A Fluorescent Sensor for Dual-Channel Discrimination between Phosgene and a Nerve-Gas Mimic

A Ratiometric Benzimidazole-Based Fluorescent Probe for The Recognition of Phosgene in Solution and Gaseous Phases

Considering the high toxicity and widespread application of phosgene, there is an urgent need to develop a simple and sensitive method for detecting phosgene. In this work, we designed and synthesized a novel ratiometric fluorescent probe 1 containing fluorophores of benzimidazole and benzothiazole. Probe 1 showed excellent sensitivity (< 30 s) and selectivity (LOD = 3.82 nM) for phosgene and significant ratiometric fluorescence changes. In addition, 1-loaded polystyrene membrane test strips were used to conveniently and efficiently detect phosgene gas (0.5 ppm) via the naked eye and the RGB APP of the smartphone, indicating that this probe has great potential for phosgene detection in the gaseous phase.

BODIPY Based OFF-ON Fluorescent Probe for Endogenous Carbon Monoxide Imaging in Living Cells

Carbon monoxide (CO) is one of the signaling molecules that are ubiquitous in humans, which involves in the regulation of human physiology and pathology. In this work, the probe PEC was designed and synthesized based on BODIPY fluorophore that can selectively detect CO through reducing the nitro group to amino group, resulting in a "turn-on" fluorescence response with a simultaneous increase in the concentration of CO. The response is selective over a variety of relevant reactive free radicals, ions, and amino acid species. PEC has the advantages of good stability, good water solubility, and obvious changes in fluorescence signals. In addition, PEC can be used to detect and track endogenous CO in living cells.

A Pyrene Coupled Azaine-linkage Chromo-fluorogenic Probe for Specific Detection of Sarin Gas Stimulant, Diethylchlorophosphate

Owing to the extreme toxicity and easy synthesis protocol of G-series nerve agents, developing an efficient sensor for selective detection is necessary. Although various traditional methods are utilized to identify these nerve agents, chromo-fluorogenic probes have gained attractive attention from the scientific communities. In the present contribution, we have introduced a new symmetrical aza-substituted chromo-fluorogenic sensor, BPH, for specific detection of sarin gas, one of the fatal G-series nerve agents surrogate, diethylchlorophosphate (DCP). BPH shows a noticeable naked eye colorimetric change from pale yellow to light pink in the presence of DCP, displaying highly intense bright greenish cyan color photoluminosity under a 365 nm UV lamp,which is also manifested from the color chromaticity diagram. A BPH-staining paper stirps-based test kit experiment has been demonstrated for the on-site detection of nerve agent mimics. A more attractive and efficient application of BPH as a sarin gas vapor phase sensor mimics DCP in solid and solution phases. The BPH-based chromo-fluorogenic sensor shows excellent selectivity toward DCP with a detection and quantification limit in the µM range. This report invokes a new way for the researchers to detect DCP employing a simple chromo-fluorogenic sensor, which could be prepared by a time-saving, straightforward, handy protocol from the cost-effective starting materials.

Coherent Modulation of the Aggregation Behavior and Intramolecular Charge Transfer in Small Molecule Probes for Sensitive and Long-term Nerve Agent Monitoring

Aggregation-induced emission (AIE) shows promising performance in chemical sensing relying on the change of the emission behavior of the probe molecule monomers to the aggregated product. However, whether the response contrast could be further boosted by utilizing the emission property of the aggregated probe and the aggregated product remains a big challenge. Here, an exciting AIE probe regulation strategy was proposed by coherently modulating the aggregation behavior and the intramolecular charge transfer (ICT) property of the probes and thus an aggregated-to-aggregated colorimetric-fluorescent dual-mode detection was achieved. The blue emissive film obtained with the optimal AIE probe has been proven to be effective to recognize the vapor of nerve agent analog DCP in air by emitting a sharp green fluorescence. In addition, a porous polymer-based wet sensing chip loaded with the probe enables the immediate response to DCP vapor with a limit of detection (LOD) of 1.7 ppb, and it was further integrated into a wearable watch device for long-term monitoring of DCP vapor up to two weeks. We expect the present probe design strategy would greatly deepen the AIE-based science and provide new insights for long-term monitoring sensors toward trace hazardous substances.

Highly selective and sensitive chromogenic recognition of sarin gas mimicking diethylchlorophosphate

The high-level toxic effects of organophosphate (OP) nerve agents severely threaten national security and public health. Generating trustworthy, accurate methods for quickly identifying these poisonous chemicals is urgently necessary. In this study, we have presented an azine-based colorimetric sensor (HBD) for the highly sensitive and selective identification of poisonous sarin gas surrogate diethylchlorophosphate (DCP). Our introduced sensor shows a purple color in contact with DCP, which is fully reversible upon the addition of triethylamine (TEA). The detection limit of our sensor for the toxic nerve agent mimic DCP is in the μM range. We have fabricated a test kit to verify the capability of HBD for on-the-spot identification of DCP to execute its practical use. To prove that HBD is an effective chemosensor, dip-stick investigation was conducted to detect DCP in the vaporous stage in the presence of different OPs, inorganic phosphates (IPs), and many other deadly analytes. A cellphone-based display method was also undertaken for on-the-spot recognition and measurement of DCP in isolated regions.

A Phenanthroimidazole-Based Luminophore for Selective and Specific Identification of Sarin Simulant, Diethylchlorophosphate

The simplicity of synthesis, significant toxicity of organophosphorus-containing nerve agents, and ease of use of their in-terrorism attacks highlight the necessity to create efficient probes and precise methods for detecting these chemicals. This study developed luminogenic probe 4-(1 H-phenanthrene imidazole-2-yl) benzaldehyde, PB for selectively recognizing lethal chemical sarin mimicking diethylchlorophosphate (DCP) with µM detection limit. Following the addition of DCP to the PB solution, the fluorescence changed from bluish-cyan to green simultaneously; after the insertion of triethylamine (TEA) into the PB-DCP phosphorylated solution, the fluorescence of the original one came back, and it occurred five times. A paper strip-based test kit and dip-stick experiments have been executed to demonstrate the practical applicability of our sensor PB and instant, on-site recognition of the target analyte DCP. An experiment has been investigated using a smartphone and red-green-blue (RGB) color analysis, which offers a novel way for the fast, on-site visual detection and quantification of DCP in actual samples. It also reduces equipment costs, speeds up detection times, and substantially simplifies the operation procedure.

A benzoxazole-triphenylamine conjugated fluorogenic probe for specific detection of sarin gas mimic diethylchlorophosphate

In this study, an excellent chromo-fluorogenic PMPA probe, (E)-4-(((4-(benzoxazole-2-yl)phenyl)imino)methyl)-N,N-diphenylamine, is introduced for the detection of sarin gas mimic diethyl chlorophosphate (DCP) in solution and gaseous phases. On adding DCP into PMPA solution in a pure DMSO and water-DMSO (4 : 1) medium, it exhibits a hypsochromic shift from yellow to colorless and from no fluorescence to highly intense blue-violet photoluminescence via the formation of a phosphorylated PMPA-DCP product due to the inhibition of intramolecular charge transfer (ICT) and photoinduced electron transfer (PET) mechanism. The sensor could detect DCP in the presence of several other notorious guest analytes with a detection limit in the μM range. Moreover, to accomplish the on-spot detection of DCP and explore the practical applicability of the probe, a paper strip-based test kit, "dip-stick" method, and, more interestingly, a real sample analysis was demonstrated in spiked soil samples.

A highly sensitive fluorescence probe for on-site detection of nerve agent mimic diethylchlorophosphonate DCP

Nerve agents are the most toxic chemical warfare agents that pose severe threat to human health and public security. In this work, we developed a novel fluorescent probe NZNN based on naphthylimide and o-phenylenediamine to detect nerve agent mimic diethylchlorophosphonate (DCP). DCP underwent a specific nucleophilic reaction with the o-phenylenediamine group of NZNN to produce a significant fluorescence turn-on response with high selectivity, exceptional linearity, bright fluorescence, rapid response (<6 s) and a low detection limit (30.1 nM). Furthermore, a portable sensing device was fabricated for real-time detection of DCP vapor with excellent performance. This portable and sensitive device is favorable for monitoring environmental pollution and defense against chemical warfare agents.

Potassium xanthate-promoted reductive sulfuration reaction: from aldehydes to thiol, disulfide, and thioester derivatives

Herein, we developed a synthetic strategy for the direct construction of C-S bonds to obtain biologically active sulfur-containing compounds and a methodology involving the reductive sulfuration of aldehydes or ketones to obtain diverse substituted thiol, disulfide, and thioester derivatives. EtOCS2K is demonstrated as a potential substitute for the Berzelius reagent or Lawesson's reagent for the construction of C-S bonds.

Ratiometric Fluorescent Probe for the Detection of Nanomolar Phosgene in Solution and Gaseous Phase: Advancing Crime Detection Applications

Phosgene, an exceptionally hazardous gas, poses a grave concern for the health and safety of the general public. The present study describes a fluorescent ratiometric probe for phosgene employing 2-(naphthalen-2-yl) benzo[d]oxazol-5-amine (NOA) with an amino group as the recognition site. NOA detects phosgene through the intramolecular charge transfer mechanism. The electron-rich amine group of NOA attacks the electrophilic carbonyl group of phosgene, resulting in a quick response within 20 s. NOA demonstrates a low detection limit of 60 nM while maintaining high selectivity and sensitivity toward phosgene. The final product was isolated and verified by nuclear magnetic resonance spectroscopy. The probe can detect phosgene not just quickly in a solution environment but also in its solid state. The probe's applications in fingerprint imaging and bioimaging are also demonstrated.

Highly sensitive and selective detection of triphosgene with a 2-(2'-hydroxyphenyl)benzimidazole derived fluorescent probe

In this work, a 2-(2'-hydroxyphenyl)benzimidazole derived fluorescent probe, 2-(2'-hydroxy-4'-aminophenyl)benzimidazole (4-AHBI), was synthesized and its fluorescent behavior toward triphosgene were evaluated. The results showed that 4-AHBI exhibited high sensitivity (limit of detection, 0.08 nM) and excellent selectivity for triphosgene over other acyl chlorides including phosgene in CH2Cl2 solution. Moreover, 4-AHBI loaded test strips were prepared for the practical sensing of triphosgene.

MOF-Assimilated High-Sensitive Organic Field-Effect Transistors for Rapid Detection of a Chemical Warfare Agent

The selective and rapid detection of trace amounts of highly toxic chemical warfare agents has become imperative for efficiently using military and civilian defense. Metal-organic frameworks (MOFs) are a class of inorganic-organic hybrid porous material that could be potential next-generation toxic gas sensors. However, the growth of a MOF thin film for efficiently utilizing the material properties for fabricating electronic devices has been challenging. Herein, we report a new approach to efficiently integrate MOF as a receptor through diffusion-induced ingress into the grain boundaries of the pentacene semiconducting film in the place of the most adaptive chemical functionalization method for sensor fabrication. We used bilayer conducting channel-based organic field-effect transistors (OFETs) as a sensing platform comprising CPO-27-Ni as the sensing layer, coated on the pentacene layer, showed a strong response toward sensing of diethyl sulfide, which is one of the stimulants of bis (2-chloroethyl) sulfide, a highly toxic sulfur mustard (HD). Using OFET as a sensing platform, these sensors can be a potential candidate for trace amounts of sulfur mustard detection below 10 ppm in real time as wearable devices for onsite uses.

A benzoxazole-based turn-on fluorosensor for rapid and sensitive detection of sarin surrogate, diethylchlorophosphate

A benzoxazole-based fluorosensor (IMP) has been synthesized and employed for the selective and sensitive detection of sarin surrogate, diethylchlorophosphate (DCP) in solution, and gas phase, respectively. Remarkable turn-on fluorescence is observed due to the introduction of DCP in the solution of IMP because of inhibition of the intramolecular charge transfer process and disruption of the excited state intramolecular proton transfer (ESIPT) mechanism. The synthesized IMP-based fluorescence sensor exhibits excellent selectivity, high sensitivity, and a wide linear range of 15-60 μM with a detection limit of 44 nM. Low-intense to highly intensified visible violet color could be seen by the naked eye under a portable 365 nm UV lamp due to the addition of DCP in the solution of IMP. IMP-stained paper strips-based test kit experiment has been demonstrated to detect traces of DCP in stockpiles of related analytes. A dip-stick experiment for the detection of DCP vapor has also been demonstrated. The effectiveness of IMP in detecting DCP established that it might be used as a signal tool for real sample analysis.

An effective fluorescent probe for detection of phosgene based on naphthalimide dyes in liquid and gaseous phases

A fluorescent probe was developed for the detection of phosgene based on 1,8-naphthalimide, of which o-diaminobenzene was used as the recognition moiety. The probe does not fluoresce due to nonradiative decay. The probe reacts rapidly with phosgene via an intramolecular cyclization reaction, which induces large fluorescence due to increased rigidity in the resulting molecule and a low detection limit (0.23 nM). This probe has excellent selectivity for phosgene against competing interference analytes and, in the form of probe-loaded test paper, is an extremely sensitive method for phosgene sensing in the gas phase below 1 ppm concentrations.

A PET and ESIPT-communicated ratiometric, turn-on chromo-fluorogenic sensor for rapid and sensitive detection of sarin gas mimic, diethylchlorophosphate

Fast and precise identification of toxic G-series nerve agents in the solution and vapor phase is urgently needed to save human beings from unwanted wars and terrorist attacks, which is challenging to execute practically. In this article, we have designed and synthesized a sensitive and selective phthalimide-based chromo-fluorogenic sensor, DHAI, by a simple condensation process that shows ratiometric and turns on chromo-fluorogenic behavior towards Sarin gas mimic diethylchlorophosphate (DCP) in liquid and vapor phases, respectively. A colorimetric change, from yellow to colorless, is observed in the DHAI solution due to the introduction of DCP in daylight. A remarkable cyan color photoluminescence enhancement is noticed in the presence of DCP in the DHAI solution, which is observable to the naked under a portable 365 nm UV lamp. The mechanistic aspects of the detection of DCP by employing DHAI have been revealed by time-resolved photoluminescence decay analysis and ¹H NMR titration investigation. Our probe DHAI exhibits linear photoluminescence enhancement from 0 to 500 μM with a detection limit of nanomolar range from non-aqueous to semi-aqueous media. For practical utility, a DHAI-stained test kit employing Whatman-41 filter paper has been fabricated and used as a portable and displayable photonic device for on-site detection of Sarin gas surrogate, DCP. Also, a dip-stick experiment has been demonstrated to identify the vapor of Sarin gas mimics DCP colorimetrically and fluorometrically. The concentrations of DCP in various water samples have been evaluated with the help of a standard fluorescence curve for real sample analysis.

Visual and Rapid Detection of Nerve Agent Mimics in Gas and Solution Phase by a Simple Fluorescent Probe

Chemical nerve agents are highly toxic organophosphorus compounds that are easy to obtain and can be utilized by terrorists to threaten homeland security and human safety. Those organophosphorus nerve agents contain nucleophilic ability that can react with acetylcholinesterase leading to muscular paralysis and human death. Therefore, there is great importance to explore a reliable and simple method to detect chemical nerve agents. Herein, the o-phenylenediamine-linked dansyl chloride as a colorimetric and fluorescent probe has been prepared to detect specific chemical nerve agent stimulants in the solution and vapor phase. The o-phenylenediamine unit serves as a detection site that can react with diethyl chlorophosphate (DCP) in a rapid response within 2 min. A satisfied relationship line was obtained between fluorescent intensity and the concentration of DCP in the range of 0-90 μM. In the optimized conditions, we conducted the fluorescent titration to measure the limits of detection (0.082 μM) with the fluorescent enhancement up to 18-fold. Fluorescence titration and NMR studies were also conducted to explore the detection mechanism, indicating that the formation of phosphate ester causes the intensity of fluorescent change during the PET process. Finally, probe 1 coated with the paper test is utilized to detect DCP vapor and solution by the naked eye. We expect that this probe may give some admiration to design the small molecule organic probe and applied in the selectivity detection of chemical nerve agents.

Fluorescent probes for the detection of chemical warfare agents

Chemical warfare agents (CWAs) are toxic chemicals that have been intentionally developed for targeted and deadly use on humans. Although intended for military targets, the use of CWAs more often than not results in mass civilian casualties. To prevent further atrocities from occurring during conflicts, a global ban was implemented through the chemical weapons convention, with the aim of eliminating the development, stockpiling, and use of CWAs. Unfortunately, because of their relatively low cost, ease of manufacture and effectiveness on mass populations, CWAs still exist in today's world. CWAs have been used in several recent terrorist-related incidents and conflicts (e.g., Syria). Therefore, they continue to remain serious threats to public health and safety and to global peace and stability. Analytical methods that can accurately detect CWAs are essential to global security measures and for forensic analysis. Small molecule fluorescent probes have emerged as attractive chemical tools for CWA detection, due to their simplicity, ease of use, excellent selectivity and high sensitivity, as well as their ability to be translated into handheld devices. This includes the ability to non-invasively image CWA distribution within living systems (in vitro and in vivo) to permit in-depth evaluation of their biological interactions and allow potential identification of therapeutic countermeasures. In this review, we provide an overview of the various reported fluorescent probes that have been designed for the detection of CWAs. The mechanism for CWA detection, change in optical output and application for each fluorescent probe are described in detail. The limitations and challenges of currently developed fluorescent probes are discussed providing insight into the future development of this research area. We hope the information provided in this review will give readers a clear understanding of how to design a fluorescent probe for the detection of a specific CWA. We anticipate that this will advance our security systems and provide new tools for environmental and toxicology monitoring.

Recent advances in fluorescent and colorimetric chemosensors for the detection of chemical warfare agents: a legacy of the 21st century

Chemical warfare agents (CWAs) are among the most prominent threats to the human population, our peace, and social stability. Therefore, their detection and quantification are of utmost importance to ensure the security and protection of mankind. In recent years, significant developments have been made in supramolecular chemistry, analytical chemistry, and molecular sensors, which have improved our capability to detect CWAs. Fluorescent and colorimetric chemosensors are attractive tools that allow the selective, sensitive, cheap, portable, and real-time analysis of the potential presence of CWAs, where suitable combinations of selective recognition and transduction can be integrated. In this review, we provide a detailed discussion on recently reported molecular sensors with a specific focus on the sensing of each class of CWAs such as nerve agents, blister agents, blood agents, and other toxicants. We will also discuss the current technology used by military forces, and these discussions will include the type of instrumentation and established protocols. Finally, we will conclude this review with our outlook on the limitations and challenges in the area and summarize the potential of promising avenues for this field.

Bifunctional Fluorescent Probes for the Detection of Mustard Gas and Phosgene

Mustard gas [sulfur mustard (SM)] and phosgene are the most frequently used chemical warfare agents (CWAs), which pose a serious threat to human health and national security, and their rapid and accurate detection is essential to respond to terrorist attacks and industrial accidents. Herein, we developed a fluorescent probe with o-hydroxythioketone as two sensing sites, AQso, which can detect and distinguish mustard gas and phosgene. The dual-sensing-site probe AQso reacts with mustard gas to form a cyclic product with high sensitivity [limit of detection (LOD) = 70 nM] and is highly selective to SM over phosgene, SM analogues, active alkylhalides, acylhalides, and nerve agent mimics, in ethanol solutions. When encountering phosgene, AQso rapidly converts to cyclic carbonate, which is sensitive (LOD = 14 nM) and highly selective. Their sensing mechanisms of AQso to mustard gas and phosgene were well demonstrated by separation and characterization of the sensing products. Furthermore, a facile test strip with the probe was prepared to distinguish 2-chloroethyl ethyl sulfide (CEES) and phosgene in the gas phase by different fluorescence colors and response rates. Not using the complicated instrument, the qualitative and quantitative detection of CEES or phosgene can be achieved only by measuring the red-green-blue (RGB) channel intensity of the test strip after being exposed to CEES or phosgene gas by the smartphone with an RGB color application.

Fluorimetric Recognition of Nerve Agent Mimic Diethylchlorophosphate Along with Cu2+/Hg2+ Ions Using Imidazole Possessing Sensor

An imidazole possessing sensor (1) has been designed and developed by simple one step reaction and characterization was done by using common spectroscopic methods. The fluorimetric sensing of nerve agent mimic, DCP, was carried out by observing blue shift in spectra accompanied with quenching in semi-aqueous solvent. The sensor was found proficient for the detection of DCP amongst other phosphates with detection limit of 69 nM. Furthermore, upon incorporation of various metal ions to CH₃CN:H₂O (4:1, v/v) solution of 1 (λ_ex 340 nm), the fluorescent probe turned non-fluorescent only in presence of Cu²⁺/Hg²⁺ ions. This was accompanied by fluorescent color change from light blue to yellow in case of Hg²⁺ and colorless in case of Cu²⁺ ions. Moreover, practical applications of sensor 1 were investigated for recognition of Cu²⁺ and Hg²⁺ ions in real water samples along with the detection of DCP in soil samples from different areas. Differential emission changes observed with addition of Hg²⁺ ions and DCP led to observation of "NOR" and an "INHIBIT" molecular photonic logic operations at 446 and 385 nm, respectively.

Ion-in-Conjugation: A Promising Concept for Multifunctional Organic Semiconductors

Most organic semiconductors (OSCs) consist of conjugated skeletons with flexible peripheral chains. Their weak intermolecular interactions from dispersion and induction forces result in environmental susceptibilities and are unsuitable for many multifunctional applications where direct exposure to external environments is unavoidable, such as gas absorption, chemical sensing, and catalysis. To exploit the advantages of inorganic semiconductors in OSCs, ion-in-conjugation (IIC) materials are proposed. An IIC material refers to any conjugated material (molecules, polymers, and crystals) in Kekule's structural formula containing stoichiometric ionic states in its conjugated backbone in the electronic ground state. In this review, the definitions, structures, synthesis, properties, and applications of IIC materials are described briefly. Four types of IIC material, including zwitterionic conjugated molecules/polymers, conjugated ionic dyes, π-d conjugated molecules and polymers, and coordinatively doped polymers, are reported. Their applications in gas sensing, humidity sensing, resistive memory devices, and thermal/photo-/electro-catalysis are demonstrated. The challenges and opportunities for future research are also discussed. It is expected that this work will inspire the design of new organic electronic information materials.

Rapid and ratiometric fluorescent detection of phosgene by a red-emissive ESIPT-based-benzoquinolone probe

Phosgene is a highly toxic gas that poses a serious threat to human health and public safety. Therefore, it is of great importance to develop an available detection method enabling on-the-spot measurement of phosgene. In this paper, we report a novel ESIPT fluorescent probe for phosgene detection based on quinolone fluorophore. This probe exhibits rapid response (in 10 s), stable signal output (last for 10 min), high sensitivity (LOD ∼ 6.7 nM), and distinct emission color change (red to green) towards phosgene. The sensing mechanism was investigated by using ¹H NMR, HRMS and fluorescence lifetime techniques, confirming that the amidation reaction between phosgene and quinolone effectively suppressed the ESIPT process of probe. Eventually, this probe was fabricated into polymer nanofibers by electrospinning and successfully employed to monitor gaseous phosgene with high specificity. This work provided a promising analytical tool for rapid and ratiometric detection of phosgene both in solution and in the gas phase.

Europium (III) complex-based fluorescent probe for instantaneous, selective, and sensitive detection of phosgene

Phosgene (carbonyl chloride, COCl₂) is a widely used colorless gas in organic synthesis. However, its high toxicity sets a severe potential damage of public safety. As the fluorescence method has the advantages of simple operation and real-time detection of phosgene, it is extremely important to develop a fluorescent phosgene probe for public health and safety. This study aimed to present a simple Eu³⁺ complex (1) with 2-hydroxyl-1H-benzimidazole moiety as a novel phosgene probe. Probe 1 exhibited characteristic emission of Eu³⁺ in CH₃CN solution, which was specifically quenched after encountering phosgene. The change in the solution color from light red to dark could be easily distinguished with the naked eye under a 365 nm ultraviolet lamp. Finally, the test paper with probe 1 was fabricated for effortless, selective, and visual detection of phosgene gas.

A Rapid, Highly Sensitive and Selective Phosgene Sensor Based on 5,6-Pinenepyridine

The toxicity of phosgene (COCl₂ ) combined with its extensive use as a reactant and building block in the chemical industry make its fast and accurate detection a prerequisite. We have developed a carboxylic derivative of 5,6-pinenepyridine which is able to act as colorimetric and fluorimetric sensor for phosgene in air and solution. For the first time, the formation of a pyrido-[2,1-a]isoindolone was used for this purpose. In solution, the sensing reaction is extremely fast (under 5 s), selective and highly sensitive, with a limit of detection (LOD) of 9.7 nM/0.8 ppb. When fixed on a solid support, the sensor is able to detect the presence of gaseous phosgene down to concentrations of 0.1 ppm, one of the lowest values reported to date.

Controllable synthesis of conjugated microporous polymer films for ultrasensitive detection of chemical warfare agents

Nerve agents, one of the most toxic chemical warfare agents, seriously threaten human life and public security. The high toxicity of nerve agents makes the development of fluorescence sensors with suitable limit of detection challenging. Here, we propose a sensor design based on a conjugated microporous polymer film for the detection of diethyl chlorophosphate, a substitute of Sarin, with low detection limit of 2.5 ppt. This is due to the synergy of the susceptible on-off effect of hybridization and de-hybridization of hybrid local and charge transfer (HLCT) materials and the microporous structure of CMP films facilitating the inward diffusion of DCP vapors, and the extended π-conjugated structure. This strategy provides a new idea for the future development of gas sensors. In addition, a portable sensor is successfully integrated based on TCzP-CMP films that enables wireless, remote, ultrasensitive, and real-time detection of DCP vapors.

Rapid detection of nerve agents in environmental and biological samples using a fluorescent probe

Nerve agents are highly toxic chemical warfare agents that are easy to synthesize and have recently been applied many times in local wars and terrorist attacks. Fluorescent probes have been widely used in life science and medical research due to their features of short reaction time, high sensitivity and good selectivity. Herein, two fluorescent compounds, NMU-1 and NMU-2, were synthesized for the selective detection of nerve agents. NMU-1 exhibited good detection performance for nerve agents. With increasing nerve agent concentration, the fluorescence signal of NMU-1 at 498 nm gradually decreased with an excellent linear relationship. NMU-1 exhibited a low LOD (4.6 μM for DCP and 8.41 μM for soman), a rapid response (less than 3 min) and a large Stokes shift (98 nm) along with obvious color changes. Due to its high sensitivity and good selectivity, NMU-1 was successfully applied to image nerve agents in living PC12 cells. Furthermore, NMU-1 was used as a key element to develop chemical warfare agent test paper, which exhibited significant fluorescent changes under hand-held 365-nm UV light upon contact with nerve agents.

A dual-channel chemodosimetric sensor for discrimination between hypochlorite and nerve-agent mimic DCP: application on human breast cancer cells

A styryl bridge containing a triphenylamine-thioimidazole hydrazine-based dual-analyte-responsive fluorescent sensor was designed and synthesized for the detection of the nerve gas simulant diethyl chlorophosphate (DCP) and hypochlorite (OCl^-) for the first time. Hypochlorite induces oxidative intramolecular cyclization to give a triazole structure, which exhibited blue fluorescence with excellent selectivity and a low detection limit (8.05 × 10^-7 M) in solution. Conversely, the probe forms a phosphorylated intermediate with diethyl chlorophosphate, which undergoes further hydrolyzation and presents green fluorescence in a ratiometric mode with a low detection limit (3.56 × 10^-8 M). Additionally, the as-designed sensor was utilized to construct a portable kit for real-time monitoring of DCP in a discriminatory, simple and safe manner. Lastly, the probe was also productively employed for in situ imaging of OCl^- and DCP in the living cell.

BODIPY-based fluorescent chemosensor for phosgene detection: confocal imaging of nasal mucosa and lung samples from mouse exposed to phosgene

The improper use of phosgene, either as a chemical warfare agent or a leak during chemical production, causes significant risks to human life and property. Therefore, it is particularly important to develop a rapid and highly selective method for the detection of phosgene. In this article, a highly selective fluorescent sensor ONB with a BODIPY unit as a fluorophore and o-aminophenol as a reactive site was constructed for the selective and rapid detection of phosgene in solution. The ONB-containing nanofibers were sprayed onto a non-woven fabric by electrostatic spinning and cut into test films, which can be used well for the detection of gaseous phosgene. While, there were no reported bio-imaging applications for phosgene detection. In this work, nasal mucosa and lung samples from the mice exposed to gaseous phosgene after dropping the ONB solution through the nasal cavity achieved bio-imaging applications successfully.

Thiocarbonyl photosensitizer, a feasible way to eliminate the photosensitizer residues in photodynamic therapy

Photodynamic therapy (PDT) has been successfully applied in clinical treatment several years. However, after finished treatment process the residual photosensitizer will spread throughout body, which forces patients stay in the dark room to avoid exposure in sunlight several weeks. Therefore, develop degradable photosensitizer could effectively eliminate this inconvenience. In the past, researchers have developed degradable photosensitizers based on supramolecular structure. In this study, we achieved the same effect in small molecule level. Three thiocarbonyl photosensitizers (PS) have high photogenerated ¹O₂ quantum yield and can be photodegraded by laser irradiation within 15 min. And due to its high phototoxicity and low toxicity, thiocarbonyl PS still maintains its high phototoxicity. Especially, mitochondrial targeting PS 1a has better properties than many BODIPY or cyanine heavy-atom-free photosensitizers. It only needs 1 μM to reduce HeLa cell activity to 30%. Finally the thiocarbonyl PS provided a convenient way to solve the PS residue problem without sacrificing PDT efficiency.

A naphthimide-based ratiometric fluorescent probe for selective and visual detection of phosgene in solution and the gas phase

As a colorless, highly toxic and widely used chemical reagent, phosgene poses a potentially serious threat to public health and environmental safety. Therefore, there is an urgent need to develop a simple and sensitive method for detecting phosgene. In this work, a ratiometric fluorescent probe (NED) for phosgene was developed by utilizing 4-substituted 1,8-naphthimide unit as the fluorophore and ethylenediamine as the recognition moiety. The probe NED undergoes intramolecular cyclization reaction with phosgene, resulting in a remarkable ratiometric fluorescence response. The probe NED displays high sensitivity (LOD = 4.9 nM), excellent ratiometric fluorescence signal, and high selectivity toward phosgene over other relevant analytes. In addition, paper test strip capable of visually detecting gaseous phosgene has also been fabricated.

A Double-Site Chemodosimeter for Selective Fluorescence Detection of a Nerve Agent Mimic

A novel two-site chemodosimeter (SWJT-4) based on fluorescein skeleton to detect diethyl chlorophosphate (DCP) was designed and synthesized. It is a turn-on fluorescent probe for DCP with good selectivity and obvious color change in aqueous solution. Interestingly, the two oxime groups of SWJT-4 as dual response sites initiated different reactions with DCP to form a cyano group and an isoxazole ring, respectively. The corresponding mechanism was confirmed by 1H NMR, MS and DFT calculation. Moreover, SWJT-4 could be used as a fluorescent test paper to detect DCP vapor.

A molecular recognition platform for the simultaneous sensing of diverse chemical weapons

Chemical warfare agents (CWAs) such as phosgene and nerve agents pose serious threats to our lives and public security, but no tools can simultaneously screen multiple CWAs in seconds. Here, we rationally designed a robust sensing platform based on 8-cyclohexanyldiamino-BODIPY (BODIPY-DCH) to monitor diverse CWAs in different emission channels. Trans-cyclohexanyldiamine as the reactive site provides optimal geometry and high reactivity, allowing trans-BODIPY-DCH to detect CWAs with a quick response and high sensitivity, while cis-BODIPY-DCH has much weaker reactivity to CWAs due to intramolecular H-bonding. Upon reaction with phosgene, trans-BODIPY-DCH was rapidly converted to imidazolone BODIPY (<3 s), triggering green fluorescence with good sensitivity (LOD = 0.52 nM). trans-BODIPY-DCH coupled with nerve agent mimics, affording a blue fluorescent 8-amino-BODIPY tautomer. Furthermore, a portable test kit using trans-BODIPY-DCH displayed an instant response and low detection limits for multiple CWAs. This platform enables rapid and highly sensitive visual screening of various CWAs.

Chemical warfare agents (CWAs) such as phosgene and nerve agents pose serious threats to our lives and public security, necessitating tools that can simultaneously screen multiple CWAs in seconds.

Ruthenium(II) Polypyridine Complex-Based Aggregation-Induced Emission Luminogen for Rapid and Selective Detection of Phosgene in Solution and in the Gas Phase

A bis-heteroleptic ruthenium(II) complex, Ru-1, of 4,7-bis(2-aminoethylamino)-1,10-phenanthroline for selective "turn-on" detection of highly toxic chemical warfare agent phosgene is presented. Probe Ru-1 exhibits aggregation-induced emission (AIE), and the restricted intramolecular motion is responsible for the AIE activity. In a CHCl₃/CH₃CN [95:5 (v/v)] solvent mixture, a unique self-assembled vesicular structure was formed after aggregation, which was supported by transmission electron microscopy, field emission scanning electron microscopy, and atmoic force microscopy studies. Probe Ru-1 showed a rapid and highly selective luminescence turn-on response for phosgene over other competitive chemical warfare agents with a low detection limit (13.9 nM) in CH₃CN. The 2-aminoethylamino groups in Ru-1 act as a reacting site for nucleophilic addition to the carbonyl center of phosgene and undergo intramolecular cyclization. The final product of the phosgene-mediated reaction, Ru-1-Phos, contains 2-imidazolidinone groups, which has been confirmed by electrospray ionization mass spectometry and ¹H nuclear magnetic resonance (NMR) spectroscopy. ¹H NMR titration of Ru-1 with phosgene supported the reaction mechanism and also pointed to the simultaneous reaction of phosgene at two 2-aminoethylamino sites. For the first time, the crystal structure of the phosgene reaction product, Ru-1-Phos, containing the cyclized 2-imidazolidinone group was confirmed by single-crystal X-ray diffraction, which indubitably validates the reaction mechanism. Triplet state time-dependent density functional theory calculations showed that the weak luminescence of Ru-1 was mostly due to the population of the non-emissive ³MC state. The cyclization reaction with phosgene and the corresponding 2-imidazolidinone product formation populated the emissive ³MLCT state in Ru-1-Phos and is the key reason for the enhanced luminescence. Furthermore, a low-cost portable test paper strip has been fabricated with Ru-1 for the real-time selective monitoring of phosgene gas at the nanomolar level.

Utilization of Pharmaceutical Technology Methods for the Development of Innovative Porous Metasilicate Pellets with a Very High Specific Surface Area for Chemical Warfare Agents Detection

Pharmaceutical technology offers various dosage forms that can be applied interdisciplinary. One of them are spherical pellets which could be utilized as a carrier in emerging second-generation detection tubes. This detection system requires carriers with high specific surface area (SSA), which should allow better adsorption of toxic substances and detection reagents. In this study, a magnesium aluminometasilicate with high SSA was utilized along with various concentrations of volatile substances (menthol, camphor and ammonium bicarbonate) to increase further the carrier SSA after their sublimation. The samples were evaluated in terms of physicochemical parameters, their morphology was assessed by scanning electron microscopy, and the Brunauer–Emmett–Teller (BET) method was utilized to measure SSA. The samples were then impregnated with a detection reagent o-phenylenediamine-pyronine and tested with diphosgene. Only samples prepared using menthol or camphor were found to show red fluorescence under the UV light in addition to the eye-visible red-violet color. This allowed the detection of diphosgene/phosgene at a concentration of only 0.1 mg/m³ in the air for samples M20.0 and C20.0 with their SSA higher than 115 m²/g, thus exceeding the sensitivity of the first-generation DT-12 detection tube.

Do amino acid functionalization stratagems on carbonaceous quantum dots imply multiple applications? A comprehensive review

Amino acids are the noteworthy entity among biological molecules with diverse properties such as zwitterionic and amphoteric. Functionalizing carbon-based quantum dots using amino acids might be used for the extreme enhancement of electronic and optical properties of quantum dots and improve the performance of the resultant amino acid-functionalized quantum dots. The amino acid-functionalized quantum dots are highly soluble, sustainable, and biocompatible with virtuous optical and electrical performance, which makes them potential and suitable candidates for fabricating optoelectronic devices. The tenacity of using amino acids as functional groups to functionalize quantum dots and their novel properties are conferred to attain their multiple applications. The goal of this review is to provide the choices of amino acids based on the desired applications and a variety of functionalization techniques to make them a noteworthy material for future applications. The method of one-step and two-step functionalization strategies along with the properties of the resultant functionalized quantum dots and their plausible applications and future scope of the material are highlighted. Amidation is the basic principle behind the functionalization of quantum dots with amino acids. This review would be an exciting prospect to explore the pathways of the possible applications in different domains, in which the amino acid-functionalized quantum dots have not yet been explored. Further, this review article helps in pitching a variety of prominent applications right from sensors to energy storage systems either using the optical property or electronic property of amino acid-functionalized quantum dots.

Ultrafast-response, highly-sensitive and recyclable colorimetric/fluorometric dual-channel chemical warfare agent probes

In this paper, two donor (D)-acceptor (A) type of small organic fluorescent molecules (T1 and T2) based on terpyridine group are synthesized, characterized and used as colorimetric/fluorometric dual-channel probes towards diethylchlorophosphate (DCP, the mimic of chemical warfare agent sarin) not only in solution but also in gas phase featuring instantaneous responses, excellent recyclability, high selectivity and sensitivity. Interestingly though the discriminated units of both chemosensors are terpyridine, their fluorescent responded signals are different, which is due to the different electron-donating substituents of T1 and T2 caused the different responded mechanism to DCP. And the possible sensing mechanism was proved by using nuclear magnetic resonance (¹H NMR, ³¹P NMR) spectra and natural transition orbitals calculations. Furthermore, facile testing filter paper-constructed strips with the visualization of colorimetric/fluorometric dual-channel responses based on T1 and T2 have been fabricated for real-time, on-site high selective and sensitive, recyclable monitor of DCP vapor.

Organic-Molecule-Based Fluorescent Chemosensor for Nerve Agents and Organophosphorus Pesticides

Organophosphorus (OP) compounds are typically a broad class of compounds that possess various uses such as insecticides, pesticides, etc. One of the most evil utilizations of these compounds is as chemical warfare agents, which pose a greater threat than biological weapons because of their ease of access. OP compounds are highly toxic compounds that cause irreversible inhibition of enzyme acetylcholinesterase, which is essential for hydrolysis of neurotransmitter acetylcholine, leading to series of neurological disorders and even death. Due to the extensive use of these organophosphorus compounds in agriculture, there is an increase in the environmental burden of these toxic chemicals, with severe environmental consequences. Hence, the rapid and sensitive, selective, real-time detection of OP compounds is very much required in terms of environmental protection, health, and survival. Several techniques have been developed over a few decades to easily detect them, but still, numerous challenges and problems remain to be solved. Major advancement has been observed in the development of sensors using the spectroscopic technique over recent years because of the advantages offered over other techniques, which we focus on in the presented review.

Fluorescence umpolung enables light-up sensing of N-acetyltransferases and nerve agents

Intramolecular charge transfer (ICT) is a fundamental mechanism that enables the development of numerous fluorophores and probes for bioimaging and sensing. However, the electron-withdrawing targets (EWTs)-induced fluorescence quenching is a long-standing and unsolved issue in ICT fluorophores, and significantly limits the widespread applicability. Here we report a simple and generalizable structural-modification for completely overturning the intramolecular rotation driving energy, and thus fully reversing the ICT fluorophores' quenching mode into light-up mode. Specifically, the insertion of an indazole unit into ICT scaffold can fully amplify the intramolecular rotation in donor-indazole-π-acceptor fluorophores (fluorescence OFF), whereas efficiently suppressing the rotation in their EWT-substituted system (fluorescence ON). This molecular strategy is generalizable, yielding a palette of chromophores with fluorescence umpolung that spans visible and near-infrared range. This strategy expands the bio-analytical toolboxes and allows exploiting ICT fluorophores for light-up sensing of EWTs including N-acetyltransferases and nerve agents.

Two birds with one stone: The detection of nerve agents and AChE activity with an ICT-ESIPT-based fluorescence sensor

Nerve agents are among the world's deadliest poisons, and the target enzyme is acetylcholinesterase (AChE). To better diagnosis nerve agent poisonings, a reliable diagnostic method for both nerve agents and AChE is desirable. Herein, we synthesized a series of fluorescent sensors for both real nerve agents and acetylcholinesterase activity detection. Among these sensors, HBQ-AE exhibited a fast response rate (within 10 s for nerve agent and 8 min for AChE), good sensitivity (the limit of detection is 6 nM and 0.2 U/mL) and a high off/on contrast. To the best of our knowledge, HBQ-AE is the first fluorescence sensor for nerve agents and AChE activity detection. The fluorescent change of HBQ-AE from nonfluorescence to blue fluorescence (nerve agent) or orange fluorescence (AChE) by excitation at 365 nm can be easily observed with the naked eye. HBQ-AE was successfully applied to image nerve agents and AChE activity in living cells. Moreover, HBQ-AE is the vital member to construct a test paper that can be employed to detect and diagnose chemical warfare agents.

Two-phase activated colorimetric and ratiometric fluorescent sensor for visual detection of phosgene via AIE coupled TICT processes

In this paper, we specifically designed and synthesized an excellent colorimetric and ratiometric fluorescent sensor DPA-CI for rapid and convenient detection of the highly toxic phosgene. DPA-CI was developed by incorporated a diphenylamine (DPA) and a 2-imine-3-benzo[d]imidazole as the enhanced push-pull electronic structure into the coumarin fluorophore matrix. The sensor DPA-CI towards phosgene sensing exhibited both visible colorimetric and ratiometric fluorescent color change in solution and in gaseous conditions with TICT and AIE mechanism respectively, which can be easily distinguished by using the naked eye. Also, the sensor DPA-CI showed splendid sensing performance such as excellent selectivity, rapid response (less than 8 s in THF and 2 min in gaseous condition), and fair sensitivity (limit of detection less than 0.11 ppm in gaseous condition and 0.27 μM in solution). The design strategy based on enhanced push-pull electronic structure with AIE and TICT properties will be helpful to construct a solid optical sensor with excellent potential application prospects for portable and visual sensing of gaseous phosgene through distinct color and ratiometric fluorescence change by the naked eyes.