Molecular‐Curvature‐Induced Spontaneous Formation of Curved and Concentric Lamellae through Nucleation

ABC-Type, Bola-Form Giant Surfactants: Synthesis and Self-Assembly

Due to the fast phase separation kinetics and small feature size, the self-assembly of giant molecules has attracted lots of attention. However, there is not much study on multicomponent giant surfactants. In this work, through a modular synthetic strategy, different polyhedral oligomeric silsesquioxane (POSS)-based molecular nanoparticles are installed with diverse functionalities (hydrophobic octavinyl POSS (VPOSS), hydrophilic dihydroxyl-functionalized POSS (DPOSS), and omniphobic perfluoroalkyl-chain-functionalized POSS (FPOSS)) on the ends of one polystyrene (PS) chain to build up a series of triblock bola-form giant surfactants denoted as XPOSS-PS_n -FPOSS (X represents V or D). The target molecules are prepared by a combination of atom transfer radical polymerization (ATRP), esterification, as well as Cu(I)-catalyzed azide-alkyne cycloaddition (CuAAC) and thiol-ene "click" reactions. These macromolecules are thoroughly characterized by combined technologies including nuclear magnetic resonance (NMR), size exclusion chromatography (SEC), and matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS) analyses. It is revealed by small angle X-ray scattering (SAXS) and transmission electron microscopy (TEM) that VPOSS-PS_n -FPOSS adopts a two-phase separation scenario where VPOSS and POSS are segregated in one phase. DPOSS-PS_n -FPOSS with a third hydrophilic DPOSS shows a three-phase separation scenario, where highly ordered phase structures are difficult to develop owing to the competition of mutual phase separation processes and may be trapped in kinetically metastable states.

Phase Behavior and Phase Diagram of Polystyrene-b-Poly(Perfluorooctylethyl Acrylates)

Fluorocontaining polymers bearing special properties are unique and important materials in modern society. In this work, we focused on the phase behavior and phase diagram of poly(styrene-block-perfluorooctylethyl acrylate) with a volume fraction varying from 0.2 to 0.8. Small-angle X-ray scattering and transmission electron microscopy showed the phase formation in the sequence of hexagonally packed cylinders (HEX) to lamellar layers (LAM) to inverse hexagonally packed cylinders (iHEX) in this series of block polymers. Wide-angle X-ray diffraction experiments proved that the fluorodomains of the LAM phases and the matrix of iHEX phases contained layered structures formed by the crystallization of fluorosegments. During heating, the self-assembled lattice remained intact even after the melting of fluorodomain, with barely changed lattice parameters. Such hierarchical structural formation was understood by chain conformation and domain interaction, which may provide new insight into the molecular design of advanced materials.

Macromolecular Isomerism in Giant Molecules

Macromolecular isomerism has been an important yet largely understudied subject. Giant molecules based on molecular nanoparticles exhibit properties highly dependent on the primary structures, providing a platform for such studies. Various isomers have been designed, synthesized and characterized, including sequence-, regio-, and topo-isomers. The self-assembly of these isomers is influenced by the distinct symmetry and collective interaction of each building block in a subtle and delicate way. The results suggest that isomerism may be exploited as a new way for fine-tuning the structures and properties of macromolecules, which should be of great interest in both fundamental research and technical innovation.

A catalytic study of water dispersed gold nanoparticles for the hydrolytic oxidation of diorganosilanes – en route formation of a Pickering catalyst and synthesis of tetraorganodisiloxane-1,3-diols

This study unfolds the formation of a AuNP-stabilized Pickering catalyst (PIC) en route to the hydrolytic oxidation of diorganosilanes. The method offers a viable route for the synthesis of disiloxane-1,3-diols.

Fabrication of Customized Nanogel Carriers From a UV-Triggered Dynamic Self-Assembly Strategy

Recent advances in self-assembled nanogel carriers have allowed precise design of hierarchical structures by a low-cost solution-phase approach. Typically, photochemical strategy on the tailor of morphology and dimension has emerged as a powerful tool, because light-trigger has exceptional advantages of an instant "on/off" function and spatiotemporal precision at arbitrary time. Herein, we report a tunable manipulation of sequentially morphological transition via a "living" thiol-disulfide exchange reaction from a UV-tailored hierarchical self-assembly strategy. By varying the irradiation time, the photochemical method can easily fabricate and guide a series of attractively architectural evolution in dilute aqueous solutions, by which the improving hydrophobicity and sensitive redox-responsiveness endowed these disulfide-linked nanoparticles with remarkable capacities of abundant encapsulation, effective separation, and controlled release of hydrophobic cargoes. Notably, once the exchange reaction is suspended at any point of time by removing the UV lamp, these active sites within the nanogel carriers are instantaneous deactivated and the correspondingly structural transformations are also not conducted any more. However, if the stable inert sites are reactivated as needed by turning on the UV light, the interrupting morphology evolution can continue its previous steps, which may provide a simple and novel approach to fabricating the desired self-assemblies in solutions. With regard to this advanced functionality, various nanogel carriers with customizable structures and properties have been yielded and screened for cancer therapy. Thus, this "living" controlled self-assembled method to program morphology evolution in situ is a universal strategy that will pave novel pathways for creating sequential shape-shifting and size-growing nanostructures and constructing uniform nanoscopic functional entities for advanced bio-applications.

Engineering self-assembly of giant molecules in the condensed state based on molecular nanoparticles

In biological systems, it is well-known that the activities and functions of biomacromolecules are dictated not only by their primary chemistries, but also by their secondary, tertiary, and quaternary hierarchical structures. Achieving control of similar levels in synthetic macromolecules is yet to be demonstrated. Most of the critical molecular parameters associated with molecular and hierarchical structures, such as size, composition, topology, sequence, and stereochemistry, are heterogenous, which impedes the exploration and understanding of structure formation and manipulation. Alternatively, in the past few years we have developed a unique giant molecule system based on molecular nanoparticles, in which the above-mentioned molecular parameters, as well as interactions, are precisely defined and controlled. These molecules could self-assemble into a myriad of unconventional and unique structures in the bulk, thin films, and solution. Giant molecules thus offer a robust platform to manipulate the hierarchical structures via precise and modular assemblies of building blocks in an amplified size level compared with small molecules. It has been found that they are not only scientifically intriguing, but also technologically relevant.

Effect of Chain Architecture on Phase Behavior of Giant Surfactant Constructed from Nanoparticle Monotethered by Single Diblock Copolymer Chain

The phase behaviors of the giant surfactant constructed from a nanoparticle (NP) monotethered by a single AB diblock copolymer chain were investigated by combining self-consistent field theory and density functional theory. Three types of giant surfactants with different chain architectures were constructed via changing the location of NP on the diblock copolymer chain. The simulation results show that the introduction of the NP can induce phase separation of the originally disordered AB diblock copolymers, and phase diagrams as a function of the chain length ratio of A block and the attraction between A block and NP were constructed for the three giant surfactant systems. Via changing the location of NP from the end of B block to the AB-junction point and to the end of A block, the conformational entropies of the systems gradually decrease, leading to a significant difference in phase behaviors. When the NP is tethered to the end of B block, the giant surfactant system has the smallest phase-separation region in the phase diagram, and the resulting ordered structures have the smallest feature sizes. However, when the NP is tethered to the end of A block, the giant surfactant system has the largest phase-separation region, as well as the largest feature sizes of ordered structures. Moreover, the distributions of the NPs within microphase-separated domain can be well tailored by changing the chain length ratio of A block or the attraction between A block and NP in all of the three giant surfactant systems. These findings provide the guideline for the preparation of polymer-nanoparticle composites with controllable morphologies, desirable feature sizes, and precise NP distributions in experiments.

Computer simulation study on the self-assembly of tethered nanoparticles with tunable shapes

We built a tethered nanoparticle (TNP) model that is composed of a nanoparticle with a hydrophobic tethered polymer chain. The shape of the nanoparticle can be tuned from a pure rigid cube to a soft sphere, mimicking the increase of grafting density on the nanocube surfaces. With this model, we study the self-assembly of TNPs in dilute solution using a dissipative particle dynamics simulation technique, and especially focus on the influence of particle shape, tethered chain length, and grafting density on the self-assembly structures. Some intriguing aggregates such as spherical micelles, pearl-necklace-like structures, cubic columnar structures, handshake structures, core–shell–corona micelles, and four-patch micelles have been observed when varying the interactions between cubes and solvents and the lengths of tethered chain. Modifying the nanocube surface with some hydrophilic grafted chains helps the TNPs form small micelles. Increased steric repulsion due to chain overlapping at larger grafting densities results in shape transformation of the nanoparticle from a rigid cube to a soft sphere. In these cases, the self-assembled structures are characterized by the packing of nanoparticles on the micelle surface, and the typical packing mode turns from rectangular (typical for cubes) to hexagonal (typical for spheres).

The self-assembled structures are characterized by the packing of nanoparticles on the micelle surface, and the typical packing mode turns from rectangular (typical for cubes) to hexagonal (typical for spheres).

Effect of Fullerene Volume Fraction on Two-Dimensional Crystal-Constructed Supramolecular Liquid Crystals

The volume fraction plays an important role in phase segregated soft matters. We demonstrate here that at high fullerene volume fraction in soft chain-tethered-fullerene dyads, different two-dimensional (2D) crystal-constructed smectic-like lamella liquid crystalline (LC) phases can be formed with triple-layer (S_T phase) or quadruple-layer (S_Q phase) stacking of fullerenes in 2D crystals. The combination of 2D crystal and LC properties in one system affords these fullerene dyads controlled electron mobility in the range of 10^-5 -10^-3  cm²  V^-1  s^-1 at room temperature (S_T phase), by regulating the insulated soft layer thickness between 2D crystals via the manipulation of fullerene volume fraction.

Dynamic and programmable morphology and size evolution via a living hierarchical self-assembly strategy

Recent advances in the preparation of shape-shifting and size-growing nanostructures are hot topics in development of nanoscience, because many intelligent functions are always relied on their shape and dimension. Here we report a tunable manipulation of sequential self-assembled transformation in situ via a hierarchical assembly strategy based on a living thiol-disulfide exchange reaction. By tailoring the external stimuli, the reactive points can be generated at the ends of initially unimolecular micelles, which subsequently drive the pre-assemblies to periodically proceed into the hierarchically micellar connection, axial growth, bending, and cyclization processes from nanoscopic assemblies to macroscopic particles. Of particular interest would be systems that acquired the shape control and size adjustment of self-assemblies after termination or reactivation of disulfide reshuffling reaction by regulating external stimuli whenever needed. Such a hierarchical strategy for self-assembled evolution is universally applicable not only for other disulfide-linked dendritic polymers but also for exploitation of biological applications.

Supramolecular Kandinsky circles with high antibacterial activity

Nested concentric structures widely exist in nature and designed systems with circles, polygons, polyhedra, and spheres sharing the same center or axis. It still remains challenging to construct discrete nested architecture at (supra)molecular level. Herein, three generations (G2−G4) of giant nested supramolecules, or Kandinsky circles, have been designed and assembled with molecular weight 17,964, 27,713 and 38,352 Da, respectively. In the ligand preparation, consecutive condensation between precursors with primary amines and pyrylium salts is applied to modularize the synthesis. These discrete nested supramolecules are prone to assemble into tubular nanostructures through hierarchical self-assembly. Furthermore, nested supramolecules display high antimicrobial activity against Gram-positive pathogen methicillin-resistant Staphylococcus aureus (MRSA), and negligible toxicity to eukaryotic cells, while the corresponding ligands do not show potent antimicrobial activity.

Nested structures are common throughout nature and art, yet remain challenging synthetic targets in supramolecular chemistry. Here, the authors design multitopic terpyridine ligands that coordinate into nested concentric hexagons, and show that these discrete supramolecules display potent antimicrobial activity.

Formation of Concentric Silica Nanogrooves Guided by the Curved Surface of Silica Particles

The flexible control of nanopatterns by a bottom-up process at the nanometer scale is essential for nanofabrication with a finer pitch. We have previously reported that for the fabrication of linear nanopatterns with sub-5 nm periodicity on Si substrates the outermost surfaces of assembled micelles facing the substrates can be replicated with soluble silicate species generated from the Si substrates under basic conditions. In this study, concentrically arranged nanogrooves with a sub-5 nm periodicity were prepared on Si substrates by replicating the outermost surfaces of bent micelles guided by silica particles. The Si substrates, where silica particles and surfactants films were deposited, were exposed to an NH₃-water vapor mixture. During the vapor treatment, cylindrical micelles became arranged in concentric patterns centered on the silica particles, and their outermost surfaces facing the substrates were replicated by soluble silicate species on the Si substrates. The thinness of the surfactant film on the substrate is crucial for the formation of concentric silica nanogrooves because the out-of-plane orientations of the micelles are suppressed at the interface. Surprisingly, the domains of the concentric silica nanogrooves spread to much larger areas than the maximum cross-sectional areas of the particles, and the size of the domains increased linearly with the radii of the particles. The extension of concentric nanogrooves is discussed on the basis of the orientational elastic energies of the micelles around one silica particle. This study of the formation of bent nanogrooves guided by the outlines of readily deposited nanoscale objects provides a new nanostructure-guiding process.

Supramolecular assembly of platinum-containing polyhedral oligomeric silsesquioxanes: an interplay of intermolecular interactions and a correlation between structural modifications and morphological transformations

A series of alkynylplatinum(ii) terpyridine complexes functionalized with polyhedral oligomeric silsesquioxane (POSS) moieties has been demonstrated to exhibit drastic color changes and give various distinctive nanostructures with interesting multi-stage morphological transformations from spheres to nanoplates in response to solvent conditions through the interplay of various intermolecular interactions, including hydrophilic-hydrophilic, hydrophobic-hydrophobic, Pt···Pt and π-π stacking interactions. These supramolecular architectures can be systematically modified and controlled through the molecular design and the variation of solvent compositions. In particular, drastic changes in color in response to solvent polarity were observed through the incorporation of the charged moieties, representing a new class of potential candidates for functional materials with sensing or imaging capabilities. This class of complexes has been studied by 1H NMR spectroscopy, electron microscopy, UV-vis absorption and emission spectroscopy.

Phase Structure Transition and Properties of Salt-Free Phosphoric Acid/Non-ionic Surfactants in Water

Precise control of phase structure transition for the synthesis of multi-dimensional soft materials is a fascinating target in amphiphilic molecule self-assembly. Here, we demonstrate a spontaneous formation of a closely packed lamellar phase consisting of uni- and multi-lamellar vesicles through the incorporation of a small amount of an extractant, di(2-ethylhexyl)phosphoric acid (DEHPA), into the highly swollen, planar lamellar phase of a non-ionic tetraethylene glycol monododecyl ether (C12EO4) surfactant in water. It is figured out that the introduction of negative membrane charges results in the electrostatic repulsion among the lamellae, which suppresses the Helfrich undulation and induces a phase structure transition from planar lamellae to closely packed vesicles. Our results provide important insight into amphiphilic molecule self-assembly, where additives and pH can satisfy the opportunities for the precise tuning of the lamellar structures, which makes a way for the development of lamellar soft materials.

Nanoparticle-Induced Ellipse-to-Vesicle Morphology Transition of Rod-Coil-Rod Triblock Copolymer Aggregates

Cooperative self-assembly behavior of rod-coil-rod poly(γ-benzyl-l-glutamate)-block-poly(ethylene glycol)-block-poly(γ-benzyl-l-glutamate) (PBLG-b-PEG-b-PBLG) amphiphilic triblock copolymers and hydrophobic gold nanoparticles (AuNPs) was investigated by both experiments and dissipative particle dynamics (DPD) simulations. It was discovered that pure PBLG-b-PEG-b-PBLG copolymers self-assemble into ellipse-like aggregates, and the morphology transforms into vesicles as AuNPs are introduced. When the hydrophobicity of AuNPs is close to that of the copolymers, AuNPs are homogeneously distributed in the vesicle wall. While for the AuNPs with higher hydrophobicity, they are embedded in the vesicle wall as clusters. In addition to the experimental observations, DPD simulations were performed on the self-assembly behavior of triblock copolymer/nanoparticle mixtures. Simulations well reproduced the morphology transition observed in the experiments and provided additional information such as chain packing mode in aggregates. It is deduced that the main reason for the ellipse-to-vesicle transition of the aggregates is attributed to the breakage of ordered and dense packing of PBLG rods in the aggregate core by encapsulating AuNPs. This study deepens our understanding of the self-assembly behavior of rod-coil copolymer/nanoparticle mixtures and provides strategy for designing hybrid polypeptide nanostructures.