Control of the Electronic Ground State on an Electron-Transfer Copper Site by Second-Sphere Perturbations

CuA-based chimeric T1 copper sites allow for independent modulation of reorganization energy and reduction potential

Attaining rational modulation of thermodynamic and kinetic redox parameters of metalloproteins is a key milestone towards the (re)design of proteins with new or improved redox functions. Here we report that implantation of ligand loops from natural T1 proteins into the scaffold of a CuA protein leads to a series of distorted T1-like sites that allow for independent modulation of reduction potentials (E°') and electron transfer reorganization energies (λ). On the one hand E°' values could be fine-tuned over 120 mV without affecting λ. On the other, λ values could be modulated by more than a factor of two while affecting E°' only by a few millivolts. These results are in sharp contrast to previous studies that used T1 cupredoxin folds, thus highlighting the importance of the protein scaffold in determining such parameters.

Unexpected electron spin density on the axial methionine ligand in CuA suggests its involvement in electron pathways

The CuA center is a paradigm for the study of long-range biological electron transfer. This metal center is an essential cofactor for terminal oxidases like cytochrome c oxidase, the enzymatic complex responsible for cellular respiration in eukaryotes and in most bacteria. CuA acts as an electron hub by transferring electrons from reduced cytochrome c to the catalytic site of the enzyme where dioxygen reduction takes place. Different electron transfer pathways have been proposed involving a weak axial methionine ligand residue, conserved in all CuA sites. This hypothesis has been challenged by theoretical calculations indicating the lack of electron spin density in this ligand. Here we report an NMR study with selectively labeled methionine in a native CuA. NMR spectroscopy discloses the presence of net electron spin density in the methionine axial ligand in the two alternative ground states of this metal center. Similar spin delocalization observed on two second sphere mutants further supports this evidence. These data provide a novel view of the electronic structure of CuA centers and support previously neglected electron transfer pathways.

Arabidopsis thaliana Hcc1 is a Sco-like metallochaperone for CuA assembly in Cytochrome c Oxidase

The assembly of the Cu_A site in Cytochrome c Oxidase (COX) is a critical step for aerobic respiration in COX-dependent organisms. Several gene products have been associated with the assembly of this copper site, the most conserved of them belonging to the Sco family of proteins, which have been shown to perform different roles in different organisms. Plants express two orthologs of Sco proteins: Hcc1 and Hcc2. Hcc1 is known to be essential for plant development and for COX maturation, but its precise function has not been addressed until now. Here, we report the biochemical, structural and functional characterization of Arabidopsis thaliana Hcc1 protein (here renamed Sco1). We solved the crystal structure of the Cu⁺¹ -bound soluble domain of this protein, revealing a tri coordinated environment involving a CxxxCx_n H motif. We show that AtSco1 is able to work as a copper metallochaperone, inserting two Cu⁺¹ ions into the Cu_A site in a model of CoxII. We also show that AtSco1 does not act as a thiol-disulfide oxido-reductase. Overall, this information sheds new light on the biochemistry of Sco proteins, highlighting the diversity of functions among them despite their high structural similarities. DATABASE: PDB entry 6N5U (Crystal structure of Arabidopsis thaliana ScoI with copper bound).

Biochemistry of Copper Site Assembly in Heme-Copper Oxidases: A Theme with Variations

Copper is an essential cofactor for aerobic respiration, since it is required as a redox cofactor in Cytochrome c Oxidase (COX). This ancient and highly conserved enzymatic complex from the family of heme-copper oxidase possesses two copper sites: Cu_A and Cu_B. Biosynthesis of the oxidase is a complex, stepwise process that requires a high number of assembly factors. In this review, we summarize the state-of-the-art in the assembly of COX, with special emphasis in the assembly of copper sites. Assembly of the Cu_A site is better understood, being at the same time highly variable among organisms. We also discuss the current challenges that prevent the full comprehension of the mechanisms of assembly and the pending issues in the field.

HYSCORE Insights into the Distribution of the Unpaired Spin Density in an Engineered CuA Site in Azurin and Its His120Gly Variant

A comparative study of the ¹H and ¹⁴N hyperfine interactions between the Cu_A site in an engineered Cu_A center in azurin (WT-Cu_AAz) and its His120Gly variant (H120G-Cu_AAz) using the two-dimensional ESEEM technique, HYSCORE, is reported. HYSCORE spectroscopy has clarified conflicting results in previous electron paramagnetic resonance (EPR) and electron nuclear double resonance (ENDOR) studies and found clear differences between the two Cu_A azurins. Specifically, a hyperfine coupling A_N⊥ of 15.3 MHz was determined for the first time from the frequencies of double-quantum transitions of ¹⁴N histidine nitrogens coordinated to Cu_A in WT-Cu_AAz. In contrast, such coupling was not observed in the spectra of H120G-Cu_AAz, indicating at least a several megahertz increase in A_N⊥ for the coordinated nitrogen in this variant. In addition, ¹⁴N HYSCORE spectra of WT-Cu_AAz show interaction with only one type of weakly coupled nitrogen assigned to the remote N_ε atom of coordinated imidazole residues based on the quadrupole coupling constant ( e² Qq/4 h) of ∼0.4 MHz. The spectrum of H120G-Cu_AAz resolves additional features typical for backbone peptide nitrogens with larger e² Qq/4 h values of ∼0.7 MHz. Hyperfine couplings with these nitrogens vary between ∼0.4 and 0.7 MHz. In addition, the two resolved cross-peaks from C_β protons in H120G-Cu_AAz display only ∼1 MHz shifts relative to the corresponding peaks in WT-Cu_AAz. These new findings have provided the first experimental evidence of the previous density functional theory analysis that predicted changes in the delocalized electron spin population of ∼0.02-0.03 (i.e., ∼10%) on copper and sulfur atoms of the Cu_A center in H120 variants relative to WT-Cu_AAz and resolved contradicting results between EPR and ENDOR studies of the valence distribution in Cu_AAz and its variants.

Fine Tuning of Functional Features of the CuA Site by Loop-Directed Mutagenesis

Here we report the spectroscopic and electrochemical characterization of three novel chimeric Cu_A proteins in which either one or the three loops surrounding the metal ions in the Thermus thermophilus protein have been replaced by homologous human and plant sequences while preserving the set of coordinating amino acids. These conservative modifications mimic basic differences between Cu_A sites from different organisms and allow for fine tuning the energy gap between alternative electronic ground states of Cu_A.. This results in a systematic modulation of thermodynamic and kinetic electron transfer (ET) parameters and in the selection of one of two possible redox-active molecular orbitals, which differ in the ET reorganization energy by a factor of 2. Moreover, the ET mechanism is found to be frictionally controlled, and the modifications introduced into the different chimeras do not affect the frictional activation parameter.

Dramatic Electronic Perturbations of CuA Centers via Subtle Geometric Changes

Cu_A is a binuclear copper site acting as electron entry port in terminal heme-copper oxidases. In the oxidized form, Cu_A is a mixed valence pair whose electronic structure can be described using a potential energy surface with two minima, σ_u* and π_u, that are variably populated at room temperature. We report that mutations in the first and second coordination spheres of the binuclear metallocofactor can be combined in an additive manner to tune the energy gap and, thus, the relative populations of the two lowest-lying states. A series of designed mutants span σ_u*/π_u energy gaps ranging from 900 to 13 cm^-1. The smallest gap corresponds to a variant with an effectively degenerate ground state. All engineered sites preserve the mixed-valence character of this metal center and the electron transfer functionality. An increase of the Cu-Cu distance less than 0.06 Å modifies the σ_u*/π_u energy gap by almost 2 orders of magnitude, with longer distances eliciting a larger population of the π_u state. This scenario offers a stark contrast to synthetic systems, as model compounds require a lengthening of 0.5 Å in the Cu-Cu distance to stabilize the π_u state. These findings show that the tight control of the protein environment allows drastic perturbations in the electronic structure of Cu_A sites with minor geometric changes.

Metal cofactors trafficking and assembly in the cell: a molecular view

Metal ions are essential cofactors required by the proteome of organisms from any kingdom of life to correctly exert their functions. Dedicated cellular import, transport and homeostasis systems assure that the needed metal ion is correctly delivered and inserted into the target proteins and avoid the presence of free metal ions in the cell, preventing oxidative damaging. Among metal ions, in eukaryotic organisms copper and iron are required by proteins involved in absolutely essential functions, such as respiration, oxidative stress protection, catalysis, gene expression regulation. Copper and iron binding proteins are localized in essentially all cellular compartments. Copper is physiologically present mainly as individual metal ion. Iron can be present both as individual metal ion or as part of cofactors, such as hemes and iron-sulfur (Fe-S) clusters. Both metal ions are characterized by the ability to cycle between different oxidation states, which enable them to catalyze redox reactions and to participate in electron transfer processes. Here we describe in detail the main processes responsible for the trafficking of copper and iron sulfur clusters, with particular interest for the structural aspects of the maturation of copper and iron-sulfur-binding proteins.

Tuning of Enthalpic/Entropic Parameters of a Protein Redox Center through Manipulation of the Electronic Partition Function

Manipulation of the partition function (Q) of the redox center Cu_A from cytochrome c oxidase is attained by tuning the accessibility of a low lying alternative electronic ground state and by perturbation of the electrostatic potential through point mutations, loop engineering and pH variation. We report clear correlations of the entropic and enthalpic contributions to redox potentials with Q and with the identity and hydrophobicity of the weak axial ligand, respectively.

Probing the role of the backbone carbonyl interaction with the CuA center in azurin by replacing the peptide bond with an ester linkage

The role of a backbone carbonyl interaction with an engineered CuA center in azurin was investigated by developing a method of synthesis and incorporation of a depsipeptide where one of the amide bonds in azurin is replaced by an ester bond using expressed protein ligation. Studies by electronic absorption and electron paramagnetic resonance spectroscopic techniques indicate that, while the substitution does not significantly alter the geometry of the site, it weakens the axial interaction to the CuA center and strengthens the Cu-Cu bond, as evidenced by the blue shift of the near-IR absorption that has been assigned to the Cu-Cu ψ → ψ* transition. Interestingly, the changes in the electronic structure from the replacement did not result in a change in the reduction potential of the CuA center, suggesting that the diamond core structure of Cu2SCys2 is resistant to variations in axial interactions.

Loop recognition and copper-mediated disulfide reduction underpin metal site assembly of CuA in human cytochrome oxidase

Maturation of cytochrome oxidases is a complex process requiring assembly of several subunits and adequate uptake of the metal cofactors. Two orthologous Sco proteins (Sco1 and Sco2) are essential for the correct assembly of the dicopper CuA site in the human oxidase, but their function is not fully understood. Here, we report an in vitro biochemical study that shows that Sco1 is a metallochaperone that selectively transfers Cu(I) ions based on loop recognition, whereas Sco2 is a copper-dependent thiol reductase of the cysteine ligands in the oxidase. Copper binding to Sco2 is essential to elicit its redox function and as a guardian of the reduced state of its own cysteine residues in the oxidizing environment of the mitochondrial intermembrane space (IMS). These results provide a detailed molecular mechanism for CuA assembly, suggesting that copper and redox homeostasis are intimately linked in the mitochondrion.

How structural and physicochemical determinants shape sequence constraints in a functional enzyme

The need for interfacing structural biology and biophysics to molecular evolution is being increasingly recognized. One part of the big problem is to understand how physics and chemistry shape the sequence space available to functional proteins, while satisfying the needs of biology. Here we present a quantitative, structure-based analysis of a high-resolution map describing the tolerance to all substitutions in all positions of a functional enzyme, namely a TEM lactamase previously studied through deep sequencing of mutants growing in competition experiments with selection against ampicillin. Substitutions are rarely observed within 7 Å of the active site, a stringency that is relaxed slowly and extends up to 15–20 Å, with buried residues being especially sensitive. Substitution patterns in over one third of the residues can be quantitatively modeled by monotonic dependencies on amino acid descriptors and predictions of changes in folding stability. Amino acid volume and steric hindrance shape constraints on the protein core; hydrophobicity and solubility shape constraints on hydrophobic clusters underneath the surface, and on salt bridges and polar networks at the protein surface together with charge and hydrogen bonding capacity. Amino acid solubility, flexibility and conformational descriptors also provide additional constraints at many locations. These findings provide fundamental insights into the chemistry underlying protein evolution and design, by quantitating links between sequence and different protein traits, illuminating subtle and unexpected sequence-trait relationships and pinpointing what traits are sacrificed upon gain-of-function mutation.