Reactions of Difunctional Electrophiles with Functionalized Aryllithium Compounds: Remarkable Chemoselectivity by Flash Chemistry

Fibrous catalyst based on atomic Pd and N-doped holey graphene functionalized cotton fiber for continuous-flow reaction

Continuous-flow catalysis bridges the gap between bench-scale laboratories and production-scale factories and thus should be a green and promising technology for the manufacture of value-added chemicals. Here, we present the construction of a continuous-flow catalytic system by integrating a tubular reactor with novel catalytic fibers, which are comprised of single-atomic Pd (Pd1) and nitrogen-doped holey graphene (NHG) functionalized cotton fibers (CFs). Due to the loosely packed structure, highly exposed dual-active sites (i.e., single-atomic PdN4 sites and activated C sites in the NHG carbocatalyst) of the CF@(Pd1/NHG) catalytic fibers, the corresponding flowing system exhibites remarkably high catalytic performance (activity and durability) and processing rate in organic reactions, including oxidative hydroxylation of phenylboronic acid and reduction of nitroarenes. Typically, the processing rate of the catalytic system toward 4-nitrophenol (a representative nitroarene) reduction can reach up to 2.46 × 10-3 mmol·mg-1·min-1, significantly higher than that of those packing catalysts reported in recent years.

Continuous‐Flow Divergent Lithiation of 2,3‐Dihalopyridines: Deprotolithiation versus Halogen Dance

We describe herein the first halogen dance (HD) in continuous flow on 2-chloro-3-bromopyridine by selectively trapping a (pyridin-4-yl)lithium species that is known to undergo the halogen-dance process. In addition, this lithiated intermediate was trapped at lower temperature before the HD occurs. The HD process was extended to fluoro-iodopyridines by using various electrophiles to afford 28 examples with yields ranging from 42 to 97 % with very short residence times. Finally, scale up of the reaction was demonstrated, affording a promising space-time yield (STY) of 4.2 kg.h^-1 .L^-1 .

Switchable Chemoselectivity of Reactive Intermediates Formation and Their Direct Use in A Flow Microreactor

A chemoselectivity switchable microflow reaction was developed to generate reactive and unstable intermediates. The switchable chemoselectivity of this reaction enables a selection for one of two different intermediates, an aryllithium or a benzyl lithium, at will from the same starting material. Starting from bromo-substituted styrenes, the aryllithium intermediates were converted to the substituted styrenes, whereas the benzyl lithium intermediates were engaged in an anionic polymerization. These chemoselectivity-switchable reactions can be integrated to produce polymers that cannot be formed during typical polymerization reactions.

Regioselective Magnesiations and Zincations of Aromatics and Heterocycles Triggered by Lewis Acids

Mixed TMP‐bases (TMP=2,2,6,6‐tetramethylpiperidyl), such as TMPMgCl ⋅ LiCl, TMP₂Mg ⋅ 2LiCl, TMPZnCl ⋅ LiCl and TMP₂Zn ⋅ 2LiCl, are outstanding reagents for the metalation of functionalized aromatics and heterocycles. In the presence of Lewis acids, such as BF₃ ⋅ OEt₂ or MgCl₂, the metalation scope of such bases was dramatically increased, and regioselectivity switches were achieved in the presence or absence of these Lewis acids. Furthermore, highly reactive lithium bases, such as TMPLi or Cy₂NLi, are also compatible with various Lewis acids, such as MgCl₂ ⋅ 2LiCl, ZnCl₂ ⋅ 2LiCl or CuCN ⋅ 2LiCl. Performing such metalations in continuous flow using commercial setups permitted practical and convenient reaction conditions.

Regioselective Synthesis of α-Functional Stilbenes via Precise Control of Rapid cis-trans Isomerization in Flow

The rapid cis-trans isomerization of α-anionic stilbene was regioselectively controlled by using flow microreactors, and its reaction with various electrophiles was conducted. The reaction time was precisely controlled within milliseconds to seconds at -50 °C to selectively give the cis- or trans-isomer in high yields. This synthetic method in flow was well-applied to synthesize precursors of commercial drug compound, (E)- and (Z)-tamoxifen with high regioselectivity and productivity.

Continuous flow as an enabling technology: a fast and versatile entry to functionalized glyoxal derivatives

We herein report two complementary strategies employing organolithium chemistry for the synthesis of glyoxal derivatives. Micro-mixer technology allows for the generation of unstable organometallic intermediates and their instantaneous in-line quenching with esters as electrophiles. Selective mono-addition was observed via putative stabilized tetrahedral intermediates. Advantages offered by flow chemistry technologies facilitate direct and efficient access to masked 1,2-dicarbonyl compounds while mitigating undesired by-product formation. These two approaches enable the production of advanced and valuable synthetic building blocks for heterocyclic chemistry with throughputs of grams per minute.

Flow Technology for the Genesis and Use of (Highly) Reactive Organometallic Reagents

In the field of organic synthesis, the advent of flow chemistry and flow microreactor technology represented a tremendous novelty in the way of thinking and performing chemical reactions, opening the doors to poorly explored or even impossible transformations using batch methods. In this Concept article, we would like to highlight the impact of flow chemistry for exploiting highly reactive organometallic reagents, and how, alongside the well-known advantages concerning safety, scalability, and productivity, flow chemistry makes possible processes that are impossible to control by using the traditional batch approach.

Generation and Reaction of Functional Alkyllithiums by Using Microreactors and Their Application to Heterotelechelic Polymer Synthesis

Flow microreactors enabled the successful generation of various functional alkyllithiums containing electrophilic functional groups, as well as the use of these alkyllithiums in subsequent reactions. The high reactivity of these series of reactions could be achieved by the extremely accurate and selective control of residence time. Moreover, integrated flow microreactor systems could be used to successfully synthesize heterotelechelic polymers with two functionalities, one at each end, via a process involving controlled anionic polymerization initiated by functional alkyllithium compounds, followed by trapping reactions with difunctional electrophiles.

Rapid and efficient synthesis of a novel cholinergic muscarinic M1 receptor positive allosteric modulator using flash chemistry

Continuous flow-flash synthesis of a 2-bromobenzaldehyde derivative 18 as a key intermediate of a novel cholinergic muscarinic M₁ positive allosteric modulator 1 bearing an isoindolin-1-one ring system as a pharmacophore has been achieved using flow microreactors through selective I/Li exchange of 1-bromo-2-iodobenzene derivative 17 with BuLi and subsequent formylation at -40 °C of the highly reactive 2-bromophenyllithium intermediate using DMF, which is difficult to achieve by a conventional batch process due to the conversion of the highly reactive 2-bromophenyllithium intermediate into benzyne even at -78 °C. Late-stage cyclization to give the isoindolin-1-one ring system, through reductive amination of 18 followed by palladium-catalyzed carbonylation with carbon monoxide and intramolecular cyclization, efficiently afforded 1 for its further research and development.

Synthesis of Functionalized Ketones from Acid Chlorides and Organolithiums by Extremely Fast Micromixing

Synthesis of ketones containing various functional groups from acid chlorides bearing electrophilic functional groups and functionalized organolithiums was achieved using a flow microreactor system. Extremely fast mixing is important for high chemoselectivity.

Suzuki–Miyaura Coupling Using Monolithic Pd Reactors and Scaling-Up by Series Connection of the Reactors

The space integration of the lithiation of aryl halides, the borylation of aryllithiums, and Suzuki–Miyaura coupling using a Pd catalyst supported by a polymer monolith flow reactor without using an intentionally added base was achieved. To scale up the process, a series connection of the monolith Pd reactor was examined. To suppress the increase in the pressure drop caused by the series connection, a monolith reactor having larger pore sizes was developed by varying the temperature of the monolith preparation. The monolithic Pd reactor having larger pore sizes enabled Suzuki–Miyaura coupling at a higher flow rate because of a lower pressure drop and, therefore, an increase in productivity. The present study indicates that series connection of the reactors with a higher flow rate serves as a good method for increasing the productivity without decreasing the yields.

Pathways to New Applications for Quantum Control

In 1998, the first successful quantum control experiment with application to a molecular framework was conducted with a shaped laser pulse, optimizing the branching ratio between different organometallic reaction channels. This work induced a vast activity in quantum control during the next 10 years, and different optimization aims were achieved in the gas phase, liquid phase, and even in biologically relevant molecules like light-harvesting complexes. Accompanying and preceding this development were important advances in theoretical quantum control simulations. They predicted several control scenarios and explained how and why quantum control experiments work. After many successful proofs of concept in molecular science, the big challenge is to expand its huge conceptual potential of directly being able to steer nuclear and/or electronic motion to more applied implementations. In this Account, based on several recent advances, we give a personal evaluation of where the field of molecular quantum control is at the moment and especially where we think promising applications can be in the near future. One of these paths leads to synthetic chemistry. The synthesis of novel pharmaceutical compounds or natural products often involves many synthetic steps, each one devouring resources and lowering the product yield. Shaped laser pulses can possibly act as photonic reagents and shorten the synthetic route toward the desired product. Chemical synthesis usually takes place in solution, and by including explicit solvent molecules in our quantum control simulations, we were able to identify their highly inhomogeneous influence on chemical reactions and how this affects potential quantum control. More important, we demonstrated for a synthetically relevant example that these complications can be overcome in theory, and laser pulses can be optimized to initiate the desired carbon-carbon bond formation. Putting this into context with the recently emerging concept of flow chemistry, which brings several practical advantages to the application of laser pulses, we want to encourage experimental groups to exploit this concept. Another path was opened by several additions to the commonly used laser pulse optimization algorithm (optimal control theory, OCT), several of which were developed in our group. The OCT algorithm as such is a purely mathematical optimization procedure, with no direct relation to experimental requirements. This means that usually the electric fields obtained out of OCT optimizations do not resemble laser pulses that can be achieved experimentally. However, the previously mentioned additions are aimed at closing the gap toward the experiment. In a recent quantum control study of our group, these algorithmic developments came to fruition. We were able to suggest a shaped laser pulse which can induce a long-living wave packet in the excited state of uracil. This might pave the way for novel experiments dedicated to investigating the formation of biological photodamage in DNA and RNA. The pulse we suggest is surprisingly simple because of the extended OCT algorithm and fulfills all criteria to be experimentally accessible.

Rapid and Mild Synthesis of Amino Acid N-Carboxy Anhydrides: Basic-to-Acidic Flash Switching in a Microflow Reactor

Polymerization of N-carboxy anhydrides (NCAs) is the primary process used to prepare polypeptides. The synthesis of various pure NCAs is key to the efficient synthesis of polypeptides. The only practical method that can be used to synthesize NCAs requires harsh acidic conditions that make acid-labile substrates unusable and results in an undesired ring opening of NCAs. Basic-to-acidic flash switching and subsequent flash dilution technology in a microflow reactor was used to demonstrate the synthesis of NCAs. It is both rapid (0.1 s) and mild (20 °C) and includes substrates containing acid-labile functional groups. The basic-to-acidic flash switching enabled both an acceleration of the desired NCA formation and avoided the undesired ring opening of NCAs. The flash dilution precluded the undesired decomposition of acid-labile functional groups. The developed process allowed the synthesis of various NCAs which cannot be readily synthesized using conventional batch methods.

Why microfluidics? Merits and trends in chemical synthesis

The intrinsic limitations of conventional batch synthesis have hindered its applications in both solving classical problems and exploiting new frontiers. Microfluidic technology offers a new platform for chemical synthesis toward either molecules or materials, which has promoted the progress of diverse fields such as organic chemistry, materials science, and biomedicine. In this review, we focus on the improved performance of microreactors in handling various situations, and outline the trend of microfluidic synthesis (microsynthesis, μSyn) from simple microreactors to integrated microsystems. Examples of synthesizing both chemical compounds and micro/nanomaterials show the flexible applications of this approach. We aim to provide strategic guidance for the rational design, fabrication, and integration of microdevices for synthetic use. We critically evaluate the existing challenges and future opportunities associated with this burgeoning field.

The Hitchhiker's Guide to Flow Chemistry ∥

Flow chemistry involves the use of channels or tubing to conduct a reaction in a continuous stream rather than in a flask. Flow equipment provides chemists with unique control over reaction parameters enhancing reactivity or in some cases enabling new reactions. This relatively young technology has received a remarkable amount of attention in the past decade with many reports on what can be done in flow. Until recently, however, the question, "Should we do this in flow?" has merely been an afterthought. This review introduces readers to the basic principles and fundamentals of flow chemistry and critically discusses recent flow chemistry accounts.

Micromixing enables chemoselective reactions of difunctional electrophiles with functional aryllithiums

Generation of highly unstable functional aryllithiums followed by chemoselective reactions with difunctional electrophiles were successfully achieved using flow microreactor systems equipped with micromixers to give highly functionalized compounds without protecting functional groups.

On-chip integration of organic synthesis and HPLC/MS analysis for monitoring stereoselective transformations at the micro-scale

We present a microfluidic system, seamlessly integrating microflow and microbatch synthesis with a HPLC/nano-ESI-MS functionality on a single glass chip. The microfluidic approach allows to efficiently steer and dispense sample streams down to the nanoliter-range for studying reactions in quasi real-time. In a proof-of-concept study, the system was applied to explore amino-catalyzed reactions, including asymmetric iminium-catalyzed Friedel-Crafts alkylations in microflow and micro confined reaction vessels.

Nonclassical Routes for Amide Bond Formation

The present review offers an overview of nonclassical (e.g., with no pre- or in situ activation of a carboxylic acid partner) approaches for the construction of amide bonds. The review aims to comprehensively discuss relevant work, which was mainly done in the field in the last 20 years. Organization of the data follows a subdivision according to substrate classes: catalytic direct formation of amides from carboxylic and amines ( section 2 ); the use of carboxylic acid surrogates ( section 3 ); and the use of amine surrogates ( section 4 ). The ligation strategies (NCL, Staudinger, KAHA, KATs, etc.) that could involve both carboxylic acid and amine surrogates are treated separately in section 5 .

Continuous-Flow Synthesis of Biaryls by Negishi Cross-Coupling of Fluoro- and Trifluoromethyl-Substituted (Hetero)arenes

A continuous-flow method for the regioselective arylation of fluoroarenes and fluoropyridines has been developed. The telescoped procedure reported here consists of a three-step metalation, zincation, and Negishi cross-coupling sequence, providing efficient access to a variety of functionalized 2-fluorobiaryl products. Precise temperature control of the metalation step, made possible by continuous-flow technology, allowed for the efficient preparation of the arylated products in high yields and short residence times. Additionally, several examples of the regioselective arylation of benzotrifluoride derivatives are also provided.