Nanopore ionic current measurement is currently a prevailing readout and offers considerable opportunities for bioassays. Extending conventional electrochemistry to nanoscale space, albeit noteworthy, remains challenging. Here, we report a versatile electrochemistry array established on a nanofluidic platform by controllably depositing gold layers on the two outer sides of anodic aluminum oxide (AAO) nanopores, leading to form an electrochemical microdevice capable of performing amperometry in a label-free manner. Electroactive species ferricyanide ions passing through gold-decorated nanopores act as electrochemical indicator to generate electrolytic current signal. The electroactive species flux that dominates current signal response is closely related to the nanopore permeability. Such well-characteristic electrolytic current-species flux correlation lays a premise for quantitative electrochemical analysis. As a proof-of-concept demonstration, we preliminarily verify the analytical utility by detection of nucleic acid and protein at picomolar concentration levels. Universal surface modification and molecule assembly, specific target recognition and reliable signal output in nanopore enable direct electrochemical detection of biomolecules without the need of cumbersome probe labeling and signal amplification.

Unexpected behaviors in molecular transport through size-controlled nanochannels down to the ultra-nanoscale

Ionic transport through nanofluidic systems is a problem of fundamental interest in transport physics and has broad relevance in desalination, fuel cells, batteries, filtration, and drug delivery. When the dimension of the fluidic system approaches the size of molecules in solution, fluid properties are not homogeneous and a departure in behavior is observed with respect to continuum-based theories. Here we present a systematic study of the transport of charged and neutral small molecules in an ideal nanofluidic platform with precise channels from the sub-microscale to the ultra-nanoscale (<5 nm). Surprisingly, we find that diffusive transport of nano-confined neutral molecules matches that of charged molecules, as though the former carry an effective charge. Further, approaching the ultra-nanoscale molecular diffusivities suddenly drop by up to an order of magnitude for all molecules, irrespective of their electric charge. New theoretical investigations will be required to shed light onto these intriguing results.

Transport through nanochannels is usually dominated by electrostatic interactions and depends on the charge of diffusing molecules. Here the authors show that for channel heights between 2 and 4 nanometers, transport is insensitive to molecule charge.

Nanopore-Based Electrochemiluminescence for Detection of MicroRNAs via Duplex-Specific Nuclease-Assisted Target Recycling

In this study, we proposed a nanopore-based electrochemiluminescence (ECL) sensor combined with duplex-specific nuclease (DSN)-assisted target recycling amplification to detect microRNAs. Because of the synergetic effect of electrostatic repulsion and volume exclusion of gold nanoparticle-labeled DNA capture (DNA-Au NPs) to the negatively charged luminol anion probe, the DNA-Au NP-modified anodized aluminum oxide (AAO) nanopore electrode exhibited high ECL decline in comparison with the bare AAO electrode. Upon the introduction of DSN and target microRNA, the specific DNA-RNA binding and enzyme cleaving could trigger the detachment of capture DNA from the membrane surface, resulting in uncapping of AAO and an increased ECL signal. For comparison, positively charged Ru(bpy)₃²⁺ was used as the ECL probe instead of luminol. Because the electrostatic attraction effect between DNA and Ru(bpy)₃²⁺ is partially offset by the volume exclusion effect of Au NPs, the AAO electrode modified with only DNA capture is more suitable for the Ru(bpy)₃²⁺ case. In our experiment, the case of negatively charged luminol combined with the synergetic effect of electrostatic repulsion and volume exclusion of DNA-Au NPs provides a quantitative readout proportional to the target microRNA concentration in the range of 1.0 fM to 1.0 nM, with a lower detection limit of 1 fM.

Sequential Vapor Infiltration Treatment Enhances the Ionic Current Rectification Performance of Composite Membranes Based on Mesoporous Silica Confined in Anodic Alumina

Ionic current rectification of nanofluidic diode membranes has been studied widely in recent years because it is analogous to the functionality of biological ion channels in principle. We report a new method to fabricate ionic current rectification membranes based on mesoporous silica confined in anodic aluminum oxide (AAO) membranes. Two types of mesostructured silica nanocomposites, hexagonal structure and nanoparticle stacked structure, were used to asymmetrically fill nanochannels of AAO membranes by a vapor-phase synthesis (VPS) method with aspiration approach and were further modified via sequence vapor infiltration (SVI) treatment. The ionic current measurements indicated that SVI treatment can modulate the asymmetric ionic transport in prepared membranes, which exhibited clear ionic current rectification phenomenon under optimal conditions. The ionic current rectifying behavior is derived from the asymmetry of surface conformations, silica species components, and hydrophobic wettability, which are created by the asymmetrical filling type, silica depositions on the heterogeneous membranes, and the condensation of silanol groups. This article provides a considerable strategy to fabricate composite membranes with obvious ionic current rectification performance via the cooperation of the VPS method and SVI treatment and opens up the potential of mesoporous silica confined in AAO membranes to mimic fluid transport in biological processes.

Simple and Versatile Detection of Viruses Using Anodized Alumina Membranes

A simple sensor for viral particles based on ionic conductivity through anodized alumina membranes was demonstrated using MS2 bacteriophage as an example. A facile two-point measuring scheme is geared toward realization using a computer's sound card input/output capabilities suitable for a fast and inexpensive point of care testing. The lowest detection concentration down to ~7 pfu/mL and a large dynamic range up to ~2000 pfu/mL were obtained due to physical optimization that included proper length and diameter for the pores, removing the oxide layer at the electrode, as well as the chemical optimization of covalent binding of antibodies to the pore's walls.

Enhanced Stability and Controllability of an Ionic Diode Based on Funnel-Shaped Nanochannels with an Extended Critical Region

The enhanced stability and controllability of an ionic diode system based on funnel-shaped nanochannels with a much longer critical region is reported. The polarity of ion transport switching from anion/cation-selective to ambipolar can be controlled by tuning the length and charge of the critical region. This nanofluidic structure anticipates potential applications in single-molecule biosensing, water resource monitoring, and healthcare.

Investigation of proton-driven amine functionalized tube array as ion responsive biomimetic nanochannels

A simple amine embellished tube array was assembled at the liquid–liquid interface to study ion transfer behavior.

Bioinspired Smart Gate-Location-Controllable Single Nanochannels: Experiment and Theoretical Simulation

pH-activated gates intelligently govern the ion transport behaviors of a wide range of bioinspired ion channels, but the mechanisms between the gate locations and the functionalities of the ion channels remain poorly understood. Here, we construct an artificial gate-location-tunable single-nanochannel system to systematically investigate the impact of the gate location on the ion transport property of the biomimetic ion channel. The gate-location-controllable single nanochannels are prepared by asymmetrically grafting pH-responsive polymer gates on one side of single nanochannels with gradual shape transformation. Experimental ion current measurements show that the gating abilities and rectification effects of the pH-gated nanochannels can be gradually altered by precisely locating the artificial pH gates on the different sites of the channels. The experimental gate-location-dependent gating and rectification of ion current in the bioinspired ion channel system is further well confirmed by theoretical simulation. This work, as an example, provides a new avenue to optimize the smart ion transport features of diverse artificial nanogate devices via precisely locating the gates on the appropriate sites of the artificial nanochannels.

Ultrathin Silica Membranes with Highly Ordered and Perpendicular Nanochannels for Precise and Fast Molecular Separation

Membranes with the ability of molecular/ionic separation offer potential in many processes ranging from molecular purification/sensing, to nanofluidics and to mimicking biological membranes. In this work, we report the preparation of a perforative free-standing ultrathin silica membrane consisting of straight and parallel nanochannels with a uniform size (∼2.3 nm) for precise and fast molecular separation. Due to its small and uniform channel size, the membrane exhibits a precise selectivity toward molecules based on size and charge, which can be tuned by ionic strength, pH or surface modification. Furthermore, the ultrasmall thickness (10-120 nm), vertically aligned channels, and high porosity (4.0 × 10(12) pores cm(-2)) give rise to a significantly high molecular transport rate. In addition, the membrane also displays excellent stability and can be consecutively reused for a month after washing or calcination. More importantly, the membrane fabrication is convenient, inexpensive, and does not rely on sophisticated facilities or conditions, providing potential applications in both separation science and micro/nanofluidic chip technologies.

Ionic Transport through Chemically Functionalized Hydrogen Peroxide-Sensitive Asymmetric Nanopores

We describe the fabrication of a chemical-sensitive nanofluidic device based on asymmetric nanopores whose transport characteristics can be modulated upon exposure to hydrogen peroxide (H2O2). We show experimentally and theoretically that the current-voltage curves provide a suitable method to monitor the H2O2-mediated change in pore surface characteristics from the electronic readouts. We demonstrate also that the single pore characteristics can be scaled to the case of a multipore membrane whose electric outputs can be readily controlled. Because H2O2 is an agent significant for medical diagnostics, the results should be useful for sensing nanofluidic devices.

Cooperative effect of pH-dependent ion transport within two symmetric-structured nanochannels

A novel and simple design is introduced to construct bichannel nanofluid diodes by combining two poly(ethylene terephthalate) (PET) films with columnar nanochannel arrays varying in size or in surface charge. This type of bichannel device performs obvious ion current rectification, and the pH-dependent tunability and degree of rectification can be improved by histidine modification. The origin of the ion current rectification and its pH-dependent tunability are attributed to the cooperative effect of the two columnar half-channels and the applied bias on the mobile ions. As a result of surface groups on the bichannel being charged with different polarities or degrees at different pH values, the function of the bichannel device can be converted from a nanofluid diode to a normal nanochannel or to a reverse diode.

Nanopore-based DNA-probe sequence-evolution method unveiling characteristics of protein-DNA binding phenomena in a nanoscale confined space

Almost all of the important functions of DNA are realized by proteins which interact with specific DNA, which actually happens in a limited space. However, most of the studies about the protein-DNA binding are in an unconfined space. Here, we propose a new method, nanopore-based DNA-probe sequence-evolution (NDPSE), which includes up to 6 different DNA-probe systems successively designed in a nanoscale confined space which unveil the more realistic characteristics of protein-DNA binding phenomena. There are several features; for example, first, the edge-hindrance and core-hindrance contribute differently for the binding events, and second, there is an equilibrium between protein-DNA binding and DNA-DNA hybridization.

Bio-inspired smart single asymmetric hourglass nanochannels for continuous shape and ion transport control

Inspired by biological asymmetric ion channels, new shape-tunable and pH-responsive asymmetric hourglass single nanochannel systems demonstrate unique ion-transport properties. It is found that the change in shape and pH cooperatively control the ion transport within the nanochannel ranging from asymmetric shape with asymmetric ion transport, to asymmetric shape with symmetric ion transport and symmetric shape with symmetric ion transport.

Quantitative detection of potassium ions and adenosine triphosphate via a nanochannel-based electrochemical platform coupled with G-quadruplex aptamers

The development of synthetic nanopores and nanochannels that mimick ion channels in living organisms for biosensing applications has been, and still remains, a great challenge. Although the biological applications of nanopores and nanochannels have achieved considerable development as a result of nanotechnology advancements, there are few reports of a facile way to realize those applications. Herein, a nanochannel-based electrochemical platform was developed for the quantitative detection of biorelated small molecules such as potassium ions (K(+)) and adenosine triphosphate (ATP) in a facile way. For this purpose, K(+) or ATP G-quadruplex aptamers were covalently assembled onto the inner wall of porous anodic alumina (PAA) nanochannels through a Schiff reaction between -CHO groups in the aptamer and amino groups on the inner wall of the PAA nanochannels under mild reaction conditions. Conformational switching of the aptamers confined in the nanochannels occurs in the presence of the target molecules, resulting in increased steric hindrance in the nanochannels. Changes in steric hindrance in the nanochannels were monitored by the anodic current of indicator molecules transported through the nanochannels. As a result, quantitative detection of K(+) and ATP was realized with a concentration ranging from 0.005 to 1.0 mM for K(+) and 0.05 to 10.0 mM for ATP. The proposed platform displayed significant selectivity, good reproducibility, and universality. Moreover, this platform showed its potential for use in the detection of other aptamer-based analytes, which could promote its development for use in biological detection and clinical diagnosis.

Artificial ion channels regulating light-induced ionic currents in photoelectrical conversion systems

Artificial ion channels are introduced into a photosystem II photoelectrical conversion system to mimic the photocurrent regulating of the natural PSII energy system on the thylakoid membrane. In the composite system, PSII complexes act as pumps to convert light into currents and artificial ion channels act as valves to regulate light-induced ionic currents.

Sensitive assay of protease activity on a micro/nanofluidics preconcentrator fused with the fluorescence resonance energy transfer detection technique

A fast and sensitive assay of protease activity on a micro/nanofluidics preconcentrator combining with fluorescence resonance energy transfer (FRET) detection technique has been developed in a homogeneous real-time format. First, the functionalized nanoprobes are formed by loading dye labeled protein onto gold nanoparticles (AuNPs), in which, the photoluminescence of donor dye was strongly quenched by AuNPs due to FRET mechanisms. For protease activity assay, the nanoprobes are enriched by a micro/nanofluidics preconcentrator. When the target protease is transported to the enriched nanoprobes, cleavage of protein occurs as a consequence of molecular recognition of enzyme to substrate. The release of cleavage fragments from AuNPs nanoprobes leads to the enhancement of fluorescence and enables the protease activity assay on the micro/nanofluidics chip. As a demonstration, digestion of fluorescein isothiocyanate labeled dog serum albumin (FITC-DSA) by trypsin was used as a model reaction. Because of the highly efficient preconcentration and space confinement effect, significantly increased protein cleavage rate and protease assay sensitivity can be achieved with enhanced enzyme activity. The present micro/nanofluidics platform fused with the FRET detection technique is promising for fast and sensitive bioanalysis such as immunoassay, DNA hybridization, drug discovery, and clinical diagnosis.

Anomalous effects of water flow through charged nanochannel membranes

Anomalous osmosis may be observed in a suitable concentration range when the directions of concentration diffusion and induced electroosmosis are opposite.

Differential adsorption of small molecules in spatially functionalized porous silicon nanostructures

An experimental approach to rapidly quantify the relative affinity of a small molecule analyte for two different surfaces is described. The method uses optical measurements of high surface area porous Si thin films that contain two spatially distinct surface chemistries. The chemistries are placed on the walls of the ∼10 nm diameter pores of the porous Si film by means of microdroplet patterning, where a chemical resist is drop-coated on the porous Si sample to define distinct regions across the plane of the chip. In this work, the two chemistries consist of a hydrophilic silicon oxide surface and a hydrophobic methyl-terminated silicon surface. Detection is achieved by simultaneous optical reflectance measurements of both regions, where the reflectance spectrum contains a convolution of the Fabry-Pérot interference spectrum of both the oxide and the methyl-grafted layers. The differential partitioning of a test analyte (2-acetoxybenzoic acid or diphenyl ether) from aqueous solution is determined from the Fourier transform of the optical interference spectrum. The approach is rapid and nondestructive, and it can be performed on a small sample volume as a means to quantify the partition behavior of small molecules.

Rapid protein concentration, efficient fluorescence labeling and purification on a micro/nanofluidics chip

Fluorescence analysis has proved to be a powerful detection technique for achieving single molecule analysis. However, it usually requires the labeling of targets with bright fluorescent tags since most chemicals and biomolecules lack fluorescence. Conventional fluorescence labeling methods require a considerable quantity of biomolecule samples, long reaction times and extensive chromatographic purification procedures. Herein, a micro/nanofluidics device integrating a nanochannel in a microfluidics chip has been designed and fabricated, which achieves rapid protein concentration, fluorescence labeling, and efficient purification of product in a miniaturized and continuous manner. As a demonstration, labeling of the proteins bovine serum albumin (BSA) and IgG with fluorescein isothiocyanate (FITC) is presented. Compared to conventional methods, the present micro/nanofluidics device performs about 10(4)-10(6) times faster BSA labeling with 1.6 times higher yields due to the efficient nanoconfinement effect, improved mass, and heat transfer in the chip device. The results demonstrate that the present micro/nanofluidics device promises rapid and facile fluorescence labeling of small amount of reagents such as proteins, nucleic acids and other biomolecules with high efficiency.

A nanochannel array based device for determination of the isoelectric point of confined proteins

A nanochannel array based nanodevice can mimic the biological environments and thus unveil the natural properties, conformation and recognition information of biomolecules such as proteins and DNA in confined spaces. Here we report that porous anodic alumina (PAA) of a highly parallel nanochannel array covalently modified with proteins significantly modulates the transport of a negatively charged probe of ferricyanide due to the electrostatic interactions between the probes and modified nanochannel inner surface. Results show that such electrostatic interaction exists in a wide range of ionic strength from 1 mM to 100 mM in 20 nm nanochannels modified with proteins (hemoglobin, bovine serum albumin, and goat anti-rabbit IgG secondary antibody). In addition, the maximal steady-state flux of the charged probe through the modified nanochannel array is directly related to the ionic strength which determines the electric double layer thickness and solution pH which modulates the nanochannel surface charge. Thus, the modulated mass transport of the probe by solution pH can be used to study the charge properties of the immobilized proteins in nanochannel confined conditions, leading us to obtain the isoelectric point (pI) of the proteins confined in nanochannels. The determined pI values of two known proteins of hemoglobin and bovine serum albumin are close to the ones of the same proteins covalently modified on a 3-mercaptopropionic acid self-assembled monolayer/gold electrode. In addition, the pI of an unknown protein of goat anti-rabbit IgG secondary antibody confined in nanochannels was determined to be 6.3. Finally, the confinement effect of nanochannels on the charge properties of immobilized proteins has been discussed.

Modulating molecular and nanoparticle transport in flexible polydimethylsiloxane membranes

The ability to fabricate flexible filtration membranes that can selectively separate particles of different sizes is of considerable interest. In this article, we describe a facile, reproducible and simple one-step method to produce pores in polydimethylsiloxane (PDMS) membranes. We embedded micron-sized NaHCO(3) particles in 50 micron thick PDMS films. After curing, the membranes were immersed in concentrated HCl acid. Pores were generated in the membrane by the evolution of CO(2) gas from the reaction of NaHCO(3) and HCl. High resolution Scanning Electron Microscope images clearly reveal the presence of openings on the surface and the cross-section of the membranes. Fluorescence and back-scattered electron imaging of porous PDMS membrane with embedded gold nanoparticles and comparison with non-porous PDMS membranes provided unambiguous evidence of pores in the membrane. Transport studies of molecular fluoresceinate ions, ions (sodium and chloride) and 240 nm polystyrene nanoparticles through these membranes demonstrate passable pores and existence of channels within the body of the membrane. Mechanically stretching the porous PDMS membrane and comparing the flow rates of fluoresceinate ions and the polystyrene beads through the stretched and unstretched membranes allowed a direct proof of the modulation of transport rate in the membranes. We show that stretching the membranes by 10% increases the flow rate of fluorescein molecules by 2.8 times and by a factor of approximately ~40% for the polystyrene nanoparticles.