Transfer Hydrosilylation

Electrophilic Hydrosilylation of Electron-Rich Alkenes Derived from Enamines

The low-electron count, air-stable, platinum complexes [Pt(ItBu')(ItBu)][BArF] (C1) (ItBu=1,3-di-tert-butylimidazol-2-ylidene), [Pt(SiPh)3(ItBuiPr)2][BArF] (C2) (ItBuiPr=1-tert-butyl-3-iso-propylimidazol-2-ylidene), [Pt(SiPh)3(ItBuMe)2][BArF] (C3), [Pt(GePh3)(ItBuiPr)2][BArF] (C4), [Pt(GePh)3(ItBuMe)2][BArF] (C5) and [Pt(GeEt)3(ItBuMe)2][BArF] (C6) (ItBuMe=1-tert-butyl-3-methylimidazol-2-ylidene) are efficient catalysts (particularly the germyl derivatives) in both the silylative dehydrocoupling and hydrosilylation of electron rich alkenes derived from enamines. The steric hindrance exerted by the NHC ligand plays an important role in the selectivity of the reaction. Thus, bulky ligands are selective towards the silylative dehydrocoupling process whereas less sterically hindered promote the selective hydrosilylation reaction. The latter is, in addition, regioselective towards the β-carbon atom of both internal and terminal enamines, leading to β-aminosilanes. Moreover, the syn stereochemistry of the amino and silyl groups implies an anti Si-H bond addition across the double bond. All these facts point to a mechanistic picture that, according to experimental and computational studies, involves a non-classical hydrosilylation process through an outer-sphere mechanism in which a formal nucleophilic addition of the enamine to the silicon atom of a platinum σ-SiH complex is the key step. This is in sharp contrast with the classical Chalk-Harrod mechanism prevalent in platinum chemistry.

A Torquoselective Thermal 6π-Electrocyclization Approach to 1,4-Cyclohexadienes via Solvent-Aided Proton Transfer: Experimental and Theoretical Studies

The thermal 6π-electrocyclization of hexatriene typically delivers 1,3-cyclohexadiene (1,3-CHD). However, there is only limited success in directly synthesizing 1,4-cyclohexadiene (1,4-CHD) using such an approach, probably due to the difficulty in realizing thermally-forbidden 1,3-hydride shift after electrocyclic ring closure. The present study shows that by heating (2E,4E,6E)-hexatrienes bearing ester or ketone substituents at the C1-position in a mixture of toluene/MeOH or EtOH (2 : 1) solvents at 90-100 °C, 1,4-CHDs can be selectively synthesized. This is achieved through a torquoselective disrotatory 6π-electrocyclic ring closure followed by a proton-transfer process. The success of this method depends on the polar protic solvent-assisted intramolecular proton transfer from 1,3-CHD to 1,4-CHD, which has been confirmed by deuterium-labeling experiments. There are no reports to date for such a solvent-assisted isomerization. Density functional theory (DFT) studies have suggested that forming 1,3-CHD and subsequent isomerization is a thermodynamically feasible process, regardless of the functional groups involved. Two possible successive polar solvent-assisted proton-transfer pathways have been identified for isomerization.

Deep Electroreductive Chemistry: Harnessing Carbon- and Silicon-based Reactive Intermediates in Organic Synthesis

This Viewpoint outlines our recent contribution in electroreductive synthesis. Specifically, we leveraged deeply reducing potentials provided by electrochemistry to generate radical and anionic intermediates from readily available alkyl halides and chlorosilanes. Harnessing the distinct reactivities of radicals and anions, we have achieved several challenging transformations to construct C-C, C-Si, and Si-Si bonds. We highlight the mechanistic design principle that underpinned the development of each transformation and provide a view forward on future opportunities in growing area of reductive electrosynthesis.

Mechanism of Silylation of Vinyl Arenes by Hydrodisiloxanes Driven by Stoichiometric Amounts of Sodium Triethylborohydride-A Combined DFT and Experimental Study

The reactions of vinyl arenes with hydrodisiloxanes in the presence of sodium triethylborohydride were studied using experimental and computational methods. The expected hydrosilylation products were not detected because triethylborohydrides did not exhibit the catalytic activity observed in previous studies; instead, the product of formal silylation with dimethylsilane was identified, and triethylborohydride was consumed in stoichiometric amounts. In this article, the mechanism of the reaction is described in detail, with due consideration given to the conformational freedom of important intermediates and the two-dimensional curvature of the potential energy hypersurface cross sections. A simple way to reestablish the catalytic character of the transformation was identified and explained with reference to its mechanism. The reaction presented here is an example of the application of a simple transition-metal-free catalyst in the synthesis of silylation products, with flammable gaseous reagents replaced by a more convenient silane surrogate.

B(C6 F5 )3 -Catalyzed E-Selective Isomerization of Alkenes

Herein, we report the B(C₆ F₅ )₃ -catalyzed E-selective isomerization of alkenes. The transition-metal-free method is applicable across a diverse array of readily accessible substrates, giving access to a broad range of synthetically useful products containing versatile stereodefined internal alkenes. The reaction mechanism was investigated by using synthetic and computational methods.

Silyl formates as hydrosilane surrogates for the transfer hydrosilylation of ketones

A transfer hydrosilylation of ketones employing silyl formates as hydrosilane surrogates under mild conditions is presented. A total of 24 examples of ketones have been successfully converted to their corresponding silyl ethers with 61-99% yields in the presence of a PN^HP-based ruthenium catalyst and silyl formate reagent. The crucial role of the ligand for the transformation is demonstrated.

Salt-Stabilized Silylzinc Pivalates for Nickel-Catalyzed Carbosilylation of Alkenes

We herein report the preparation of solid and salt-stabilized silylzinc pivalates from the corresponding silyllithium reagents via transmetalation with Zn(OPiv)₂ . These resulting organosilylzinc pivalates show enhanced air and moisture stability and unique reactivity in the silylative difunctionalization of alkenes. Thus, a practical chelation-assisted nickel-catalyzed regioselective alkyl and benzylsilylation of alkenes has been developed, which provides an easy method to access alkyl silanes with broad substrate scope and wide functional group compatibility. Kinetic experiments highlight that the OPiv-coordination is crucial to improve the reactivity of silylzinc pivalates. Furthermore, late-stage functionalizations of druglike molecules and versatile modifications of the products illustrate the synthetical utility of this protocol.

Borane-Catalyzed Dehydrogenative C‒C Bond Formation of Indoles with N-Tosylhydrazones: An Experimental and Computational Study

A novel dehydrogenative C‒C bond formation of indoles and N-tosylhydrazones to di(indolyl)methanes (DIMs) has been demonstrated using tris(pentafluorophenyl)borane as catalyst. A wide range of functional groups can be tolerated under...

Oxime ester-enabled anti-Markovnikov hydrosilylation of alkenes

An oxime ester-enabled anti-Markovnikov hydrosilylation of alkenes is developed.

Indium-Catalysed Transfer Hydrogenation for the Reductive Cyclisation of 2-Alkynyl Enones towards Trisubstituted Furans

Indium tribromide catalysed the transfer hydrogenation from dihydroaromatic compounds, such as the commercially available γ-terpinene, to enones, which resulted in the cyclisation to trisubstituted furan derivatives. The reaction was initiated by a Michael addition of a hydride nucleophile to the enone subunit followed by a Lewis-acid-assisted cyclisation and the formation of a furan-indium intermediate and a Wheland intermediate derived from the dihydroaromatic starting material. The product was formed by protonation from the Wheland complex and replaced the indium tribromide substituent. In addition, a site-specific deuterium labelling of the dihydroaromatic HD surrogates resulted in site specific labelling of the products and gave useful insights into the reaction mechanism by H-D scrambling.

Indium Tribromide-Catalysed Transfer-Hydrogenation: Expanding the Scope of the Hydrogenation and of the Regiodivergent DH or HD Addition to Alkenes

The transfer‐hydrogenation as well as the regioselective and regiodivergent addition of H−D from regiospecific deuterated dihydroaromatic compounds to a variety of 1,1‐di‐ and trisubstituted alkenes was realised with InBr₃ in dichloro(m)ethane. In comparison with the previously reported BF₃⋅Et₂O‐catalysed process, electron‐deficient aryl‐substituents can be applied reliably and thereby several restrictions could be lifted, and new types of substrates could be transformed successfully in hydrodeuterogenation as well as deuterohydrogenation transfer‐hydrogenation reactions.

Silylium Ions: From Elusive Reactive Intermediates to Potent Catalysts

The history of silyl cations has all the makings of a drama but with a happy ending. Being considered reactive intermediates impossible to isolate in the condensed phase for decades, their actual characterization in solution and later in solid state did only fuel the discussion about their existence and initially created a lot of controversy. This perception has completely changed today, and silyl cations and their donor-stabilized congeners are now widely accepted compounds with promising use in synthetic chemistry. This review provides a comprehensive summary of the fundamental facts and principles of the chemistry of silyl cations, including reliable ways of their preparation as well as their physical and chemical properties. The striking features of silyl cations are their enormous electrophilicity and as such reactivity as super Lewis acids as well as fluorophilicity. Known applications rely on silyl cations as reactants, stoichiometric reagents, and promoters where the reaction success is based on their steady regeneration over the course of the reaction. Silyl cations can even be discrete catalysts, thereby opening the next chapter of their way into the toolbox of synthetic methodology.

Synergistic Ni/Cu catalyzed migratory arylsilylation of terminal olefins

Synthesis of organosilanes from alkenes is a very important topic owing to their wide applications. A Ni/Cu dual metal-catalyzed arylsilylation of terminal alkenes, featuring migratory selectivity, has been developed. A wide diversity of aliphatic silanes have been prepared from terminal alkenes, aryl halides and Suginome's reagent. This protocol is highlighted by excellent regioselectivity, mild reaction conditions and good functional group tolerance. In addition to benzylic positions, carbon-carbon bonds can also be constructed at allylic positions. Preliminary mechanistic studies suggest that the copper cocatalyst promotes the transmetalation of Suginome's reagent, and the addition of a PyrOx ligand inhibits the formation of side-products from the carbon-Heck pathway. Moreover, studies toward the nature of the PyrOx ligand revealed that the steric hindrance of the oxazoline moiety greatly affects the chain-walking process, but not the arylation step.

Tris(pentafluorophenyl)borane catalyzed C-C and C-heteroatom bond formation

A series of boron based Lewis acids have been reported to date, but among them, tris(pentafluorophenyl)borane (BCF) has gained the most significant attention in the synthetic chemistry community. The viability of BCF as a potential Lewis acid catalyst has been vastly explored in organic and materials chemistry due to its thermal stability and commercial availability. Most explorations of BCF chemistry in organic synthesis has occurred in the last two decades and many new catalytic reactivities are currently under investigation. This review mainly focuses on recent reports from 2018 onwards and provides a concise knowledge to the readers about the role of BCF in metal-free catalysis. The review has mainly been categorized by different types of organic transformation mediated through BCF catalysis for the C-C and C-heteroatom bond formation.

An Electroreductive Approach to Radical Silylation via the Activation of Strong Si-Cl Bond

The construction of C(sp³)-Si bonds is important in synthetic, medicinal, and materials chemistry. In this context, reactions mediated by silyl radicals have become increasingly attractive but methods for accessing these intermediates remain limited. We present a new strategy for silyl radical generation via electroreduction of readily available chlorosilanes. At highly biased potentials, electrochemistry grants access to silyl radicals through energetically uphill reductive cleavage of strong Si-Cl bonds. This strategy proved to be general in various alkene silylation reactions including disilylation, hydrosilylation, and allylic silylation under simple and transition-metal-free conditions.

The Cyclohexa-2,5-dienyl Group as a Placeholder for Hydrogen: Organocatalytic Michael Addition of an Acetaldehyde Surrogate

An aldehyde with a cyclohexa-2,5-dienyl group in the α-position is introduced as a storable surrogate of highly reactive acetaldehyde. The cyclohexa-2,5-dienyl unit is compatible with an enantioselective Michael addition to nitroalkenes promoted by a Hayashi-Jørgensen catalyst and can be removed by a boron Lewis acid mediated C-C bond cleavage. The robust two-step sequence does not require a large excess of the aldehyde component that is typically needed when directly using acetaldehyde.

A metal-free radical technique for cross-linking of polymethylhydrosiloxane or polymethylvinylsiloxane using AIBN

A new method was developed for the metal-free cross-linking of silicone rubbers. This process uses azobisisobutyronitrile (AIBN) to selectively react with Si-H and vinyl groups as a free-radical initiator for the thermal curing of polymethylhydrosiloxane (PMHS) and polymethylvinylsiloxane (PMVS). The AIBN-initiated curing reaction between the Si-H groups of PMHS generated Si-O-Si and Si-Si cross-links. In contrast, PMVS was cured via the formation of C-C bonds through "methyl-vinyl" and "vinyl-vinyl" mechanisms. Curing reactions were performed at 80-120 °C in air and confirmed by 13C and 29Si solid state NMR analyses and swelling trials.

Recent advances in transition metal-free catalytic hydroelementation (E = B, Si, Ge, and Sn) of alkynes

This review describes the recent advances in the transition metal-free hydroelementation of alkynes with various metalloid hydrides.

Dual reactivity of B(C6F5)3 enables the silylative cascade conversion of N-aryl piperidines to sila-N-heterocycles: DFT calculations

A theoretical study reveals that the dual reactivity of B(C₆F₅)₃ enables the unique silylative cascade conversion of N-aryl piperidines to bridged sila-N-heterocycles.

Lewis Acid Catalyzed Transfer Hydromethallylation for the Construction of Quaternary Carbon Centers

The design and gram-scale synthesis of a cyclohexa-1,4-diene-based surrogate of isobutene gas is reported. Using the highly electron-deficient Lewis acid B(C6 F5 )3 , application of this surrogate in the hydromethallylation of electron-rich styrene derivatives provided sterically congested quaternary carbon centers. The reaction proceeds by C(sp3 )-C(sp3 ) bond formation at a tertiary carbenium ion that is generated by alkene protonation. The possibility of two concurrent mechanisms is proposed on the basis of mechanistic experiments using a deuterated surrogate.

Contra-thermodynamic Olefin Isomerization by Chain-Walking Hydrofunctionalization and Formal Retro-hydrofunctionalization

We report a contra-thermodynamic isomerization of internal olefins to terminal olefins driven by redox reactions and formation of Si-F bonds. This process involves chain-walking hydrosilylation of internal olefins and subsequent formal retro-hydrosilylation. The process rests upon the high activities of platinum hydrosilylation catalysts for isomerization of metal alkyl intermediates and a new, metal-free process for the conversion of alkylsilanes to alkenes. By this approach, 1,2-disubstituted and trisubstituted olefins are converted to terminal olefins.

Functionalized polycarbonates via triphenylborane catalyzed polymerization-hydrosilylation

Triphenylborane catalyzes the copolymerization and terpolymerization of epoxides and CO₂ to yield polycarbonates with excellent dispersity. Via assisted tandem catalysis, these materials could be hydrosilylated in a one-pot fashion yielding modified polymeric materials. Using only a few reagents, materials with glass transition temperatures ranging from 37-110 °C were obtained.

σ-Silane Platinum(II) Complexes as Intermediates in C-Si Bond-Coupling Processes

Platinum complexes [Pt(NHC')(NHC)][BAr^F ] (in which NHC' denotes a cyclometalated N-heterocyclic carbene ligand, NHC) react with primary silanes RSiH₃ to afford the cyclometalated platinum(II) silyl complexes [Pt(NHC-SiHR')(NHC)][BAr^F ] through a process that involves the formation of C-Si and Pt-Si bonds with concomitant extrusion of H₂ . Low-temperature NMR studies indicate that the process proceeds through initial formation of the σ-SiH complexes [Pt(NHC')(NHC)(HSiH₂ R)][BAr^F ], which are stable at temperatures below -10 °C. At higher temperatures, activation of one Si-H bond followed by a C-Si coupling reaction generates an agostic SiH platinum hydride derivative [Pt(H)(NHC'-SiH₂ R)(NHC)][BAr^F ], which undergoes a second Si-H bond activation to afford the final products. Computational modeling of the reaction mechanism indicates that the stereochemistry of the silyl/hydride ligands after the first Si-H bond cleavage dictates the nature of the products, favoring the formation of a C-Si bond over a C-H bond, in contrast to previous results obtained for tertiary silanes. Furthermore, the process involves a trans-to-cis isomerization of the NHC ligand before the second Si-H bond cleavage.

B(C6 F5 )3 -Enabled Synthesis of a Cyclic cis-Arsaphosphene

The synthesis and characterization of an (arsino)phosphaketene, As(PCO){[N(Dipp)](CH₂ )}₂ (Dipp=2,6-diisopropylphenyl) is reported along with its subsequent reactivity with B(C₆ F₅ )₃ . When reacted in a stoichiometric ratio, B(C₆ F₅ )₃ drove the insertion of the P=C bond of the phosphaketene into one of the As-N bonds of the arsino functionality, affording an acid-stabilized, seven-membered, cyclic arsaphosphene. In contrast, when catalytic amounts of B(C₆ F₅ )₃ were employed, dimeric species, which formed through a formal [2+2] cycloaddition of the cyclic arsaphosphene, were generated. The cyclic arsaphosphene product represents the first example of such a compound in which the two substituents are arranged in a cis-configuration.

Metal-Free Transfer Hydroiodination of C-C Multiple Bonds

The design and a gram-scale synthesis of a bench-stable cyclohexa-1,4-diene-based surrogate of gaseous hydrogen iodide are described. By initiation with a moderately strong Brønsted acid, hydrogen iodide is transferred from the surrogate onto C-C multiple bonds such as alkynes and allenes without the involvement of free hydrogen iodide. The surrogate fragments into toluene and ethylene, easy-to-remove volatile waste. This hydroiodination reaction avoids precarious handling of hydrogen iodide or hydroiodic acid. By this, a broad range of previously unknown or difficult-to-prepare vinyl iodides can be accessed in stereocontrolled fashion.