Encapsulating Palladium Nanoparticles Inside Mesoporous MFI Zeolite Nanocrystals for Shape-Selective Catalysis

Preparation of Metal-Supported Nanostructured Zeolite Catalysts and their Applications in the Upgrading of Biomass-Derived Furans: Advances and Prospects

The development of platform chemicals derived from biomass, in particular, 5-hydroxymethylfurfural (5-HMF) and furfural (FUR), is of crucial importance in biorefinery. Over the past decades, metal-supported nanostructured zeolites, in particular, metal-supported hierarchically porous zeolites or metal-encapsulated zeolites, have been extensively elaborated because of their multiple functionalities and superior properties, for example, shape-selectivity, (hydro)thermal stability, tunable acidity and basicity, redox properties, improved diffusion, and intimacy of multiple active sites. In this review, the effects of such properties of metal-supported nanostructured zeolites on the enhanced catalytic performances in furanic compound upgrading are discussed. In addition, the recent rational design of metal-supported nanostructured zeolites is exemplified. Consequently, the ongoing challenges for further developing metal-supported nanostructured zeolites-based catalysts and their applications in HMF and FUR upgrading are identified.

Co-Cu nanoparticles uniformly embedded in the intra-crystalline mesoporous Silicalite-1 for catalytic ammonia borane hydrolysis

Zeolite-encaged metal nanoparticles (NPs) catalysts are emerging as a new frontier owing to their superior ability to stabilize the structure and catalytic performance in the thermal and environmental catalytic reaction. However, the pore size below 2 nm of the conventional zeolites usually limits the accessibility of metal active sites. Herein, Co-Cu NPs of about 2.5-3.5 nm were uniformly encapsulated in the intracrystalline mesoporous Silicalite-1 (S-1) through alkali-treatment ligand-assisted strategy. The obtained sample (termed CoxCu1-x@HS-1) exhibited efficient activity and stability in the ammonia borane hydrolysis with the highest TOF value of 21.46 molH2·molMe-1·min-1. UV-vis DRS spectra indicated that intracrystalline mesopores have greatly improved the openness and accessibility of the active sites, thus improving their catalytic performance. The introduction of Cu regulates the electronic properties of Co, further increasing hydrogen production activity. This research creates new prospects to design other high-performance hierarchical porous zeolite-confined metal/metal oxide catalysts.

Dynamic configurations of metallic atoms in the liquid state for selective propylene synthesis

The use of liquid gallium as a solvent for catalytic reactions has enabled access to well-dispersed metal atoms configurations, leading to unique catalytic phenomena, including activation of neighbouring liquid atoms and mobility-induced activity enhancement. To gain mechanistic insights into liquid metal catalysts, here we introduce a GaSn0.029Ni0.023 liquid alloy for selective propylene synthesis from decane. Owing to their mobility, dispersed atoms in a Ga matrix generate configurations where interfacial Sn and Ni atoms allow for critical alignments of reactants and intermediates. Computational modelling, corroborated by experimental analyses, suggests a particular reaction mechanism by which Sn protrudes from the interface and an adjacent Ni, below the interfacial layer, aligns precisely with a decane molecule, facilitating propylene production. We then apply this reaction pathway to canola oil, attaining a propylene selectivity of ~94.5%. Our results offer a mechanistic interpretation of liquid metal catalysts with an eye to potential practical applications of this technology.

Ion-Sieve-Confined Synthesis of Size-Tunable Ru for Electrochemical Hydrogen Evolution

The controllable and low-cost synthesis of nanometal particles is highly desired in scientific and industrial research. Herein, size-tunable Ru nanoparticles were synthesized by using a novel ion-sieve-confined reduction method. The H2TiO3 ion-sieve was used to adsorb Ru3+ into the hydroxyl-enriched porous [TiO3]2- layers. The confined environment of the interlayer space facilitates Ru-Ru collision and bonding during annealing, achieving a precise reduction from Ru3+ to Ru0 without additional reductants. Owing to the confinement effect, Ru0 nanoparticles are uniformly embedded in the pores on the surface of the postannealed TiO2 matrix (Ru@TiO2). Ru@TiO2 exhibited a lower overpotential than Pt/C (57 vs 87 mV at 10 mA cm-2) for the HER in 0.1 M KOH solution. The confinement-induced reduction of metal ions was also preliminarily proved in ion-exchanged zeolites, which provides facile and abundant approaches for the size-controllable synthesis of nanometal catalysts with high catalytic activity.

In Situ Synthesis of Encapsulated Pd@silicalite-2 for Highly Stable Methane Catalytic Combustion

Methane emissions from vehicles have made a significant contribution to the greenhouse effect, primarily due to its high global warming potential. Supported noble metal catalysts are widely employed in catalytic combustion of methane in vehicles, but they still face challenges such as inadequate low-temperature activity and deactivation due to sintering under harsh operating conditions. In the present work, a series of encapsulated structured catalysts with palladium nanoparticles confined in hydrophobic silicalite-2 were prepared by an in situ synthesis method. Based on various characterization methods, including XRD, HR-TEM, XPS, H2-TPR, O2-TPD, H2O-TPD, CH4-TPR, Raman, and in situ DRIFTS-MS, it was confirmed that PdOx nanoparticles were mainly encapsulated inside the silicalite-2 zeolite, which further maintained the stability of the nanoparticles under harsh conditions. Specifically, the 3Pd@S-2 sample exhibited high catalytic activity for methane oxidation even after harsh hydrothermal aging at 750 °C for 16 h and maintained long-term stability at 400 °C for 130 h during wet methane combustion. In situ Raman spectroscopy has confirmed that PdOx species act as active species for methane oxidation. During this reaction, methane reacts with PdOx to produce CO2 and H2O, while simultaneously reducing PdOx to metallic Pd species, which is further reoxidized by oxygen to replenish the PdOx catalyst.

Principle on Selecting the Coordination Ligands of Palladium Precursors Encapsulated by Zeolite for an Efficient Purification of Formaldehyde at Ambient Temperature

High-performance zeolite-supported noble metal catalysts with low loading and high dispersion of active components are the most promising materials for achieving the complete oxidation of formaldehyde (HCHO) at room temperature. In this work, palladium nanoparticles (Pd NPs) with different sizes were successfully encapsulated inside the silicalite-1 (S-1) zeolite framework by using diverse stabling ligands via the one-pot method. Thereafter, the rule on selecting the coordinative ligands for palladium was clarified: more N atoms, a short carbon chain, a smaller branch chain, and bidentate coordination are characteristics of an ideal ligand. Accordingly, the best-performing 0.2Pd@S-1(Ethylenediamine) catalyst exhibited outstanding performance for HCHO oxidation, achieving 100% conversion even at room temperature. High-resolution high-angle annular dark-field scanning transmission electron microscopy (HR HAADF-STEM) and density functional theory (DFT) calculations indicate that the chelate is formed by complexation of Pd2+ ions with ethylenediamine, displaying the smallest spatial site resistance simultaneously with the zeolite synthesis, resulting in Pd located mostly within the 5-membered ring (5-MR) channels of S-1 after calcination, thus limiting the growth of Pd clusters and promoting their dispersion.

Embedded Mo/Mn Atomic Regulation for Durable Acidity-Reinforced HZSM-5 Catalyst toward Energy-Efficient Amine Regeneration

Metal-molecular sieve composites with high acidity are promising solid acid catalysts (SACs) for accelerating sluggish CO2 desorption processes and reducing the energy consumption of CO2 chemisorption systems. However, the production of such SACs through conventional approaches such as loading or ion-exchange methods often leads to uncontrolled and unstable metal distribution on the catalysts, which limits their pore structure regulation and catalytic performance. In this study, we demonstrated a feasible strategy for improving the durability, surface chemical activity, and pore structure of metal-doped HZSM-5 through bimetallic Mo/Mn modification. This strategy involves the immobilization of Mo-O-Mn species confined in an MFI structure by regulating MoO42- anions and Mn2+ cations. The embedded Mn/Mo species of low valence can strongly induce electron transfer and increase the density of compensatory H+ on the MoMn@H catalyst, thereby reducing the CO2 desorption temperature by 8.27 °C and energy consumption by 37% in comparison to a blank. The durability enhancement and activity regulation method used in this study is expected to advance the rational synthesis of metal-molecular sieve composites for energy-efficient CO2 capture using amine regeneration technology.

Molecular Diffusion in Nanoreactors' Pore Channel System: Measurement Techniques, Structural Regulation, and Catalytic Effects

Nanoreactors, as a new class of materials with highly enriched and ordered pore channel structures, can achieve special catalytic effects by precisely identifying and controlling the molecular diffusion behavior within the ordered pore channel system. Nanoreactors-driven molecular diffusion within the ordered pore channels can be highly dependent on the local microenvironment in the nanoreactors' pore channel system. Although the diffusion process of molecules within the ordered pore channels of nanoreactors is crucial for the regulation of catalytic behaviors, it has not yet been as clearly elucidated as it deserves to be in this study. In this review, fundamental theory and measurement techniques for molecular diffusion in the pore channel system of nanoreactors are presented, structural regulation strategies of pore channel parameters for controlling molecular diffusion are discussed, and the effects of molecular diffusion in the pore channel system on catalytic reactivity and selectivity are further analyzed. This article attempts to further develop the underlying theory of molecular diffusion within the theoretical framework of nanoreactor-driven catalysis, and the proposed perspectives may contribute to the rational design of advanced catalytic materials and the precise control of complex catalytic kinetics.

Encapsulating Metal Nanoparticles into a Layered Zeolite Precursor with Surface Silanol Nests Enhances Sintering Resistance

Supported metal nanoparticles are used as heterogeneous catalysts but often deactivated due to sintering at high temperatures. Confining metal species into a porous matrix reduces sintering, yet supports rarely provide additional stabilization. Here, we used the silanol-rich layered zeolite IPC-1P to stabilize ultra-small Rh nanoparticles. By adjusting the IPC-1P interlayer space through swelling, we prepared various architectures, including microporous and disordered mesoporous. In situ scanning transmission electron microscopy confirmed that Rh nanoparticles are resistant to sintering at high temperature (750 °C, 6 hrs). Rh clusters strongly bind to surface silanol quadruplets at IPC-1P layers by hydrogen transfer to clusters, while high silanol density hinders their migration based on density functional theory calculations. Ultimately, combining swelling with long-chain surfactant and utilizing metal-silanol interactions resulted in a novel, catalytically active material-Rh@IPC_C22.

Surface Charge-Directed Efficient and Selective Catalytic Activities of Porous M@UiO-66 Composites (M = Pt or Ag) for Reduction of Organic Pollutants

Precisely constructed porous composites containing catalytically active nanoparticles can stabilize unstable nanoparticles, thus improving catalytic activity and longevity while preventing agglomeration of active nanoparticles. Herein, we report the confined incorporation of highly active metal nanoparticles within a metal-organic framework support and efficient catalytic performances in the reduction of organic pollutants, such as methylene blue (MB) and 4-nitrophenol (4-NP). UiO-66-based porous composites (M@UiO-66, M = Pt or Ag) containing well-dispersed metal nanoparticles are constructed via the one-step thermal treatment of UiO-66 implanted with metal ions (UiO-66/Mⁿ⁺, Mⁿ⁺ = Pt²⁺ or Ag⁺). The comprehensive features of M@UiO-66s, such as well-dispersed nanocatalysts, well-developed pores, and characteristic surface charges, expedite not only efficient but also selective catalytic activities in the reduction of MB or 4-NP, along with impressive recyclability.

Metal Sites in Zeolites: Synthesis, Characterization, and Catalysis

Zeolites with ordered microporous systems, distinct framework topologies, good spatial nanoconfinement effects, and superior (hydro)thermal stability are an ideal scaffold for planting diverse active metal species, including single sites, clusters, and nanoparticles in the framework and framework-associated sites and extra-framework positions, thus affording the metal-in-zeolite catalysts outstanding activity, unique shape selectivity, and enhanced stability and recyclability in the processes of Brønsted acid-, Lewis acid-, and extra-framework metal-catalyzed reactions. Especially, thanks to the advances in zeolite synthesis and characterization techniques in recent years, zeolite-confined extra-framework metal catalysts (denoted as metal@zeolite composites) have experienced rapid development in heterogeneous catalysis, owing to the combination of the merits of both active metal sites and zeolite intrinsic properties. In this review, we will present the recent developments of synthesis strategies for incorporating and tailoring of active metal sites in zeolites and advanced characterization techniques for identification of the location, distribution, and coordination environment of metal species in zeolites. Furthermore, the catalytic applications of metal-in-zeolite catalysts are demonstrated, with an emphasis on the metal@zeolite composites in hydrogenation, dehydrogenation, and oxidation reactions. Finally, we point out the current challenges and future perspectives on precise synthesis, atomic level identification, and practical application of the metal-in-zeolite catalyst system.

Solid-State Reaction Synthesis of Nanoscale Materials: Strategies and Applications

Nanomaterials (NMs) with unique structures and compositions can give rise to exotic physicochemical properties and applications. Despite the advancement in solution-based methods, scalable access to a wide range of crystal phases and intricate compositions is still challenging. Solid-state reaction (SSR) syntheses have high potential owing to their flexibility toward multielemental phases under feasibly high temperatures and solvent-free conditions as well as their scalability and simplicity. Controlling the nanoscale features through SSRs demands a strategic nanospace-confinement approach due to the risk of heat-induced reshaping and sintering. Here, we describe advanced SSR strategies for NM synthesis, focusing on mechanistic insights, novel nanoscale phenomena, and underlying principles using a series of examples under different categories. After introducing the history of classical SSRs, key theories, and definitions central to the topic, we categorize various modern SSR strategies based on the surrounding solid-state media used for nanostructure growth, conversion, and migration under nanospace or dimensional confinement. This comprehensive review will advance the quest for new materials design, synthesis, and applications.

Amorphous-to-Crystalline Transformation: General Synthesis of Hollow Structured Covalent Organic Frameworks with High Crystallinity

Morphological control of covalent organic frameworks (COFs) is particularly interesting to boost their applications; however, it remains a grand challenge to prepare hollow structured COFs (HCOFs) with high crystallinity and uniform morphology. Herein, we report a versatile and efficient strategy of amorphous-to-crystalline transformation for the general and controllable fabrication of highly crystalline HCOFs. These HCOFs exhibited ultrahigh surface areas, radially oriented nanopore channels, quite uniform morphologies, and tunable particle sizes. Mechanistic studies revealed that H₂O, acetic acid, and solvent played a crucial role in manipulating the hollowing process and crystallization process by regulating the dynamic imine exchange reaction. Our approach was demonstrated to be applicable to various amines and aldehydes, producing up to 10 kinds of HCOFs. Importantly, based on this methodology, we even constructed a library of unprecedented HCOFs including HCOFs with different pore structures, bowl-like HCOFs, cross-wrinkled COF nanocapsules, grain-assembled HCOFs, and hydrangea-like HCOFs. This strategy was also successfully applied to the fabrication of COF-based yolk-shell nanostructures with various functional interior cores. Furthermore, catalytically active metal nanoparticles were implanted into the hollow cavities of HCOFs with tunable pore diameters, forming attractive size-selective nanoreactors. The obtained metal@HCOFs catalysts showed enhanced catalytic activity and outstanding size-selectivity in hydrogenation of nitroarenes. This work highlights the significance of nucleation-growth kinetics of COFs in tuning their morphologies, structures, and applications.

Structure engineering of alveoli-like ZSM-5 with encapsulated Pt nanoparticles for the enhanced benzene oxidation

Inspired by the alveolar configuration, an alveoli-like ZSM-5 and the corresponding platinum encapsulated nanocomposite (Pt@PZ5) were fabricated via a dual-template method and a controlled selective desilication-recrystallization strategy. The dimensions of the central cavity, interconnected zeolitic vesicles, and mesoporous shell could be tuned by adjusting the synthesis parameters, as verified by scanning electron microscopy, transmission electron microscopy, nitrogen physisorption investigations, X-ray photoelectron spectroscopy, and X-ray diffraction techniques. Thanks to these properties and merits, the alveoli-like Pt@PZ5 showed the highest catalytic performance with excellent stability, obtaining 100% benzene conversion at 180 °C. Adsorption experiments combined with a finite-element simulation study uncovered that the alveolar architecture could expedite the accumulation of reactants and boost mass transfer; the conversion of intermediates in the voids could be further facilitated, giving optimal catalytic performance. Additionally, the alveolar architecture is resistant to metal sintering (5-20 nm) and leaching, even after calcination at 850 °C for 360 min. This work provides an alveolar concept into the rational design of efficient catalysts for fundamental catalytic action.

The mechanism of MOF as the heterogeneous catalyst for propene hydroformylation: The DFT study

Metal-organic framework which was composed of metal center and organic linkers possessing the similar structure with the homogeneous metal-complex catalyst for hydroformylation, thus it could be potentially used as the...

Mesoporosity-Enabled Selectivity of Mesoporous Palladium-Based Nanocrystals Catalysts in Semihydrogenation of Alkynes

We reported mesoporosity engineering as a general strategy to promote semihydrogenation selectivity of palladium (Pd)-based nanobundles catalysts. The best mesoporous PdP displayed full conversion, remarkable activity, excellent selectivity, and high stability in semihydrogenation of 1-phenyl-1-propyne, all of which are remarkably better than commercial Lindlar catalysts. Mechanistic investigations ascribed high semihydrogenation selectivity to continuous crystalline framework and penetrated mesoporous channel of catalysts that weakened the adsorption and interaction capacity of alkenes and thus inhibited over-hydrogenation of alkenes to industrially unfavorable alkanes. Density functional theory calculations further demonstrated that convex crystalline mesoporosity of nanobundles catalysts electronically optimized the coordination environment of Pd active sites and energetically changed hydrogenation trends, resulting in a superior semihydrogenation selectivity to targeted alkenes.

Advances in Catalytic Applications of Zeolite-Supported Metal Catalysts

Zeolites possessing large specific surface areas, ordered micropores, and adjustable acidity/basicity have emerged as ideal supports to immobilize metal species with small sizes and high dispersities. In recent years, the zeolite-supported metal catalysts have been widely used in diverse catalytic processes, showing excellent activity, superior thermal/hydrothermal stability, and unique shape-selectivity. In this review, a comprehensive summary of the state-of-the-art achievements in catalytic applications of zeolite-supported metal catalysts are presented for important heterogeneous catalytic processes in the last five years, mainly including 1) the hydrogenation reactions (e.g., CO/CO₂ hydrogenation, hydrogenation of unsaturated compounds, and hydrogenation of nitrogenous compounds); 2) dehydrogenation reactions (e.g., alkane dehydrogenation and dehydrogenation of chemical hydrogen storage materials); 3) oxidation reactions (e.g., CO oxidation, methane oxidation, and alkene epoxidation); and 4) other reactions (e.g., hydroisomerization reaction and selective catalytic reduction of NO_x with ammonia reaction). Finally, some current limitations and future perspectives on the challenge and opportunity for this subject are pointed out. It is believed that this review will inspire more innovative research on the synthesis and catalysis of zeolite-supported metal catalysts and promote their future developments to meet the emerging demands for practical applications.

Construction of Inverse Metal-Zeolite Interfaces via Area-Selective Atomic Layer Deposition

The spatial confinement at metal-zeolite interfaces offers a powerful knob to steer the selectivity of chemical reactions on metal catalysts. However, encapsulating metal catalysts into small-pore zeolites remains a challenging task. Here, we demonstrate an inverse design of metal-zeolite interfaces, "metal-on-zeolite," constructed by area-selective atomic layer deposition. This inverse design bypasses the intrinsic synthetic issues associated with metal encapsulation, offering a potential solution for the fabrication of task-specific metal-zeolite interfaces for desired catalytic applications. Infrared spectroscopy and several probe reactions confirmed the spatial confinement effects at the inverse metal-zeolite interfaces.

Novel Recyclable Pd/H-MOR Catalyst for Suzuki-Miyaura Coupling and Application in the Synthesis of Crizotinib

In this paper, we report an effective ultrasound method for the synthesis of Pd/H-MOR, which was used as a catalyst in the Suzuki-Miyaura coupling of aryl halides with phenylboronic acid. The structure and morphology of the as-prepared catalysts were fully characterized by X-ray diffraction (XRD), N2 sorption isotherms, scanning electron microscopy (SEM), and an inductively coupled plasma-atomic emission spectrometer (ICP-AES). The advantages of Pd/H-MOR in the coupling reaction are green solvents, high yields, absence of ligands, and recyclability. The catalysts were easily reused at least ten times without significant deterioration in catalytic activity. In addition, this protocol was used in the marketed anti-tumor drug crizotinib synthesis.

Template Guiding for the Encapsulation of Uniformly Subnanometric Platinum Clusters in Beta-Zeolites Enabling High Catalytic Activity and Stability

Subnanometric metal clusters have attracted extensive attention because of their unique properties as heterogeneous catalysts. However, it is challenging to obtain uniformly distributed metal clusters under synthesis and reaction conditions. Herein, we report a template-guidance protocol to synthesize subnanometric metal clusters uniformly encapsulated in beta-zeolite, with the metal ions anchored to the internal channels of the zeolite template via electrostatic interactions. Pt metal clusters with a narrow size range of 0.89 to 1.22 nm have been obtained on the intersectional sites of beta-zeolite (Pt@beta) with a broad range of Si/Al molar ratios (15-200). The uniformly distributed Pt clusters in Pt@H-beta are subject to strong electron withdrawal by the zeolite, which promotes transfer of active hydrogen, providing excellent activity and stability in hydrodeoxygenation reactions. A general strategy is thus proposed for the encapsulation of subnanometric metal clusters in zeolites with high thermal stability.

Atomic-Scale Designing of Zeolite Based Catalysts by Atomic Layer Deposition

Zeolite-supported catalysts have been widely used in the field of heterogeneous catalysis. Atomic-scale governing the metal or acid sites on zeolites still encounters great challenge in controllable synthesis and developing of novel catalysts. Atomic layer deposition (ALD), owing to its unique character of self-limiting surface reactions, becomes one of the most promising and controllable strategies to tailor the metallic deposition sites in atomic scale precisely. In this review, we present a comprehensive summary and viewpoint of recent research in designing and engineering the structural of zeolite-based catalysts via ALD method. A prior focus is laid on the deposition of metals on the zeolites with emphasis on the isolated states of metals, followed by introducing the selected metals into channels of zeolites associates with identifying the location of metals in and/or out of the channels. Subsequently, detailed analysis of tailoring the acid sites of different zeolites is provided. Assisted synthesis of zeolite and the regioselective deposition of metal on special sites to modify the structures of zeolites are also critically discussed. We further summarize the challenges of ALD with respect to engineering the active sites in heterogeneous zeolite-based catalysts and provide the perspectives on the development in this field.

Recent Advances in Catalytic Confinement Effect within Micro/Meso-Porous Crystalline Materials

Micro/meso-porous crystalline materials with a well-defined pore structure, such as zeolites, carbon nanotubes, and metal-organic frameworks, are of great significance in the development of catalytic systems for scientific and industrial demands. The confinement effect aroused by pore features of porous crystalline materials has triggered great interest in heterogeneous catalysis. Catalytic reactions in confined spaces exhibit unique behaviors compared to those observed on bulk materials. More interestingly, chemical reactivity can be modulated in different ways by the confinement effect, despite the fact that the mechanism on how the confinement effect changes the reaction remains unclear. In this review, a systematic discussion and fundamental understanding is provided concerning the concept of confinement effect, highlighting the impact of confinement effects on diffusion, adsorption/desorption, and catalytic reaction in typical micro/meso-porous crystalline materials, including zeolites, carbon nanotubes, and metal-organic frameworks. Relevant studies demonstrate that confinement effect affords not only shape selectivity against reactants/products, but also modulates surface electron distribution of active species confined within porous environments, thereby successively affecting the catalytic reactivity, selectivity, and stability. This review provides a useful guide for researchers attempting to design excellent porous crystalline catalysts based on the concept of confinement effect in heterogeneous catalysis.

Zeolite Fixed Metal Nanoparticles: New Perspective in Catalysis

ConspectusLoading metal nanoparticles on the surface of solid supports has emerged as an efficient route for the preparation of heterogeneous catalysts. Notably, most of these supported metal nanoparticles still have shortcomings such as dissatisfactory activity and low product selectivity in catalysis. In addition, these metal nanoparticles also suffer from deactivation because of nanoparticle sintering, leaching, and coke formation under harsh conditions. The fixation of metal nanoparticles within zeolite crystals should have advantages of high activities for metal nanoparticles and excellent shape selectivity for zeolite micropores as well as extraordinary stability of metal nanoparticles immobilized with a stable zeolite framework, which is a good solution for the shortcomings of supported metal nanoparticles.Materials with metal nanostructures within the zeolite crystals are normally denoted as metal@zeolite, where the metal nanoparticles with diameters similar to those of industrial catalysts are usually larger than the micropore size. These metal nanoparticles are enveloped with the zeolite rigid framework to prevent migration under harsh reaction conditions, which is described as a fixed structure. The zeolite micropores allow the diffusion of reactants to the metal nanoparticles. As a result, metal@zeolite catalysts combine the features of both metal nanoparticles (high activity) and zeolites (shape selectivity and thermal stability), compared with the supported metal nanoparticles.In this Account, we describe how the zeolite micropore and metal nanoparticle synergistically work to improve the catalytic performance by the preparation of a variety of metal@zeolite catalysts. Multiple functions of zeolites with respect to the metal nanoparticles are highlighted, including control of the reactant/product diffusion in the micropores, the adjustment of reactant adsorption on the metal nanoparticles, and sieving the reactants and products with zeolite micropores. Furthermore, by optimizing the wettability of the zeolite external surface, the zeolite crystals could form a nanoreactor to efficiently enrich the crucial intermediates, thus boosting the performance in low-temperature methane oxidation. Also, the microporous confinement weakens the adsorption of C₁ intermediates on the metal sites, accelerating the C-C coupling to improve C₂ oxygenate productivity in syngas conversion. In particular, the zeolite framework efficiently stabilizes the metal nanoparticles against sintering and leaching to give durable catalysts. Clearly, this strategy not only guides the rational design of efficient heterogeneous catalysts for potential applications in a variety of industrial chemical reactions but also accelerates the fundamental understanding of the catalytic mechanisms by providing new model catalysts.

Incorporation of Active Metal Species in Crystalline Porous Materials for Highly Efficient Synergetic Catalysis

The design and development of efficient catalytic materials with synergistic catalytic sites always has long been known to be a thrilling and very dynamic research field. Crystalline porous materials (CPMs) mainly including metal-organic frameworks and zeolites with high scientific and industrial impact have recently been the subject of extensive research due to their essential role in modern chemical industrial processes. The rational incorporation of guest species in CPMs can synergize the respective strengths of these components and allow them to collaborate with each other for synergistic catalysis, leading to enhanced catalytic activity, selectivity, and stability in a broad range of catalytic processes. In this review, the recent advances in the development of CPMs-confined active metal species, including metal nanoparticles, metal/metal oxides heteroparticles, metal oxide, subnanometric metal clusters, and polyoxometalates, for heterogeneous catalysis, with a particular focus on synergistic effects between active components that result in an enhanced performance are highlighted. Insights into catalysts design strategies, host-guest interactions, and structure-property relationships have been illustrated in detail. Finally, the existing challenges and possible development directions in CPMs-based encapsulation-structured synergistic catalysts are discussed.

Library Creation of Ultrasmall Multi-metallic Nanoparticles Confined in Mesoporous MFI Zeolites

The development of materials integrated with ultrasmall multi-metal nanoparticles (UMMNs) and mesoporous zeolite is a considerable challenge in chemistry and materials science. We designed a trifunctional surfactant, in which the pyridyl benzimidazole in the hydrophobic tail generates the mesopores through π-π stacking; the diquaternary ammonium in the hydrophilic headgroup direct the formation of MFI zeolite sheets and the nitrogen atoms in the heterocyclic rings coordinate with various metal ions to form UMMNs confined in the zeolite matrix after calcination and reduction. A library of 56 UMMNs confined within both micropores and mesopores of MFI zeolites (MMZs) with 4 mono-, 14 bi- and 38 tri-metallic nanoparticles (sizes of 1.3-4.7 nm) of combinations of Rh, Pd, Pt, Au, Fe, Co, Ni, Cu and Zn were made. An improved catalytic performance was exhibited in the sequence of Rh-MMZ<Rh/Pt-MMZ<Rh/Pt/Ni-MMZ for the mild oxidation of methane to methanol or liquid acid.

Impregnating Subnanometer Metallic Nanocatalysts into Self-Pillared Zeolite Nanosheets

Impregnation is the most commonly used approach to prepare supported metal catalysts in industry. However, this method suffers from the formation of large metal particles with uneven dispersion, poor thermal stability, and thus unsatisfied catalytic performance. Here, we demonstrate that the self-pillared MFI zeolite (silicalite-1 and ZSM-5) nanosheets with larger surface area and abundant Si-OH groups are ideal supports to immobilize ultrasmall monometallic (e.g., Rh and Ru) and various bimetallic clusters via simple incipient wetness impregnation method. The loaded subnanometric metal clusters are uniformly dispersed within sinusoidal five-membered rings of MFI and remain stable at high temperatures. The Rh/SP-S-1 is highly efficient in ammonia borane (AB) hydrolysis, showing a TOF value of 430 mol_H2 mol_Rh^-1 min^-1 at 298 K, which is more than 6-fold improvement over that of nanosized zeolite-supported Rh catalyst and even comparable with that of zeolite-supported Rh single-atom catalyst. Because of the synergistic effect between bimetallic Rh-Ru clusters and zeolite acidity, the H₂ generation rate from AB hydrolysis over Rh_0.8Ru_0.2/SP-ZSM-5-100 reaches up to 1006 mol_H2 mol_metal^-1 min^-1 at 298 K, and also shows record activities in cascade hydrogenation of various nitroarenes by coupling with the hydrolysis of AB. This work demonstrates that zeolite nanosheets are excellent supports to anchor diverse ultrasmall metallic species via the simple impregnation method, and the obtained nanocatalysts can be applied in various industrially important catalytic reactions.

Boosting free radical type photocatalysis over Pd/Fe-MOFs by coordination structure engineering

The development of novel heterogeneous photocatalytic systems, along with a deep understanding of the relationship between the catalytic center chemical environment and the catalytic performance, is of great significance.

Controlled Nanostructure of Zeolite Crystal Encapsulating FeMnK Catalysts Targeting Light Olefins from Syngas

Light olefins (C₂⁼-C₄⁼) are important basic raw materials in chemical industries. Direct production of light olefins from syngas using zeolite encapsulation catalysts shows great potential due to their regulation of product distribution in the Fischer-Tropsch process. Herein, we report a series of silicalite-1 zeolite-encapsulated FeMnK catalysts with distinct nanostructures, including FeMnK@S-1, FeMnK@Hol-S-1, and FeMnK@HM-S-1. It was found that the FeMnK@HM-S-1 catalyst (encapsulation of FeMnK oxide in hollow mesoporous silicalite-1 crystal) had an enhanced C₂⁼-C₄⁼ selectivity of 49% at a CO conversion of 12%. Our results revealed that superior light olefins selectivity of the FeMnK@HM-S-1 catalyst was achieved by the synergic effect between the inherent silicalite-1 micropores and the hollow mesoporous structure, which is responsible for restricting heavy hydrocarbon (C₅⁺) formation, maximizing C₂-C₄ hydrocarbons selectivity, quickly removing the primary light olefin products, and increasing the O/P ratio. We demonstrated that the enhanced CO adsorption and the declined H₂ adsorption (lower [H*]/[C*] ratio) over the FeMnK@HM-S-1 catalyst could also facilitate the olefin synthesis. This work provides guidance for reasonable designing of F-T catalysts to tailor product selectivity.

Effective synthesis of zeolite-encapsulated Ni nanoparticles with excellent catalytic performance for hydrogenation of CO2 to CH4

A simple and effective "synchronous exchange deposition" method was developed, for the first time, for the synthesis of an encapsulation of Ni nanoparticles uniformly distributed in X-zeolite (Ni@NaX). The short-range joint effects of the Ni nanoparticles and the 3D negatively charged grid of the X-zeolite endowed Ni@NaX with an excellent catalytic performance for the hydrogenation of CO2 to CH4.

Metal@Zeolite Hybrid Materials for Catalysis

The fixation of metal nanoparticles into zeolite crystals has emerged as a new series of heterogeneous catalysts, giving performances that steadily outperform the generally supported catalysts in many important reactions. In this outlook, we define different noble metal-in-zeolite structures (metal@zeolite) according to the size of the nanoparticles and their relative location to the micropores. The metal species within the micropores and those larger than the micropores are denoted as encapsulated and fixed structures, respectively. The development in the strategies for the construction of metal@zeolite hybrid materials is briefly summarized in this work, where the rational preparation and improved thermal stability of the metal nanostructures are particularly mentioned. More importantly, these metal@zeolite hybrid materials as catalysts exhibit excellent shape selectivity. Finally, we review the current challenges and future perspectives for these metal@zeolite catalysts.

Metal Nanoparticles Confined within an Inorganic-Organic Framework Enable Superior Substrate-Selective Catalysis

The search for catalysts with a perfect substrate selectivity toward the hydrogenation of nitroarenes is a goal of high importance, which still remains a significant challenge. Here, we designed a new type of catalyst with superior substrate selectivity by combining a space-confined effect and a hydrogen-bonding network, in which metal nanoparticles (MNPs) were confined in hierarchical hollow silica (HHS) with a poly(N-isopropylacrylamide) (PNIPA) coating. Given the strong induced properties of hydrogen-bond donors and acceptors in the HHS support and PNIPA coating, the as-synthesized catalyst would achieve perfect substrate selectivity for the hydrogenation of various nitroarenes and their mixture by thoroughly impeding the reduction of nitroarenes with any hydroxyl or carboxyl groups, which is typically very difficult to be realized over almost all of the reported supported-metal catalysts. Notably, the hydrogenation of nitroarenes can produce almost quantitative yields of anilines over the as-synthesized catalyst. Furthermore, density functional theory and experimental evidence are also provided for the hierarchical structure of HHS and PNIPA coating associated with substrates to demonstrate how a substrate could have access or be blocked into the confined active centers (MNPs). Therefore, this work would open a new window to design efficient catalysts for a wide variety of substrate-selective catalyses.

Supported Palladium Nanocatalysts: Recent Findings in Hydrogenation Reactions

Catalysis has witnessed a dramatic increase on the use of metallic nanoparticles in the last decade, opening endless opportunities in a wide range of research areas. As one of the most investigated catalysts in organic synthesis, palladium finds numerous applications being of significant relevance in industrial hydrogenation reactions. The immobilization of Pd nanoparticles in porous solid supports offers great advantages in heterogeneous catalysis, allowing control of the major factors that influence activity and selectivity. The present review deals with recent developments in the preparation and applications of immobilized Pd nanoparticles on solid supports as catalysts for hydrogenation reactions, aiming to give an insight on the key factors that contribute to enhanced activity and selectivity. The application of mesoporous silicas, carbonaceous materials, zeolites, and metal organic frameworks (MOFs) as supports for palladium nanoparticles is addressed.