Microporous Polyamide Membranes for Molecular Sieving of Nitrogen from Volatile Organic Compounds

Design of PDMS/PAN composite membranes with ultra-interfacial stability via layer integration

The interfacial interaction between the selective layer and porous substrate directly determines the separation performance and service lifetime of functional composite membranes. Till now, almost all reported polymeric selective layers are physically in contact with the substrate, which is unsatisfactory for long-term operation. Herein, we introduced a functional composite membrane with ultra-interfacial stability via layer integration between the polydimethylsiloxane selective layer and polyacrylonitrile substrate, where a facile light-triggered copolymerization achieved their covalent bonding. The critical load for the failure of the selective layer is 45.73 mN when testing the interfacial adhesion, i.e., 5.8 times higher than that before modification and significantly higher than previous reports. It also achieves superior pervaporation performance with a separation factor of 9.54 and membrane flux of 1245.6 g m-2 h-1 feeding a 1000 ppm phenol/water solution at 60 °C that is significantly higher than the same type of polymeric ones. Not limited to pervaporation, such a strategy sheds light on the design of highly stable composite membranes with different purposes, while the facile photo-trigged technique shows enormous scalability.

Flexible Covalent Organic Network with Ordered Honeycomb Nanoarchitecture for Molecular Separations

Membranes with precisely defined nanostructure are desirable for energy-efficient molecular separations. The emergence of membranes with honeycomb lattice or topological nanopores is of fundamental importance. The tailor-made nanostructure and morphology may have huge potential to resolve the longstanding bottlenecks in membrane science and technology. Herein, inspired by honeycomb architecture, we demonstrate an effective and scalable route based on interfacial polymerization (IP) to generate flexible and ordered covalent organic network (CON) membranes for liquid-phase molecular separations. The aperture size of a CON membrane can be reasonably designed through the strong covalent bond between molecular building blocks. The fabricated CON membrane formed by IP showed an obviously size-dependent sieving of molecules, yielding a stepwise conversion from low rejection to the expected high rejection. Moreover, the CON membrane was also found to have the sieving capability for tetracycline and ciprofloxacin, ascribed to the effect of size exclusion by an ordered single-nanoscale channel (<1 nm). This approach provides a viable strategy for creating target-sized channels from molecular-level design and demonstrates their potential for accurate molecular separations.

Ultra-stable fully-aromatic microporous polyamide membrane for molecular sieving of nitrogen over volatile organic compound

Microporous polymer membranes are promising candidates for industrial membrane-based gas separation because of their high separation performance. However, their relatively low stability due to the local rearrangement of polymer chains during usage remains a problem. Hence, we propose the construction of a fully aromatic polymer structure in a microporous polymer membrane to enhance membrane stability. Four triptycene-based microporous polyamides were synthesized via the polymerization of 2,6,14-triaminotriptycene with aromatic acyl chloride and/or aliphatic acyl chlorides. Their properties were characterized and compared by using nuclear magnetic resonance (NMR) and Brunauer-Emmett-Teller analyses. The synthesized polyamides were fabricated into composite membranes by employing a solution process; their stability was evaluated for the molecular sieving of nitrogen over volatile organic compounds such as cyclohexane. Low-field NMR and X-ray photoelectron spectroscopy were used to investigate the differences in the properties of membranes with different structures at different times. The results showed that the fully aromatic polyamide membrane made from 2,6,14-triaminotriptycene and aromatic acyl chloride displayed constant rejection (99 %) and nitrogen permeability (approximately 50 Barrer) for the molecular sieving of nitrogen over cyclohexane during 100-d experiments, indicating good stability. This approach paves the way for the industrialization of microporous polymer membranes from a theoretical perspective.

Metal-Organic Framework Membrane Hybridized with Graphitic Materials for Gas Separation

Metal-organic frameworks (MOFs) are an exceptional class of crystalline materials that have been extensively used to fabricate membranes for various applications such as gas separation, ion transport, and desalination due to their well-defined pore structure, chemical features, and simple synthesis process. The incorporation of graphitic carbon materials in MOFs has garnered significant attention as it can provide abundant nucleation sites and modulate gas transport by influencing the orientation or rigidity of MOF crystals without changing their porous structure. This review insights of previous studies utilizing graphene, graphene oxide, carbon nanotubes, and graphene nanoribbons for MOF-based gas separation membranes, particularly focusing on polycrystalline MOF membrane hybridization with graphitic materials. We also briefly discuss the use of carbon/MOF hybrid materials for preparing mixed matrix membranes.

The Difference in Performance and Compatibility between Crystalline and Amorphous Fillers in Mixed Matrix Membranes for Gas Separation (MMMs)

An increasing number of high-performing gas separation membranes is reported almost on a daily basis, yet only a few of them have reached commercialisation while the rest are still considered pure research outcomes. This is often attributable to a rapid change in the performance of these separation systems over a relatively short time. A common approach to address this issue is the development of mixed matrix membranes (MMMs). These hybrid systems typically utilise either crystalline or amorphous additives, so-called fillers, which are incorporated into polymeric membranes at different loadings, with the aim to improve and stabilise the final gas separation performance. After a general introduction to the most relevant models to describe the transport properties in MMMs, this review intends to investigate and discuss the main advantages and disadvantages derived from the inclusion of fillers of different morphologies. Particular emphasis will be given to the study of the compatibility at the interface between the filler and the matrix created by the two different classes of additives, the inorganic and crystalline fillers vs. their organic and amorphous counterparts. It will conclude with a brief summary of the main findings.

Microporous polyimide VOC-rejective membrane for the separation of nitrogen/VOC mixture

The treatment of VOCs (volatile organic compounds) in waste streams is very important. Herein, we propose to use a network microporous polyimide (PI) membrane for the molecular sieving of nitrogen over VOC molecules to control their emission. 2,6,14-triaminotriptycene (Trip) was reacted with aromatic dianhydride monomers, such as 3,3',4,4'-benzophenone tetracarboxylic dianhydride (BTDA), to synthesize ultramicroporous polyimides, which readily form composite membranes via solution coating. The properties of the PIs were characterized by X-ray photoelectron spectroscopy (XPS), Brunner-Emmet-Teller (BET) analysis, etc., which validated the formation of a network structure and ultramicroporosity in these polyimides. Therefore, the outstanding separation performance for the separation of nitrogen over VOCs, such as cyclohexane, by molecular sieving was obtained by using these membranes; a rejection higher than 99 % was realized with a permeability of approximately 2000∼2600 Barrer under a temperature of 25 °C and feed concentration of 30,000 ± 2000 ppm. Finally, the stability of the Trip-BTDA-PI membrane over time was studied.

Isolated-alkene-linked porous organic polymers (BIT-POPs): facile synthesis via ROMP and distinguishing overlapping signals in solid-state 13C NMR

The chemical structures of novel isolated-alkene-linked porous organic polymers (named BIT-POPs) were investigated through spectral editing techniques based on solid-state NMR.

Photochemical [2 + 2] polymerization of metal-organic gels of a rigid and angular diene with silver-salts of diverse anions: selective dye-sorption and luminescence by xerogels

Two similar types of dienes, one rigid and the other flexible, were explored for their gel formation abilities with Ag(i) salts. The rigid and angular dienes have shown an exceptional ability for gel formation with silver salts of nitrate, triflate, tetrafluoro borate and hexafluorophosphate. These metal-organic gels (MOGs) and their xerogels are found to have an excellent ability to undergo the photochemical [2 + 2] polymerization reaction upon irradiation. The reactions were monitored, and the products were characterized via1H NMR and MALDI-TOF analyses. Further, the solid-state luminescence behaviour and the selective dye-sorption of the gels have been explored before and after the photo-polymerization reaction.

A Novel Anion Exchange Membrane for Bisulfite Anion Separation by Grafting a Quaternized Moiety through BPPO via Thermal-Induced Phase Separation

Ion-exchange membranes are the core elements for an electrodialysis (ED) separation process. Phase inversion is an effective method, particularly for commercial membrane production. It introduces two different mechanisms, i.e., thermal induced phase separation (TIPS) and diffusion induced phase separation (DIPS). In this study, anion exchange membranes (AEMs) were prepared by grafting a quaternized moiety (QM,2-[dimethylaminomethyl]naphthalen-1-ol) through brominated poly (2,6-dimethyl-1,4-phenylene oxide) (BPPO) via the TIPS method. Those membranes were applied for selective bisulfite (HSO₃^-) anion separation using ED. The membrane surface morphology was characterized by SEM, and the compositions were magnified using a high-resolution transmission electron microscope (HRTEM). Notably, the membranes showed excellent substance stability in an alkali medium and in grafting tests performed in a QM-soluble solvent. The ED experiment indicated that the as-prepared membrane exhibited better HSO₃^- separation performance than the state-of-the-art commercial Neosepta AMX (ASTOM, Japan) membrane.

Finely Tuned Submicroporous Thin-Film Molecular Sieve Membranes for Highly Efficient Fluid Separations

Polymeric membranes with increasingly high permselective performances are gaining a significant role in lowering the energy burden and improving the environmental sustainability of complex chemical separations. However, the commercial deployment of newly designed materials with promising intrinsic properties for fluid separations has been stalled by challenges associated with fabrication and scale up of low-cost, high-performance, defect-free thin-film composite (TFC) membranes. Here, a facile method to fabricate next-generation TFC membranes using a bridged-bicyclic triptycene tetra-acyl chloride (Trip) building block with a large fraction of finely tuned structural submicroporosity (pore size < 4 Å) is demonstrated. The TFCs exhibit superb potential for removal of small (≈200 g mol^-1 ) organic microcontaminants from organic solvent streams by showing both improved rejection and permeance in organic systems compared to current state-of-the-art commercial membranes. The TFCs also display unprecedented properties for desalination applications with performance located far above the current water permeance/sodium chloride rejection trendline. The strategy of using highly contorted triptycene building blocks with well-defined interconnected internal free volume elements establishes a scalable, generalized approach to fabricate highly selective, submicroporous TFC membranes for a wide variety of challenging energy-intensive fluid separations.

Recent Advances in Applications of Cellulose Derivatives-Based Composite Membranes with Hydroxyapatite

The development of novel polymeric composites based on cellulose derivatives and hydroxyapatite represents a fascinating and challenging research topic in membranes science and technology. Cellulose-based materials are a viable alternative to synthetic polymers due to their favorable physico-chemical and biological characteristics. They are also an appropriate organic matrix for the incorporation of hydroxyapatite particles, inter and intramolecular hydrogen bonds, as well as electrostatic interactions being formed between the functional groups on the polymeric chains surface and the inorganic filler. The current review presents an overview on the main application fields of cellulose derivatives/hydroxyapatite composite membranes. Considering the versatility of hydroxyapatite particles, the hybrid materials offer favorable prospects for applications in water purification, tissue engineering, drug delivery, and hemodialysis. The preparation technique and the chemical composition have a big influence on the final membrane properties. The well-established membrane fabrication methods such as phase inversion, electrospinning, or gradual electrostatic assembly are discussed, together with the various strategies employed to obtain a homogenous dispersion of the inorganic particles in the polymeric matrix. Finally, the main conclusions and the future directions regarding the preparation and applications of cellulose derivatives/hydroxyapatite composite membranes are presented.

Synthesis and Gas-Permeation Characterization of a Novel High-Surface Area Polyamide Derived from 1,3,6,8-Tetramethyl-2,7-diaminotriptycene: Towards Polyamides of Intrinsic Microporosity (PIM-PAs)

A triptycene-based diamine, 1,3,6,8-tetramethyl-2,7-diamino-triptycene (TMDAT), was used for the synthesis of a novel solution-processable polyamide obtained via polycondensation reaction with 4,4'-(hexafluoroisopropylidene)bis(benzoic acid) (6FBBA). Molecular simulations confirmed that the tetrasubstitution with ortho-methyl groups in the triptycene building block reduced rotations around the C⁻N bond of the amide group leading to enhanced fractional free volume. Based on N₂ sorption at 77 K, 6FBBA-TMDAT revealed microporosity with a Brunauer⁻Emmett⁻Teller (BET) surface area of 396 m² g-1; to date, this is the highest value reported for a linear polyamide. The aged 6FBBA-TMDAT sample showed moderate pure-gas permeabilities (e.g., 198 barrer for H₂, ~109 for CO₂, and ~25 for O₂) and permselectivities (e.g., αH₂/CH₄ of ~50) that position this polyamide close to the 2008 H₂/CH₄ and H₂/N₂ upper bounds. CO₂⁻CH₄ mixed-gas permeability experiments at 35 °C demonstrated poor plasticization resistance; mixed-gas permselectivity negatively deviated from the pure-gas values likely, due to the enhancement of CH₄ diffusion induced by mixing effects.

Optically active triptycenes containing hexa-peri-hexabenzocoronene units

We have successfully generated both left- and right-handed circularly polarized light using crystals prepared from a racemic triptycene containing hexa-peri-hexabenzocoronene units.

Membranes with Intrinsic Micro-Porosity: Structure, Solubility, and Applications

Microporous polymer membranes have been widely studied because of their excellent separation performance. Among them, polymers of intrinsic micro-porosity (PIMs) have been regarded as a potential next-generation membrane material for their ultra-permeable characteristics and their solution-processing ability. Therefore, many reviews have been reported on gas separation and monomers for the preparation of PIMs. This review aims to provide an overview of the structure-solubility property. Different structures such as non-network and network macromolecular structure made of different monomers have been reviewed. Then their solubility with different structures and different separation applications such as nanofiltration, pervaporation, and gas/vapor separation are summarized. Lastly, we also provide our perspectives on the challenges and future directions of the microporous polymer membrane for the structure-property relationship, anti-physical aging, and more.