Multipore zeolites: synthesis and catalytic applications

Zeolite-Templated Carbons Supported Rh and Ru Electrocatalysts for Highly Active Hydrogen Evolution Reaction

Here, we report the systematical synthesis of zeolite-templated carbon (ZTC) supported Ru and Rh mono- or bi-metallic electrocatalysts towards hydrogen evolution reaction (HER). The zeolite A or ZSM-5 derived ZTC supports and metal sites were adjusted, and all electrocatalysts outperformed the commercial Pt/C electrocatalyst for HER performance. In particular, the RhRu/(ZTC/ZSM5) sample exhibited superior catalytic performance with the overpotential of 24.8 mV@10 mA ⋅ cm-2, and outstanding stability with 1 mV drop after 20000 cyclic voltammetry circles. This work offers a simple impregnation method for the synthesis of highly performed HER electrocatalysts supported on porous zeolite-templated carbon.

Construction of diverse hollow MFI zeolites through regulating the micropore filling agents

Constructing hollow structure into microporous zeolites can improve the accessibility of acid sites located at the inner part and the diffusion property. Hence, the development of an efficient synthesis strategy to acquire zeolites with tunable hollow structures and acidity has attracted much attention. In this work, an innovative tandem synthesis route was proposed to prepare MFI zeolites with diverse hollow structure while maintaining solid yields exceeding 90 %. The substitution of ethanol molecules, which previously occupied the micropores, with tetrapropylammonium cations was proved to be the key factor to construct hollow structure. And a crystallization-driven particle dissolution mechanism was proposed. The dimension of the hollow cavity, particle size, and Si/Al ratio can be flexibly regulated. Interestingly, hollow MFI samples featuring the common cavity structure, "eye-like" cavity structure, or double-cavity structure can be directly synthesized by controlling the dissolution of core parts. In the 1-butene catalytic cracking reactions, a much higher conversion of 67.2 % was acquired over hollow ZSM-5 compared with that over conventional ZSM-5 (35.8 %) after 64 h of reaction. This improvement can be attributed to the eightfold increase of diffusivity in hollow ZSM-5. This facile and efficient synthesis method endows accurate regulation of the hollow structure, which is meaningful for both fundamental research and industrial applications of hollow zeolites.

Controlling Crystal Morphology of Anisotropic Zeolites with Elemental Composition

The morphology of zeolite crystals strongly affects their textural, catalytic, and mechanical attributes. However, controlling zeolite crystal morphology without using modifiers or structure-directing agents remains a challenging task because of our limited understanding of the relationships between zeolite crystal shape, crystallization mechanism, and composition of the starting synthesis mixture. In this study, we aimed at developing a general method for controlling the morphology of zeolites by assessing the impact of the Si/T molar ratio of the synthesis gel on the growth rate of zeolite crystals in various crystallographic directions and on the final crystal morphology of the UTL germanosilicate with a 2D system of intersecting 14- and 12-ring pores. Our results showed that flat UTL crystals progressively thicken with the Si/Ge molar ratio, demonstrating that Ge concentration controls the relative rate of crystal growth in the perpendicular direction to the pore system. The morphology of other zeolites and zeotypes with an anisotropic structure, including AFI (12R), IFR (12R), MWW (10-10R), and IWW (12-10-8R), can also be predicted based on their Si/T ratio, suggesting a systematic pattern across zeolite structures and in a wide range of zeolite framework elements. Combined, these findings introduce a facile and cost-efficient method for directly controlling crystal morphology of zeolites with anisotropic structures with a high potential for scale-up while providing further insights into the role of elemental composition in zeolite crystal growth.

A Stable Extra-Large Pore and High-Silica Zeolite Derived from Ge-Rich Precursor

A multidimensional extra-large pore zeolite with highly hydrothermal stability, denoted as -IRT-HS, has been developed successfully, starting from Ge-rich germanosilicate precursor hydrothermally directed by a small and commercially available piperidinium-type organic structure-directing agent (OSDA). -IRT-HS, with the supermicropores, is structurally analogues to 28-membered ring -IRT topology as confirmed by various spectroscopic techniques. And it is the high-silica (Si/Ge=58) zeolite with the largest pore size as well. Notably, using acid-washed as-made Ge-rich -IRT precursor as the silicon source is crucial to restore partially collapsed structure into a stable framework by OSDA-assisted recrystallization. The calcined -IRT-HS maintains a high crystallinity, even when stored in a humid environment for extended periods or directly exposed to water. Additionally, high silica Al-containing analogue is also readily synthesized, serving as an active solid-acid catalyst in 1,3,5-triisopropylbenzene cracking reaction, yielding an impressive initial conversion up to 76.1 % much higher than conventional large-pore Beta zeolite (30.4 %). This work will pave the way for the designed synthesis of targeted high-silica zeolites with stable and extra-large pore frameworks, mimicking the structures of existing Ge-rich counterparts.

Accurate Measurements of NH3 Differential Adsorption Heat Unveil Structural Sensitivity of Brønsted Acid and Brønsted/Lewis Acid Synergy in Zeolites

Differential adsorption heats of NH3 on a series of zeolites, including MOR, MFI, FER, and BEA, are accurately measured to probe their acidity using flow-pulse adsorption microcalorimetry. Initial adsorption heats of NH3 at Brønsted acid sites (BAS) vary between 105 to 136 kJ/mol, depending on framework aluminum amounts and topography structures of zeolites. A Brønsted/Lewis acid synergy between BAS and proximate tricoordinated framework-associated aluminum species is identified to generate super acid sites with initial adsorption heats of NH3 around 150 kJ/mol, but occurs only in the MFI zeolites and sensitively depends on the Si/Al ratio. These accurate data of NH3 differential adsorption heats unveil structural sensitivity of BAS and Brønsted/Lewis acid synergy in zeolites and provide experimental benchmark data for fundamental understanding of acidity and acid-catalysis of zeolites.

Double Four Ring Units-Containing Zeolites: Synthesis, Structural Modification and Catalytic Applications

In zeolite frameworks, double four-ring (d4r) configurations are among the most frequent composite building units. The composition variations in d4r units greatly influence the energy and structural modifiability of the zeolitic framework. The introduction of germanium, with a larger ionic radius than silicon or aluminum, not only reduces the energy constraints of d4r in the nucleation and crystal growth of zeolites, but also opens a new window for constructing novel crystalline structures, especially with large or extra-large pores and channels. Ge-enriched d4r units endow germanosilicates with structure diversity readily for post treatments. Promising catalytic materials have been gradually developed and increasingly studied by direct synthesis or post-synthetic isomorphous substitution for Ge. This review focuses on the recent progress in the synthesis, modification, and catalytic application of d4r-containing zeolites, including germanosilicates, aluminosilicates, and silicates.

In Situ Synthesis of Encapsulated Pd@silicalite-2 for Highly Stable Methane Catalytic Combustion

Methane emissions from vehicles have made a significant contribution to the greenhouse effect, primarily due to its high global warming potential. Supported noble metal catalysts are widely employed in catalytic combustion of methane in vehicles, but they still face challenges such as inadequate low-temperature activity and deactivation due to sintering under harsh operating conditions. In the present work, a series of encapsulated structured catalysts with palladium nanoparticles confined in hydrophobic silicalite-2 were prepared by an in situ synthesis method. Based on various characterization methods, including XRD, HR-TEM, XPS, H2-TPR, O2-TPD, H2O-TPD, CH4-TPR, Raman, and in situ DRIFTS-MS, it was confirmed that PdOx nanoparticles were mainly encapsulated inside the silicalite-2 zeolite, which further maintained the stability of the nanoparticles under harsh conditions. Specifically, the 3Pd@S-2 sample exhibited high catalytic activity for methane oxidation even after harsh hydrothermal aging at 750 °C for 16 h and maintained long-term stability at 400 °C for 130 h during wet methane combustion. In situ Raman spectroscopy has confirmed that PdOx species act as active species for methane oxidation. During this reaction, methane reacts with PdOx to produce CO2 and H2O, while simultaneously reducing PdOx to metallic Pd species, which is further reoxidized by oxygen to replenish the PdOx catalyst.

Fabrication of mesopore-rich HZSM-5 to boost the degradation of plastic wastes

Plastic waste is causing serious environment pollution and its efficient disposal is attracting more and more attention. The use of catalysts not only reduced the degradation temperature of plastic wastes but also facilitated the production of valuable chemicals. Herein, mesopores were introduced into HZSM-5 zeolites by alkali and acid treatment, which was expected to eliminate the diffusion resistance caused by bulky polymer molecules and improve the catalytic activity. It was found that HZSM-5 zeolites enhanced PE, PP and PS degradation, and an increase of mesopore volume further improved the catalytic activity and reduced the activation energy. For example, the use of HZSM-5 in PP degradation decreased the activation energy from 146.9 kJ mol-1 to 93.1 kJ mol-1, and mesopore-rich HZSM-5 further decreased the activation energy to 84.0 kJ mol-1. The molecular diameter of the PP fragment was obtained by theoretical calculations, and it was close to 1.6 nm, which was significantly higher than the micropore diameter of HZSM-5 zeolites (0.5-0.6 nm) while lower than the mesopore diameter. It was concluded that the presence of mesopores provided the place and space for plastics degradation.

Molecular Views on Mechanisms of Brønsted Acid-Catalyzed Reactions in Zeolites

The Brønsted acidity of proton-exchanged zeolites has historically led to the most impactful applications of these materials in heterogeneous catalysis, mainly in the fields of transformations of hydrocarbons and oxygenates. Unravelling the mechanisms at the atomic scale of these transformations has been the object of tremendous efforts in the last decades. Such investigations have extended our fundamental knowledge about the respective roles of acidity and confinement in the catalytic properties of proton exchanged zeolites. The emerging concepts are of general relevance at the crossroad of heterogeneous catalysis and molecular chemistry. In the present review, emphasis is given to molecular views on the mechanism of generic transformations catalyzed by Brønsted acid sites of zeolites, combining the information gained from advanced kinetic analysis, in situ, and operando spectroscopies, and quantum chemistry calculations. After reviewing the current knowledge on the nature of the Brønsted acid sites themselves, and the key parameters in catalysis by zeolites, a focus is made on reactions undergone by alkenes, alkanes, aromatic molecules, alcohols, and polyhydroxy molecules. Elementary events of C-C, C-H, and C-O bond breaking and formation are at the core of these reactions. Outlooks are given to take up the future challenges in the field, aiming at getting ever more accurate views on these mechanisms, and as the ultimate goal, to provide rational tools for the design of improved zeolite-based Brønsted acid catalysts.

Synthesis strategies to control the Al distribution in zeolites: thermodynamic and kinetic aspects

The activity and selectivity of acid-catalyzed chemistry is highly dependent on the Brønsted and Lewis acid sites generated by Al substitutions in a zeolite framework with the desired pore architecture. The siting of two Al atoms in close proximity in the framework of high-silica zeolites can also play a decisive role in improving the performance of redox catalysts by producing exchangeable positions for extra-framework multivalent cations. Thus, considerable attention has been devoted to controlling the Al incorporation through direct synthesis approaches and post-synthesis treatments to optimize the performance as (industrial) solid catalysts and to develop new acid- and redox-catalyzed reactions. This Feature Article highlights bottom-up synthetic strategies to fine-tune the Al incorporation in zeolites, interpreted with respect to thermodynamic and kinetic aspects. They include (i) variation in extra-framework components in zeolite synthesis, (ii) isomorphous substitution of other heteroatoms in the zeolite framework, and (iii) control over the (alumino)silicate network in the initial synthesis mixture via in situ and ex situ methods. Most synthetic approaches introduced here tentatively showed that the energy barriers associated with Al incorporation in zeolites can be variable during zeolite crystallization processes, occurring in complex media with multiple chemical interactions. Although the generic interpretation of each strategy and underlying crystallization mechanism remains largely unknown (and often limited to a specific framework), this review will provide guidance on more efficient methods to prepare fine-tuned zeolites with desired chemical properties.

Gadolinium-loaded LTL nanosized zeolite for efficient oxygen delivery and magnetic resonance imaging

The search for efficient gas carriers for biomedical applications presents a challenging task due to the kinetics of gas adsorption/desorption. This article presents a novel approach utilizing Gd-LTL zeolite crystals for oxygen delivery combined with an MRI study.

Direct synthesis of ultrathin FER zeolite nanosheets via a dual-template approach

The synthesis of zeolites with nanosheet morphology has been attracting extensive attention. Despite the steady progress, the direct synthesis of ultrathin nanosheets of FER zeolite with thickness of less than 10 nm is still a great challenge. Herein we report a facile synthesis of FER zeolite nanosheets (named SCM-37) by using octyltrimethylammonium chloride (OTMAC) and 4-dimethylaminopyridine (4-DMAP) as dual organic templates. The effects of synthesis parameters, including initial molar ratio of SiO2/Al2O3, crystallization temperature and time were investigated. It turned out that the crystallization field of SCM-37 was narrow. A two-step crystallization method was utilized to obtain pure and completely crystallized SCM-37 zeolite. SCM-37 was characterized by multiple techniques, including X-ray powder diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), nitrogen physisorption, Fourier transform infrared (FTIR), ammonia-temperature programmed desorption (NH3-TPD) and nuclear magnetic resonance (NMR), and compared with the conventional FER zeolite (C-FER). The two most significant features of SCM-37 are the ultrathin crystal nanosheet and extremely high external surface area. The thickness of SCM-37 along the a-axis is 4∼7 nm, while that of C-FER is over 20 nm. The external surface area reaches 198 m2 g-1, which is over ten times larger than that of C-FER. The catalytic performances of the FER zeolites were evaluated by the cracking of 1,3,5-triisopropylbenzene (TiPB). Although possessing a lower amount of total acid sites, SCM-37 showed higher conversion of TiPB, as well as selectivity to the deep cracking products. The superior performance of SCM-37 was attributed to the higher external surface area arising from the ultrathin nanosheets.

Designing Sites in Heterogeneous Catalysis: Are We Reaching Selectivities Competitive With Those of Homogeneous Catalysts?

A critical review of different prominent nanotechnologies adapted to catalysis is provided, with focus on how they contribute to the improvement of selectivity in heterogeneous catalysis. Ways to modify catalytic sites range from the use of the reversible or irreversible adsorption of molecular modifiers to the immobilization or tethering of homogeneous catalysts and the development of well-defined catalytic sites on solid surfaces. The latter covers methods for the dispersion of single-atom sites within solid supports as well as the use of complex nanostructures, and it includes the post-modification of materials via processes such as silylation and atomic layer deposition. All these methodologies exhibit both advantages and limitations, but all offer new avenues for the design of catalysts for specific applications. Because of the high cost of most nanotechnologies and the fact that the resulting materials may exhibit limited thermal or chemical stability, they may be best aimed at improving the selective synthesis of high value-added chemicals, to be incorporated in organic synthesis schemes, but other applications are being explored as well to address problems in energy production, for instance, and to design greener chemical processes. The details of each of these approaches are discussed, and representative examples are provided. We conclude with some general remarks on the future of this field.

Zeo-1, a computational data set of zeolite structures

Fast, empirical potentials are gaining increased popularity in the computational fields of materials science, physics and chemistry. With it, there is a rising demand for high-quality reference data for the training and validation of such models. In contrast to research that is mainly focused on small organic molecules, this work presents a data set of geometry-optimized bulk phase zeolite structures. Covering a majority of framework types from the Database of Zeolite Structures, this set includes over thirty thousand geometries. Calculated properties include system energies, nuclear gradients and stress tensors at each point, making the data suitable for model development, validation or referencing applications focused on periodic silica systems.

Ba2Bi2[Zn(PO4)4]: ionic-isolation-activated first barium bismuth zincophosphate with unprecedented ∞[Zn(PO4)4]10− chains and balanced overall performance

The combination of ion-mixing and anionic condensation has activated the first barium bismuth zincophosphate of Ba2Bi2[Zn(PO4)4] with unprecedented ∞[Zn(PO4)4]10− chains and balanced overall performance.

Synthesis and structure of the medium-pore zeolite PST-35 with two interconnected cages of unusual orthorhombic shape

The search for new zeolite structures and compositions remains important in synthetic materials science due to the high impact on developing new chemical technologies, as well as on improving existing ones. Herein we present the synthesis and structure of PST-35, a novel medium-pore germanosilicate (Si/Ge = 2.1–6.6) zeolite, achieved by combining the excess fluoride approach and the unique structure directing ability of Ge in the presence of 1,2,3-triethylimidazolium ions as an organic structure-directing agent. PST-35 contains a zig-zag 10-ring (4.6 × 6.7 Å) channel system constructed of strictly alternating large 28-hedral ([4⁸·5⁸·6⁸·8²·10²]) and smaller 18-hedral ([4⁶·5⁴·6⁴·8²·10²]) cages of anomalous orthorhombic shape. The PST-35 structure is built from the connection of pst-35 layers consisting of small 8-hedral ([4³·5⁴·6]) cages, previously unobserved zeolite building layers, through single 4-rings.

A medium-pore zeolite containing 2 novel orthorhombic-shaped cages was synthesized by combining the tendency of Ge to form double 4-ring units with the structure-directing ability of 1,2,3-triethylimidazolium ions under excess fluoride conditions.

Clean Synthesis of Ti-MWW by Utilizing the Recycled Mother Liquor

This article introduces a clean and efficient method for the synthesis of Ti-MWW by utilizing the recycled mother liquor. The effects of titanium and silicon sources on the synthesis of Ti-MWW and the recycling of the mother liquor are discussed in detail. Precipitated silica prepared with Na₂SiO₃ and CO₂ was selected as the silicon source, and TiCl₃ was selected as the titanium source. The mother liquor was recycled five times, and the obtained samples showed good catalytic activity in cyclohexanone ammoximation. This work can be conducive to reducing the influence on the environment and economizing on materials for the industrial production of Ti-MWW.

Effects of Si/Al Ratios on the Bulk-Type Zeolite Formation Using Synthetic Metakaolin-Based Geopolymer with Designated Composition

In this paper, synthetic metakaolin with fixed composition (Al2O3·2SiO2) was produced by a simple chemosynthetic route. The chemosynthetic metakaolin can eliminate the influence of impurities in metakaolin from natural kaolin minerals. The synthetic metakaolin together with NaOH and SiO2-sol were used to prepare Na-based geopolymer precursors with various molar ratios of Si/Al. The molar ratios of Si/Al from 1 to 2 were tailored by adding different contents of SiO2-sol. Zeolite/geopolymer composites or monolith-type zeolite were successfully fabricated from synthetic metakaolin-based geopolymer through a hydrothermal process. The effects of Si/Al ratios on the phase composition and microstructure of the produced zeolite/geopolymer composites or zeolites were studied. The results proved that the composition of synthetic metakaolin and geopolymer precursors can be facilely tuned, and the monolithic geopolymer precursors can be mostly, or even totally, transformed into zeolite after hydrothermal treatment.

Activation and conversion of alkanes in the confined space of zeolite-type materials

Microporous zeolite-type materials, with crystalline porous structures formed by well-defined channels and cages of molecular dimensions, have been widely employed as heterogeneous catalysts since the early 1960s, due to their wide variety of framework topologies, compositional flexibility and hydrothermal stability. The possible selection of the microporous structure and of the elements located in framework and extraframework positions enables the design of highly selective catalysts with well-defined active sites of acidic, basic or redox character, opening the path to their application in a wide range of catalytic processes. This versatility and high catalytic efficiency is the key factor enabling their use in the activation and conversion of different alkanes, ranging from methane to long chain n-paraffins. Alkanes are highly stable molecules, but their abundance and low cost have been two main driving forces for the development of processes directed to their upgrading over the last 50 years. However, the availability of advanced characterization tools combined with molecular modelling has enabled a more fundamental approach to the activation and conversion of alkanes, with most of the recent research being focused on the functionalization of methane and light alkanes, where their selective transformation at reasonable conversions remains, even nowadays, an important challenge. In this review, we will cover the use of microporous zeolite-type materials as components of mono- and bifunctional catalysts in the catalytic activation and conversion of C₁⁺ alkanes under non-oxidative or oxidative conditions. In each case, the alkane activation will be approached from a fundamental perspective, with the aim of understanding, at the molecular level, the role of the active sites involved in the activation and transformation of the different molecules and the contribution of shape-selective or confinement effects imposed by the microporous structure.

An intrinsic synthesis parameter governing the crystallization of silico(zinco)aluminophosphate molecular sieves

One of the most fundamental but yet unanswered questions in the synthesis of zeolites and zeolite-like materials is whether or not any parameter controlling the microporosity of the crystallized product from synthesis mixtures with feasible chemical compositions exists. Here we report that an experimentally optimized parameter (ca. 3.3 ≤ MOH/P₂O₅ ≤ 5.3, where M is alkali metal ions) is the criterion bringing about the successful formation of various high-charge-density silicoaluminophosphate (SAPO) and zincoaluminophosphate (ZnAPO) molecular sieves, without the aid of organic structure-directing agents. The materials obtained using this empirical concept include SAPO molecular sieves with CHA and LTA topologies, as well as a SAPO FAU/EMT intergrowth, and ZnAPO ones with CZP and SOD topologies. This study demonstrates the existence of an essential factor determining not only phase selectivity but also microporosity (0.3-2 nm) in the synthesis of zeotypes with charged frameworks which may offer interesting opportunities for more efficiently producing novel zeolite structures and/or compositions.

From K[ZnBP2O8] to K[(Zn0.5Al0.5)2P2O8]: Substitution-Induced Microporous Zincoaluminophosphate with a Congruent-Melting Behavior

An open-frame aluminophosphate, K[(Zn_0.5Al_0.5)₂P₂O₈] (KZAPO), was rationally designed by a substitution design strategy and synthesized by a high-temperature molten salt method. Compared with the parent crystal of K[ZnBP₂O₈], KZAPO was characterized by similar 4 × 8 × 8 networks, a comparable short-wave ultraviolet transparency and a more regular tetrahedral frame with the mixing of (ZnO₄)^6- and (AlO₄)^5- anionic groups, highlighting the multifunctional roles that anionic group mixing played in structural and property modulations. In particular, KZAPO was characterized by a high thermal stability (over 850 °C) and a congruent-melting behavior, being conducive to practical applications.

Organic Structure-Directing Agent-Free Synthesis of Mordenite-Type Zeolites Driven by Al-Rich Amorphous Aluminosilicates

Mordenite (MOR)-type zeolites with a Si/Al molar ratio of up to 13 with crystallite sizes of ca. 60 nm were successfully synthesized from Al-rich aluminosilicates with a Si/Al ratio of 2 and additional SiO₂ under seed-assisted hydrothermal conditions for 6 h or longer without any organic structure-directing agents (OSDAs). In stark contrast, under the same hydrothermal conditions for 6 h, control experiments using starting reagent(s), such as Al-poor aluminosilicate, pure SiO₂, tetraethyl orthosilicate, and Al(NO₃)₃, all of which are typically employed for zeolite synthesis, failed to yield MOR-type zeolites. The penta-coordinated Al species, which are present in Al-rich aluminosilicates and are more reactive than the tetra- and hexa-coordinated Al species typically found in alumina and Al-poor aluminosilicates, played a decisive role in the OSDA-free synthesis of MOR-type zeolites.

An Aluminosilicate Zeolite Containing Rings of Tetrahedral Atoms with All Odd Numbers from Five to Eleven

Herein we report the synthesis, structure solution, and catalytic properties of PST-31, which has an unprecedented framework topology. This high-silica (Si/Al=16) zeolite was synthesized using a pyrazolium-based dication with a tetramethylene linker as an organic structure-directing agent (OSDA) in hydroxide media. The PST-31 structure is built from new building layers containing four-, five-, six-, and seven-membered rings, which are connected by single four-membered rings in the interlayer region to form a two-dimensional pore system. Its channels consist of [4.5⁶ .6.9.11] and [5.6.7.9.10.11] cavities and are thus delimited by nine-, ten-, and eleven-membered rings. The OSDA cations in as-synthesized PST-31 were determined to reside without disorder in the large [4² .5¹⁴ .6⁴ .7² .9⁴ ] cavities composed of smaller [4.5⁶ .6.9.11] and [5.6.7.9.10.11] ones, leading to a symmetry coincidence between the OSDA and the surrounding zeolite cavity. The proton form of PST-31 was found to be selective for the cracking of n-hexane to light olefins.

Recent progress and perspectives on the structural design on metal-organic zeolite (MOZ) frameworks

As a typical group of coordination polymers, metal-organic zeolite (MOZs) frameworks inherit the topological and structural advantages of inorganic zeolites and display great application potential in many areas, including gas adsorption/separation, catalysis, luminescence and chemical sensing. In this review, we outline the recent progress in the synthesis, functionalization and application of metal-organic zeolite frameworks, mainly focusing on the basic structural design principle and synthesis strategy on 4-connect inorganic nodes and 2-connect organic linkers. Employing different valent metals, small inorganic TO₄^2- units and high-nuclear clusters as 4-connect nodes, we derived multi-types of MOZs with a modified framework charge, improved stability and enhanced photo-/eletrocatalytic activity. Besides, the selection, functionalization and defect-engineering on the 2-connect ligands generated different topological and functional MOZs. Finally, the future trends and some perspectives in this area are outlined.

Recent progress in the design and synthesis of zeolite-like metal–organic frameworks (ZMOFs)

ZMOFs are a subset of MOFs that exhibit zeolite-like topologies. Using molecular building block strategy, many ZMOFs with high stability and excellent performance can be rationally designed and synthesized using different secondary building units.

Revival of Zeolite-Templated Nanocarbon Materials: Recent Advances in Energy Storage and Conversion

Nanocarbon materials represent one of the hottest topics in physics, chemistry, and materials science. Preparation of nanocarbon materials by zeolite templates has been developing for more than 20 years. In recent years, novel structures and properties of zeolite-templated nanocarbons have been evolving and new applications are emerging in the realm of energy storage and conversion. Here, recent progress of zeolite-templated nanocarbons in advanced synthetic techniques, emerging properties, and novel applications is summarized: i) thanks to the diversity of zeolites, the structures of the corresponding nanocarbons are multitudinous; ii) by various synthetic techniques, novel properties of zeolite-templated nanocarbons can be achieved, such as hierarchical porosity, heteroatom doping, and nanoparticle loading capacity; iii) the applications of zeolite-templated nanocarbons are also evolving from traditional gas/vapor adsorption to advanced energy storage techniques including Li-ion batteries, Li-S batteries, fuel cells, metal-O2 batteries, etc. Finally, a perspective is provided to forecast the future development of zeolite-templated nanocarbon materials.