Gold nanoparticles presenting hybridized self-assembled aptamers that exhibit enhanced inhibition of thrombin

Carbonization of quercetin into nanogels: a leap in anticoagulant development

Quercetin, a flavonoid abundantly found in onions, fruits, and vegetables, is recognized for its pharmacological potential, especially for its anticoagulant properties that work by inhibiting thrombin and coagulation factor Xa. However, its clinical application is limited due to poor water solubility and bioavailability. To address these limitations, we engineered carbonized nanogels derived from quercetin (CNGsQur) using controlled pyrolysis and polymerization techniques. This led to substantial improvements in its anticoagulation efficacy, water solubility, and biocompatibility. We generated a range of CNGsQur by subjecting quercetin to varying pyrolytic temperatures and then assessed their anticoagulation capacities both in vitro and in vivo. Coagulation metrics, including thrombin clotting time (TCT), activated partial thromboplastin time (aPTT), and prothrombin time (PT), along with a rat tail bleeding assay, were utilized to gauge the efficacy. CNGsQur showed a pronounced extension of coagulation time compared to uncarbonized quercetin. Specifically, CNGsQur synthesized at 270 °C (CNGsQur270) exhibited the most significant enhancement in TCT, with a binding affinity to thrombin exceeding 400 times that of quercetin. Moreover, variants synthesized at 310 °C (CNGsQur310) and 290 °C (CNGsQur290) showed the most substantial delays in PT and aPTT, respectively. Our findings indicate that the degree of carbonization significantly influences the transformation of quercetin into various CNGsQur forms, each affecting distinct coagulation pathways. Additionally, both intravenous and oral administrations of CNGsQur were found to extend rat tail bleeding times by up to fivefold. Our studies also demonstrate that CNGsQur270 effectively delays and even prevents FeCl3-induced vascular occlusion in a dose-dependent manner in mice. Thus, controlled pyrolysis offers an innovative approach for generating quercetin-derived CNGs with enhanced anticoagulation properties and water solubility, revealing the potential for synthesizing self-functional carbonized nanomaterials from other flavonoids for diverse biomedical applications.

Biosynthesis, characterization, and anticoagulant properties of copper nanoparticles from red seaweed of Acanthophora sp

INTRODUCTION

In the last few decades, nanoparticles have found extensive use in a variety of biological applications. Traditional medicine widely uses Acanthophora sp., a marine macroalgae, to cure and prevent diabetes, skin disorders, and blood clotting.

OBJECTIVE

The present study aims to investigate whether green-synthesized copper nanoparticles (CuNPs) might work as an anticoagulant.

METHODOLOGY

The CuNPs were made using an environmentally friendly method that uses Acanthophora extract. We used UV-vis spectroscopy to assess the surface plasmon resonance of the material, scanning electron microscopy (SEM) to analyze its form, and energy dispersive X-ray (EDX) spectroscopy to identify the material's constituent elements. Furthermore, Fourier-transform infrared (FT-IR) determined the functional groups of the CuNPs.

RESULTS

The biosynthesis of CuNPs was confirmed by UV-vis spectroscopy, which showed a surface plasmon resonance peak at 570 nm. The FT-IR analysis showed that certain functional groups are involved in the formation of CuNPs. These groups include OH stretching, C=O stretching, C-H bonding, C-N bonding, and Cu vibration. SEM analysis demonstrated the morphology of CuNPs synthesized, with a size of 0.5 μm, while EDS analysis confirmed their purity. The anticoagulant activity of prothrombin time (PT) and activated partial thromboplastin time (aPTT) assays showed that the clotting time got longer depending on the concentration. The CuNPs synthesized from Acanthophora had strong anticoagulant effects at 100 μg/mL, further suggesting that they might be useful as a natural blood thinner.

CONCLUSION

The interesting thing we observed is that the green-synthesized CuNPs made from Acanthophora extract could be used in anticoagulation therapy.

Aptamer-Protein Interactions: From Regulation to Biomolecular Detection

Serving as the basis of cell life, interactions between nucleic acids and proteins play essential roles in fundamental cellular processes. Aptamers are unique single-stranded oligonucleotides generated by in vitro evolution methods, possessing the ability to interact with proteins specifically. Altering the structure of aptamers will largely modulate their interactions with proteins and further affect related cellular behaviors. Recently, with the in-depth research of aptamer-protein interactions, the analytical assays based on their interactions have been widely developed and become a powerful tool for biomolecular detection. There are some insightful reviews on aptamers applied in protein detection, while few systematic discussions are from the perspective of regulating aptamer-protein interactions. Herein, we comprehensively introduce the methods for regulating aptamer-protein interactions and elaborate on the detection techniques for analyzing aptamer-protein interactions. Additionally, this review provides a broad summary of analytical assays based on the regulation of aptamer-protein interactions for detecting biomolecules. Finally, we present our perspectives regarding the opportunities and challenges of analytical assays for biological analysis, aiming to provide guidance for disease mechanism research and drug discovery.

Portable and quantitative detection of carbendazim based on the readout of a thermometer

The detection of carbendazim (CBZ) is important for food safety and human health. However, most current analytical methods require large instruments and highly trained operators. In order to solve this problem, herein, an innovative portable and quantitative photothermal assay platform relying on a thermometer readout for the detection of CBZ has been developed. Gold nanoparticles (AuNPs), which exhibit a strong distance-dependent photothermal effect under specific laser irradiation, were utilized as indicators. The CBZ aptamer was introduced to protect AuNPs from salt-mediated aggregation. When CBZ is present, the binding event between CBZ and aptamer leads to the loss of the aptamer protective effect on AuNPs, and AuNP aggregation occurs. Under 650-nm laser irradiation, the increase in temperature associated with an AuNP-dependent photothermal effect is highly related to the CBZ concentration. Having the advantages of user-friendliness, low cost, quick response, and portability, this method has great potential for on-site applications.

Dimeric and Multimeric DNA Aptamers for Highly Effective Protein Recognition

Multivalent interactions frequently occur in biological systems and typically provide higher binding affinity and selectivity in target recognition than when only monovalent interactions are operative. Thus, taking inspiration by nature, bivalent or multivalent nucleic acid aptamers recognizing a specific biological target have been extensively studied in the last decades. Indeed, oligonucleotide-based aptamers are suitable building blocks for the development of highly efficient multivalent systems since they can be easily modified and assembled exploiting proper connecting linkers of different nature. Thus, substantial research efforts have been put in the construction of dimeric/multimeric versions of effective aptamers with various degrees of success in target binding affinity or therapeutic activity enhancement. The present review summarizes recent advances in the design and development of dimeric and multimeric DNA-based aptamers, including those forming G-quadruplex (G4) structures, recognizing different key proteins in relevant pathological processes. Most of the designed constructs have shown improved performance in terms of binding affinity or therapeutic activity as anti-inflammatory, antiviral, anticoagulant, and anticancer agents and their number is certainly bound to grow in the next future.

Functionalized DNA-spider silk nanohydrogels for controlled protein binding and release

Hydrogels are excellent scaffolds to accommodate sensitive enzymes in a protective environment. However, the lack of suitable immobilization techniques on substrates and the lack of selectivity to anchor a biocatalyst are major drawbacks preventing the use of hydrogels in bioanalytical devices. Here, nanofilm coatings on surfaces were made of a recombinant spider silk protein (rssp) to induce rssp self-assembly and thus the formation of fibril-based nanohydrogels. To functionalize spider silk nanohydrogels for bioselective binding of proteins, two different antithrombin aptamers were chemically conjugated with the rssp, thereby integrating the target-binding function into the nanohydrogel network. Human thrombin was selected as a sensitive model target, in which the structural integrity determines its activity. The chosen aptamers, which bind various exosites of thrombin, enabled selective and cooperative embedding of the protein into the nanohydrogels. The change of the aptamer secondary structure using complementary DNA sequences led to the release of active thrombin and confirmed the addressable functionalization of spider silk nanohydrogels.

Fine-tuning the properties of the thrombin binding aptamer through cyclization: Effect of the 5'-3' connecting linker on the aptamer stability and anticoagulant activity

A small library of cyclic TBA analogues (named cycTBA I-IV), obtained by covalently connecting its 5'- and 3'-ends with flexible linkers, has been synthesized with the aim of improving its chemical and enzymatic stability, as well as its anticoagulant properties. Two chemical procedures have been exploited to achieve the desired cyclization, based on the oxime ligation method (providing cycTBA I and II) or on Cu(I)-assisted azide-alkyne cycloaddition (CuAAC) protocols (for cycTBA III and IV), leading to analogues containing circularizing linkers with different chemical nature and length, overall spanning from 22 to 48 atoms. The resulting cyclic TBAs have been characterized using a variety of biophysical methods (UV, CD, gel electrophoresis, SE-HPLC analyses) and then tested for their serum resistance and anticoagulant activity under in vitro experiments. A fine-tuning of the length and flexibility of the linker allowed identifying a cyclic analogue, cycTBA II, with improved anticoagulant activity, associated with a dramatically stabilized G-quadruplex structure (ΔT_m = +17 °C) and a 6.6-fold higher enzymatic resistance in serum compared to unmodified TBA.

Stability Is Not Everything: The Case of the Cyclisation of a Thrombin-Binding Aptamer

With the aim of developing a new approach to obtain improved aptamers, a cyclic thrombin-binding aptamer (TBA) analogue (cycTBA) has been prepared by exploiting a copper(I)-assisted azide-alkyne cycloaddition. The markedly increased serum resistance and exceptional thermal stability of the G-quadruplex versus TBA were associated with halved thrombin inhibition, which suggested that some flexibility in the TBA structure was necessary for protein recognition.

Direct Measurement of Through-Bond Effects in Molecular Multivalent Interactions

Multivalent interactions occur throughout biology, and have a number of characteristics that monovalent interactions do not. However, it remains challenging to directly measure the binding force of molecular multivalent interactions and identify the mechanism of interactions. In this study, the specific interaction between bivalent aptamer and thrombin has been measured directly and quantitatively by force-induced remnant magnetization spectroscopy to investigate the binding force and through-bond effects of the multivalent interactions. The measured differential binding forces enable through-bond effects in thrombin-aptamer complexes to be identified, where aptamer binding at exosite II produces visible effects on their binding at exosite I and vice versa. This method might be suitable for practical applications in the design of high-performance ligands.

Inhibition of thrombin by functionalized C60 nanoparticles revealed via in vitro assays and in silico studies

The studies on the human toxicity of nanoparticles (NPs) are far behind the rapid development of engineered functionalized NPs. Fullerene has been widely used as drug carrier skeleton due to its reported low risk. However, different from other kinds of NPs, fullerene-based NPs (C₆₀ NPs) have been found to have an anticoagulation effect, although the potential target is still unknown. In the study, both experimental and computational methods were adopted to gain mechanistic insight into the modulation of thrombin activity by nine kinds of C₆₀ NPs with diverse surface chemistry properties. In vitro enzyme activity assays showed that all tested surface-modified C₆₀ NPs exhibited thrombin inhibition ability. Kinetic studies coupled with competitive testing using 3 known inhibitors indicated that six of the C₆₀ NPs, of greater hydrophobicity and hydrogen bond (HB) donor acidity or acceptor basicity, acted as competitive inhibitors of thrombin by directly interacting with the active site of thrombin. A simple quantitative nanostructure-activity relationship model relating the surface substituent properties to the inhibition potential was then established for the six competitive inhibitors. Molecular docking analysis revealed that the intermolecular HB interactions were important for the specific binding of C₆₀ NPs to the active site canyon, while the additional stability provided by the surface groups through van der Waals interaction also play a key role in the thrombin binding affinity of the NPs. Our results suggest that thrombin is a possible target of the surface-functionalized C₆₀ NPs relevant to their anticoagulation effect.

Micellar Thrombin-Binding Aptamers: Reversible Nanoscale Anticoagulants

Aptamers are nucleic acid-based ligands that exhibit promising features including specific and reversible target binding and inhibition. Aptamers can function as anticoagulants if they are directed against enzymes of the coagulation cascade. However, they typically suffer from nucleolytic digestion and fast clearance from the bloodstream. We present thrombin-binding aptamer amphiphiles that self-assemble into nanoscale polymeric micelles with a densely functionalized aptamer-displaying corona. We show that these micellar aptamers retain their native secondary structure in a crowded environment and are stabilized against degradation by nucleases in human serum. Moreover, they are effective inhibitors of human plasma clotting in vitro. The inhibitory effect can be rapidly reversed by complementary nucleic acids that break the aptamers' secondary structure upon hybridization. Compared to free aptamers, the increased molecular weight and size of the overall assembly promotes extended blood circulation times in vivo.

Fluorescent Thrombin Binding Aptamer-Tagged Nanoparticles for an Efficient and Reversible Control of Thrombin Activity

Progress in understanding and treatment of thrombotic diseases requires new effective methods for the easy, rapid, and reversible control of coagulation processes. In this framework, the use of aptamers, and particularly of the thrombin binding aptamer (TBA), has aroused strong interest, due to its enormous therapeutic potential, associated with a large number of possible applications in biotechnological and bioanalytical fields. Here, we describe a new TBA analogue (named tris-mTBA), carrying three different pendant groups: a dansyl residue at the 3'- and a β-cyclodextrin moiety at the 5'-end-providing a host-guest system which exhibits a marked fluorescence enhancement upon TBA G-quadruplex folding-and a biotin tag, allowing the attachment of the aptamer onto biocompatible streptavidin-coated silica nanoparticles (NPs) of 50 nm hydrodynamic diameter (Sicastar). The use of nanoparticles for the in vivo delivery of TBA, expected to induce per se increased nuclease resistance and improved pharmacokinetic properties of this oligonucleotide, offers as an additional advantage the possibility to exploit multivalency effects, due to the presence of multiple copies of TBA on a single scaffold. In addition, the selected fluorescent system allows monitoring both the presence of TBA on the functionalized NPs and its correct folding upon immobilization, also conferring enhanced enzymatic resistance and bioactivity. The anticoagulant activity of the new tris-mTBA, free or conjugated to Sicastar NPs, was evaluated by dynamic light scattering experiments. Highly effective and reversible inhibition of thrombin activity toward fibrinogen was found for the free tris-mTBA and especially for the tris-mTBA-conjugated NPs, demonstrating great potential for the biomedical control of blood clotting.

Paper wasp nest-mediated biosynthesis of silver nanoparticles for antimicrobial, catalytic, anticoagulant, and thrombolytic applications

Biosynthesis of silver nanoparticles (AgNPs) using nest extract of paper wasp (Polistes sp) was investigated in this work. The AgNPs were characterized by UV–Vis spectroscopy, Fourier transform infrared spectroscopy (FTIR), and transmission electron microscopy (TEM), and evaluated for antibacterial, antifungal, dye degradation, blood anticoagulation, and blood clot dissolution (thrombolytic) activities. The crystalline polydispersed AgNPs with size range of 12.5–95.55 nm absorbed maximally at 428 nm and showed anisotropic structures of sphere, triangle, hexagon, rod, and rhombus. The FTIR data showed prominent peaks at 3426 and 1641 cm⁻¹, which indicate the involvement of phenolics compounds and proteins in the synthesis of AgNPs. The prominence of Ag in the EDX spectra showed that indeed, AgNPs were formed. The AgNPs showed potent antibacterial activities (12–35 mm) against three multi-drug strains of Pseudomonas aeruginosa and Klebsiella granulomatis. While the growth of Aspergillus flavus and Aspergillus niger was completely suppressed, the AgNPs produced growth inhibition of 75.61 % against Aspergillus fumigatus at 100 µg/ml. Furthermore, the AgNPs degraded malachite green to the tune of 93.1 %. The AgNPs also prevented coagulation of blood, while it completely dissolved preformed blood clots within 5 min showing the potent anticoagulation and thrombolytic activities. This study, which is the first of its kind to use nest extract of paper wasp for the synthesis of nanoparticles, has shown that the biosynthesized AgNPs could be deployed for biomedical and catalytic applications.

Biomedical Applications of DNA-Conjugated Gold Nanoparticles

Gold nanoparticles (AuNPs) are useful for diagnostic and biomedical applications, mainly because of their ease in preparation and conjugation, biocompatibility, and size-dependent optical properties. However, bare AuNPs do not possess specificity for targets. AuNPs conjugated with DNA aptamers offer specificity for various analytes, such as proteins and small molecules/ions. Although DNA aptamers themselves have therapeutic and target-recognizing properties, they are susceptible to degradation in vivo. When DNA aptamers are conjugated to AuNPs, their stability and cell uptake efficiency both increase, making aptamer-AuNPs suitable for biomedical applications. Additionally, drugs can be efficiently conjugated with DNA aptamer-AuNPs to further enhance their therapeutic efficiency. This review focuses on the applications of DNA aptamer-based AuNPs in several biomedical areas, including anticoagulation, anticancer, antibacterial, and antiviral applications.

Aptamer-conjugated polymeric nanoparticles for the detection of cancer cells through "turn-on" retro-self-quenched fluorescence

We have developed a simple, sensitive, and rapid fluorescence assay for the detection of cancer cells, based on "turn-on" retro-self-quenched fluorescence inside the cells. 1,3-Phenylenediamine resin (DAR) nanoparticles (NPs) containing rhodamine 6G (R6G) are conjugated with aptamer (apt) sgc8c to prepare sgc8c-R6GDAR NPs, while that containing rhodamine 101 (R101) are conjugated with TD05 for the preparation of TD05-R101DAR NPs. The sgc8c-R6GDAR and TD05-R101DAR NPs separately recognize CCRF-CEM and Ramos cells. The fluorescence intensities of the two apt-DAR NPs are both weak due to self-quenching, but they increase inside the cells as a result of release of the fluorophores from the apt-DAR NPs. The apt-DAR NPs' structure becomes less compact at low pH value, leading to the release of the fluorophores. The sgc8c-R6GDAR and TD05-R101DAR NPs allow detection of as low as 44 CCRF-CEM cells and 79 Ramos cells mL(-1), respectively, using a commercial reader within 10 min. Practicality of the two probes have been validated by the quantitation and identification of CCRF-CEM and Ramos cells spiked in blood samples through conventional fluorescence and flow cytometry analysis, with advantages of sensitivity, selectivity, and rapidity.

Self-titrating anticoagulant nanocomplexes that restore homeostatic regulation of the coagulation cascade

Antithrombotic therapy is a critical portion of the treatment regime for a number of life-threatening conditions, including cardiovascular disease, stroke, and cancer; yet, proper clinical management of anticoagulation remains a challenge because existing agents increase the propensity for bleeding in patients. Here, we describe the development of a bioresponsive peptide-polysaccharide nanocomplex that utilizes a negative feedback mechanism to self-titrate the release of anticoagulant in response to varying levels of coagulation activity. This nanoscale self-titrating activatable therapeutic, or nanoSTAT, consists of a cationic thrombin-cleavable peptide and heparin, an anionic polysaccharide and widely used clinical anticoagulant. Under nonthrombotic conditions, nanoSTATs circulate inactively, neither releasing anticoagulant nor significantly prolonging bleeding time. However, in response to life-threatening pulmonary embolism, nanoSTATs locally release their drug payload and prevent thrombosis. This autonomous negative feedback regulator may improve antithrombotic therapy by increasing the therapeutic window and decreasing the bleeding risk of anticoagulants.

Sensitive detection of platelet-derived growth factor through surface-enhanced Raman scattering

A surface-enhanced Raman scattering (SERS) assay using two different nanomaterials has been demonstrated for highly sensitive and selective detection of platelet-derived growth factor (PDGF). Gold nanoparticles (Au NPs; 13 nm) are conjugated with aptamer (Apt) and 4-mercaptobenzoic acid (MBA) as the recognition element and reporter, respectively, while Au pearl necklace nanomaterials (Au PNNs) are used for generating reproducible and enhanced SERS signal of 4-MBA. The Apt/MBA-Au NPs bind PDGF through a specific interaction between Apt and PDGF in a fashion of 2:1, leading to concentration of the analyte and removal of the sample matrix. Through electrostatic interaction, the PDGF-Apt/MBA-Au NPs complexes form aggregates with Au PNNs, leading to an enhanced Raman signal of 4-MBA. Au PNNs allow enhancement factors up to 1.3 × 10(7) and relative standard deviations of Raman signals for 4-MBA down to 15% (five measurements). The assay allows detection of PDGF BB down to 0.5 pM, with linearity of the Raman signal of 4-MBA against the concentration of PDGF over 1-50 pM. Having advantages of sensitivity and reproducibility, this assay has been further applied for the determination of the concentration of PDGF in urine samples, showing its great potential for ultrasensitive analysis of target proteins in biological samples.

Nanoparticles and the blood coagulation system. Part I: benefits of nanotechnology

Nanotechnology is proven to provide certain benefits in drug delivery by improving solubility, increasing uptake to target sites and changing pharmacokinetics profiles of traditional drugs. Since properties of many materials change tremendously at the nanoscale levels, nanotechnology is also being explored in various industrial applications. As such, nanoparticles are rapidly entering various areas of industry, biology and medicine. The benefits of using nanotechnology for industrial and biomedical applications are often tempered by concerns about the safety of these new materials. One such area of concern includes their effect on the immune system. While nanoparticle interactions with various constituents of the immune system have been reviewed before, little attention was given to nanoparticle effects on the blood coagulation system. Nanoparticle interface with the blood coagulation system may lead to either benefits to the host or adverse reactions. This article reviews recent advances in our understanding of nanoparticle interactions with plasma coagulation factors, platelets, endothelial cells and leukocytes. Part I is focused on desirable interactions between nanoparticles and the coagulation system, and discusses benefits of using nanotechnology to intervene in coagulation disorders. Undesirable interactions posing safety concerns are covered in part II, which will be published in the June issue of Nanomedicine.

Oxidation of gold clusters by thiols

The formation of gold-thiolate nanoparticles via oxidation of gold clusters by thiols is examined in this work. Using the BP86 density functional with a triple ζ basis set, the adsorption of methylthiol onto various gold clusters Aun(Z) (n = 1-8, 12, 13, 20; Z = 0, -1, +1) and Au38(4+) is investigated. The rate-limiting step for the reaction of one thiol with the gold cluster is the dissociation of the thiol proton; the resulting hydrogen atom can move around the gold cluster relatively freely. The addition of a second thiol can lead to H2 formation and the generation of a gold-thiolate staple motif.

Carbohydrate-DNA interactions at G-quadruplexes: folding and stability changes by attaching sugars at the 5'-end

Quadruplex DNA structures are attracting an enormous interest in many areas of chemistry, ranging from chemical biology, supramolecular chemistry to nanoscience. We have prepared carbohydrate-DNA conjugates containing the oligonucleotide sequences of G-quadruplexes (thrombin binding aptamer (TBA) and human telomere (TEL)), measured their thermal stability and studied their structure in solution by using NMR and molecular dynamics. The solution structure of a fucose-TBA conjugate shows stacking interactions between the carbohydrate and the DNA G-tetrad in addition to hydrogen bonding and hydrophobic contacts. We have also shown that attaching carbohydrates at the 5'-end of a quadruplex telomeric sequence can alter its folding topology. These results suggest the possibility of modulating the folding of the G-quadruplex by linking carbohydrates and have clear implications in molecular recognition and the design of new G-quadruplex ligands.

A logical molecular circuit for programmable and autonomous regulation of protein activity using DNA aptamer-protein interactions

Researchers increasingly envision an important role for artificial biochemical circuits in biological engineering, much like electrical circuits in electrical engineering. Similar to electrical circuits, which control electromechanical devices, biochemical circuits could be utilized as a type of servomechanism to control nanodevices in vitro, monitor chemical reactions in situ, or regulate gene expressions in vivo. (1) As a consequence of their relative robustness and potential applicability for controlling a wide range of in vitro chemistries, synthetic cell-free biochemical circuits promise to be useful in manipulating the functions of biological molecules. Here, we describe the first logical circuit based on DNA-protein interactions with accurate threshold control, enabling autonomous, self-sustained and programmable manipulation of protein activity in vitro. Similar circuits made previously were based primarily on DNA hybridization and strand displacement reactions. This new design uses the diverse nucleic acid interactions with proteins. The circuit can precisely sense the local enzymatic environment, such as the concentration of thrombin, and when it is excessively high, a coagulation inhibitor is automatically released by a concentration-adjusted circuit module. To demonstrate the programmable and autonomous modulation, a molecular circuit with different threshold concentrations of thrombin was tested as a proof of principle. In the future, owing to tunable regulation, design modularity and target specificity, this prototype could lead to the development of novel DNA biochemical circuits to control the delivery of aptamer-based drugs in smart and personalized medicine, providing a more efficient and safer therapeutic strategy.

Polyvalent nucleic acid aptamers and modulation of their activity: a focus on the thrombin binding aptamer

Nucleic acid-based aptamers can be selected from combinatorial libraries of synthetic oligonucleotides to bind, with affinity and specificity similar to antibodies, a wide range of biomedically relevant targets. Compared to protein therapeutics, aptamers exhibit significant advantages in terms of size, non-immunogenicity and wide synthetic accessibility. Various chemical modifications have been introduced in the natural oligonucleotide backbone of aptamers in order to increase their half-life, as well as their pharmacological properties. Very effective alternative approaches, devised in order to improve both the aptamer activity and stability, were based on the design of polyvalent aptamers, able to establish multivalent interactions with the target: thus, multiple copies of an aptamer can be assembled on the same molecular- or nanomaterial-based scaffold. In the present review, the thrombin binding aptamers (TBAs) are analyzed as a model system to study multiple-aptamer constructs aimed at improving their anticoagulation activity in terms of binding to the target and stability to enzymatic degradation. Indeed - even if the large number of chemically modified TBAs investigated in the last 20 years has led to encouraging results - a significant progress has been obtained only recently with bivalent or engineered dendritic TBA aptamers, or assemblies of TBAs on nanoparticles and DNA nanostructures. Furthermore, the modulation of the aptamers activity by means of tailored drug-active reversal agents, especially in the field of anticoagulant aptamers, as well as the reversibility of the TBA activity through the use of antidotes, such as porphyrins, complementary oligonucleotides or of external stimuli, are discussed.

Molecularly imprinted aptamers of gold nanoparticles for the enzymatic inhibition and detection of thrombin

We prepared thrombin-binding aptamer-conjugated gold nanoparticles (TBA-Au NPs) through a molecularly imprinted (MP) approach, which provide highly efficient inhibition activity toward the polymerization of fibrinogen. Au NPs (diameter, 13 nm), 15-mer thrombin-binding aptamer (TBA(15)) with different thymidine linkers, and 29-mer thrombin-binding aptamer (TBA(29)) with different thymidine linkers (Tn) in the presence of thrombin (Thr) as a template were used to prepare MP-Thr-TBA(15)/TBA(29)-Tn-Au NPs. Thrombin molecules were then removed from Au NPs surfaces by treating with 100 mM Tris-NaOH (pH ca. 13.0) to form MP-TBA(15)/TBA(29)-Tn-Au NPs. The length of the thymidine linkers and TBA density on Au NPs surfaces have strong impact on the orientation, flexibility, and stability of MP-TBA(15)/TBA(29)-Tn-Au NPs, leading to their stronger binding strength with thrombin. MP-TBA(15)/TBA(29)-T(15)-Au NPs (ca. 42 TBA(15) and 42 TBA(29) molecules per Au NP; 15-mer thymidine on aptamer terminal) provided the highest binding affinity toward thrombin with a dissociation constant of 5.2 × 10(-11) M. As a result, they had 8 times higher anticoagulant (inhibitory) potency relative to TBA(15)/TBA(29)-T(15)-Au NPs (prepared in the absence of thrombin). We further conducted thrombin clotting time (TCT) measurements in plasma samples and found that MP-TBA(15)/TBA(29)-T(15)-Au NPs had greater anticoagulation activity relative to four commercial drugs (heparin, argatroban, hirudin, and warfarin). In addition, we demonstrated that thrombin induced the formation of aggregates from MP-TBA(15)-T(15)-Au NPs and MP-TBA(29)-T(15)-Au NPs, thereby allowing the colorimetric detection of thrombin at the nanomolar level in serum samples. Our result demonstrates that our simple molecularly imprinted approach can be applied for preparing various functional nanomaterials to control enzyme activity and targeting important proteins.