Poly(ionic liquid)-Mediated Morphogenesis of Bismuth Sulfide with a Tunable Band Gap and Enhanced Electrocatalytic Properties

Synergistic effect of a bamboo-like Bi2S3 covered Sm2O3 nanocomposite (Bi2S3-Sm2O3) for enhanced alkaline OER

The availability of hydrogen energy from water splitting through the electrocatalytic route is strongly dependent on the efficiency, durability, and cost of the electrocatalysts. Herein, a novel Bi2S3-covered Sm2O3 (Bi2S3-Sm2O3) nanocomposite electrocatalyst was developed by a hydrothermal route for the oxygen evolution reaction (OER). The electrochemical properties were studied in 1.00 mol KOH solution after coating the target material on the stainless-steel substrate (SS). Physical analysis via XRD, FTIR, IV, TEM/EDX, and XPS revealed that the Bi2S3-Sm2O3 composite possesses metallic surface states, thereby displaying unconventional electron dynamics and purity of phases. The Bi2S3-Sm2O3 composite shows outstanding OER activity with a low overpotential of 197 mV and a Tafel slope of 74 mV dec-1 at a 10 mA cm-2 current density as compared to pure Bi2S3 and Sm2O3. Meanwhile, the composite catalyst retains high stability even after 100 h of the chronoamperometry test. Thus, this work unveils a new avenue for the speedy flow of electrons, which is attributed to the synergetic effect between Bi2S3 and Sm2O3, as well as enriched interfacial defects, which exhibit greater oxygen adsorption capability with improved electronic assemblies in the active interfacial region. In addition, the introduced porous structure in core-shell Bi2S3-Sm2O3 provides extraordinary electrical properties. Thus, this article offers a realistic framework for electrochemical energy generation.

Controlled synthesis of photoresponsive bismuthinite (Bi2S3) nanostructures mediated through a new 1D bismuth-pyrimidylthiolate coordination polymer as a molecular precursor

Bismuthinite (Bi2S3) nanostructures have garnered significant interest due to their appealing photoresponsivity which has positioned them as an attractive choice for energy conversion applications. However, to utilize their full potential, a simple and economically viable method of preparation is highly desirable. Herein, we present the synthesis and characterization including structural elucidation of a new air- and moisture-stable bismuth-pyrimidylthiolate complex. This complex serves as an efficient single-source molecular precursor for the facile preparation of phase-pure Bi2S3 nanostructures. Powder X-ray diffraction (PXRD), Raman spectroscopy, electron dispersive spectroscopy (EDS) and electron microscopy techniques were used to assess the crystal structure, phase purity, elemental composition and morphology of the as-prepared nanostructures. This study also revealed the profound effects of temperature and growth duration on the crystallinity, phase formation and morphology of nanostructures. The optical band gap of the nanostructures was tuned within the range of 1.9-2.3 eV, which is blue shifted with respect to the bulk bandgap and suitable for photovoltaic applications. Liquid junction photo-electrochemical cells fabricated from the as-prepared Bi2S3 nanostructure exhibit efficient photoresponsivity and good photo-stability, which project them as promising candidates for alternative low-cost photon absorber materials.

Metal-Organic Framework-Derived Homologous Sulfide Heterojunction for Robust Enzyme-Like Self-Driven Bacteria-Killing through Enhanced Electron Transfer

Infectious diseases caused by various bacteria pose a serious threat to human health, and the emergence of drug-resistant bacteria has forced humans to develop new and effective antimicrobial agents and strategies. Herein, a metal-organic framework-derived Bi₂ S₃ /FeS₂ heterojunction (BFS) is synthesized, and the materials-microorganism interface is further constructed. Through interfacial electron transfer, electrons are transferred from the bacteria to the BFS surface, disrupting the balance of the bacterial electron transport chain and inhibiting the metabolic activity of the bacteria. Moreover, BFS has enzyme-like (oxidase and peroxidase) properties and can produce a large amount of reactive oxygen species to kill additional bacteria. In vitro antibacterial results show that the antibacterial efficiency of BFS against both Staphylococcus aureus and Escherichia coli reaches more than 99.9% after 4 h of co-culture under dark conditions. Meanwhile, in vivo experiments show that BFS can effectively kill bacteria and promote wound healing. This work shows that BFS could be a novel, effective nanomaterial for the treatment of bacterial infections by constructing the materials-microorganism interface.

Trisodium citrate as a modulation additive to increase the cycling capability of a Bi2S3 cathode in a zinc-ion battery

3D Bi₂S₃ materials were prepared by the trisodium citrate (Na₃Cit)-assisted solvothermal method and applied to aqueous zinc ion batteries (AZIBs) to explore the effect of the electrode material morphology on the electrochemical performance. As the concentration of Na₃Cit increases, the 3D assembly morphology evolves from coral-like to sphere-like to snowflake-like structures. The electrochemical test results show that the electrode materials of various morphologies possess excellent cycle life, but the specific capacity varies greatly depending on the morphology. Impressively, the Bi₂S₃-1.2 electrode has the best electrochemical performance, with a capacity of 203.5 mA h g^-1 after 4000 charge/discharge cycles at 0.5 A g^-1. Furthermore, the Bi₂S₃-1.2 electrode delivers an ultralong lifetime of over 10 000 cycles with a capacity of 150.2 mA h g^-1 at 1 A g^-1. This work demonstrates a feasible route to prepare ultra-long cycle life AZIBs.

γ-CuI from ionic liquid/poly(ionic liquid)s precursors with controllable morphologies and improved photocatalytic performance

γ-phase copper(I) iodide (abbreviated to CuI hereafter) with different morphologies is realized through a one-step redox process from I-containing ionic liquid (IL) or poly(ionic liquid)s (PILs) precursors at room temperature. The phase composition, morphology, and electronic states of the synthesized CuI samples are characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), and X-ray photoelectron spectroscopy (XPS). The resulting CuI products exhibit three different types of morphologies, namely nanocrystals, with an average size of 0.8 ± 0.2 μm, nanoplates, with a thickness of 35.8 ± 0.9 nm, and nanoflowers, with petals with a thickness of 12.2 ± 0.8 nm. Moreover, the as-synthesized CuI samples exhibit gradually diminishing bandgaps and improved photocatalysis performance for the photodegradation of rhodamine B (RhB) under visible light irradiation as the thickness decreases. XPS measurements confirm that IL/PILs coupled to the CuI surface, resulting in a further charge transfer between Cu and I. These results conclusively prove that IL/PILs serve as both the reducing agents and assemble as orientation templates in the formation of the CuI nanostructures, and also successfully mediate the functional properties of the samples by changing the surface electronic structures.

Hybrid Perovskite/Polymer Materials: Preparation and Physicochemical Properties

The aim of this work is to investigate the preparation, the optical properties, and the stability over time of a colloidal organic–inorganic hybrid perovskite (CH3NH3PbBr3)/random copolymer P(MMA-co-DMAEMA) system. Different ratios of perovskite to copolymer were used to study its effect on stability and properties. The optical properties were investigated by UV-Vis and fluorescence spectroscopy. Dynamic light scattering was used to determine the size, and the size polydispersity of the colloidal hybrid particles; while morphology was investigated by transmission electron microscopy. Photoluminescence decay studies revealed the interaction of the random copolymer with the perovskite. Finally, thin-films were prepared, to investigate the optical properties of the samples in the absence of the solvent. High temporal stability of the optical properties of thin hybrid films was observed under certain conditions.

Selective Electrochemical Sensing Platform Based on the Synergy between Carbon Black and Single-Crystalline Bismuth Sulfide for Rapid Analysis of Antipyretic Drugs

Nanomaterials are of significant interest in acetaminophen (APAP) detection in pharmaceutical samples. Herein, a carbon black/single-crystalline rodlike bismuth sulfide (CB/Bi₂S₃) composite prepared by an ultrasonic method is reported and utilized for the rapid analysis of APAP. The highly oriented edge reactive sites of the CB/Bi₂S₃ composite promoted synergy and good electrochemical sensing performance with a fast electron transfer rate and low overpotential (0.35 V). Therefore, a CB/Bi₂S₃ composite-modified glassy carbon electrode (GCE) was applied to the selective determination of APAP by the voltammetric technique. The CB/Bi₂S₃ composite-modified electrode showed the lowest limit of detection of APAP (1.9 nM) with excellent sensitivity. The proposed CB/Bi₂S₃/GCE platform exhibited high selectivity, excellent stability (87.15%), and reproducibility. Also, the CB/Bi₂S₃/GCE sensor was then successfully used to analyze an APAP pharmaceutical sample and exhibited satisfactory outcomes. Therefore, the CB/Bi₂S₃-modified GCE sensor platform would be a low-cost and robust GCE electrode material for APAP detection.

Effects of sonochemical approach and induced contraction of core-shell bismuth sulfide/graphitic carbon nitride as an efficient electrode materials for electrocatalytic detection of antibiotic drug in foodstuffs

Ultrasonic-enhanced surface-active bismuth trisulfide based core-shell nanomaterials were developed and used as an efficient modified electrode material to construct a highly sensitive antibiotic sensor. The core-shell Bi₂S₃@GCN electrode material was directly synthesized by in-situ growth of GCN on Bi₂S₃ to form core-shell like nanostar (Ti-horn, 30 kHz, and 70 W/cm²). The electrocatalyst of Bi₂S₃@GCN nanocomposites was efficaciously broadened towards electrochemical applications. As synthesized Bi₂S₃@GCN promoted the catalytic ability and electrons of GCN to transfer to Bi₂S₃. The single-crystalline GCN layers were uniformly grown on the surface of the Bi₂S₃ nanostars. Under the optimal conditions of electrochemical analysis, the CPL sensor exhibited responses directly proportional to concentrations (toxic chemical) over a range of 0.02-374.4 μM, with a nanomolar detection limit of 1.2 nM (signal-to-noise ratio S/N = 3). In addition, the modified sensor has exhibited outstanding selectivity under high concentrations of interfering chemicals and biomolecules. The satisfactory CPL recoveries in milk product illustrated the credible real-time application of the proposed Bi₂S₃@GCN sensors for real samples, indicating promising potential in food safety department and control. Additionally, the proposed electrochemical antibiotic sensor exhibited outstanding performance of anti-interfering ability, high stability and reproducibility.

Ultrathin 1T-MoS2 Nanoplates Induced by Quaternary Ammonium-Type Ionic Liquids on Polypyrrole/Graphene Oxide Nanosheets and Its Irreversible Crystal Phase Transition During Electrocatalytic Nitrogen Reduction

Ultrathin nanoplates of metastable 1T-MoS₂ have been successfully stabilized and uniformly distributed on the surface of n-butyl triethyl ammonium bromide functionalized polypyrrole/graphene oxide (BTAB/PPy/GO) by a very simple hydrothermal method. BTAB as a typical kind of quaternary ammonium-type ionic liquids (ILs) played a crucial role in the formation of the obtained 1T-MoS₂/BTAB/PPy/GO. It was covalently linked with PPy/GO and arranged in a highly ordered order at the solid-liquid interface of PPy/GO and H₂O due to Coulombic interactions and other intermolecular interactions, which would induce and stabilize ultrathin 1T-MoS₂ nanoplates by morphosynthesis. The good electrocatalytic activity toward nitrogen reduction reaction (NRR) with strong durability and good stability can be achieved by 1T-MoS₂/BTAB/PPy/GO due to their excellent inorganic/organic hierarchical lamellar micro-/nanostructures. Especially, after the long-term electrocatalysis for NRR at a negative potential, metastable 1T-MoS₂ as the catalytic center undergoes two types of irreversible crystal phase transition, which was converted to 1T'-MoS₂ and Mo₂N, caused by the competitive hydrogen evolution reaction (HER) process and the electrochemical reaction between the electroactive 1T-MoS₂ and N₂, respectively. The new N-Mo bonding prevents Mo atoms from binding to other N atoms in N₂, resulting in the deactivation of the electrocatalysts to NRR after being used for 18 h. Even so, quaternary ammonium-type ILs would induce the crystal structures of transition-metal dichalcogenides (TMDCs), which might provide a new thought for the reasonable design of electrocatalysts based on TMDCs for electrocatalysis.

Poly(ionic liquid) composites

This review highlights recent advances in the development of poly(ionic liquid)-based composites for diverse materials applications.

Design and construction of Z-scheme Bi2S3/nitrogen-doped graphene quantum dots: Boosted photoelectric conversion efficiency for high-performance photoelectrochemical aptasensing of sulfadimethoxine

Rational design and fabrication of Z-scheme visible-light-driven photoactive materials have drawn much attention owing to their great potential in handling environment and energy crisis. In this work, Z-scheme Bi₂S₃/nitrogen-doped graphene quantum dots (NGQDs) with superior photoelectric conversion efficiency were designed and fabricated, which demonstrated enhanced photoactivity compared with Bi₂S₃ owing to the improved separation efficiency of photogenerated electron and hole pairs. The emphasis was put on designing Z-scheme Bi₂S₃/NGQDs, and then the mechanism of Z-scheme charge transfer mode was verified by the electron spin resonance (ESR) technique. On this basis, the proposed sensor exhibited a wide linear range of 0.1-120 nM and a detection limit of 0.03 nM (S/N = 3) for SDM, with high sensitivity (0.075 μA nM ^-1), good selectivity and stability. Moreover, the proposed PEC aptasensor using Bi₂S₃/NGQDs as the photoelectrode achieved sensitive and selective determination of sulfadimethoxine in milk samples. This work could provide some ideas for designing other Z-scheme photoactive species and insights into the charge transfer mechanism of Z-scheme. Furthermore, the promising applicability of PEC aptasensor using photoactive species could be extended to other accurate monitoring for contaminants.

Cobalt-Bridged Ionic Liquid Polymer on a Carbon Nanotube for Enhanced Oxygen Evolution Reaction Activity

By taking inspiration from the catalytic properties of single-site catalysts and the enhancement of performance through ionic liquids on metal catalysts, we exploited a scalable way to place single cobalt ions on a carbon-nanotube surface bridged by polymerized ionic liquid. Single dispersed cobalt ions coordinated by ionic liquid are used as heterogeneous catalysts for the oxygen evolution reaction (OER). Performance data reveals high activity and stable operation without chemical instability.

Engineering of Heterojunction-Mediated Biointerface for Photoelectrochemical Aptasensing: Case of Direct Z-Scheme CdTe-Bi2S3 Heterojunction with Improved Visible-Light-Driven Photoelectrical Conversion Efficiency

This work presents a heterojunction-mediated photoelectrochemical (PEC) biointerface for selective detection of microcystin-LR (MC-LR) by introducing a direct Z-scheme heterojunction as efficient visible-light-driven photoactive species. Specifically, the Z-scheme type CdTe-Bi₂S₃ heterojunction was designed and synthesized as an ideal photoactive material, which exhibited higher PEC activity as compared with either CdTe quantum dots or Bi₂S₃ nanorods due to the improved photogenerated charges separation efficiency of heterojunction. Then the MC-LR aptamer was employed for selective recognition of MC-LR target, which was immobilized on the CdTe-Bi₂S₃ film by the formation of phosphor-amidate bonds between the phosphate group of aptamer and amino group of the chitosan film on the electrode. The proposed aptasensor showed a photocurrent signal due to the photoactive CdTe-Bi₂S₃ heterojunction, while the presence of MC-LR resulted in a dose-responsive decrease in PEC response, which allowed the quantification analysis of MC-LR by measuring the photocurrent signal of the fabricated aptasensor. Under optimal conditions, the resulted PEC aptasensor showed wide linear range (0.01-100 pM) and low detection limit (0.005 pM) for MC-LR determination with high selectivity and acceptable reproducibility. Finally, the proposed aptasensing method was successfully applied in MC-LR detection in real water samples.