Catalysis for Total Synthesis: A Personal Account

Organocatalytic Enantioselective Thermal [4 + 4] Cycloadditions

Chiral eight-membered carbocycles are important motifs in organic chemistry, natural product chemistry, chemical biology, and medicinal chemistry. The lack of synthetic methods toward their construction is a challenge preventing their rational design and stereoselective synthesis. The catalytic enantioselective [4 + 4] cycloaddition is one of the most straightforward and atom-economical methods to obtain chiral cyclooctadiene derivatives. We report the first organocatalytic asymmetric [4 + 4] cycloaddition of 9H-fluorene-1-carbaldehydes with electron-deficient dienes affording cyclooctadiene derivatives in good yields and with excellent control of peri-, diastereo-, and enantioselectivities. The reaction concept is based on the aminocatalytic formation of a polarized butadiene component incorporated into a cyclic extended π-system, with restricted conformational freedom, allowing for a stereocontrolled [4 + 4] cycloaddition. FMO analysis unveiled that the HOMO and LUMO of the two reacting partners resemble those of butadiene. The methodology allows for the construction of cyclooctadiene derivatives decorated with various functionalities. The cyclooctadienes were synthetically elaborated, allowing for structural diversity demonstrating their synthetic utility for the formation of, for example, chiral cyclobutene- or cyclooctane scaffolds. DFT computational studies shed light on the reaction mechanism identifying the preference for an initial but reversible [4 + 2] cycloaddition delivering an off-cycle catalyst resting state, from which catalyst elimination is not possible. The off-cycle catalyst-bound intermediate undergoes a retro-[4 + 2] cycloaddition, followed by a [4 + 4] cycloaddition generating a cycloadduct from which catalyst elimination is possible. The reaction pathway accounts for the observed peri-, diastereo-, and enantioselectivity of the organocatalytic [4 + 4] cycloaddition.

Water-Accelerated Decomposition of Olefin Metathesis Catalysts

Water is ubiquitous in olefin metathesis, at levels ranging from contaminant to cosolvent. It is also non-benign. Water-promoted catalyst decomposition competes with metathesis, even for "robust" ruthenium catalysts. Metathesis is hence typically noncatalytic for demanding reactions in water-rich environments (e.g., chemical biology), a challenge as the Ru decomposition products promote unwanted reactions such as DNA degradation. To date, only the first step of the decomposition cascade is understood: catalyst aquation. Here we demonstrate that the aqua species dramatically accelerate both β-elimination of the metallacyclobutane intermediate and bimolecular decomposition of four-coordinate [RuCl(H₂O)_n(L)(=CHR)]Cl. Decomposition can be inhibited by blocking aquation and β-elimination.

Synthesis of Benzofuran Derivates via a Gold-Catalyzed Claisen Rearrangement Cascade

A novel method toward a facile synthesis of diverse benzofuran derivates from easily obtained quinols and alkynyl esters has been reported. A gold-catalyzed intermolecular alkoxylation/Claisen rearrangement/condensation cascade was involved. The introduction of difluorodiphenylsilane as a water-trapping reagent in the reaction leads to a higher yield.

Inorganometallics (Transition Metal-Metalloid Complexes) and Catalysis

While the formation and breaking of transition metal (TM)–carbon bonds plays a pivotal role in the catalysis of organic compounds, the reactivity of inorganometallic species, that is, those involving the transition metal (TM)–metalloid (E) bond, is of key importance in most conversions of metalloid derivatives catalyzed by TM complexes. This Review presents the background of inorganometallic catalysis and its development over the last 15 years. The results of mechanistic studies presented in the Review are related to the occurrence of TM–E and TM–H compounds as reactive intermediates in the catalytic transformations of selected metalloids (E = B, Si, Ge, Sn, As, Sb, or Te). The Review illustrates the significance of inorganometallics in catalysis of the following processes: addition of metalloid–hydrogen and metalloid–metalloid bonds to unsaturated compounds; activation and functionalization of C–H bonds and C–X bonds with hydrometalloids and bismetalloids; activation and functionalization of C–H bonds with vinylmetalloids, metalloid halides, and sulfonates; and dehydrocoupling of hydrometalloids. This first Review on inorganometallic catalysis sums up the developments in the catalytic methods for the synthesis of organometalloid compounds and their applications in advanced organic synthesis as a part of tandem reactions.

The Ascent of Alkyne Metathesis to Strategy-Level Status

For numerous enabling features and strategic virtues, contemporary alkyne metathesis is increasingly recognized as a formidable synthetic tool. Central to this development was the remarkable evolution of the catalysts during the past decades. Molybdenum alkylidynes carrying (tripodal) silanolate ligands currently set the standards; their functional group compatibility is exceptional, even though they comprise an early transition metal in its highest oxidation state. Their performance is manifested in case studies in the realm of dynamic covalent chemistry, advanced applications to solid-phase synthesis, a revival of transannular reactions, and the assembly of complex target molecules at sites, which one may not intuitively trace back to an acetylenic ancestor. In parallel with these innovations in material science and organic synthesis, new insights into the mode of action of the most advanced catalysts were gained by computational means and the use of unconventional analytical tools such as ⁹⁵Mo and ¹⁸³W NMR spectroscopy. The remaining shortcomings, gaps, and desiderata in the field are also critically assessed.

Advances in the E → Z Isomerization of Alkenes Using Small Molecule Photocatalysts

Geometrical E → Z alkene isomerization is intimately entwined in the historical fabric of organic photochemistry and is enjoying a renaissance (Roth et al. Angew. Chem., Int. Ed. Engl. 1989 28, 1193-1207). This is a consequence of the fundamental stereochemical importance of Z-alkenes, juxtaposed with frustrations in thermal reactivity that are rooted in microscopic reversibility. Accessing excited state reactivity paradigms allow this latter obstacle to be circumnavigated by exploiting subtle differences in the photophysical behavior of the substrate and product chromophores: this provides a molecular basis for directionality. While direct irradiation is operationally simple, photosensitization via selective energy transfer enables augmentation of the alkene repertoire to include substrates that are not directly excited by photons. Through sustained innovation, an impressive portfolio of tailored small molecule catalysts with a range of triplet energies are now widely available to facilitate contra-thermodynamic and thermo-neutral isomerization reactions to generate Z-alkene fragments. This review is intended to serve as a practical guide covering the geometric isomerization of alkenes enabled by energy transfer catalysis from 2000 to 2020, and as a logical sequel to the excellent treatment by Dugave and Demange (Chem. Rev. 2003 103, 2475-2532). The mechanistic foundations underpinning isomerization selectivity are discussed together with induction models and rationales to explain the counterintuitive directionality of these processes in which very small energy differences distinguish substrate from product. Implications for subsequent stereospecific transformations, application in total synthesis, regioselective polyene isomerization, and spatiotemporal control of pre-existing alkene configuration in a broader sense are discussed.

Lessons from Natural Product Total Synthesis: Macrocyclization and Postcyclization Strategies

Macrocyclic natural products are plentiful in the bacteria, archaea, and eukaryote domains of life. For the significant advantages that they provide to the producing organisms, evolution has learned how to implement various types of macrocyclization reactions into the different biosynthetic pathways and how to effect them with remarkable ease. Mankind greatly benefits from nature’s pool, not least because naturally occurring macrocycles or derivatives thereof serve as important drugs for the treatment of many serious ailments.

In stark contrast, macrocyclization reactions are usually perceived as difficult to accomplish by purely chemical means. While it is true that ring closure necessarily entails an entropic loss and may result in the buildup of (considerable) ring strain that must be compensated for in one way or the other, it is also fair to note tremendous methodological advances during the last decades that greatly alleviated this traditional “macrocycle challenge”. It is therefore increasingly possible to explore the advantages provided by large as well as medium-size ring systems in a more systematic manner. This venture also holds the promise of increasing the “chemical space” amenable to drug development to a considerable extent.

In consideration of this and other important long-term perspectives, it is appropriate to revisit the current state of the art. To this end, a number of vignettes are presented, each of which summarizes a total synthesis project targeting macrocyclic natural products of greatly different chemotypes using a variety of transformations to reach these goals. Although we were occasionally facing “dead ends”, which are also delineated for the sake of a complete picture, these case studies illustrate the notion that the formation of a certain macrocyclic perimeter is (usually) no longer seriously limiting. In addition to substantial progress in the “classical” repertoire (macrolactonization and macrolactamization (pateamine A, spirastrellolide, and belizentrin)), various metal-catalyzed reactions have arguably led to the greatest leaps forward. Among them, palladium-catalyzed C–C bond formation (roseophilin and nominal xestocyclamine A) and, in particular, alkene and alkyne metathesis stand out (iejimalide, spirastrellolide, enigmazole, ingenamine, and sinulariadiolide). In some cases, different methods were pursued in parallel, thus allowing for a critical assessment and comparison.

To the extent that the macrocyclic challenge is vanishing, the opportunity arises to focus attention on the postmacrocyclization phase. One may stipulate that a well-designed cyclization precursor does not only ensure efficient ring closure but also fosters and streamlines the steps that come after the event. One way to do so is dual (multiple) use in that the functional groups serving the actual cyclization reaction also find productive applications downstream from it rather than being subject to simple defunctionalization. In this context, better insight into the conformational peculiarities of large rings and the growing confidence in their accessibility in a stereochemically well defined format rejuvenate the implementation of transannular reactions or reaction cascades that can lead to rapid and substantial increases in molecular complexity. The examples summarized herein showcase such possibilities, with special emphasis on tranannular gold catalysis and the emerging ruthenium-catalyzed trans-hydrometalation chemistry for the selective functionalization of alkynes.

The Impact of Water on Ru-Catalyzed Olefin Metathesis: Potent Deactivating Effects Even at Low Water Concentrations

Ruthenium catalysts for olefin metathesis are widely viewed as water-tolerant. Evidence is presented, however, that even low concentrations of water cause catalyst decomposition, severely degrading yields. Of 11 catalysts studied, fast-initiating examples (e.g., the Grela catalyst RuCl2(H2IMes)(=CHC6H4-2-O i Pr-5-NO2) were most affected. Maximum water tolerance was exhibited by slowly initiating iodide and cyclic (alkyl)(amino)carbene (CAAC) derivatives. Computational investigations indicated that hydrogen bonding of water to substrate can also play a role, by retarding cyclization relative to decomposition. These results have important implications for olefin metathesis in organic media, where water is a ubiquitous contaminant, and for aqueous metathesis, which currently requires superstoichiometric "catalyst" for demanding reactions.

From Target-Oriented to Motif-Oriented: A Case Study on Nannocystin Total Synthesis

Natural product total synthesis is in essence target-oriented in that a set of organic transformations are orchestrated into a workable process, leading ultimately to the target molecule with a predefined architecture. For a bioactive lead, proof of synthetic viability is merely the beginning. Ensuing effort repurposes the initial synthesis for structural diversification in order to probe structure-activity relationship (SAR). Yet accessibility is not equal to flexibility; moving from convergency to divergency, it is not always feasible to explore the chemical space around a particular substructure of interest simply by tweaking an established route. In this situation, the motif-oriented strategy becomes a superior choice, which gives priority to synthetic flexibility at the concerned site such that a route is adopted only if it is capable of implementing diversification therein. This strategy was recently devised by Fürstner et al., enabling them to achieve total synthesis of both natural and non-natural nannocystins varied at an otherwise challenging position. The present review examines seven distinctive nannocystin total syntheses reported thus far and showcases the merits of conventional (target-oriented) as well as motif-oriented strategies, concluding that these two approaches complement each other and are both indispensable for natural product based drug discovery.

Gold-Catalyzed Intramolecular Dearomatization Reactions of Indoles for the Synthesis of Spiroindolenines and Spiroindolines

A gold-catalyzed dearomatization reaction of indole derivatives was realized in the presence of JohnPhosAuCl/AgOMs to afford a series of spiroindolenines in excellent yields (≤99%). In addition, when the Hantzsch ester was used as the hydrogen transfer reagent, various spiroindolines were obtained in a cascade fashion starting from readily available indole derivatives in modest to good yields (≤79%). Both reactions feature readily available substrates, mild conditions, and good functional group tolerance.

Regio- and Diastereoselective Iron-Catalyzed [4+4]-Cycloaddition of 1,3-Dienes

A family of single-component iron precatalysts for the [4+4]-cyclodimerization and intermolecular cross-[4+4]-cycloaddition of monosubstituted 1,3-dienes is described. Cyclooctadiene products were obtained with high regioselectivity, and catalyst-controlled access to either cis- or trans-diastereomers was achieved using 4-substituted diene substrates. Reactions conducted either with single-component precatalysts or with iron dihalide complexes activated in situ proved compatible with common organic functional groups and were applied on multigram scale (up to >100 g). Catalytically relevant, S = 1 iron complexes bearing 2-(imino)pyridine ligands, (^RPI)FeL₂ (^RPI = [2-(2,6-R₂-C₆H₃-N═CMe)-C₅H₄N] where R = ⁱPr or Me, L₂ = bis-olefin), were characterized by single-crystal X-ray diffraction, Mößbauer spectroscopy, magnetic measurements, and DFT calculations. The structural and spectroscopic parameters are consistent with an electronic structure description comprised of a high spin iron(I) center ( S_Fe = 3/2) engaged in antiferromagnetically coupling with a ligand radical anion ( S_PI = -1/2). Mechanistic studies conducted with these single-component precatalysts, including kinetic analyses, ¹²C/¹³C isotope effect measurements, and in situ Mößbauer spectroscopy, support a mechanism involving oxidative cyclization of two dienes that determines regio- and diastereoselectivity. Topographic steric maps derived from crystallographic data provided insights into the basis for the catalyst control through stereoselective oxidative cyclization and subsequent, stereospecific allyl-isomerization and C-C bond-forming reductive elimination.

Expanding the limits of catalysts with low-valent main-group elements for the hydroboration of aldehydes and ketones using [L†Sn(ii)][OTf] (L† = aminotroponate; OTf = triflate)

A triflatostannylene [L^†Sn][OTf] (2) is found to be an efficient catalyst with low-valent main-group element for the hydroboration of aldehydes and ketones.

Dearomatization of Indole via Intramolecular [3 + 2] Cycloaddition: Access to the Pentacyclic Skeleton of Strychons Alkaloids

An efficient method to build various multisubstituted polycyclic indoline-annulated normal to medium-size rings through dearomatization of indole via a tandem 1,2-acyloxy migration/intramolecular [3 + 2] cycloaddition process is described. The pentacyclic skeleton of strychnine could be synthesized via this tandem cycloaddition and a further Mannich reaction. This approach would provide a novel strategy to the synthesis of strychons alkaloids.

A 11-Steps Total Synthesis of Magellanine through a Gold(I)-Catalyzed Dehydro Diels-Alder Reaction

We have developed an innovative strategy for the formation of angular carbocycles via a gold(I)-catalyzed dehydro Diels-Alder reaction. This transformation provides rapid access to a variety of complex angular cores in excellent diastereoselectivities and high yields. The usefulness of this Au^I -catalyzed cycloaddition was further demonstrated by accomplishing a 11-steps total synthesis of (±)-magellanine.

Synthetic, structural and magnetic implications of introducing 2,2′-dipyridylamide to sodium-ferrate complexes

Establishing transamination as an efficient method to access novel heterobimetallic complexes, this study provides magnetic and structural insights of 2,2-dipyridylamide based sodium ferrate complexes.

Iron-catalyzed C–H/N–H activation by triazole guidance: versatile alkyne annulation

Iron-catalyzed C–H/N–H functionalizations were achieved by the aid of modular triazole amides.

Perspectives on metal–organic frameworks with intrinsic electrocatalytic activity

This highlight article focuses on the rapidly emerging area of electrocatalytic metal–organic frameworks (MOFs) with a particular emphasis on those systems displaying intrinsic activity.

Stereospecific Synthesis of Fluoroalkenes by Silver-Mediated Fluorination of Functionalized Alkenylstannanes

The known procedures for the conversion of alkenylstannanes into the corresponding fluoroalkenes suffer from largely variable yields and a limited compatibility with functional groups; most notably, protodestannation becomes a serious issue whenever protic sites are present in the substrate. Outlined in this paper is a convenient alternative with a much improved application profile, which is largely unperturbed by free alcohols and amides of all sorts. Key to success is the use of F-TEDA-PF₆ in combination with non-hygroscopic and bench-stable silver phosphinate (AgOP(O)Ph₂ ) that acts as an essentially neutral, non-nucleophilic promotor and effective tin-scavenger at the same time. This new method opens many opportunities for late-stage fluorination of elaborate compounds far beyond the scope of the literature procedures, as witnessed by the preparation of a fluorinated macrolide antibiotic, a fluorinated prostaglandin derivative, and a set of fluorinated amino acid surrogates and peptide isosteres.

Photochemical Approaches to Complex Chemotypes: Applications in Natural Product Synthesis

The use of photochemical transformations is a powerful strategy that allows for the formation of a high degree of molecular complexity from relatively simple building blocks in a single step. A central feature of all light-promoted transformations is the involvement of electronically excited states, generated upon absorption of photons. This produces transient reactive intermediates and significantly alters the reactivity of a chemical compound. The input of energy provided by light thus offers a means to produce strained and unique target compounds that cannot be assembled using thermal protocols. This review aims at highlighting photochemical transformations as a tool for rapidly accessing structurally and stereochemically diverse scaffolds. Synthetic designs based on photochemical transformations have the potential to afford complex polycyclic carbon skeletons with impressive efficiency, which are of high value in total synthesis.

Gold(I)-Catalyzed N-Desulfonylative Amination versus N-to-O 1,5-Sulfonyl Migration: A Versatile Approach to 1-Azabicycloalkanes

Valuable 1-azabicycloalkane derivatives have been synthesized through a novel gold(I)-catalyzed desulfonylative cyclization strategy. An ammoniumation reaction of ynones substituted at the 1-position with an N-sulfonyl azacycle took place in the presence of a gold cation by intramolecular cyclization of the disubstituted sulfonamide moiety onto the triple bond. Depending on the size of the heterocyclic ring and substitution of the substrates, two unprecedented forms of nucleophilic attack on the sulfonyl group were exploited, that is, a N-desulfonylation in the presence of an external protic O nucleophile (37-87 %, 10 examples) and a unique N-to-O 1,5-sulfonyl migration (60-98 %, 9 examples).

Hydroxyl-Assisted Carbonylation of Alkenyltin Derivatives: Development and Application to a Formal Synthesis of Tubelactomicin A

Alkenyltin derivatives flanked by a hydroxyl group are subject to methoxycarbonylation when treated with catalytic amounts of Pd(OAc)2 and Ph3As in MeOH under a CO atmosphere; key to success is the use of 1,4-benzoquinone as a stoichiometric oxidant in combination with trifluoroacetic acid as a cocatalyst. The acid lowers the LUMO of the quinone and likely marshals the critical assembly of the substrates. Under the optimized conditions, competing proto-destannation is marginal; the method proved compatible with various (acid sensitive) functional groups and was applied to a short formal total synthesis of the antibiotic tubelactomicin A.