Periodic Mesoporous Organosilica Derivatives Bearing a High Density of Metal Complexes on Pore Surfaces

Manipulating the Coordination Structure of Molecular Cobalt Sites in Periodic Mesoporous Organosilica for CO2 Photoreduction

Photocatalytic CO2 reduction, including reaction rate, product selectivity, and longevity, is highly sensitive to the coordination structure of the catalytic active sites, and the precise design of the active site remains a challenge in heterogeneous catalysts. Herein, we report on the modulation of the coordination structure of MN x -type active sites (M = Co or Ni; x = 4 or 5) anchored on a periodic mesoporous organosilica (PMO) support to improve photocatalytic CO2 reduction. The PMO was functionalized with pendant 3,6-di(2'-pyridyl)pyridazine (dppz) groups to allow immobilization of molecular Co and Ni complexes with polypyridine ligands. A comparative analysis of CO2 photoreduction in the presence of an organic photosensitizer (4CzIPN, 1,2,3,5-tetrakis(carbazol-9-yl)-4,6-dicyanobenzene) and a conventional [Ru(bpy)3]Cl2 sensitizer revealed strong influence of the coordination environment on the catalytic performance. CoN5-PMO demonstrated a superior CO2 photoreduction activity than the other materials and displayed a cobalt-based turnover number (TONCO) of 92 for CO evolution at ∼75% selectivity after 3 h irradiation in the presence of 4CzIPN. The hybrid CoN5-PMO catalyst exhibited better activity than its homogeneous [CoN5] counterpart, indicating that the heterogenization promotes the formation of isolated active sites with improved longevity and faster catalytic rate.

The design and synthesis of green emissive iridium(III) complexes guided by calculations of the vibrationally-resolved emission spectra

A key challenge in developing emissive materials for organic light-emitting diodes is to optimize their colour saturation, which means targeting narrowband emitters. In this combined theoretical and experimental study, we investigate the use of heavy atoms in the form of trimethylsilyl groups as a tool to reduce the intensity of the vibrations in the 2-phenylpyridinato ligands of emissive iridium(III) complexes that contribute to the vibrationally coupled modes that broaden the emission profile. An underutilised computational technique, Frank-Condon vibrationally coupled electronic spectral modelling, was used to identify the key vibrational modes that contribute to the broadening of the emission spectra in known benchmark green-emitting iridium(III) complexes. Based on these results, a family of eight new green-emitting iridium complexes containing trimethylsilyl groups substituted at different positions of the cyclometalating ligands has been prepared to explore the impact that these substituents have on reducing the intensity of the vibrations and the resulting reduction in the contribution of vibrationally coupled emission modes to the shape of the emission spectra. We have demonstrated that locating a trimethylsilyl group at the N4 or N5 position of the 2-phenylpyridine ligand damps the vibrational modes of the iridium complex and provides a modest narrowing of the emission spectrum of 8-9 nm (or 350 cm^-1). The strong correlation between experimental and calculated emission spectra highlights the utility of this computational method to understand how the vibrational modes contribute to the profile of the emission spectra in phosphorescent iridium(III) emitters.

Solar driven CO2 reduction with a molecularly engineered periodic mesoporous organosilica containing cobalt phthalocyanine

A molecular cobalt phthalocyanine (CoPc) catalyst has been integrated in an ethylene-bridged periodic mesoporous organosilica (PMO) to fabricate a hybrid material, CoPc-PMO, that catalyses CO₂ reduction to CO in a photocatalytic system using [Ru(bpy)₃]²⁺ (bpy = 2,2'-bipyridine) as a photosensitizer and 1,3-dimethyl-2-phenyl-2,3-dihydro-1H-benzo[d]imidazole (BIH) as an electron donor. CoPc-PMO displays a Co-based turnover number (TON_CO) of >6000 for CO evolution with >70% CO-selectivity after 4 h irradiation with UV-filtered simulated solar light, and a quantum yield of 1.95% at 467 nm towards CO. This system demonstrates a benchmark TON_CO for immobilised CoPc-based catalysts towards visible light-driven CO₂ reduction.

Improved Photocatalytic H2 Evolution by Cobaloxime-Tethered Imidazole-Functionalized Periodic Mesoporous Organosilica

Molecular cobaloxime-based heterogeneous systems have attracted great interest during the last decades in light-driven hydrogen production. Here, we present a novel cobaloxime-tethered periodic mesoporous organosilica (PMO) hybrid (Im-EtPMO-Co) prepared through the immobilization of a molecular cobaloxime complex on the imidazole groups present in ethylene-bridged PMO. The successful assembly of a molecular cobaloxime catalyst via cobalt-imidazole axial ligation has been evidenced by several techniques, such as 13C NMR, Raman spectroscopy, ICP-MS, and XPS. The catalytic performance of Im-EtPMO-Co catalyst was essayed on the hydrogen evolution reaction (HER) under visible light in presence of a photosensitizer (Eosin Y) and an electron donor (TEOA). It showed an excellent hydrogen production of 95 mmol hydrogen at 2.5 h, which corresponded to a TON of 138. These results reflect an improved photocatalytic activity with respect to its homogenous counterpart [Co(dmgH)2(Im)Cl] as well as a previous cobaloxime-PMO system with pyridine axial ligation to the cobaloxime complex.

Molecular recognition of catechol on crystal-like surface of periodic mesoporous organosilica containing pyridinylethynylpyridine

A new periodic mesoporous organosilica (PMO) containing pyridinylethynylpyridine (PEPy) was successfully synthesized under basic conditions in the presence of a cationic surfactant. The PEPy-PMO had a unique mesoporous structure with...

Recent advanced development of metal-loaded mesoporous organosilicas as catalytic nanoreactors

Ordered periodic mesoporous organosilicas have been widely applied in adsorption/separation/sensor technologies and the fields of biomedicine/biotechnology as well as catalysis. Crucially, surface modification with functional groups and metal complexes or nanoparticle loading has ensured high efficacy and efficiency. This review will highlight the current state of design and catalytic application of transition metal-loaded mesoporous organosilica nanoreactors. It will outline prominent synthesis approaches for the grafting of metal complexes, metal salt adsorption and in situ preparation of metal nanoparticles, and summarize the catalytic performance of the resulting mesoporous organosilica hybrid materials. Finally, the potential prospects and challenges of metal-loaded mesoporous organosilica nanoreactors are addressed.

Theoretical analysis of means of preventing Si–C bond cleavage during polycondensation of organosilanes to organosilicas

Practical strategies for suppressing Si–C cleavage during the polycondensation of organosilanes were presented based on ab initio quantum chemical calculations of model compounds.

Light-Emitting Lanthanide Periodic Mesoporous Organosilica (PMO) Hybrid Materials

Periodic mesoporous organosilicas (PMOs) have a well ordered mesoporous structure, a high thermal and mechanical stability and a uniform distribution of organic functionalities in the pore walls. The organic groups allow PMOs to be modified and functionalized by using a wide range of organic reactions. Since their first report in 1999, PMOs have found a vast range of applications, such as for catalysis, adsorbents, low-k films, biomedical supports and also for optical applications. Optical applications are very interesting as PMOs offer the possibility of designing advanced luminescent hybrid materials comprising of organic components, yet with much higher stability and very good processability. Despite their promising possibilities, the optical properties of pristine PMOs and PMOs grafted with d-metal or f-metal ions and complexes have been explored less frequently. In this review, we aimed to overview the exciting light emitting properties of various reported lanthanide PMO hybrid materials and interest the reader in this promising application for lanthanide PMO materials.

Recent Advances in Facile Liquid Phase Epoxidation of Light Olefins over Heterogeneous Molybdenum Catalysts

Molybdenum complexes are versatile and efficient for liquid phase olefin epoxidation reactions. Rational design of catalysts is critical to achieve high atom efficiency during epoxidation processes. Although liquid phase epoxidation has been a popular topic for decades, three key issues, (a) rational control of morphology of molybdenum nanoparticles, (b) manipulating metal-support interaction and (c) altering electronic configuration at molybdenum center remains unsolved in this area. Therefore, in this paper, we have critically revised recent research progress on heterogeneous molybdenum catalysts for facile liquid phase olefin epoxidation in terms of catalyst synthesis, surface characterization, catalytic performance and structure-function relationship. Furthermore, plausible reaction mechanisms will be systematically discussed with the aim to provide insights into fundamental understanding on novel epoxidation chemistry.

Effects of pore surfaces on the electronic states of metal complexes formed on bipyridine periodic mesoporous organosilica

A combined experimental–theoretical study clarifies correlations between the pore-surface structures and the electronic properties of metal complexes on BPy-PMO.

Synthesis and Optical Applications of Periodic Mesoporous Organosilicas

Periodic mesoporous organosilicas (PMOs), synthesized via surfactant-directed self-assembly of a polysilylated organic precursor (R[Si(OR')₃]_n; n≥2, R: organic group), are promising candidates such as catalysts and adsorbents, and for use in optical and electrical devices, owing to their high surface area, well-defined nanoporous structure, and highly functional organosilica framework. Their framework functionality can be widely tuned by selecting appropriate organic groups and controlling their arrangement. This chapter describes the synthesis and structure of PMOs with simple organic groups such as ethane and benzene, and the unique properties and optical applications of functional PMOs. Special light-harvesting properties and their exploitation in photocatalysis, highly emissive PMOs and their application to color-tunable transparent films, hole-transporting PMOs and their use in organic solar cells, and PMOs containing chelating ligands and their use as solid supports for heterogeneous metal complex catalysis are described.

Metal-Organic-Framework-Derived Co3 S4 Hollow Nanoboxes for the Selective Reduction of Nitroarenes

MOF-derived Co₃ S₄ /CN hollow nanoboxes (CN=nitrogen-doped carbon) was used to catalyze the chemoselective reduction of nitroarenes to anilines under mild reaction conditions with H₂ as the reducing agent. The catalyst provides high conversion efficiencies and selectivities for a variety of nitroarene substrates that contain electron-donating or electron-withdrawing substituents under mild reaction conditions (in methanol at 60 °C). Further, the nanobox inhibits both dehalogenation and vinyl hydrogenation reactions, which are common limitations of state-of-the-art Pd-based catalysts. Because the reactions result in pure aniline products, the need for separation by column chromatography is eliminated. The resulting anilines are easily separated from the methanolic reaction solution in just three simple steps (centrifugation, decantation, and drying). If employed in industrial processes, catalysts of this kind would significantly reduce the amount of waste organic solvent generated and thus satisfy the need for sustainable chemical processes.

Distribution Control-Oriented Intercalation of a Cationic Metal Complex into Layered Silicates Modified with Organosulfonic-Acid Moieties

A layered sodium silicate, octosilicate (Na₂Si₈O₁₇· nH₂O), was modified with an organosulfonic-acid moiety (sulfonated propyl (SPr) group, sulfonated phenethyl (SPhE) group, or sulfonated p-trifluoromethylphenyl (STFPh) group) for use as a host material to accommodate a cationic guest, tris(2,2'-bipyridine)ruthenium(II) cation ([Ru(bpy)₃]²⁺). The organosulfonic-acid moiety was bound to the silicate layer via a reaction of an alkylammonium-exchanged octosilicate with a silane coupling agent, and subsequent treatment (oxidation or sulfonation) of the bound organosilyl groups; the surface densities of the organosulfonic-acid moiety were varied by controlling the added amount of silane coupling agents. Adsorption of [Ru(bpy)₃]²⁺ onto surface-modified octosilicates was conducted to find that some surface-modified octosilicates successfully adsorbed [Ru(bpy)₃]²⁺ in the interlayer space (intercalation), while other surface-modified octosiliates did not. In addition, the UV-vis absorption and the luminescence indicate that intercalated [Ru(bpy)₃]²⁺ diffused in the interlayer and that the distribution of the time-averaged location varied depending on the kind and amount of the organosulfonic-acid moieties. Thus, the kind and surface density of the organosulfonic-acid moiety, which correlates to the interactions between the group and the guest species, the volume of free nanospace for adsorption and motion of guests, and the swelling properties, are the key factors not only for the intercalation ability but also for the dynamics of the guest in the interlayer space.

Fabrication of ultrasmall WS2 quantum dots-coated periodic mesoporous organosilica nanoparticles for intracellular drug delivery and synergistic chemo-photothermal therapy

Introduction

The consolidation of different therapies into a single nanoplatform has shown great promise for synergistic tumor treatment. In this study, a multifunctional platform by WS₂ quantum dots (WQDs)-coated doxorubicin (DOX)-loaded periodic mesoporous organosilicas (PMOs-DOX@WQDs) nanoparticles were fabricated for the first time, and which exhibits good potential for synergistic chemo-photothermal therapy.

Materials and methods

The structure, light-mediated drug release behavior, photothermal effect, and synergistic therapeutic efficiency of PMOs-DOX@WQDs to HCT-116 colon cancer cells were investigated. The thioether-bridged PMOs exhibit a high DOX loading capacity of 66.7 μg mg⁻¹. The gating of the PMOs not only improve the drug loading capacity but also introduce the dual-stimuli-responsive performance. Furthermore, the as-synthesized PMOs-DOX@WQDs nanoparticles can efficiently generate heat to the hyperthermia temperature with near infrared laser irradiation.

Results

It was confirmed that PMOs-DOX@WQDs exhibit remarkable photothermal effect and light-triggered faster release of DOX. More importantly, it was reasonable to attribute the efficient anti-tumor efficiency of PMOs-DOX@WQDs.

Conclusion

The in vitro experimental results confirm that the fabricated nanocarrier exhibits a significant synergistic effect, resulting in a higher efficacy to kill cancer cells. Therefore, the WQD-coated PMOs present promising applications in cancer therapy.

Microscopic chiral pockets in a tris(chelated) iridium(iii) complex as sites for dynamic enantioselective quenching

A microscopic pocket surrounded by bulky ligands in Ir(iii) acted as a site discriminating the chirality of an approaching molecule.

Propylsulfonic acid-anchored isocyanurate-based periodic mesoporous organosilica (PMO-ICS-Pr-SO3H): A new and highly efficient recoverable nanoporous catalyst for the one-pot synthesis of bis(indolyl)methane derivatives

A new propylsulfonic acid-anchored isocyanurate bridging periodic mesoporous organosilica (PMO-ICS-Pr-SO₃H) was prepared and shown to be a highly efficient recyclable nanoporous catalyst for the one-pot synthesis of bis(indolyl)methane derivatives in good to excellent yields from indole and different aldehydes in EtOH under mild reaction conditions in short reaction times. Moreover, the nanoporous catalyst was recovered and reused at least four times without significant decrease in its catalytic activity. The PMO-ICS-Pr-SO₃H catalyst was characterizred by Fourier transform infrared (FTIR) spectroscopy, thermogravimetry analysis (TGA) and N₂ adsorption-desorption isotherms techniques as well as field emission scanning electron microscopy (FESEM) and energy-dispersive X-ray (EDX) spectroscopy. Compared to the classical methodologies, this method illustrated significant advantages including low loading of the catalyst, high to excellent yields, short reaction times, avoiding the use of toxic transition metals or reactive reagents for modification of the catalytic activity, easy separation and purification of the products, and reusability of the catalyst.

Chiral phosphorescent probes for amino acids: hybrids of iridium(iii) complexes with synthetic saponite

The effects of amino acids on the emission of iridium(iii) complexes adsorbed by colloidal particles of synthetic saponite lead to the conclusion that the interplay between two intramolecular chiral centers achieved enantioselectivity.

Asymmetric transfer hydrogenation–Sonogashira coupling one-pot enantioselective tandem reaction catalysed by Pd(0)–Ru(iii)/diamine-bifunctionalized periodic mesoporous organosilica

Pd(0)–Ru(iii)/diamine-functionalized periodic mesoporous organosilica for asymmetric transfer hydrogenation–Sonogashira coupling of iodoacetophenone and arynes is investigated.

Pd/APTPOSS@KCC-1 as a new and efficient support catalyst for C–H activation

In this study, KCC-1 was functionalized with APTPOSS groups acting as the strong performers so that the Pd NPs were well-dispersed on the fibers of the KCC-1 microspheres.

Nickel containing ionic liquid based ordered nanoporous organosilica: a powerful and recoverable catalyst for synthesis of polyhydroquinolines

The synthesis, characterization and catalytic application of a novel nickel containing ionic liquid based ordered mesoporous organosilica are demonstrated.

Site-selective Suzuki-Miyaura coupling of heteroaryl halides - understanding the trends for pharmaceutically important classes

Suzuki-Miyaura cross-coupling reactions of heteroaryl polyhalides with aryl boronates are surveyed. Drawing on data from literature sources as well as bespoke searches of Pfizer's global chemistry RKB and CAS Scifinder® databases, the factors that determine the site-selectivity of these reactions are discussed with a view to rationalising the trends found.

Probing the molecular character of periodic mesoporous organosilicates via photoluminescence of Lewis acid-base adducts

Photoluminescence decay was used as a structure-sensitive method to compare the distribution of emitting sites in periodic mesoporous organosilicates (PMOs) to their respective molecular analogs. The observed close similarity of PL decays confirms the molecular nature of PMOs and high homogeneity of emitting sites.

Syntheses and applications of periodic mesoporous organosilica nanoparticles

Periodic Mesoporous Organosilica (PMO) nanomaterials are envisioned to be one of the most prolific subjects of research in the next decade. Similar to mesoporous silica nanoparticles (MSN), PMO nanoparticles (NPs) prepared from organo-bridged alkoxysilanes have tunable mesopores that could be utilized for many applications such as gas and molecule adsorption, catalysis, drug and gene delivery, electronics, and sensing; but unlike MSN, the diversity in chemical nature of the pore walls of such nanomaterials is theoretically unlimited. Thus, we expect that PMO NPs will attract considerable interest over the next decade. In this review, we will present a comprehensive overview of the synthetic strategies for the preparation of nanoscaled PMO materials, and then describe their applications in catalysis and nanomedicine. The remarkable assets of the PMO structure are also detailed, and insights are provided for the preparation of more complex PMO nanoplatforms.

Confined Polymerization in Highly Ordered Mesoporous Organosilicas

Hybrid mesoporous organosilica exhibiting crystal-like order in the walls provided an ideal channel reaction vessel for the confined polymerization of acrylonitrile (PAN). The resulting high-molecular-mass PAN fills the channels at high yield and forms an ordered nanostructure of polymer nanobundles enclosed into the hybrid matrix. The in situ thermal transformation of PAN into rigid polyconjugated and, eventually, into condensed polyaromatic carbon nanofibers, retains the periodic architecture. Simultaneously, the matrix evolves showing the fusion of the p-phenylene rings and the cleavage of carbonsilicon bonds: this gives rise to graphitic-carbon/silica nanocomposites containing hyper-oxydrylated silica nanophases. Interestingly, the 3D hexagonal mesostructure survives in the carbonaceous material. The exploitation of porous materials of high capacity and a hybrid nature, for polymerization in the confined state, followed by high temperature treatments, allowed us to achieve unique and precisely fabricated nanostructures, thus paving the way for the construction of fine-tuned electronic and light-harvesting materials.

Design and fabrication of mesoporous heterogeneous basic catalysts

Recent advances in mesoporous solid bases were reviewed, and fundamental principles of how to fabricate efficient basic catalysts were highlighted.

Harvesting light energy by iridium(iii) complexes on a clay surface

The photon energy adsorbed by a donor molecule migrates among other donor molecules until it is captured by an acceptor.