Chemical scissor-mediated structural editing of layered transition metal carbides

Intercalated layered materials offer distinctive properties and serve as precursors for important two-dimensional (2D) materials. However, intercalation of non-van der Waals structures, which can expand the family of 2D materials, is difficult. We report a structural editing protocol for layered carbides (MAX phases) and their 2D derivatives (MXenes). Gap-opening and species-intercalating stages were respectively mediated by chemical scissors and intercalants, which created a large family of MAX phases with unconventional elements and structures, as well as MXenes with versatile terminals. The removal of terminals in MXenes with metal scissors and then the stitching of 2D carbide nanosheets with atom intercalation leads to the reconstruction of MAX phases and a family of metal-intercalated 2D carbides, both of which may drive advances in fields ranging from energy to printed electronics.

Bandgap Tunable Oxynitride LaNb2 O7-x Nx Nanosheets

Bandgap tunable lanthanum niobium oxynitride [LaNb₂ O_7-x N_x ]^(1+x)- nanosheet is prepared by the delamination of a Ruddlesden-Popper phase perovskite oxynitride via ion-exchange and two-step intercalation processes. The lanthanum niobium oxynitride nanosheets have a homogeneous thickness of 1.6 nm and exhibit a variety of chromatic colors depending on the nitridation temperature of the parent-layered oxynitride. The bandgap energy of the nanosheets is determined by ultraviolet photoemission spectroscopy, Mott-Schottky, and photoelectrochemical measurements and is found to be tunable in the range of 2.03-2.63 eV. Furthermore, the oxide/oxynitride superlattice structures are fabricated by face-to-face stacking of 2D crystals using oxynitride [LaNb₂ O_7-x N_x ]^(1+x)- and oxide [Ca₂ Nb₃ O₁₀ ]^- nanosheets as building blocks. Moreover, the superlattices-like restacked oxynitride/oxide nanosheets hybrid exhibits unique proton conductivity and dielectric properties strongly influenced by the oxynitride nanosheets and enhanced photocatalytic activity under visible light irradiation.

Platinum@Hexaniobate Nanopeapods: A Directed Photocatalytic Architecture for Dye-Sensitized Semiconductor H2 Production under Visible Light Irradiation

Platinum@hexaniobate nanopeapods (Pt@HNB NPPs) are a nanocomposite photocatalyst that was selectively engineered to increase the efficiency of hydrogen production from visible light photolysis. Pt@HNB NPPs consist of linear arrays of high surface area Pt nanocubes encapsulated within scrolled sheets of the semiconductor H _x K_4-x Nb₆O₁₇ and were synthesized in high yield via a facile one-pot microwave heating method that is fast, reproducible, and more easily scalable than multi-step approaches required by many other state-of-the-art catalysts. The Pt@HNB NPPs' unique 3D architecture enables physical separation of the Pt catalysts from competing surface reactions, promoting electron efficient delivery to the isolated reduction environment along directed charge transport pathways that kinetically prohibit recombination reactions. Pt@HNB NPPs' catalytic activity was assessed in direct comparison to representative state-of-the-art Pt/semiconductor nanocomposites (extPt-HNB NScs) and unsupported Pt nanocubes. Photolysis under similar conditions exhibited superior H₂ production by the Pt@HNB NPPs, which exceeded other catalyst H₂ yields (μmol) by a factor of 10. Turnover number and apparent quantum yield values showed similar dramatic increases over the other catalysts. Overall, the results clearly demonstrate that Pt@HNB NPPs represent a unique, intricate nanoarchitecture among state-of-the-art heterogeneous catalysts, offering obvious benefits as a new architectural pathway toward efficient, versatile, and scalable hydrogen energy production. Potential factors behind the Pt@HNB NPPs' superior performance are discussed below, as are the impacts of systematic variation of photolysis parameters and the use of a non-aqueous reductive quenching photosystem.

Complexed Semiconductor Cores Activate Hexaniobate Ligands as Nucleophilic Sites for Solar‐Light Reduction of CO 2 by Water

Although pure and functionalized solid-state polyniobates such as layered perovskites and niobate nanosheets are photocatalysts for renewable-energy processes, analogous reactions by molecular polyoxoniobate cluster-anions are nearly absent from the literature. We now report that under simulated solar light, hexaniobate cluster-anion encapsulated 30-Ni^II -ion "fragments" of surface-protonated cubic-phase-like NiO cores activate the hexaniobate ligands towards CO₂ reduction by water. Photoexcitation of the NiO cores promotes charge-transfer reduction of Nb^V to Nb^IV , increasing electron density at bridging oxo atoms of Nb-μ-O-Nb linkages that bind and convert CO₂ to CO. Photogenerated NiO "holes" simultaneously oxidize water to dioxygen. The findings point to molecular complexation of suitable semiconductor "fragments" as a general method for utilizing electron-dense polyoxoniobate anions as nucleophilic photocatalysts for solar-light driven activation and reduction of small molecules.

Highly active Cs2SnCl6/C3N4 heterojunction photocatalysts operating via interfacial charge transfer mechanism

In this study, a novel lead-free perovskite heterojunction Cs₂SnCl₆/C₃N₄ composite was constructed and applied for photocatalytic NO purification. After design optimization, the Cs₂SnCl₆/C₃N₄ heterojunction exhibit excellent and stable photocatalytic NO purification ability under visible-light irradiation, which is significantly better than pristine Cs₂SnCl₆ and C₃N₄. Combined in-situ DRIFTS and electron spin resonance spin-trapping, the mechanism of Cs₂SnCl₆/C₃N₄ photocatalytic NO removal was revealed. Under visible-light irradiation, the photo-generated electrons on the conduction band of C₃N₄ would spontaneously migrate to the CB of Cs₂SnCl₆, leaving holes (h⁺) on the valence band of C₃N₄, contributing to efficiently segregated charge carriers and improved photocatalytic NO purification. Density functional theory calculations also revealed the directional electron transfer at the C₃N₄ and Cs₂SnCl₆ interface, in which the charge was migrated from C₃N₄ to Cs₂SnCl₆ induced by the internal electric field. This research sheds fresh light on the fabrication of Cs₂SnCl₆/C₃N₄ heterojunctions as well as its effective interfacial charge separation.

Surface-modified, dye-sensitized niobate nanosheets enabling an efficient solar-driven Z-scheme for overall water splitting

While dye-sensitized metal oxides are good candidates as H₂ evolution photocatalysts for solar-driven Z-scheme water splitting, their solar-to-hydrogen (STH) energy conversion efficiencies remain low because of uncontrolled charge recombination reactions. Here, we show that modification of Ru dye-sensitized, Pt-intercalated HCa₂Nb₃O₁₀ nanosheets (Ru/Pt/HCa₂Nb₃O₁₀) with both amorphous Al₂O₃ and poly(styrenesulfonate) (PSS) improves the STH efficiency of Z-scheme overall water splitting by a factor of ~100, when the nanosheets are used in combination with a WO₃-based O₂ evolution photocatalyst and an I₃^-/I^- redox mediator, relative to an analogous system that uses unmodified Ru/Pt/HCa₂Nb₃O₁₀. By using the optimized photocatalyst, PSS/Ru/Al₂O₃/Pt/HCa₂Nb₃O₁₀, a maximum STH of 0.12% and an apparent quantum yield of 4.1% at 420 nm were obtained, by far the highest among dye-sensitized water splitting systems and comparable to conventional semiconductor-based suspended particulate photocatalyst systems.

Manipulation of charge carrier flow in Bi4NbO8Cl nanoplate photocatalyst with metal loading

Separation of photoexcited charge carriers in semiconductors is important for efficient solar energy conversion and yet the control strategies and underlying mechanisms are not fully established. Although layered compounds have been widely studied as photocatalysts, spatial separation between oxidation and reduction reaction sites is a challenging issue due to the parallel flow of photoexcited carriers along the layers. Here we demonstrate orthogonal carrier flow in layered Bi4NbO8Cl by depositing a Rh cocatalyst at the edges of nanoplates, resulting in spatial charge separation and significant enhancement of the photocatalytic activity. Combined experimental and theoretical studies revealed that lighter photogenerated electrons, due to a greater in-plane dispersion of the conduction band (vs. valence band), can travel along the plane and are readily trapped by the cocatalyst, whereas the remaining holes hop perpendicular to the plane because of the anisotropic crystal geometry. Our results propose manipulating carrier flow via cocatalyst deposition to achieve desirable carrier dynamics for photocatalytic reactions in layered compounds.

Development and Functionalization of Visible-Light-Driven Water-Splitting Photocatalysts

With global warming and the depletion of fossil resources, our fossil fuel-dependent society is expected to shift to one that instead uses hydrogen (H2) as a clean and renewable energy. To realize this, the photocatalytic water-splitting reaction, which produces H2 from water and solar energy through photocatalysis, has attracted much attention. However, for practical use, the functionality of water-splitting photocatalysts must be further improved to efficiently absorb visible (Vis) light, which accounts for the majority of sunlight. Considering the mechanism of water-splitting photocatalysis, researchers in the various fields must be employed in this type of study to achieve this. However, for researchers in fields other than catalytic chemistry, ceramic (semiconductor) materials chemistry, and electrochemistry to participate in this field, new reviews that summarize previous reports on water-splitting photocatalysis seem to be needed. Therefore, in this review, we summarize recent studies on the development and functionalization of Vis-light-driven water-splitting photocatalysts. Through this summary, we aim to share current technology and future challenges with readers in the various fields and help expedite the practical application of Vis-light-driven water-splitting photocatalysts.

Tuning the Photocatalytic Activity of Layered Perovskite Niobates by Controlled Ion Exchange and Hydration

Dion-Jacobson type layered perovskite niobium oxides KCa2Nb3O10 and KSr2Nb3O10 were prepared via molten salt method, and the potassium cations were exchanged by protons using nitric acid. Different degrees of proton...

Developing sustainable, high-performance perovskites in photocatalysis: design strategies and applications

Solar energy is attractive because it is free, renewable, abundant and sustainable. Photocatalysis is one of the feasible routes to utilize solar energy for the degradation of pollutants and the production of fuel. Perovskites and their derivatives have received substantial attention in both photocatalytic wastewater treatment and energy production because of their highly tailorable structural and physicochemical properties. This review illustrates the basic principles of photocatalytic reactions and the application of these principles to the design of robust and sustainable perovskite photocatalysts. It details the structures of the perovskites and the physics and chemistry behind photocatalytic reactions and describes the advantages and limitations of popular strategies for the design of photoactive perovskites. This is followed by examples of how these strategies are applied to enhance the photocatalytic efficiency of oxide, halide and oxyhalide perovskites, with a focus on materials with potential for practical application, that is, not containing scarce or toxic elements. It is expected that this overview of the development of photocatalysts and deeper understanding of photocatalytic principles will accelerate the exploitation of efficient perovskite photocatalysts and bring about effective solutions to the energy and environmental crisis.

Engineered two-dimensional nanomaterials: an emerging paradigm for water purification and monitoring

Water scarcity has become an increasingly complex challenge with the growth of the global population, economic expansion, and climate change, highlighting the demand for advanced water treatment technologies that can provide clean water in a scalable, reliable, affordable, and sustainable manner. Recent advancements on 2D nanomaterials (2DM) open a new pathway for addressing the grand challenge of water treatment owing to their unique structures and superior properties. Emerging 2D nanostructures such as graphene, MoS₂, MXene, h-BN, g-C₃N₄, and black phosphorus have demonstrated an unprecedented surface-to-volume ratio, which promises ultralow material use, ultrafast processing time, and ultrahigh treatment efficiency for water cleaning/monitoring. In this review, we provide a state-of-the-art account on engineered 2D nanomaterials and their applications in emerging water technologies, involving separation, adsorption, photocatalysis, and pollutant detection. The fundamental design strategies of 2DM are discussed with emphasis on their physicochemical properties, underlying mechanism and targeted applications in different scenarios. This review concludes with a perspective on the pressing challenges and emerging opportunities in 2DM-enabled wastewater treatment and water-quality monitoring. This review can help to elaborate the structure-processing-property relationship of 2DM, and aims to guide the design of next-generation 2DM systems for the development of selective, multifunctional, programmable, and even intelligent water technologies. The global significance of clean water for future generations sheds new light and much inspiration in this rising field to enhance the efficiency and affordability of water treatment and secure a global water supply in a growing portion of the world.

Silver Adsorption on Calcium Niobate(001) Nanosheets: Calorimetric Energies That Explain Sinter-Resistant Support

Metal nanoparticles deposited on oxide supports are essential to many technologies, including catalysts, fuel cells, and electronics. Therefore, understanding the chemical bonding strength between metal nanoparticles and oxide surfaces is of great interest. The adsorption energetics, adhesion energy, and adsorbate structure of Ag on dehydrated HCa₂Nb₃O₁₀(001) nanosheets at 300 K have been studied using metal adsorption calorimetry and surface spectroscopies. These dehydrated ("dh") calcium niobate nanosheets (dh-HCa₂Nb₃O₁₀(001)) have the stoichiometry Ca₄Nb₆O₁₉. They impart unusual stability to metal nanoparticles when used as catalyst supports and are easy-to-prepare by Langmuir-Blodgett (LB) techniques, highly ordered, and essentially single-crystal surfaces of mixed oxides with a huge ratio of terrace to edge sites. Below the monolayer coverage, Ag grows on dh-HCa₂Nb₃O₁₀(001) as 2D islands of thickness ∼2 layers. The differential heat of Ag adsorption is initially ∼303 kJ/mol, increasing slowly to ∼338 kJ/mol by 0.8 ML. At higher coverages, Ag atoms mainly add on top of these 2D islands, growing 3D nanoparticles of increasing thickness, as the heat decreases asymptotically toward silver's heat of sublimation (285 kJ/mol). The adhesion energy of Ag(s) to this Ca niobate surface is estimated to be 4.33 J/m², larger than that on any oxide surface previously measured. This explains the sinter resistance reported for metal nanoparticles on this support. Electron transfer from Ag into the calcium niobate is also measured. These results demonstrate an easy way to do single-crystal-type surface science studies-and especially thermochemical measurements-on the complex surfaces of mixed oxides: using LB-deposited perovskite nanosheets and ultrahigh-vacuum annealing in O₂.

Noble-metal-free Co x P nanoparticles: modified perovskite oxide ultrathin nanosheet photocatalysts with significantly enhanced photocatalytic hydrogen evolution activity

The integration of semiconductor-based photocatalysts with noble-metal-free cocatalysts has great significance for practical applications. In this work, for the first time, novel Co _x P/K⁺Ca₂Nb₃O₁₀ ^- nanostructures (abbreviated as Co _x P/KCNO_us) were synthesized by integrating noble-metal-free Co _x P nanoparticles onto the surface of K⁺Ca₂Nb₃O₁₀ ^- ultrathin nanosheets (abbreviated as KCNO_us), and exhibited enhanced photocatalytic hydrogen generation. Under the irradiation of xenon light, the hydrogen generation rate of the resulting optimal Co _x P/KCNO_us reached up to 90.4 μmol g^-1 h^-1, approximately 5.78 times higher than that of single-component KCNO_us. The apparent quantum efficiency (AQE) of Co _x P/KCNO_us is 1.32% at 350 nm. Based on photoluminescence (PL), UV-vis diffuse reflectance spectroscopy (UV-vis DRS), and photo-electrochemical analyses, possible reasons for this improved photocatalytic activity can be ascribed to the enhanced light absorption capacity and strong separation efficiency of photoinduced carriers over Co _x P/KCNO_us owing to the formation of the interfaces between KCNO_us and Co _x P nanoparticles. It is believed that this work will provide a new insight into the development ofefficient and low-cost noble-metal-free cocatalysts for photocatalytic hydrogen evolution reactions.

Semiconductor nanocrystals for small molecule activation via artificial photosynthesis

The protocol of artificial photosynthesis using semiconductor nanocrystals shines light on green, facile and low-cost small molecule activation to produce solar fuels and value-added chemicals.

Influence of the preparation conditions on the morphology and photocatalytic performance Pt-modified hexaniobate composites

The preparation of lamellar nanostructures through exfoliation of stacked niobates is an interesting approach to the development of photocatalysts for energy conversion and environmental remediation. These materials exhibit a rich surface chemistry and several nanocomposites can be produced through intercalation or impregnation of suitable precursors. In this work, the influence of the physico-chemical preparation conditions on the photocatalytic activity of Pt-hexaniobate nanocomposites was investigated aiming at the establishment of the main factors that control their photoreactivities. Modification of hexaniobate layers were carried out by adsorption and impregnation methods, using [Pt(NH₃)₄]Cl₂ (Pt1) and H₂PtCl₆ (Pt2), respectively. The addition of platinum precursors (1% wt.) were performed in the presence of the exfoliating agent tert-butylammonium hydroxide, sNb, or after acidic precipitation followed by resuspension in plain water, eNb. All samples were submitted to photoirradiation to reduce the platinum precursors and the effect of a previous thermal treatment was also evaluated. It was observed that H₂ evolution from aqueous methanol solutions is more favored on hexaniobate nanosheets (eNb-Pt1 and eNb-Pt2) instead of scrolled layers (sNb-Pt1 and sNb-Pt2), independent on the platinum precursor. Moreover, residual tert-butylammonium can act as hole scavenger and decrease the degradation rates for methanol oxidation in sNb samples. The curled layers observed for sNb samples seem to favor the photodegradation of cationic species, such as methylene blue. Thermal treatment at 500 °C leads to morphological changes with a decrease of the specific surface area due to restacking of the individual layers along with some curling. As a result, the H₂ evolution rates strongly decreases in relation to the non-sintered samples, suggesting that the 'soft' photoreduction of platinum precursors is the best method for preparation of these photocatalysts. The correlations between the preparation conditions and the photocatalytic activity for different photoreactions can allow the development of optimized materials for specific applications.

Particulate Photocatalysts for Light-Driven Water Splitting: Mechanisms, Challenges, and Design Strategies

Solar-driven water splitting provides a leading approach to store the abundant yet intermittent solar energy and produce hydrogen as a clean and sustainable energy carrier. A straightforward route to light-driven water splitting is to apply self-supported particulate photocatalysts, which is expected to allow solar hydrogen to be competitive with fossil-fuel-derived hydrogen on a levelized cost basis. More importantly, the powder-based systems can lend themselves to making functional panels on a large scale while retaining the intrinsic activity of the photocatalyst. However, all attempts to generate hydrogen via powder-based solar water-splitting systems to date have unfortunately fallen short of the efficiency values required for practical applications. Photocatalysis on photocatalyst particles involves three sequential steps: (i) absorption of photons with higher energies than the bandgap of the photocatalysts, leading to the excitation of electron-hole pairs in the particles, (ii) charge separation and migration of these photoexcited carriers, and (iii) surface chemical reactions based on these carriers. In this review, we focus on the challenges of each step and summarize material design strategies to overcome the obstacles and limitations. This review illustrates that it is possible to employ the fundamental principles underlying photosynthesis and the tools of chemical and materials science to design and prepare photocatalysts for overall water splitting.

Metal Nanoclusters: New Paradigm in Catalysis for Water Splitting, Solar and Chemical Energy Conversion

A sustainable future demands innovative breakthroughs in science and technology today, especially in the energy sector. Earth-abundant resources can be explored and used to develop renewable and sustainable resources of energy to meet the ever-increasing global energy demand. Efficient solar-powered conversion systems exploiting inexpensive and robust catalytic materials for the photo- and photo-electro-catalytic water splitting, photovoltaic cells, fuel cells, and usage of waste products (such as CO₂ ) as chemical fuels are appealing solutions. Many electrocatalysts and nanomaterials have been extensively studied in this regard. Low overpotentials, catalytic stability, and accessibility remain major challenges. Metal nanoclusters (NCs, ≤3 nm) with dimensions between molecule and nanoparticles (NPs) are innovative materials in catalysis. They behave like a "superatom" with exciting size- and facet-dependent properties and dynamic intrinsic characteristics. Being an emerging field in recent scientific endeavors, metal NCs are believed to replace the natural photosystem II for the generation of green electrons in a viable way to facilitate the challenging catalytic processes in energy-conversion schemes. This Review aims to discuss metal NCs in terms of their unique physicochemical properties, possible synthetic approaches by wet chemistry, and various applications (mostly recent advances in the electrochemical and photo-electrochemical water splitting cycle and the oxygen reduction reaction in fuel cells). Moreover, the significant role that MNCs play in dye-sensitized solar cells and nanoarrays as a light-harvesting antenna, the electrochemical reduction of CO₂ into fuels, and concluding remarks about the present and future perspectives of MNCs in the frontiers of surface science are also critically reviewed.

Photocatalytic overall water splitting on Pt nanocluster-intercalated, restacked KCa2Nb3O10 nanosheets: the promotional effect of co-existing ions

Promotional effects of co-existing ions on overall water splitting into H₂ and O₂ have been studied in bulk-type semiconductor photocatalysts (e.g., TiO₂), but such an effect remains unexplored in two-dimensional nanosheet photocatalysts. Here we examined the effect of co-existing ions on the photocatalytic water splitting activity of Pt nanocluster-intercalated KCa₂Nb₃O₁₀ nanosheets. Interestingly, not only anions, as usually observed in bulk-type photocatalysts, but also cations had a significant influence on the photocatalytic performance. The rates of H₂ and O₂ evolution over Pt/KCa₂Nb₃O₁₀ as well as the product stoichiometry were improved in the presence of NaI. I^- ions were found to effectively suppress undesirable backward reactions, consistent with the previous work by Abe et al. (Chem. Phys. Lett., 2003, 371, 360-364). On the other hand, Na⁺ ions in the reaction solution were exchanged for K⁺ in the interlayer space of KCa₂Nb₃O₁₀ during the water splitting reaction, which promoted interlayer hydration and consequently improved photocatalytic performance.

Preparation of monolayer HSr2Nb3O10 nanosheets for photocatalytic hydrogen evolution

Monolayer HSr₂Nb₃O₁₀ nanosheets modified with highly dispersed Pt clusters were prepared via in situ growth to promote an excellent photocatalytic hydrogen evolution activity.

Construction of Highly Hierarchical Layered Structure Consisting of Titanate Nanosheets, Tungstate Nanosheets, Ru(bpy)32+, and Pt(terpy) for Vectorial Photoinduced Z-Scheme Electron Transfer

To imitate the precisely ordered structure of the photoantennas and electron mediators in the natural photosynthesis system, we have constructed the Ru(bpy)₃²⁺-intercalated alternate-layered structure of titanate nanosheets and tungstate nanosheets via thiol-ene click reaction. Before nanosheet stacking, Pt(terpy) was immobilized at the edge of the titanate nanosheets. The visible-light-induced vectorial Z-scheme electron transfer reaction from the valence band of tungstate to the conduction band of titanate via the photoexcited Ru(bpy)₃²⁺ was demonstrated by the following two evidences: (1) From the results of the fluorescence decay of Ru(bpy)₃²⁺, the rate of the forward electron transfer from the photoexcited Ru(bpy)₃²⁺ to the conduction band of titanate was estimated as 1.16 × 10⁸ s^-1, which was 10 times faster than the backward electron transfer from the photoexcited Ru(bpy)₃ to the conduction band of tungstate (1.02 × 10⁷ s^-1) due to a localization of Ru(bpy)₃²⁺ on the titanate nanosheets. (2) We observed the decrease of the electrons accumulated in the conduction band of the tungstate induced by photoexcitation of Ru(bpy)₃²⁺, demonstrating the forward electron transfer from the conduction band of tugnstate to the vacant highest occupied molecular orbital level of the photoexcitation Ru(bpy)₃²⁺. Finally, H₂ gas was produced from the water dispersion of the alternate-layered structure under visible light irradiation, suggesting that the electrons getting to the conduction band of the titanate were transferred to the Pt(terpy) placed at the edge of the nanosheets, and reduced water to dihydrogen. Herein, n-octylamine species at the interlayer space played a role as hole scavenger; in other words, these molecules were oxidized by the hole in the conduction band of the tungstate nanosheets.

Materials Nanoarchitectonics Using 2D Layered Materials: Recent Developments in the Intercalation Process

Layered inorganic solids as an attractive classification of 2D materials offer material diversity and a wide range of interesting properties. Layered inorganic solids provide an expandable 2D nanospace between each individual layer, the so called interlayer space, to accommodate/arrange guest species such as molecules, nanoparticles, and polymer chains and design unique nanoarchitectures, resulting in the production of intercalation compounds showing different properties in comparison to those of virgin layered materials and guest species. Layered inorganic solids can also be exfoliated to result in nanosheet production. Further ordering of exfoliated nanosheets is also possible via different methods and normally leads to creating soft materials presenting properties and applications different from that of relatively rigid intercalation compounds. Here, the latest studies and up-to-date developments on the possible techniques of designing novel types of materials using layered inorganic solids are specifically highlighted.

Metal-complex chromophores for solar hydrogen generation

Solar H₂ generation from water has been intensively investigated as a clean method to convert solar energy into hydrogen fuel. During the past few decades, many studies have demonstrated that metal complexes can act as efficient photoactive materials for photocatalytic H₂ production. Here, we review the recent progress in the application of metal-complex chromophores to solar-to-H₂ conversion, including metal-complex photosensitizers and supramolecular photocatalysts. A brief overview of the fundamental principles of photocatalytic H₂ production is given. Then, different metal-complex photosensitizers and supramolecular photocatalysts are introduced in detail, and the most important factors that strictly determine their photocatalytic performance are also discussed. Finally, we illustrate some challenges and opportunities for future research in this promising area.

Host-Guest Interaction Creates Hydrogen-Evolution Electrocatalytic Active Sites in 3d Transition Metal-Intercalated Titanates

The hydrogen evolution reaction (HER) is involved in energy-intensive water- and chlor-alkali electrolyzers, and thus, highly active and stable HER electrocatalysts in alkaline media are needed. Titanates, a family of representative two-dimensional materials with negatively charged main layers, are chemically and structurally stable under strongly basic conditions, but they have never been shown to have electrocatalytic activity for HER. Herein, we report that intercalating 3d metal cations, including Fe³⁺, Co²⁺, Ni²⁺, and Cu²⁺ ions, into the interlayer regions of titanates yields efficient and robust electrocatalysts for the alkaline HER. The intercalation of 3d metal cations in titanates is achieved by rapid cation-exchange reaction between Na⁺-containing titanates and 3d metal cations at room temperature. Among the 3d metal-intercalated titanates we synthesize, the Co²⁺-containing material is found to show the best electrocatalytic activity. Experimental and theoretical results reveal that the strong electronic interaction between 3d metal cations and negatively charged main [TiO₆]_∞ layers renders good catalytic activity to the outermost oxygen atoms in the [TiO₆]_∞ layer, further making 3d metal-intercalated titanate an efficient electrocatalyst for the HER.

Dion–Jacobson-type perovskite KCa2Ta3O10 nanosheets hybridized with g-C3N4 nanosheets for photocatalytic H2 production

Dion–Jacobson-type perovskite oxide KCa₂Ta₃O₁₀ has been identified as a promising semiconductor for construction of hybrid catalyst for photocatalytic H₂ evolution.

Unique physicochemical properties of two-dimensional light absorbers facilitating photocatalysis

The emergence of two-dimensional (2D) materials with a large lateral size and extremely small thickness has significantly changed the development of many research areas by producing a variety of unusual physicochemical properties.

Combining photocatalytic hydrogen generation and capsule storage in graphene based sandwich structures

The challenge of safe hydrogen storage has limited the practical application of solar-driven photocatalytic water splitting. It is hard to isolate hydrogen from oxygen products during water splitting to avoid unwanted reverse reaction or explosion. Here we propose a multi-layer structure where a carbon nitride is sandwiched between two graphene sheets modified by different functional groups. First-principles simulations demonstrate that such a system can harvest light and deliver photo-generated holes to the outer graphene-based sheets for water splitting and proton generation. Driven by electrostatic attraction, protons penetrate through graphene to react with electrons on the inner carbon nitride to generate hydrogen molecule. The produced hydrogen is completely isolated and stored with a high-density level within the sandwich, as no molecules could migrate through graphene. The ability of integrating photocatalytic hydrogen generation and safe capsule storage has made the sandwich system an exciting candidate for realistic solar and hydrogen energy utilization.

Developing an efficient NiCo2S4 cocatalyst for improving the visible light H2 evolution performance of CdS nanoparticles

NiCo₂S₄ is developed as a noble-metal-free, efficient and stable cocatalyst for improving the visible light H₂ evolution performance of CdS nanoparticles.

A hybrid of CdS/HCa2Nb3O10 ultrathin nanosheets for promoting photocatalytic hydrogen evolution

A hybrid of CdS/HCa₂Nb₃O₁₀ ultrathin nanosheets with a tough heterointerface was successfully fabricated. Efficient interfacial charge transfer from CdS to HCa₂Nb₃O₁₀ nanosheets was achieved to realize the enhanced photocatalytic H₂ evolution activity.

Synthesis and photocatalytic activity of K2CaNaNb3O10, a new Ruddlesden–Popper phase layered perovskite

The photocatalytic performance of a new layered perovskite K₂CaNaNb₃O₁₀ of the Ruddlesden–Popper phase was compared to Dion–Jacobson type KCa₂Nb₃O₁₀.

Atomically monodisperse nickel nanoclusters as highly active electrocatalysts for water oxidation

Achieving water splitting at low overpotential with high oxygen evolution efficiency and stability is important for realizing solar to chemical energy conversion devices. Herein we report the synthesis, characterization and electrochemical evaluation of highly active nickel nanoclusters (Ni NCs) for water oxidation at low overpotential. These atomically precise and monodisperse Ni NCs are characterized by using UV-visible absorption spectroscopy, single crystal X-ray diffraction and mass spectrometry. The molecular formulae of these Ni NCs are found to be Ni4(PET)8 and Ni6(PET)12 and are highly active electrocatalysts for oxygen evolution without any pre-conditioning. Ni4(PET)8 are slightly better catalysts than Ni6(PET)12 which initiate oxygen evolution at an amazingly low overpotential of ∼1.51 V (vs. RHE; η≈ 280 mV). The peak oxygen evolution current density (J) of ∼150 mA cm(-2) at 2.0 V (vs. RHE) with a Tafel slope of 38 mV dec(-1) is observed using Ni4(PET)8. These results are comparable to the state-of-the-art RuO2 electrocatalyst, which is highly expensive and rare compared to Ni-based materials. Sustained oxygen generation for several hours with an applied current density of 20 mA cm(-2) demonstrates the long-term stability and activity of these Ni NCs towards electrocatalytic water oxidation. This unique approach provides a facile method to prepare cost-effective, nanoscale and highly efficient electrocatalysts for water oxidation.

Flat-Band Potentials of Molecularly Thin Metal Oxide Nanosheets

Exfoliated nanosheets derived from Dion-Jacobson phase layer perovskites (TBAxH1-xA2B3O10, A = Sr, Ca, B = Nb, Ta) were grown layer-by-layer on fluorine-doped tin oxide and gold electrode surfaces. Electrochemical impedance spectra (EIS) of the five-layer nanosheet films in contact with aqueous electrolyte solutions were analyzed by the Mott-Schottky method to obtain flat-band potentials (VFB) of the oxide semiconductors as a function of pH. Despite capacitive contributions from the electrode-solution interface, reliable values could be obtained from capacitance measurements over a limited potential range near VFB. The measured values of VFB shifted -59 mV/pH over the pH range of 4-8 and were in close agreement with the empirical correlation between conduction band-edge potentials and optical band gaps proposed by Matsumoto ( J. Solid State Chem. 1996, 126 (2), 227-234 ). Density functional theory calculations showed that A-site substitution influenced band energies by modulating the strength of A-O bonding, and that subsitution of Ta for Nb on B-sites resulted in a negative shift of the conduction band-edge potential.

Prolonged Electron Lifetime in Ordered TiO2 Mesophyll Cell-Like Microspheres for Efficient Photocatalytic Water Reduction and Oxidation

Mesoporous integrated TiO2 spheres composed of numerous orderly arranged nanocrystals with a reduced lattice-lattice interface connection, display an almost four times longer electron lifetime (350 ps) than the randomly aggregated nanoparticles (80 ps), and hence enhance the corresponding photocatalytic H2 and O2 generation.

Recent advances in 2D materials for photocatalysis

Two-dimensional (2D) materials have attracted increasing attention for photocatalytic applications because of their unique thickness dependent physical and chemical properties. This review gives a brief overview of the recent developments concerning the chemical synthesis and structural design of 2D materials at the nanoscale and their applications in photocatalytic areas. In particular, recent progress on the emerging strategies for tailoring 2D material-based photocatalysts to improve their photo-activity including elemental doping, heterostructure design and functional architecture assembly is discussed.