Catalytic Transfer Hydrogenation by a Trivalent Phosphorus Compound: Phosphorus-Ligand Cooperation Pathway or PIII/PVRedox Pathway?

P(V)-bis(amidophenolate) ligand cooperation: stoichiometric CO-bond cleavage in aldehydes and ketones

The cooperation between a geometrically constrained, highly electrophilic phosphorus(V) center, and an electronically rich tetradentate bis(amidophenolate) ligand enables the cleavage of the CO bond from typical aldehydes and ketones delivering iminio phosphoramidate species. The amphiphilic nature of these products, which is demonstrated through their reaction with typical Lewis acids and bases, enables their use as a mild source of silylium cations from silanes, allowing the selective reductive coupling of aldehydes to ethers under catalytic conditions.

Phosphorus-Ligand Redox Cooperative Catalysis: Unraveling Four-Electron Dioxygen Reduction Pathways and Reactive Intermediates

The reduction of dioxygen to water is crucial in biology and energy technologies, but it is challenging due to the inertness of triplet oxygen and complex mechanisms. Nature leverages high-spin transition metal complexes for this, whereas main-group compounds with their singlet state and limited redox capabilities exhibit subdued reactivity. We present a novel phosphorus complex capable of four-electron dioxygen reduction, facilitated by unique phosphorus-ligand redox cooperativity. Spectroscopic and computational investigations attribute this cooperative reactivity to the unique electronic structure arising from the geometry of the phosphorus complex bestowed by the ligand. Mechanistic study via spectroscopic and kinetic experiments revealed the involvement of elusive phosphorus intermediates resembling those in metalloenzymes. Our result highlights the multielectron reactivity of phosphorus compound emerging from a carefully designed ligand platform with redox cooperativity. We anticipate that the work described expands the strategies in developing main-group catalytic reactions, especially in small molecule fixations demanding multielectron redox processes.

Metallomimetic C-F Activation Catalysis by Simple Phosphines

Delivering metallomimetic reactivity from simple p-block compounds is highly desirable in the search to replace expensive, scarce precious metals by cheap and abundant elements in catalysis. This contribution demonstrates that metallomimetic catalysis, involving facile redox cycling between the P(III) and P(V) oxidation states, is possible using only simple, cheap, and readily available trialkylphosphines without the need to enforce unusual geometries at phosphorus or use external oxidizing/reducing agents. Hydrodefluorination and aminodefluorination of a range of fluoroarenes was realized with good to very good yields under mild conditions. Experimental and computational mechanistic studies show that the phosphines undergo oxidative addition of the fluoroaromatic substrate via a Meisenheimer-like transition state to form a fluorophosphorane. This undergoes a pseudotransmetalation step with a silane, via initial fluoride transfer from P to Si, to give experimentally observed phosphonium ions. Hydride transfer from a hydridosilicate counterion then leads to a hydridophosphorane, which undergoes reductive elimination of the product to reform the phosphine catalyst. This behavior is analogous to many classical transition-metal-catalyzed reactions and so is a rare example of both functional and mechanistically metallomimetic behavior in catalysis by a main-group element system. Crucially, the reagents used are cheap, readily available commercially, and easy to handle, making these reactions a realistic prospect in a wide range of academic and industrial settings.

Ligand-enforced geometric constraints and associated reactivity in p-block compounds

The geometry at an element centre can generally be predicted based on the number of electron pairs around it using valence shell electron pair repulsion (VSEPR) theory. Strategies to distort p-block compounds away from these predicted geometries have gained considerable interest due to the unique structural outcomes, spectroscopic properties or reactivity patterns engendered by such distortion. This review presents an up-to-date group-wise summary of this exciting and rapidly growing field with a focus on understanding how the ligand employed unlocks structural features, which in turn influences the associated reactivity. Relevant geometrically constrained compounds from groups 13-16 are discussed, along with selected stoichiometric and catalytic reactions. Several areas for advancement in this field are also discussed. Collectively, this review advances the notion of geometric tuning as an important lever, alongside electronic and steric tuning, in controlling bonding and reactivity at p-block centres.

Geometrically Deformed and Conformationally Rigid Phosphorus Trisamides Featuring an Unsymmetrical Backbone

Nonclassical P(III) centers have attracted much attention in recent years. Incorporating a P(III) center in a rigid bicyclic platform offers a particularly attractive way to invoke significant geometric distortion of the phosphorus atom that may in turn induce unusual reactivity. Although still relatively scarcely explored, phosphorus centers enforced in a non-C3 symmetry have gained significant traction lately. However, the current scaffolds are based on a relatively limited set of design principles and ligand platforms associated therewith. This work is focussed on the synthesis as well as versatile oxidation, addition and coordination chemistry of a geometrically distorted P(III) species featuring a synthetically modular, nonsymmetric trisamine platform derived from 2-(methylamino)-N-(2-(methylamino)phenyl)benzenesulfonamide.

Reactivity of a Strictly T-Shaped Phosphine Ligated by an Acridane Derived NNN Pincer Ligand

The steric tuning of a tridentate acridane-derived NNN pincer ligand allows for the isolation of a strictly T-shaped phosphine that exhibits ambiphilic reactivity. Well-defined phosphorus-centered reactivity towards nucleophiles and electrophiles is reported, contrasting with prior reports on this class of compounds. Reactions towards oxidants are also described. The latter result in the two-electron oxidation of the phosphorus atom from +III to +V and are accompanied by a strong geometric distortion of the NNN pincer ligand. By contrast, cooperative activation of E-H (HCl, HBcat, HOMe) bonds proceeds with retention of the phosphorus redox state. When using H2 O as a substrate, the reaction results in the full disassembly of H2 O to its constituent atoms, highlighting the potential of this platform for small molecule activation reactions.

Metal-free catalytic hydroboration of imine with pinacolborane using a pincer-type phosphorus compound: mechanistic insight and improvement of the reaction

A mechanistic study of the catalytic hydroboration of imine using a pincer-type phosphorus compound 1NP was performed through the combination of DFT and DLPNO-CCSD(T) calculations. The reaction proceeds through a phosphorus-ligand cooperative catalytic cycle, where the phosphorus center and triamide ligand work in a synergistic manner. First, the pinB-H bond activation by 1NP occurs through the cooperative functions of the phosphorus center and the triamide ligand, leading to a phosphorus-hydride intermediate 2NP. This is the rate-determining step, with the Gibbs energy barrier and Gibbs reaction energy of 25.3 and -17.0 kcal mol^-1, respectively. Subsequently, the hydroboration of phenylmethanimine takes place through a concerted transition state through the cooperative function of the phosphorus center and the triamide ligand. It leads to the final hydroborated product 4 with the regeneration of 1NP. Our computational results reveal that the experimentally isolated intermediate 3NP is a resting state of the reaction. It is formed through the B-N bond activation of 4 by 1NP, rather than via the insertion of the CN double bond of phenylmethanimine into the P-H bond of 2NP. However, this side reaction can be suppressed by utilizing a planar phosphorus compound AcrDipp-1NP as the catalyst, which features steric-demanding substituents on the chelated N atom of the ligand.

A crystalline T-shaped planar group 14 anion

Isolable T-shaped planar pnictogen compounds R₃Pn were reported more than three decades ago and have been attracting burgeoning interest in recent years; T-shaped planar group 14 anions, isoelectronic to R₃Pn, however, are still unknown. Herein, we report the synthesis, full characterization, and reactivity of the first crystalline T-shaped planar group 14 anion 4 bearing a trinitrogen pincer ligand. DFT calculations indicate that the tricoordinate germanium center features both an unoccupied 4p orbital and two lone pairs of electrons. Its electron-rich nature allows for the nucleophilic attack on the methyl iodine giving methyl-substituted complex 5 and facile oxidation of the germanium center by elemental sulfur and selenium to furnish unpresented organic anions bearing terminal Ge[double bond, length as m-dash]Ch (Ch = S or Se) double bonds.

Visible-Light-Promoted Hydrogenation of Azobenzenes to Hydrazobenzenes with Thioacetic Acid as the Reductant

A catalyst- and metal-free hydrogenation of azobenzenes to hydrazobenzenes in the presence of thioacetic acid was achieved under visible light irradiation. The transformation was carried out under mild conditions in an air atmosphere at ambient temperature, generating a variety of hydrazobenzenes with yields up to 99%. The current process is compatible with a variety of substituents and is highly chemoselective for azo reduction when other unsaturated functionalities (carbonyl, alkenyl, alkynyl, etc.) are contained. Preliminary mechanistic study indicated that the transformation could be a radical process.

Cofactor-Free Dioxygenases-Catalyzed Reaction Pathway via Proton-Coupled Electron Transfer

Understanding the general mechanism of the metal-free and cofactor-free oxidases and oxygenases catalyzed activation of triplet O₂ is one of the most challenging questions in the field of enzymatic catalysis. Herein, we have performed Quantum Mechanics/Molecular Mechanics (QM/MM) multiscale simulations to reveal the detailed mechanism of the HOD catalyzed (i.e., 1-H-3-hydroxy-4-oxoquinaldine 2,4-dioxygenase from Arthrobacter nitroguajacolicus Rü61a) decomposition of N-heteroaromatic compounds. The complete catalytic mechanism includes four steps: (1) proton transfer from 1-H-3-hydroxy-4-oxoquinaldine (QND) substrate to His251 residue coupled with an electron transfer from QND to triplet O₂ (i.e., PCET), (2) formation of C-O bond via an open-shell singlet diradical recombination pathway, (3) ring-closure to form a bicyclic ring, and (4) dissociation of CO. The dissociation of CO is determined as the rate-limiting step, and its calculated energy barrier of 14.9 kcal/mol is consistent with the 15.5 kcal/mol barrier derived from experimental kinetic data. The mechanistic profile is not only valuable for understanding the fundamental pathway of cofactor-free oxidases and oxygenases-catalyzed reactions involving the triplet O₂ activation but also discloses a new pathway that undergoes the processes of PCET and open-shell singlet transition state.

Catalytic Mechanisms of Transfer Hydrogenation of Azobenzene with Ammonia Borane by Pincer Bismuth Complex: Crucial Role of C=N Functional Group on the Pincer Ligand

Transfer hydrogenation of azobenzene with ammonia borane mediated by pincer bismuth complex 1 was systematically investigated through density functional theory calculations. An unusual metal-ligand cooperation mechanism was disclosed, in which the saturation/regeneration of the C=N functional group on the pincer ligand plays an essential role. The reaction is initiated by the hydrogenation of the C=N bond (saturation) with ammonia borane to afford 3^CN , which is the rate-determining step with Gibbs energy barrier (ΔG^≠ ) and Gibbs reaction energy (ΔG) of 25.6 and -7.3 kcal/mol, respectively. 3^CN is then converted to a Bi-H intermediate through a water-bridged pathway, which is followed up with the transfer hydrogenation of azobenzene to produce the final product N,N'-diphenylhydrazine and regenerate the catalyst. Finally, the catalyst could be improved by substituting the phenyl group for the tert-butyl group on the pincer ligand, where the ΔG^≠ value (rate-determining step) decreases to 24.0 kcal/mol.

Ligand‐Enabled Disproportionation of 1,2‐Diphenylhydrazine at a P V ‐Center**

We present herein the synthesis of a nearly square‐pyramidal chlorophosphorane supported by the tetradentate bis(amidophenolate) ligand, N,N′‐bis(3,5‐di‐tert‐butyl‐2‐phenoxy)‐1,2‐phenylenediamide. After chloride abstraction the resulting phosphonium cation efficiently promotes the disproportionation of 1,2‐diphenylhydrazine to aniline and azobenzene. Mechanistic studies, spectroscopic analyses and theoretical calculations suggest that this unprecedented reactivity mode for P^V‐centres is induced by the high electrophilicity at the cationic P^V‐center, which originates from the geometry constraints imposed by the rigid pincer ligand, combined with the ability of the o‐amidophenolate moieties to act as electron reservoir. This study illustrates the promising role of cooperativity between redox‐active ligands and phosphorus for the design of organocatalysts able to promote redox processes.

The curious saga of dehydrogenation/hydrogenation for chemical hydrogen storage: a mechanistic perspective

Hydrogen storage is an indispensable component of hydrogen-based fuel economy. Chemical hydrogen storage relies on the development of lightweight compounds which can deliver high weight percentage of H₂ at moderate temperatures through dehydrogenation and can be recovered from the dehydrogenated mass by hydrogenation for reuse. In this feature article we primarily discuss the mechanistic underpinnings of the catalytic dehydrogenation of ammonia-borane, a potential candidate for hydrogen storage and the challenges associated with its regeneration from the dehydrogenated mass. Moreover, we highlight the mechanistic intricacies, viability, sustainability and unresolved issues of allied chemical hydrogen storage avenues such as the CH₃OH-CO₂ cycle.

Cofactor-free ActVA-Orf6 monooxygenase catalysis via proton-coupled electron transfer: A QM/MM study

Uncovering the comprehensive catalytic mechanism for the activation of triplet O2 through metal-free and cofactor-free oxidases and oxygenases remains one of the most challenging questions in the area of enzymatic...

Amine-Boranes as Transfer Hydrogenation and Hydrogenation Reagents: A Mechanistic Perspective

Transfer hydrogenation (TH) has historically been dominated by Meerwein-Ponndorf-Verley (MPV) reactions. However, with growing interest in amine-boranes, not least ammonia-borane (H3 N⋅BH3 ), as potential hydrogen storage materials, these compounds have also started to emerge as an alternative reagent in TH reactions. In this Review we discuss TH chemistry using H3 N⋅BH3 and their analogues (amine-boranes and metal amidoboranes) as sacrificial hydrogen donors. Three distinct pathways were considered: 1) classical TH, 2) nonclassical TH, and 3) hydrogenation. Simple experimental mechanistic probes can be employed to distinguish which pathway is operating and computational analysis can corroborate or discount mechanisms. We find that the pathway in operation can be perturbed by changing the temperature, solvent, amine-borane, or even the substrate used in the system, and subsequently assignment of the mechanism can become nontrivial.

Fe(II) Redox Chemistry in the Environment

Iron (Fe) is the fourth most abundant element in the earth's crust and plays important roles in both biological and chemical processes. The redox reactivity of various Fe(II) forms has gained increasing attention over recent decades in the areas of (bio) geochemistry, environmental chemistry and engineering, and material sciences. The goal of this paper is to review these recent advances and the current state of knowledge of Fe(II) redox chemistry in the environment. Specifically, this comprehensive review focuses on the redox reactivity of four types of Fe(II) species including aqueous Fe(II), Fe(II) complexed with ligands, minerals bearing structural Fe(II), and sorbed Fe(II) on mineral oxide surfaces. The formation pathways, factors governing the reactivity, insights into potential mechanisms, reactivity comparison, and characterization techniques are discussed with reference to the most recent breakthroughs in this field where possible. We also cover the roles of these Fe(II) species in environmental applications of zerovalent iron, microbial processes, biogeochemical cycling of carbon and nutrients, and their abiotic oxidation related processes in natural and engineered systems.

Visible-Light-Promoted Diboron-Mediated Transfer Hydrogenation of Azobenzenes to Hydrazobenzenes

A visible-light-promoted transfer hydrogenation of azobenzenes has been developed. In the presence of B₂pin₂ and upon visible-light irradiation, the reactions proceeded smoothly in methanol at ambient temperature. The azobenzenes with diverse functional groups have been reduced to the corresponding hydrazobenzenes with a yield of up to 96%. Preliminary mechanistic studies indicated that the hydrogen atom comes from the solvent and the transformation is achieved through a radical pathway.

Main Group Redox Catalysis of Organopnictogens: Vertical Periodic Trends and Emerging Opportunities in Group 15

A growing number of organopnictogen redox catalytic methods have emerged-especially within the past 10 years-that leverage the plentiful reversible two-electron redox chemistry within Group 15. The goal of this Perspective is to provide readers the context to understand the dramatic developments in organopnictogen catalysis over the past decade with an eye toward future development. An exposition of the fundamental differences in the atomic structure and bonding of the pnictogens, and thus the molecular electronic structure of organopnictogen compounds, is presented to establish the backdrop against which organopnictogen redox reactivity-and ultimately catalysis-is framed. A deep appreciation of these underlying periodic principles informs an understanding of the differing modes of organopnictogen redox catalysis and evokes the key challenges to the field moving forward. We close by addressing forward-looking directions likely to animate this area in the years to come. What new catalytic manifolds can be developed through creative catalyst and reaction design that take advantage of the intrinsic redox reactivity of the pnictogens to drive new discoveries in catalysis?

Pincer-Type Ligand-Assisted Catalysis and Small-Molecule Activation by non-VSEPR Main-Group Compounds

In 2005, a facile dihydrogen activation was reported by the Power group using an alkyne analog of germanium [ArGe≡GeAr; Ar=2,6-Trip₂ -C₆ H₃ (Trip=2,4,6-ⁱ Pr₃ -C₆ H₂ )]. After that, a significant progress has been made in the activation of various small molecules by main-group compounds, and a variety of stoichiometric and catalytic processes have been formulated using the p-block elements. In this regard, compounds containing low-valent main-group elements with a frontier orbitals of relatively small energy gaps or compounds forming frustrated Lewis pair (FLP) became quite successful. In spite of these promising stoichiometric and catalytic transformations, redox-cycling catalysts based on main-group elements remain extremely rare. Recently, it has been observed that pincer type ligands supported geometry constrained main-group compounds are capable of acting as redox catalysts similar to those of the transition metals. In this review, we focus on the synthesis and the structural aspects of the geometry constrained main-group compounds using pincer ligands. Emphasis has been placed on their applications on catalytic activity and small molecules activation.

Transition-Metal-Like Catalysis with a Main-Group Element: Bismuth-Catalyzed C-F Coupling of Aryl Boronic Esters

The main-group age: The past decade has revealed main-group-element compounds that display transition-metal-like reactivity in stoichiometric and even catalytic transformations. Cornella and co-workers have now reported a bismuth complex that catalyzes fluoroarene formation from aryl boronate esters, a reaction that is almost unprecedented in transition-metal catalysis.

Ammonia borane as a reducing agent in organic synthesis

Ammonia borane is gaining increasing attention as a sustainable and atom-economical winning reagent for the reduction of several substrates.

Dehydrogenation of Amine-Boranes Using p-Block Compounds

Amine-boranes have gained a lot of attention due to their potential as hydrogen storage materials and their capacity to act as precursors for transfer hydrogenation. Therefore, a lot of effort has gone into the development of suitable transition- and main-group metal catalysts for the dehydrogenation of amine-boranes. During the past decade, new systems started to emerge solely based on p-block elements that promote the dehydrogenation of amine-boranes through hydrogen-transfer reactions, polymerization initiation, and main-group catalysis. In this review, we highlight the development of these p-block based systems for stoichiometric and catalytic amine-borane dehydrogenation and discuss the underlying mechanisms.

Reversible alkene binding and allylic C-H activation with an aluminium(i) complex

The monomeric molecular aluminium(i) complex 1 [{(ArNCMe)₂CH}Al] (Ar = 2,6-di-iso-propylphenyl) reacts with a series of terminal and strained alkenes including ethylene, propylene, allylbenzene and norbornene to form alkene bound products.

The monomeric molecular aluminium(i) complex 1 [{(ArNCMe)₂CH}Al] (Ar = 2,6-di-iso-propylphenyl) reacts with a series of terminal and strained alkenes including ethylene, propylene, allylbenzene and norbornene to form alkene bound products. Remarkably all these reactions are reversible under mild conditions (298–353 K) with alkene binding being disfavoured at higher temperatures due to the positive reaction entropy. Van't Hoff analyses have allowed quantification of the binding events with . Calculations and single crystal X-ray diffraction studies are consistent with the alkene bound species being metallocyclopropane complexes. Alkene binding involves a reversible redox process with changes from the +1 to +3 aluminium oxidation state. Under more forcing conditions the metallocyclopropane complexes undergo non-reversible allylic C–H bond activation to generate aluminium(iii) allyl hydride complexes. This represents a rare example of redox-based main group reactivity in which reversible substrate binding is followed by a further productive bond breaking event. Analysis of the mechanism reveals a reaction network in which alkene dissociation and reformation of 1 is required for allylic C–H activation, a realisation that has important implications for the long-term goal of developing redox-based catalytic cycles with main group compounds.

On the Redox Reactivity of a Geometrically Constrained Phosphorus(III) Compound

The reactivity of a geometrically constrained phosphorus(III) complex bearing the N,N-bis(3,5-di-tert-butyl-2-phenolate)amide pincer ligand (P(ONO); 1) towards oxidants and reductants is explored. This compound can be readily oxidized to the phosphorus(V) dihalo-derivatives P(ONO)X₂ where X=Cl (2), Br (3) and I (4). Attempts at isolating the analogous difluoride through oxidation of 1 were unsuccessful yielding only the hydrofluoride P(ONO)(H)F (5), however P(ONO)F₂ (6) can be accessed via a halide exchange reaction of 2 with KF. Compound 2 can be employed as a precursor to novel cationic species through chloride ion displacement using strong Lewis bases. Thus, reaction of 2 with two or three molar equivalents of dimethylaminopyridine (DMAP) affords [P(ONO)(Cl)(DMAP)₂ ]⁺ (7) and [P(ONO)(DMAP)₃ ]²⁺ (8). Reaction of 2 with the weaker bidentate base 2,2'-bipyridine (bipy) affords [P(ONO)(Cl)(bipy)]⁺ (9), although this species was only accessible upon addition of a halide abstracting agent. The dicationic tris(pyridine) adduct [P(ONO)(py)₃ ]²⁺ (10) is also accessible by reaction of 4 with pyridine. Oxidation of 1 using oxygen gas proceeds slowly and allows for the observation of two compounds, a mixed valence dimeric phosphorus(III)/phosphorus(V) compound [P(ONO)(μ² -O)(μ² :κ¹ ,κ² -ONO)P] (11) and the fully oxidized species [P(ONO)(μ² -O)(μ² :κ¹ ,κ² -ONO)P(O)] (12). Finally, reaction of 1 using KC₈ results in the dimerization of the putative radical anion [P(ONO)]^.- through formation of a P-P bond to afford [P(ONO)]₂^2- (13). Reactions with TEMPO result in the formation of the trigonal bipyramidal species P(ONO)(TEMPO)₂ (14).

t-BuOK-mediated reductive addition of P(O)–H compounds to terminal alkynes forming β-arylphosphine oxides

A novel and efficient t-BuOK-mediated reductive addition of P(O)–H compounds to terminal alkynes forming β-arylphosphine oxides was developed. This reaction may proceed via a tandem process involving regio-selective addition and subsequent transfer hydrogenation.

On the Ambiphilic Reactivity of Geometrically Constrained Phosphorus(III) and Arsenic(III) Compounds: Insights into Their Interaction with Ionic Substrates

The ambiphilic nature of geometrically constrained Group 15 complexes bearing the N,N‐bis(3,5‐di‐tert‐butyl‐2‐phenolate)amide pincer ligand (ONO³⁻) is explored. Despite their differing reactivity towards nucleophilic substrates with polarised element–hydrogen bonds (e.g., NH₃), both the phosphorus(III), P(ONO) (1 a), and arsenic(III), As(ONO) (1 b), compounds exhibit similar reactivity towards charged nucleophiles and electrophiles. Reactions of 1 a and 1 b with KOtBu or KNPh₂ afford anionic complexes in which the nucleophilic anion associates with the pnictogen centre ([(tBuO)Pn(ONO)]⁻ (Pn=P (2 a), As (2 b)) and [(Ph₂N)Pn(ONO)]⁻ (Pn=P (3 a), As (3 b)). Compound 2 a can subsequently be reacted with a proton source or benzylbromide to afford the phosphorus(V) compounds (tBuO)HP(ONO) (4 a) and (tBuO)BzP(ONO) (5 a), respectively, whereas analogous arsenic(V) compounds are inaccessible. Electrophilic substrates, such as HOTf and MeOTf, preferentially associate with the nitrogen atom of the ligand backbone of both 1 a and 1 b, giving rise to cationic species that can be rationalised as either ammonium salts or as amine‐stabilised phosphenium or arsenium complexes ([Pn{ON(H)O}]⁺ (Pn=P (6 a), As (6 b)) and [Pn{ON(Me)O}]⁺ (Pn=P (7 a), As (7 b)). Reaction of 1 a with an acid bearing a nucleophilic counteranion (such as HCl) gives rise to a phosphorus(V) compound HPCl(ONO) (8 a), whereas the analogous reaction with 1 b results in the addition of HCl across one of the As−O bonds to afford ClAs{(H)ONO} (8 b). Functionalisation at both the pnictogen centre and the ligand backbone is also possible by reaction of 7 a/7 b with KOtBu, which affords the neutral species (tBuO)Pn{ON(Me)O} (Pn=P (9 a), As (9 b)). The ambiphilic reactivity of these geometrically constrained complexes allows some insight into the mechanism of reactivity of 1 a towards small molecules, such as ammonia and water.

Reactivity Studies on a Diazadiphosphapentalene

The reactivity of diazadiphosphapentalene 1 towards various substrates was investigated. Reaction of 1 with ammonia-borane resulted in transfer hydrogenolysis concomitantly with the cleavage of a P-N bond. By treatment of 1 with 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO), oxidation took place at one of the phosphorus atoms of 1, and a P(V) /P(III) mixed-valence derivative was isolated. At the same time, it was demonstrated that only one of the phosphorus atoms in 1 behaves as an electron donor for electrophiles and Lewis acids. The former afforded an intramolecularly coordinated phosphine-phosphenium species, whereas the latter demonstrates the ligand property of 1. UV irradiation induced rearrangement of 1 into another example of another diazadiphosphapentalene.

Experimental and Computational Evidence for the Reduction Mechanisms of Aromatic N-oxides by Aqueous Fe(II)-Tiron Complex

A combined experimental-theoretical approach was taken to elucidate the reduction mechanisms of five representative aromatic N-oxides (ANOs) by Fe(II)-tiron complex and to identify the rate-limiting step. Based on the possible types of complexes formed with the reductant, three groups of ANOs were studied: type I refers to those forming 5-membered ring complexes through the N and O atoms on the side chain; type II refers to those forming 6-membered ring complexes through the N-oxide O atom and the O atom on the side chain; and type III refers to complexation through the N-oxide O atom only. Density functional theory calculations suggested that the elementary reactions, including protonation, N-O bond cleavage, and the second electron transfer processes, are barrierless, indicating that the first electron transfer is rate-limiting. Consistent with the theoretical results, the experimental solvent isotope effect, KIEH, for the reduction of quinoline N-oxide (a type III ANO) was obtained to be 1.072 ± 0.025, suggesting protonation was not involved in the rate-limiting step. The measured nitrogen kinetic isotope effect, KIEN, for the reduction of pyridine N-oxide (a type III ANO) (1.022 ± 0.006) is in good agreement with the calculated KIEN for its first electron transfer (1.011-1.028), confirming that the first electron transfer is rate-limiting. Electrochemical cell experiments demonstrated that the electron transfer process can be facilitated significantly by type I complexation with FeL2(6-) (1:2 Fe(II)-tiron complex), to some extent by type II complexation with free Fe(II), but not by weak type III complexation.

Ligand coordination modulates reductive elimination from aluminium(iii)

Oxidative addition to low-valent main-group centres is a major class of reactivity for these species. Here, we present a mechanistic study of the much rarer reverse process – reductive elimination – in Al(iii) systems, and unravel ligand effects in this process.

Insight into the reaction mechanisms for oxidative addition of strong σ bonds to an Al(i) center

The oxidative additions of σ X–H bonds to an Al(i) center follow different mechanisms depending on their bonding features and local structural environments.