A Mononuclear CoII Coordination Complex Locked in a Confined Space and Acting as an Electrochemical Water-Oxidation Catalyst: A “Ship-in-a-Bottle” Approach

Atomic-level design of metalloenzyme-like active pockets in metal-organic frameworks for bioinspired catalysis

Natural metalloenzymes with astonishing reaction activity and specificity underpin essential life transformations. Nevertheless, enzymes only operate under mild conditions to keep sophisticated structures active, limiting their potential applications. Artificial metalloenzymes that recapitulate the catalytic activity of enzymes can not only circumvent the enzymatic fragility but also bring versatile functions into practice. Among them, metal-organic frameworks (MOFs) featuring diverse and site-isolated metal sites and supramolecular structures have emerged as promising candidates for metalloenzymes to move toward unparalleled properties and behaviour of enzymes. In this review, we systematically summarize the significant advances in MOF-based metalloenzyme mimics with a special emphasis on active pocket engineering at the atomic level, including primary catalytic sites and secondary coordination spheres. Then, the deep understanding of catalytic mechanisms and their advanced applications are discussed. Finally, a perspective on this emerging frontier research is provided to advance bioinspired catalysis.

Directing the Selectivity of Oxygen Reduction to Water by Confining a Cu Catalyst in a Metal Organic Framework

Electrocatalysis is to play a key role in the transition towards a sustainable chemical and energy industry and active, stable and selective redox catalysts are much needed. Porous structures such as metal organic frameworks (MOFs) are interesting materials as these may influence selectivity of chemical reactions through confinement effects. In this work, the oxygen reduction catalyst Cu-tmpa was incorporated into the NU1000 MOF. Confinement of the catalyst within NU1000 steers the selectivity of the oxygen reduction reaction (ORR) towards water rather than peroxide. This is attributed to retention of the obligatory H2 O2 intermediate in close proximity to the catalytic center. Moreover, the resulting NU1000|Cu-tmpa MOF shows an excellent activity and stability in prolonged electrochemical studies, illustrating the potential of this approach.

Hydroxylated Polyoxometalate with Cu(II)- and Cu(I)-Aqua Complexes: A Bifunctional Catalyst for Electrocatalytic Water Splitting at Neutral pH

A sole inorganic framework material [Li(H2O)4][{CuI(H2O)1.5} {CuII(H2O)3}2{WVI12O36(OH)6}]·N2·H2S·3H2O (1) consisting of a hydroxylated polyoxometalate (POM) anion, {WVI12O36(OH)6}6-, a mixed-valent Cu(II)- and Cu(I)-aqua cationic complex species, [{CuI(H2O)1.5}{CuII(H2O)3}2]5+, a Li(I)-aqua complex cation, and three solvent molecules, has been synthesized and structurally characterized. During its synthesis, the POM cluster anion gets functionalized with six hydroxyl groups, i.e., six WVI-OH groups per cluster unit. Moreover, structural and spectral analyses have shown the presence of H2S and N2 molecules in the concerned crystal lattice, formed from "sulfate-reducing ammonium oxidation (SRAO)". Compound 1 functions as a bifunctional electrocatalyst exhibiting oxygen evolution reaction (OER) by water oxidation and hydrogen evolution reaction (HER) by water reduction at the neutral pH. We could identify that the hydroxylated POM anion and copper-aqua complex cations are the functional sites for HER and OER, respectively. The overpotential, required to achieve a current density of 1 mA/cm2 in the case of HER (water reduction), is found to be 443 mV with a Faradaic efficiency of 84% and a turnover frequency of 4.66 s-1. In the case of OER (water oxidation), the overpotential needed to achieve a current density of 1 mA/cm2 is obtained to be 418 mV with a Faradaic efficiency of 80% and turnover frequency of 2.81 s-1. Diverse electrochemical controlled experiments have been performed to conclude that the title POM-based material functions as a true bifunctional catalyst for electrocatalytic HER as well as OER at the neutral pH without catalyst reconstruction.

Molecular Catalysis of Energy Relevance in Metal-Organic Frameworks: From Higher Coordination Sphere to System Effects

The modularity and synthetic flexibility of metal-organic frameworks (MOFs) have provoked analogies with enzymes, and even the term MOFzymes has been coined. In this review, we focus on molecular catalysis of energy relevance in MOFs, more specifically water oxidation, oxygen and carbon dioxide reduction, as well as hydrogen evolution in context of the MOF-enzyme analogy. Similar to enzymes, catalyst encapsulation in MOFs leads to structural stabilization under turnover conditions, while catalyst motifs that are synthetically out of reach in a homogeneous solution phase may be attainable as secondary building units in MOFs. Exploring the unique synthetic possibilities in MOFs, specific groups in the second and third coordination sphere around the catalytic active site have been incorporated to facilitate catalysis. A key difference between enzymes and MOFs is the fact that active site concentrations in the latter are often considerably higher, leading to charge and mass transport limitations in MOFs that are more severe than those in enzymes. High catalyst concentrations also put a limit on the distance between catalysts, and thus the available space for higher coordination sphere engineering. As transport is important for MOF-borne catalysis, a system perspective is chosen to highlight concepts that address the issue. A detailed section on transport and light-driven reactivity sets the stage for a concise review of the currently available literature on utilizing principles from Nature and system design for the preparation of catalytic MOF-based materials.

Observation of oxygen evolution over a {Ni12}-cluster-based metal-organic framework

The development of efficient electrocatalysts based on non-noble metals for oxygen evolution reaction (OER) remains an important and challenging task. Multinuclear transition-metal clusters with high structural stability are promising OER catalysts but their catalytic role is poorly understood. Here we report the crystallographic observation of OER activity over robust {Ni12}-clusters immobilised in a porous metal-organic framework, NKU-100, by single-crystal X-ray diffraction as a function of external applied potential. We observed the aggregation of confined oxygen species around the {Ni12}-cluster as a function of applied potential during the electrocatalytic process. The refined occupancy of these oxygen species shows a strong correlation with the variation of current density. This study demonstrates that the enrichment of oxygen species in the secondary co-ordination sphere of multinuclear transition-metal clusters can promote the OER activity.

Heterogenization of Molecular Water Oxidation Catalysts in Electrodes for (Photo)Electrochemical Water Oxidation

Water oxidation is still one of the most important challenges to develop efficient artificial photosynthetic devices. In recent decades, the development and study of molecular complexes for water oxidation have allowed insight into the principles governing catalytic activity and the mechanism as well as establish ligand design guidelines to improve performance. However, their durability and long-term stability compromise the performance of molecular-based artificial photosynthetic devices. In this context, heterogenization of molecular water oxidation catalysts on electrode surfaces has emerged as a promising approach for efficient long-lasting water oxidation for artificial photosynthetic devices. This review covers the state of the art of strategies for the heterogenization of molecular water oxidation catalysts onto electrodes for (photo)electrochemical water oxidation. An overview and description of the main binding strategies are provided explaining the advantages of each strategy and their scope. Moreover, selected examples are discussed together with the the differences in activity and stability between the homogeneous and the heterogenized system when reported. Finally, the common design principles for efficient (photo)electrocatalytic performance summarized.

A chromotropic PtIIPdIICoII coordination polymer with dual electrocatalytic activity for water reduction and oxidation

Here, we present a heterometallic coordination polymer that exhibits heterogeneous electrocatalytic activities for both water reduction and water oxidation. Treatment of the PtII2PdII2 tetranuclear complex [Pd₂{Pt(NH₃)₂(D-pen)₂}₂] ([1]; D-H₂pen = D-penicillamine) with CoX₂ (X = Cl, Br) provided (PtII2PdII2CoII2)_n coordination polymers [Co₂(H₂O)₆(1)]X₄ ([2]X₄), in which the PtII2PdII2 units of [1] are linked by [Co₂(μ-H₂O)(H₂O)₅]⁴⁺ moieties in a 3D network structure. [2]X₄ showed a colour change from orange to dark green upon dehydration, reflecting the geometrical conversion of the Co^II centres in [Co₂(μ-H₂O)(H₂O)₅]⁴⁺ from an octahedron to a tetrahedron by the removal of aqua ligands. While both [2]Cl₄ and [2]Br₄ electrochemically catalysed water reduction to H₂ in the solid state due to the presence of Pd^II active centres, water oxidation to O₂ was catalysed only by [2]Br₄, which is ascribed to the presence of Br^- ions that mediate the catalytic reactions that occurred at Co^II active centres.

Efficient homogeneous electrocatalytic hydrogen evolution using a Ni-containing polyoxometalate catalyst

NiCl₂·6H₂O ([Ni(H₂O)₆]₂Cl₂) per se does not show electrocatalytic hydrogen evolution reaction activity (HER) in an acidic aqueous medium as well as in neutral water. Interestingly, when [Ni(H₂O)₆]²⁺ is present in a polyoxovanadate matrix, for example, in the compound K₂[Ni(H₂O)₆]₂[V₁₀O₂₈]·4H₂O (1), it exhibits homogeneous electrocatalytic HER activity in an acidic aqueous solution with a turn over frequency of 2.1 s^-1 and an effective low overpotential of 127 mV at pH 2.3. Compound 1 is the first nickel-containing polyoxometalate catalyst for hydrogen production via homogeneous electrocatalytic proton reduction without its decomposition under electrochemical conditions of HER.

Metal-Organic Frameworks-Derived Self-Supported Carbon-Based Composites for Electrocatalytic Water Splitting

Electrocatalytic water splitting has been considered as a promising strategy for the sustainable evolution of hydrogen energy and storage of intermittent electric energy. Efficient catalysts for electrocatalytic water splitting are urgently demanded to decrease the overpotentials and promote the sluggish reaction kinetics. Carbon-based composites, including heteroatom-doped carbon materials, metals/alloys@carbon composites, metal compounds@carbon composites, and atomically dispersed metal sites@carbon composites have been widely used as the catalysts due to their fascinating properties. However, these electrocatalysts are almost powdery form, and should be cast on the current collector by using the polymeric binder, which would result in the unsatisfied electrocatalytic performance. In comparison, a self-supported electrode architecture is highly attractive. Recently, self-supported metal-organic frameworks (MOFs) constructed by coordination of metal centers and organic ligands have been considered as suitable templates/precursors to construct free-standing carbon-based composites grown on conductive substrate. MOFs-derived carbon-based composites have various merits, such as the well-aligned array architecture and evenly distributed active sites, and easy functionalization with other species, which make them suitable alternatives to non-noble metal-included electrocatalysts. In this review, we intend to show the research progresses by employment of MOFs as precursors to prepare self-supported carbon-based composites. Focusing on these MOFs-derived carbon-based nanomaterials, the latest advances in their controllable synthesis, composition regulation, electrocatalytic performances in hydrogen evolution reaction (HER), oxygen evolution reaction (OER), and overall water splitting (OWS) are presented. Finally, the challenges and perspectives are showed for the further developments of MOFs-derived self-supported carbon-based nanomaterials in electrocatalytic reactions.

Macrocycle-Based Metal-Organic Frameworks with NO2-Driven On/Off Switch of Conductivity

Conductive metal-organic frameworks (MOFs) have a wide range of applications in supercapacitors, electrocatalysts, and fuel cells, while gas-driven conductive MOFs have not yet been synthesized so far. Herein, we report a gas-driven conductive MOF (A) constructed from calix[4]resorcinarene macrocycle and Co(II) cations, which shows the conductivity enhancement by about eight orders of magnitude through NO₂ adsorption. The conductivities of MOF A before and after the adsorption of NO₂ were calculated to be about 1.3 × 10^-11 and 8.4 × 10^-4 S/cm, respectively. MOF A realizes the conversion from an insulator to a conductor by adsorbing NO₂. When NO₂ is evacuated, MOF A quickly changes from a conductor back to an insulator in 42 s. In the crystal structure of NO₂-adsorbed MOF (termed as A-NO₂), NO₂ molecule connects Co(II) and uncoordinated carboxylate groups through hydrogen-bonding interactions to form a conductive pathway, greatly reducing the electron transmission distance between each two metal clusters. In addition, NO₂ molecule and H₃O⁺ may also form a conductive pathway by hydrogen-bonding interactions. This work presents an interesting macrocycle-based MOF with a NO₂-driven on/off conductivity switch, proving the possibility for designing advanced gas-driven conductive systems.

Zeolite-Y encapsulated cobalt(ii) Schiff-base complexes employed for photocatalytic dye-degradation and upcycling CO2

Planar cobalt(ii) Schiff-base complexes show modified structural and functional properties after encapsulation inside zeolite-Y.

Molecular and heterogeneous water oxidation catalysts: recent progress and joint perspectives

The recent synthetic and mechanistic progress in molecular and heterogeneous water oxidation catalysts highlights the new, overarching strategies for knowledge transfer and unifying design concepts.

Five novel MOFs with various dimensions as efficient catalysts for oxygen evolution reactions

Five novel MOFs with various dimensions designed as high-efficiency electrocatalysts for oxygen evaluation reactions.

Versatility of Amide-Functionalized Co(II) and Ni(II) Coordination Polymers: From Thermochromic-Triggered Structural Transformations to Supercapacitors and Electrocatalysts for Water Splitting

The new 2D coordination polymers (CPs) [M(L)₂(H₂O)₂]_n [M = Co^II (1) and Ni^II (2); L = 4-(pyridin-3-ylcarbamoyl)benzoate] were synthesized from pyridyl amide-functionalized benzoic acid (HL). They were characterized by elemental, Fourier transform infrared, thermogravimetric, powder X-ray diffraction (PXRD), and single-crystal X-ray diffraction (XRD) structural analyses. Single-crystal XRD analysis revealed the presence of a 2D polymeric architecture, and topological analyses disclose a 2,4-connected binodal net. A thermochromic effect leads to the production of two new CPs, 1' and 2', by heating at ca. 220 °C, accompanied by a color change from orange to purple in the case of 1 and from blue to green in the case of 2. The transformation of 1 to 1' takes place through an intermediate (1a) with a different twist of the L^- ligand, leading to the formation of a 1D polymeric architecture, as proven by single-crystal XRD analysis. The addition of water or keeping 1' or 2' in air for several days leads to regeneration of 1 or 2, respectively. The thermochromic-triggered structural transformations of 1 and 2 were further substantiated by PXRD and UV-vis ground-state diffuse-reflectance absorption studies. The supercapacitance ability of the CPs 1 and 2 and a Ni-Co composite (made from mixing the CPs 1 and 2) was investigated by electroanalytical techniques, such as cyclic voltammetry and electrochemical impedance spectroscopy. The CP 2 exhibits the highest specific capacity of 273.8 C g^-1 at an applied current density of 1.5 A g^-1. These newly developed CPs further act as electrocatalysts for the water-splitting reaction.

2D MOFs with Ni(II), Cu(II), and Co(II) as Efficient Oxygen Evolution Electrocatalysts: Rationalization of Catalytic Performance vs Structure of the MOFs and Potential of the Redox Couples

Earth-abundant transition-metal-based metal-organic frameworks (MOFs) are of immense interest for the development of efficient and durable heterogeneous water splitting electrocatalysts. This repot explores the design of two-dimensional (2D) MOFs with redox-active metal centers (Ni(II), Co(II), and Cu(II)) containing two types of electron-rich linkers such as bis(5-azabenzimidazole), linear L₁ and angular L₂, and aromatic dicarboxylates. The electron-rich linkers are considered to stabilize the higher oxidation state of the redox-active metal centers in the course of the electrocatalytic oxygen evolution reaction (OER) process. The 2D MOFs of L₁ and L₂ with Co(II) (1 and 3) and Ni(II) (2 and 4) have been produced via the conventional hydrothermal synthesis, while the MOFs of Cu(II) (Cu@1 and Cu@3) are obtained by the postsynthetic transmetallation reaction of MOFs 1 and 3. The electrocatalytic OER activities of the six MOFs have been studied to explore the influence of the redox potential of the transition-metal quasi-reversible couples and the coordination environment around the redox-active metal centers in the electrocatalytic activity. The lowest overpotential of 370 mV exhibited by MOF 2 with the highest current density and TOF value indicates the importance of the presence of coordinated water molecules and the lowest redox potential value of the most favorable quasi-reversible couple Ni⁺²/Ni⁺³. These catalysts exhibit a remarkable stability up to 1000 OER cycles. These studies pave the way for the design of MOF materials toward the development of a promising heterogeneous OER electrocatalyst.

A tetranuclear cobalt(ii) phosphate possessing a D4R core: an efficient water oxidation catalyst

The reaction of Co(OAc)2·4H2O with a sterically hindered phosphate ester, LH2, afforded a tetranuclear complex, [CoII(L)(CH3CN)]4·5CH3CN (1) [LH2 = 2,6-(diphenylmethyl)-4-isopropyl-phenyl phosphate]. The molecular structure of 1 reveals that it is a tetranuclear assembly where the Co(ii) centers are present in the alternate corners of a cube. The four Co(ii) centers are held together by four di-anionic [L]2- ligands. The fourth coordination site on Co(ii) is taken by an acetonitrile ligand. Changing the Co(ii) precursor from Co(OAc)2·4H2O to Co(NO3)2·6H2O afforded a mononuclear complex [CoII(LH)2(CH3CN)2(MeOH)2](MeOH)2 (2). In 2, the Co(ii) centre is surrounded by two monoanionic [LH]- ligands and a pair of methanol and acetonitrile solvents in a six-coordinate arrangement. 1 has been found to be an efficient catalyst for electrochemical water oxidation under highly basic conditions while the mononuclear analogue, 2, does not respond to electrochemical water oxidation. The tetranuclear catalyst has excellent electrochemical stability and longevity, as established by chronoamperometry and >1000 cycle durability tests under highly alkaline conditions. Excellent current densities of 1 and 10 mA cm-2 were achieved with overpotentials of 354 and 452 mV respectively. The turnover frequency of this catalyst was calculated to be 5.23 s-1 with an excellent faradaic efficiency of 97%, indicating the selective oxygen evolution reaction (OER) occurring with the aid of this catalyst. A mechanistic insight into the higher activity of complex 1 towards the OER compared to that of complex 2 is also provided using density functional theory based calculations.

Optimized trimetallic benzotriazole-5-carboxylate MOFs with coordinately unsaturated active sites as an efficient electrocatalyst for the oxygen evolution reaction

Enhanced OER performance of bimetallic and trimetallic MOFs were gained through synergistic effect in Fe/Co/Ni unsaturated coordination sites.

Coordination polymers as heterogeneous catalysts in hydrogen evolution and oxygen evolution reactions

This article highlights various strategies of designing coordination polymers for catalysing water splitting reactions.

Evolution of metal organic frameworks as electrocatalysts for water oxidation

The development of metal organic framework based water oxidation catalysts is discussed here in connection with various design strategies.

Cobalt Metal-Organic Framework Based on Two Dinuclear Secondary Building Units for Electrocatalytic Oxygen Evolution

The synthesis of a new microporous metal-organic framework (MOF) based on two secondary building units, with dinuclear cobalt centers, has been developed. The employment of a well-defined cobalt cluster results in an unusual topology of the Co₂-MOF, where one of the cobalt centers has three open coordination positions, which has no precedent in MOF materials based on cobalt. Adsorption isotherms have revealed that Co₂-MOF is in the range of best CO₂ adsorbents among the carbon materials, with very high CO₂/CH₄ selectivity. On the other hand, dispersion of Co₂-MOF in an alcoholic solution of Nafion gives rise to a composite (Co₂-MOF@Nafion) with great resistance to hydrolysis in aqueous media and good adherence to graphite electrodes. In fact, it exhibits high electrocatalytic activity and robustness for the oxygen evolution reaction (OER), with a turnover frequency number value superior to those reported for similar electrocatalysts. Overall, this work has provided the basis for the rational design of new cobalt OER catalysts and related materials employing well-defined metal clusters as directing agents of the MOF structure.

Thiacalixarene-Supported Irregular Co26 and Ni28 High-Nuclearity Clusters with Pyridyl-Diphosphonates: Strategies to Create Active Metal Sites and Fabricate Multicomponent Materials

Two new irregularity high-nuclearity clusters [Co₂₆(TC4A)₆(HL)₄Cl₄(HCOO)₄(CH₃O)₂(OH)₂(DMF)₁₀(H₂O)₅] (+ solvent) (Co₂₆) and [Ni₂₈(TC4A)₆(HL)₆(PO₄)₂(μ₃-O)₂Cl₂(CH₃OH)₁₄(H₂O)₂(DMF)₈][(CH₃NH₂CH₃)₄] (+ solvent) (Ni₂₈) have been solvothermally synthesized by p- tert-butylthiacalix[4]arene (H₄TC4A), transition metals (CoCl₂·6H₂O/NiCl₂·6H₂O), and 1-hydroxy-2-(3-pyridinyl)ethylidene-1,1-diphosphonic acid (H₅L). The clusters were structurally characterized by single crystal X-ray diffraction, PXRD, TGA, and FT-IR spectrum and Raman spectrum. Co₂₆ features a rodlike Co₂₆ core constructed by six Co₄-TC4A secondary building units (SBUs) and four HL^4- with two extra cobalt ions. Ni₂₈ cluster represents a flowerlike Ni₂₈ core built from six Ni₄-TC4A SBUs, six HL^4-, and four additional nickel ions. The multidentate risedronic acid displaying various new coordination mode bonds with SBUs to assemble two nanoclusters that enable high density possible coordinatively unsaturated metal sites (PCUMSs). Co₂₆ and Ni₂₈ clusters can be directly dispersed on carbon paper (CP) and showed extraordinary oxygen evolution reaction (OER) activity due to the larger exposed liable coordination active metal sites. The thermodecomposition of both nanoclusters at different temperatures afforded serial multicomponent complexes.

Co (II) Boron Imidazolate Framework with Rigid Auxiliary Linkers for Stable Electrocatalytic Oxygen Evolution Reaction

Metal-organic frameworks (MOFs) have significant potential for practical application in catalysis. However, many MOFs are shown to be sensitive to aqueous solution. This severely limits application of MOFs in electrocatalytic operations for energy production and storage. Here, a Co (II) boron imidazolate framework CoB(im)4(ndc)0.5 (BIF-91, im = imidazolate, ndc = 2,6-naphthalenedicarboxylate) that is rationally designed and successfully tested for electrocatalytic application in strong alkaline (pH ≈ 14) solution is reported. In such a BIF system, the inherent carboxylate species segment large channel spaces into multiple domains in which each single channel is filled with ndc ligands through the effect of zeolite channel confinement. These ligands, with strong C-H···π interaction, act as a rigid auxiliary linker to significantly enhance the structural stability of the BIF-91 framework. Additionally, the π-conjugated effect in BIF-91 stabilizes dopant Fe (III) at the atomic scale to construct Fe-immobilized BIF-91 (Fe@BIF-91). Due to the synergistic effect between Fe (III) guest and Co (II) in the framework, the Fe@BIF-91 acts as an active and stable electrocatalyst for the oxygen evolution reaction in alkaline solution.

A trinuclear cobalt-based coordination polymer as an efficient oxygen evolution electrocatalyst at neutral pH

The dearth of an efficient, robust, abundant and cost-effective water oxidation catalyst is debatably the major hurdle for the technological advancement of artificial photosynthesis devices. Herein, a three dimensional (3D) cobalt-based coordination polymer {[Co₃(pyz)(fa)₃(dmso)₂]·2H₂O}_n, (1) (pyz = pyrazine, fa = fumarate, dmso = dimethyl sulfoxide) has been synthesized and demonstrated to act as an efficient electrocatalyst towards water oxidation at neutral pH. Compound 1 displays a stair-like arrangement parallel to the b-axis, with the cobalt clusters arranged in a zigzag fashion, and contains small, honeycomb-like channels parallel to the c-axis. Compound 1 shows a remarkable activity for water oxidation and attains a current density of 1 mA.cm^-2 at low overpotential (η = 257 mV) with a Tafel slope value of 80.5 mV.dec^-1. This high performance of 1 in catalysing the water oxidation reaction is attributed to its unique 3-D architecture. The results of electrochemical investigations, including long-term and controlled potential electrolysis, are anticipated to guide the forthcoming advancement in creating efficient, cheap and noble metal (Pt/Ru/Ir) free catalysts for the water oxidation reaction.

A General Method to Ultrathin Bimetal-MOF Nanosheets Arrays via In Situ Transformation of Layered Double Hydroxides Arrays

Structure engineering of ultrathin metal-organic framework (MOF) nanosheets to self-supporting and well-aligned MOF superstructures is highly desired for diverse applications, especially important for electrocatalysis. In this work, a facile layered double hydroxides in situ transformation strategy is developed to synthesize ultrathin bimetal-MOF nanosheets (BMNSs) arrays on conductive substrates. This approach is versatile, and applicable to obtain various BMNSs or even trimetal-MOF nanosheets arrays on different substrates. As a proof of concept application, the obtained ultrathin NiCo-BDC BMNSs array exhibits an excellent catalytic activity toward the oxygen evolution reaction with an overpotential of only 230 mV to reach a current density of 10 mA cm^-2 in 1 m KOH. The present work demonstrates a strategy to prepare ultrathin bimetal-MOF nanosheets arrays, which might open an avenue for various promising applications of MOF materials.

Activating hierarchically hortensia-like CoAl layered double hydroxides by alkaline etching and anion modulation strategies for the efficient oxygen evolution reaction

Hierarchically porous hortensia-like CoAl hydroxysulfide as an efficient electrocatalyst for the OER is designed and developed.

Supramolecular Organic Photocatalyst Containing a Cubanelike Water Cluster and Donor-Acceptor Stacks: Hydrogen Evolution and Dye Degradation under Visible Light

Supramolecular organic photocatalysts are scarcely explored for the generation of sustainable energy as well as for environmental remediation purposes. An organic photocatalyst, containing a cubanelike water cluster and donor-acceptor stacks, was efficiently developed through a supramolecular approach. The material exhibited remarkable photocatalytic hydrogen generation, in the absence of any cocatalyst, with excellent stability and recyclability. The photoactivity was further assessed through time-resolved photoluminescence and electrochemical impedance spectroscopy. The material also exhibited highly efficient sunlight-driven photocatalytic activity through the degradation of harmful organic dye methylene blue.

The Design of Water Oxidation Electrocatalysts from Nanoscale Metal-Organic Frameworks

Metal-organic frameworks (MOFs), as the shining stars in field of materials science, have become an important class of highly efficient catalysts for electrochemical oxygen evolution reaction (OER). Although tremendous progresses have been achieved by exploring two MOF-based groups: the MOF-derived electrocatalysts and the direct MOF electrocatalysts in recently years, it appears that both activity and stability of these two kinds of MOF-based electrocatalysts have big rooms for improvement. In order to overcome these issues, a comprehensive summary of the advanced designs of catalysts is timely urgent. Here, the advanced engineering strategies including structural, carbon-based, metal-based and substrate-engineered strategies of MOF-derived catalysts have been introduced. In addition, the detailed explorations of the nanostructured direct MOF catalysts for OER are also reviewed. Finally, short comments and perspectives about the future development of the MOF-based OER electrocatalysts are provided.

Interpenetrated and Polythreaded CoII-Organic Frameworks as a Supercapacitor Electrode Material with Ultrahigh Capacity and Excellent Energy Delivery Efficiency

Synthesizing kinetically stable coordination polymers (CPs) through ligand functionalization can effectively improve their supercapacitive performances. Herein, we have successfully synthesized three novel and topological Co-CPs by varying the flexible N-donor ligand and inorganic anions, namely, interpenetrated [Co(HTATB)( o-bib)]·H₂O, extended two-dimensional (2D) layered Co(HTATB)( m-bib)·2H₂O, and three-dimensional (3D) Co(HTATB)( m-bib), where bib is the flexible N-donor bis((1 H-imidazol-1-yl)methyl)benzene linker (where o- and m- refer to ortho and meta positions, respectively) ligand and HTATB is the partial deprotonation mode from 4,4',4″- s-triazine-2,4,6-triyl-tribenzoic acid. Various Co-CPs have been directly applied in the field of supercapacitors. All these framework materials exhibit high capacitance, excellent energy delivery efficiency, and good cycling performance. For instance, the maximum specific capacitance for penetrated 3D networks is 2572 F g^-1 at 2.0 A g^-1, and the mean energy delivery efficiency is up to 92.7% based on the tested current densities. Compared with extensional 2D layered and 3D networks, the 3D interpenetrated and polythreaded architectures could provide more active sites and thus promote fast charging and discharging processes. Furthermore, the Li⁺ uptake-release abilities of the Co-based CPs are also investigated, and the initial discharge capacity value for the 3D interpenetrated structures can reach up to 1792 mA h g^-1 at a current density of 50 mA g^-1.

Electrocatalytic water oxidation by a molecular catalyst incorporated into a metal-organic framework thin film

A molecular water oxidation catalyst, [Ru(tpy)(dcbpy)(OH₂)](ClO₄)₂ (tpy = 2,2':6',2''-terpyridine, dcbpy = 2,2'-bipyridine-5,5'-dicarboxylic acid) [1], has been incorporated into FTO-grown thin films of UiO-67 (UiO = University of Oslo), by post-synthetic ligand exchange. Cyclic voltammograms (0.1 M borate buffer at pH = 8.4) of the resulting UiO67-[RuOH₂]@FTO show a reversible wave associated with the Ru^III/II couple in the anodic scan, followed by a large current response that arises from electrocatalytic water oxidation beyond 1.1 V vs. Ag/AgCl. Water oxidation can be observed at an applied potential of 1.5 V over the timescale of hours with a current density of 11.5 μA cm^-2. Oxygen evolution was quantified in situ over the course of the experiment, and the Faradaic efficiency was calculated as 82%. Importantly, the molecular integrity of [1] during electrocatalytic water oxidation is maintained even on the timescale of hours under turnover conditions and applied voltage, as evidenced by the persistence of the wave associated with the Ru^III/II couple in the CV. This experiment highlights the capability of metal organic frameworks like UiO-67 to stabilize the molecular structure of catalysts that are prone to form higher clusters in homogenous phase.