A Cd-based crystalline network material: catalytic properties and post-synthetic metal-ion metathesis with enhanced stability and gas sorption behaviour

This study presents the synthesis of a Cd(II) based hydrophobic three dimensional crystalline network material (CNM), [Cd3(L)2(LH)2(bpe)2], {L = {4,4'-(hexafluroisopropylidine)bis(benzoate)} and 1,2-di(4-pyridyl) ethylene (bpe)}, 1(Cd), by employing the slow-diffusion method. The three-dimensional structure of 1(Cd) was determined by single crystal X-ray diffraction and characterized by powder X-ray diffraction (PXRD), FT-IR spectroscopy and thermogravimetric analysis (TGA). Subsequently, post-synthetic modification of 1(Cd) with Cu(II) at room temperature led to the formation of isostructural 1(Cu) with partial substitution. This transformation, unattainable through de novo synthesis, was monitored using energy dispersive X-ray analysis (EDX), PXRD, FT-IR spectroscopy, and through visual observation confirming a single crystal to single crystal metal exchange. The modified material, 1(Cu), exhibited red-shifted emission with enhanced thermal stability and a tenfold increase in N2 uptake. Furthermore, the catalytic potential of 1(Cd) in aza-Michael addition reactions of α,β-unsaturated olefins to nucleophilic aromatic/aliphatic amines was demonstrated successfully under ambient conditions. This approach employed a heterogeneous and acid-base free methodology, showcasing the versatility and effectiveness of 1(Cd) as a catalyst.

Ultrastable Carboxyl-Functionalized Pore-Space-Partitioned Metal-Organic Frameworks for Gas Separation

Isoreticular chemistry, which enables property optimization by changing compositions without changing topology, is a powerful synthetic strategy. One of the biggest challenges facing isoreticular chemistry is to extend it to ligands with strongly coordinating substituent groups such as unbound -COOH, because competitive interactions between such groups and metal ions can derail isoreticular chemistry. It is even more challenging to have an isoreticular series of carboxyl-functionalized MOFs capable of encompassing chemically disparate metal ions. Here, with the simultaneous introduction of carboxyl functionalization and pore space partition, a family of carboxyl-functionalized materials is developed in diverse compositions from homometallic Cr3+ and Ni2+ to heterometallic Co2+/V3+, Ni2+/V3+, Co2+/In3+, Co2+/Ni2+. Cr-MOFs remain highly crystalline in boiling water. Unprecedentedly, one Cr-MOF can withstand the treatment cycle with 10m NaOH and 12m HCl, allowing reversible inter-conversion between unbound -COOH acid form and -COO- base form. These materials exhibit excellent sorption properties such as high uptake capacity for CO2 (100.2 cm3 g-1) and hydrocarbon gases (e.g., 142.1 cm3 g-1 for C2H2, 110.5 cm3 g-1 for C2H4) at 1 bar and 298K, high benzene/cyclohexane selectivity (up to ≈40), and promising separation performance for gas mixtures such as C2H2/CO2 and C2H2/C2H4.

Metal-Organic Frameworks Derived Carbon-Supported Metal Electrocatalysts for Energy-Related Reduction Reactions

Electrochemical reduction reactions, as cathodic processes in many energy-related devices, significantly impact the overall efficiency determined mainly by the performance of electrocatalysts. Metal-organic frameworks (MOFs) derived carbon-supported metal materials have become one of star electrocatalysts due to their tunable structure and composition through ligand design and metal screening. However, for different electroreduction reactions, the required active metal species vary in phase component, electronic state, and catalytic center configuration, hence requiring effective customization. From this perspective, this review comprehensively analyzes the structural design principles, metal loading strategies, practical electroreduction performance, and complex catalytic mechanisms, thereby providing insights and guidance for the future rational design of such electroreduction catalysts.

Programmable Water Sorption through Linker Installation into a Zirconium Metal-Organic Framework

Hydrolytically stable materials exhibiting a wide range of programmable water sorption behaviors are crucial for on-demand water sorption systems. While notable advancements in employing metal-organic frameworks (MOFs) as promising water adsorbents have been made, developing a robust yet easily tailorable MOF scaffold for specific operational conditions remains a challenge. To address this demand, we employed a topology-guided linker installation strategy using NU-600, which is a zirconium-based MOF (Zr-MOF) that contains three vacant crystallographically defined coordination sites. Through a judicious selection of three N-heterocyclic auxiliary linkers of specific lengths, we installed them into designated sites, giving rise to six new MOFs bearing different combinations of linkers in predetermined positions. The resulting MOFs, denoted as NU-606 to NU-611, demonstrate enhanced structural stability against capillary force-driven channel collapse during water desorption due to the increased connectivity of the Zr6 clusters in the resulting MOFs. Furthermore, incorporating these auxiliary linkers with various hydrophilic N sites enables the systematic modulation of the pore-filling pressure from about 55% relative humidity (RH) for the parent NU-600 down to below 40% RH. This topology-driven linker installation strategy offers precise control of water sorption properties for MOFs, highlighting a facile route to design MOF adsorbents for use in water sorption applications.

Metal-Organic Frameworks Based Sensor Platforms for Rapid Detection of Contaminants in Wastewater

Metal-organic frameworks (MOFs) are a type of multifunctional material with organic-inorganic doped metal complexes that have a lot of unsaturated metal sites and a consistent network structure. MOFs work has great performance for enhancing the mass transfer, signal, and sensitivity as well as analyte enrichment. This study highlights the recent advancements of MOFs-based sensors for pollutant detection in a water environment and summarizes the effect of various synthetic materials on the performance of MOFs-based sensors. The related challenges and optimization techniques have been discussed. Then the research results of various MOFs sensors in the detection of wastewater pollutants are analyzed. Finally, the challenges facing MOFs-based water sensor development and the outlook for future research are discussed.

Water-stable metal-organic frameworks (MOFs): rational construction and carbon dioxide capture

Metal-organic frameworks (MOFs) are considered to be a promising porous material due to their excellent porosity and chemical tailorability. However, due to the relatively weak strength of coordination bonds, the stability (e.g., water stability) of MOFs is usually poor, which severely inhibits their practical applications. To prepare water-stable MOFs, several important strategies such as increasing the bonding strength of building units and introducing hydrophobic units have been proposed, and many MOFs with excellent water stability have been prepared. Carbon dioxide not only causes a range of climate and health problems but also is a by-product of some important chemicals (e.g., natural gas). Due to their excellent adsorption performances, MOFs are considered as a promising adsorbent that can capture carbon dioxide efficiently and energetically, and many water-stable MOFs have been used to capture carbon dioxide in various scenarios, including flue gas decarbonization, direct air capture, and purified crude natural gas. In this review, we first introduce the design and synthesis of water-stable MOFs and then describe their applications in carbon dioxide capture, and finally provide some personal comments on the challenges facing these areas.

Symmetry-Mismatched SBU Transformation in MOFs: Postsynthetic Metal Exchange from Zn to Fe and Its Effects on Gas Adsorption and Dye Selectivity

This research explores the alteration of metal-organic frameworks (MOFs) using a method called postsynthetic metal exchange. We focus on the shift from a Zn-based MOF containing a [Zn4O(COO)6] secondary building unit (SBU) of octahedral site symmetry (ANT-1(Zn)) to a Fe-based one with a [Fe3IIIO(COO)6]+ SBU of trigonal prismatic site symmetry (ANT-1(Fe)). The symmetry-mismatched SBU transformation cleverly maintains the MOF's overall structure by adjusting the conformation of the flexible 1,3,5-benzenetribenzoate linker to alleviate the framework strain. The process triggers a decrease in the framework volume and pore size alongside a change in the framework's charge. These alterations influence the MOF's ability to adsorb gas and dye. During the transformation, core-shell MOFs (ANT-1(Zn@Fe)) are formed as intermediate products, demonstrating unique gas sorption traits and adjusted dye adsorption preferences due to the structural modifications at the core-shell interface. Heteronuclear clusters, located at the framework interfaces, enhance the heat of CO2 adsorption. Furthermore, they also influence the selectivity of the dye size. This research provides valuable insights into fabricating novel MOFs with unique properties by modifying the SBU of a MOF with flexible organic linkers from one site symmetry to another.

Creating Order in Ultrastable Phosphonate Metal-Organic Frameworks via Isolable Hydrogen-Bonded Intermediates

The stability presented by trivalent metal-organic frameworks (MOFs) makes them an attractive class of materials. With phosphonate-based ligands, crystallization is a challenge, as there are significantly more binding motifs that can be adopted due to the extra oxygen tether compared to carboxylate counterparts and the self-assembly processes are less reversible. Despite this, we have reported charge-assisted hydrogen-bonded metal-organic frameworks (HMOFs) consisting of [Cr(H2O)6]3+ and phosphonate ligands, which were crystallographically characterized. We sought to use these HMOFs as a crystalline intermediate to synthesize ordered Cr(III)-phosphonate MOFs. This can be done by dehydrating the HMOF to remove the aquo ligands around the Cr(III) center, forcing metal-phosphonate coordination. Herein, a new porous HMOF, H-CALF-50, is synthesized and then dehydrated to yield the MOF CALF-50. CALF-50 is ordered, although it is not single crystalline. It does, however, have exceptional stability, maintaining crystallinity and surface area after boiling in water for 3 weeks and soaking in 14.5 M H3PO4 for 24 h and 9 M HCl for 72 h. Computational methods are used to study the HMOF to MOF transformation and give insight into the nature of the structure and the degree of heterogeneity.

Metal-organic frameworks for wastewater treatment: Recent developments, challenges, and future prospects

Wastewater treatment is critically important for the existence of life on earth; however, this approach involves the removal of toxic metal contaminants and organic pollutants, requiring efficient adsorbent materials. Within this agenda, metal-organic frameworks (MOFs) appear to be potential materials due to their unique properties as efficient adsorbents, effective photocatalysts, and reliable semi-permeable membranes. Therefore, MOFs have undergone various modifications over the years without desirable success to improve adsorption capacity, hydro-stability, reaction kinetics, and reusability. Therefore, scientists around the world got engaged in MOF research for novel modifications, including defect engineering, carbonization, and membrane fabrication, at the laboratory scale. This review focuses on developing MOF-based adsorbents, photocatalysts, and semi-permeable membranes for wastewater treatment since 2015, emphasizing their structural-functional relationships. Finally, the challenges and opportunities with MOFs in wastewater treatment are also underlined for future efforts.

Endowing Porphyrinic Metal-Organic Frameworks with High Stability by a Linker Desymmetrization Strategy

The fabricating of metal-organic frameworks (MOFs) that integrate high stability and functionality remains a long-term pursuit yet a great challenge. Herein, we develop a linker desymmetrization strategy to construct highly stable porphyrinic MOFs, namely, USTC-9 (USTC represents the University of Science and Technology of China), presenting the same topological structure as the well-known PCN-600 that readily loses crystallinity in air or upon conventional activation. For USTC-9, the involved porphyrinic linker (TmCPP-M) with carboxylate groups located in the meta-position presents a chair-shaped conformation with lower C_2h symmetry than that (D_4h) of the common porphyrinic carboxylate (TCPP) linker in PCN-600. As a result, the wrinkled and interlocked linker arrangements collectively contribute to the remarkable stability of USTC-9. Given the high stability and porosity as well as Lewis acidity, USTC-9(Fe) demonstrates its excellent performance toward catalytic CO₂ cycloaddition with diverse epoxides at moderate temperature and atmospheric pressure.

An ultrastable La-MOF for catalytic hydrogen transfer of furfural: in situ activation of the surface

The poor stability of metal-organic frameworks (MOFs) severely limits their catalytic application. The in situ activation of stable MOF catalysts not only simplifies the catalytic process, but also reduces energy consumption. Therefore, it is meaningful to explore the in situ activation of the MOF surface in the actual reaction process. In this paper, a novel rare-earth MOF La₂(QS)₃(DMF)₃ (LaQS) was synthesized, which exhibited ultra-high stability not only in organic solvents but also in aqueous solutions. When LaQS was used as a catalyst for the catalytic hydrogen transfer (CHT) of furfural (FF) to furfuryl alcohol (FOL), the FF conversion and FOL selectivity reached 97.8% and 92.1%, respectively. Meanwhile, the high stability of LaQS ensures an enhanced catalytic cycling performance. The excellent catalytic performance is mainly attributed to the acid-base synergistic catalysis of LaQS. More importantly, it has been confirmed by control experiments and DFT calculation that the in situ activation in catalytic reactions leads to the formation of acidic sites in LaQS, together with the uncoordinated oxygen atoms of sulfonic acid groups in LaQS as Lewis bases, which can synergistically activate FF and isopropanol. Finally, the mechanism of in situ activation-caused acid-base synergistic catalysis of FF is speculated. This work provides meaningful enlightenment for the study of the catalytic reaction path of stable MOFs.

Evaluation of cytotoxicity, loading, and release activity of paclitaxel loaded-porphyrin based metal-organic framework (PCN-600)

Considering the inducement side impacts and precipitation of continual doses in conventional therapeutic treatments, there is an urgent need in the field of drug delivery for novel designs of biocompatible carriers with wide loading dimensions and particularly the ability to control their drug release. In this work, we succeeded in synthesizing an iron-based organic metal framework based on iron-porphyrin (PCN-600) through a solvothermal method to function as a drug delivery system (DDS). According to SEM results, PCN-600 crystals a hexagonal-rod shaped morphology with the length of 300 nm and width of 100-300 nm. As an anticancer drug, Paclitaxel (PTX) was successfully loaded into the porphyrin-based metal-organic framework (PCN-600) via in-situ encapsulation; the loading efficiency was measured to be about 87.3%. In addition, PTX-encapsulated PCN-600 displayed a controlled and sustained release for up to 24 h of release assessment at the physiological microenvironment of pH = 7.4.

Enhanced transmembrane electron transfer in Shewanella oneidensis MR-1 using gold nanoparticles for high-performance microbial fuel cells

Low efficiency of extracellular electron transfer (EET) is a major bottleneck in developing high-performance microbial fuel cells (MFCs). Herein, we construct Shewanella oneidensis MR-1@Au for the bioanode of MFCs. Through performance recovery experiments of mutants, we proved that abundant Au nanoparticles not only tightly covered the bacteria surface, but were also distributed in the periplasm and cytoplasm, and even embedded in the outer and inner membranes of the cell. These Au nanoparticles could act as electron conduits to enable highly efficient electron transfer between S. oneidensis MR-1 and electrodes. Strikingly, the maximum power density of the S. oneidensis MR-1@Au bioanode reached up to 3749 mW m-2, which was 17.4 times higher than that with the native bacteria, reaching the highest performance yet reported in MFCs using Au or Au-based nanocomposites as the anode. This work elucidates the role of Au nanoparticles in promoting transmembrane and extracellular electron transfer from the perspective of molecular biology and electrochemistry, while alleviating bottlenecks in MFC performances.

A microporous chromium-organic framework fabricated via solvent-assisted metal metathesis for C2H2/CO2 separation

Removal of CO₂ or C₂H₄ from C₂H₂ is still a challenging task due to their similar physical-chemical properties. Here, a bifunctional ligand decorated with amino and sulfoxide groups, 5',5''''-sulfonylbis (2'-amino-[1,1':3',1''-terphenyl]-4,4''-dicarboxylic acid) (H₄L), was employed to construct a new microporous iron-organic framework (Fe-MOF) with the formula [(Fe₃O)(L)_1.5(H₂O)₃]_n. This MOF can serve as a parent structure to obtain the isostructural Cr-MOF by solvent-assisted metal metathesis. Furthermore, the gas adsorption and separation performance of these two MOFs were systematically investigated. Compared to Fe-MOF, Cr-MOF shows a moderately higher CO₂, C₂H₂ and C₂H₄ uptake capacity. Additionally, Cr-MOF can selectively adsorb C₂H₂ over CO₂ and C₂H₄. The separation potential towards C₂H₂/C₂H₄ and C₂H₂/CO₂ was further established via IAST calculations of mixture adsorption equilibrium. IAST selectivity values of Cr-MOF are 3.4 for C₂H₂/C₂H₄ and 6.9 for C₂H₂/CO₂ at 298 K and initial pressure, indicating its potential C₂H₂ separation ability.

Increasing the Stability of Metal-Organic Frameworks by Coating with Poly(tetrafluoroethylene)

When compared to industrially stable zeolites, the instability of metal-organic frameworks (MOFs) has been denounced by researchers. Boosting the stability of existing MOFs is highly important for practical applications. In this report, we develop a new strategy to prepare MOFs/poly(tetrafluoroethylene) (PTFE) composites, which can highly improve the chemical, pressure, and photostabilities of zeolitic imidazolate framework (ZIF)-8. Composite materials were prepared by a physical blending of ZIF-8 and PTFE emulsion with different ratios and annealing at 370 °C. Transmission electron microscopy (TEM) studies reveal that the nanoparticles of ZIF-8 are coated by PTFE to form the composite materials. Upon mixing with 20 or 50 wt % PTFE, the ZIF-8/PTFE materials show a superhydrophobic property with water contact angles of around 156°. Pristine ZIF-8 is not stable in water with stirring under acidic, basic, and irradiation conditions, while the ZIF-8/PTFE materials are stable under the same conditions. The ZIF-8/PTFE materials can also maintain their crystalline structure after being compressed with a 10 MPa pressure, while pristine ZIF-8 changes to an amorphous solid after the same pressure treatment. Using water as a solvent, ZIF-8/PTFE can be used as a highly efficient and recyclable catalyst for Knoevenagel reaction at room temperature. The successful preparation of stable ZIF-8/PTFE composite materials provides a useful method to enhance the chemical, pressure, and photostabilities of MOFs.

Preparation of an interpenetrating bimetal metal–organic framework via metal metathesis used for promoting gas adsorption

Novel interpenetrating bimetallic MIL-126(Cr/Sc) has been synthesized using a metal metathesis method, and showed a higher CO2, N2O and C2H2 uptake and binding energy than the parent MIL-126(Sc) material.

Sequential enhancement of proton conductivity by aliovalent cadmium substitution and post-synthetic esterolysis in a carboxylicate-functionalized indium framework with dimethylaminium templates

A sequential improving strategy has devised and implemented on a 3D open framework In-BQ showing 2D intersected channels filled by dimethylamine and its protonated cation constructed by −COOCH3 functionalized anilicate...

The missing MIL-101(Mn): geometrically guided synthesis and topologically correlated valence states

Through a geometrically guided approach, i.e. with the aid of pyridyl modulators, the long-sought MIL-101(Mn) structure is finally achieved, which features emergent topologically correlated mixed-valence states that are apt for enzymatic catalysis.

Metal–organic framework (MOF)-, covalent-organic framework (COF)-, and porous-organic polymers (POP)-catalyzed selective C–H bond activation and functionalization reactions

The review summarizes the state-of-the-art of C–H active transformations over crystalline and amorphous porous materials as new emerging heterogeneous (photo)catalysts.

Ultrastable High-Connected Chromium Metal-Organic Frameworks

State-of-the-art MOFs are generally known for chemical stability at one end of the pH scale (i.e., pH < 0 or pH > 14). Herein, we report new Cr-MOFs capable of withstanding extreme pH conditions across approximately 16 pH units from pH < 0 to pH > 14, likely the largest observed pH range for MOFs. The integration of multiple stability-enhancing factors including nonlabile Cr³⁺, mixed Cr-N and Cr-O cross-links, and the highest possible connectivity by Cr₃O trimers enables extraordinary chemical stability confirmed by both PXRD and gas adsorption. Notably, the base stability is much higher than literature Cr-MOFs, thereby revitalizing Cr-MOF's viability in the pursuit for the most chemically stable MOFs. Among known cationic MOFs, the chemical stability of these new Cr-MOFs is unmatchable, to our knowledge. These Cr-MOFs can be developed into multiseries of isoreticular MOFs with a rich potential for functionalization, pore size, and pore geometry engineering and applications.

Construction of a Porous Metal-Organic Framework with a High Density of Open Cr Sites for Record N2 /O2 Separation

The removal of low concentration N₂ is of great significance and challenging in the industrial production of high-purity O₂ . Herein, a chromium-based metal-organic framework, namely, TYUT-96Cr, is reported, which has an unprecedented N₂ capture capacity of 37.46 cm³ cm^-3 and N₂ /O₂ (5:95, v/v) selectivity up to 26.95 (298 K and 1 bar), thus setting new benchmarks for all reported metal-organic frameworks and commercially used ones (Li-LSX and 13X). Breakthrough experiments reveal that N₂ can be directly extracted from various N₂ /O₂ (79:21, 50:50, 5:95, and 1:99, v/v) mixtures by this material, affording a record-high O₂ -production scale with 99.99% purity. Density functional theory calculations and in situ infrared spectroscopy studies demonstrate that the high-density open Cr (III) sites in TYUT-96Cr can behave as effective Lewis acidic sites, thus resulting in a strong affinity toward N₂ . The high N₂ adsorption selectivity, exceptional separation performance, and ultrahigh structural stability render this porous material with great potential for this important industrial application.

In Situ Aliovalent Nickle Substitution and Acidic Modification of Nanowalls Promoted Proton Conductivity in InOF with 1D Helical Channel

Proton-conductive materials have attracted increasing attention because of their broad explorations in chemical sensors, water electrolysis, fuel cells, and biological systems. Especially, metal-organic frameworks (MOFs) have been demonstrated to be extremely promising candidates as proton-exchange membrane (PEM) fuel cells. Compared with other configurations, MOFs with one-dimensional (1D) channels have the characteristics of enhancing the host-guest interaction and promoting the anisotropic motion of proton carriers in restricted volume, which are beneficial for acquiring rich proton sources and forming successive hydrogen bonds to improve proton conductivity. We are endeavored to screen and find a helical three-dimensional (3D) framework InOF-1, namely, [In₂(OH)₂(BPTC)]·6H₂O (BPTC^4- = 3,3',5,5'-biphenyl tetracarboxylate), as a typical 1D-channel MOF, which is pristinely grafted with spirally distributed -OH groups on the channel surface. Accompanied by an aliovalent substitution Ni(II) for In(III), isostructural NiOF-1 ([Ni₂(BPTC)(HCOOH)₂]·3H₂O) is successfully prepared and massive formic acids are anchored at interior walls, which are interacted with adsorbed water molecules via the formation of stronger O-H···O bonds. This interaction between host-guest molecules and dynamics of lattice water has already led to a remarkable conductivity of InOF-1 (σ = 7.86 × 10^-3 S/cm at 328 K under 95% RH). The synergistic effect of the acidic-modified nanowall, contracted volume, and enhanced adsorption of water molecules in the NiOF-1 channel contributes to a high conductivity value of 3.41 × 10^-2 S/cm (at 328 K under 95% RH). Moreover, the proton conduction mechanism is further visually presented by molecular dynamic (MD) simulation. In contrast to InOF-1, aliovalent-substituted and acidic-modified NiOF-1 has a stronger host-guest interaction and more abundant hydrogen-bond networks, resulting in shorter proton migration distances and more frequent proton hopping, in agreement with the experimental results.

Chemically Stable Metal-Organic Frameworks: Rational Construction and Application Expansion

Metal-organic frameworks (MOFs) have been attracting tremendous attention owing to their great structural diversity and functional tunability. Despite numerous inherent merits and big progress in the fundamental research (synthesizing new compounds, discovering new structures, testing associated properties, etc.), poor chemical stability of most MOFs severely hinders their involvement in practical applications, which is the final goal for developing new materials. Therefore, constructing new stable MOFs or stabilizing extant labile MOFs is quite important. As with them, some "potential" applications would come true and a lot of new applications under harsh conditions can be explored. Efficient strategies are being pursued to solve the stability problem of MOFs and thereby achieve and expand their applications.In this Account, we summarize the research advance in the design and synthesis of chemically stable MOFs, particularly those stable in acidic, basic, and aqueous systems, as well as in the exploration of their applications in several expanding fields of environment, energy, and food safety, which have been dedicated in our lab over the past decade. The strategies for accessing stable MOFs can be classified into: (a) assembling high-valent metals (hard acid, such as Zr⁴⁺, Al³⁺) with carboxylate ligands (hard base) for acid-stable MOFs; (b) combining low-valent metals (soft acid, such as Co²⁺, Ni²⁺) and azolate ligands (soft base, such as pyrazolate) for alkali-resistant MOFs; (c) enhancing the connectivity of the building unit; (d) contracting or rigidifying the ligand; (e) increasing the hydrophobicity of the framework; and (f) substituting liable building units with stable ones (such as metal metathesis) to obtain robust MOFs. In addition, other factors, including the geometry and symmetry of building units, framework-framework interaction, and so forth, have also been taken into account in the design and synthesis of stable MOFs. On the basis of these approaches, the stability of resulting MOFs under corresponding conditions has been remarkably enhanced.With high chemical stability achieved, the MOFs have found many new and significant applications, aiming at addressing global challenges related to environmental pollution, energy shortage, and food safety.A series of stable MOFs have been constructed for detecting and eliminating contaminations. Various fluorescent MOFs were rationally customized to be powerful platforms for sensing hazardous targets in food and water, such as dioxins, antibiotics, veterinary drugs, and heavy metal ions. Some hydrophobic MOFs even showed effective and specific capture of low-concentration volatile organic compounds.Novel MOFs with record-breaking acid/base/nucleophilic regent resistance have expanded their application scope under harsh conditions. BUT-8(Cr)A, as the most acid-stable MOF yet, showed reserved structural integrity in concentrated H₂SO₄ and recorded high proton conductivity; the most alkali-resistant MOF, PCN-601, retained crystallinity even in boiling saturated NaOH aqueous solution, and such base-stable MOFs composed of non-noble metal clusters and poly pyrazolate ligands also demonstrated great potential in heterogeneous catalysis in alkaline/nucleophilic systems for the first time.It is believed that this Account will provide valuable references on stable MOFs' construction as well as application expansion toward harsh conditions, thereby being helpful to promote MOF materials to step from fundamental research to practical applications.

Introducing High Density of Very Active Sites and Stepwise Postmodification for Tailoring the Porosity of Highly Demanding Cr3+-Based Metal-Organic Frameworks

Chromium(III)-based metal-organic frameworks (Cr-MOFs) are highly robust and porous and have been very attractive in a wide range of investigations. However, the harsh direct synthetic conditions not only impede the synthesis of new Cr-MOFs but also restrict the introduction of functional groups into them. Postsynthetic modification has somewhat alleviated such difficulties; nevertheless, it still suffered from procedures that are tedious and conditions that are not mild, which often result in low concentration of the functional groups introduced. To overcome these shortcomings, here, in this paper, we supplied a new route and prepared a benzyl alcohol functionalized Cr-SXU-2 from the judiciously designed benzyl alcohol functionalized Fe-SXU-2 through solvent-assisted metal metathesis strategy. The functionalized Cr-SXU-2 shows well-preserved crystallinity, porosity, and high chemical stability. The benzyl alcohol group can be converted into a very active benzyl bromide group in an almost quantitative yield and thus for the first time produce the benzyl bromide functionalized MOF, Cr-SXU-2-Br, in which the -Br group can be exchanged by a nucleophilic group. As a proof of concept, -N₃ was introduced and transformed into other active sites via "click reaction" to further tailor the interior of Cr-SXU-2. All these functionalized Cr-MOFs showed improved adsorption performance in contrast to the nonfunctionalized one. This step-by-step postmodification process not only diversifies the functionalization of robust MOFs but also opens a new route to employ many different functional groups in the demanding highly stable Cr-MOF platforms.

Synthesis and crystal structure of poly[(3-amino-1,2,4-triazole)(μ3-1H-benzimidazole-5,6-di-carboxyl-ato)cobalt(II)]

The asymmetric unit of the title coordination polymer, [Co(C9H4N2O4)(C2H4N4)] n or [Co(L 1)(L 2)] n , consists of one crystallographically independent Co2+ centre, one L 1 2- ligand and one L 2 ligand (L 1 = 1H-benzimidazole-5,6-di-carb-oxy-lic acid, L 2 = 3-amino-1,2,4-triazole). The Co2+ centre is coordinated by two carboxyl-ato-O atoms from two independent L 1 2- ligands and two nitro-gen atoms from L 2 and another L 1 ligand. Thus, the metal center adopts a four-coordinate mode, forming a tetra-hedral geometry. Inter-estingly, through the combination of two L 1 2-, two L 2 ligands and two Co2+ ions, a basic repeating unit is constructed, resulting in the formation of a one-dimensional straight chain structure. These chains are further expanded to the final three-dimensional framework via N-H⋯O hydrogen-bonding inter-actions.

Biomimetic catalysts of iron-based metal-organic frameworks with high peroxidase-mimicking activity for colorimetric biosensing

The field of metal-organic framework (MOF)-based biomimetic catalysts has achieved great progress but is still in its infancy. The systematic investigation of the tailored construction of MOF-based biomimetic catalysts is required for further development. Herein, two iron-based MOFs, namely, [(Fe₃O)₂(H₂O)₄(HCOO)(L)₂]_n (HUST-5: H₆L = hexakis(4-formylphenoxy) cyclotriphosphazene; HUST = Huazhong University of Science and Technology) and [(Fe₃O)(H₂O)₃(L)]_n (HUST-7) have been fabricated through the assembly of different iron clusters and hexa-carboxylate ligand under the control of the added acid species. The two MOFs exhibit distinct secondary building units (SBUs) and topological structures, which could be used as biomimetic catalysts for the systematic comparisons of structural characteristics and the catalytic activity. Both MOFs possess catalytic activity similar to that of natural peroxidases towards the catalysis of the oxidation of a variety of substrates. Significantly, HUST-5 and HUST-7 can effectively catalyze the oxidation of 3,3',5,5'-tetramethylbenzidine (TMB) by H₂O₂ accompanied by significant colorimetric biosensing. With same compositions, different catalytic performances were obtained due to differences in the porous structures and characteristics of SBUs in two Fe-MOFs, which was also validated by theoretical calculation results. Furthermore, the phenomenon of colorimetric biosensing could be significantly suppressed by the addition of ascorbic acid (AA) during the oxidation process of TMB. It was observed from these findings that a facile colorimetric biosensing platform for detecting H₂O₂ and ascorbic acid has been successfully explored. Therefore, this work provides another unique perspective for the tailor-made preparation of stable MOF-based peroxidase mimics with excellent catalytic performance and colorimetric biosensing.

Isoreticular chemistry of scandium analogues of the multicomponent metal–organic framework MIL-142

MIL-142(Sc) is prepared and the limits of the isoreticular substitution of each linker type are explored and characterised by single-crystal XRD.

Synthesis of a palladium based MOF via an effective post-synthetic modification approach and its catalytic activity towards Heck type coupling reactions

The complete exchange of metal nodes in a MOF with the Pd(ii) ions was done without losing the structural integrity. The new MOF turned out to be an excellent catalyst for the C–C bond formation via un-reacted cleavage C–N bond of arylhydrazines.

Active metal single-sites based on metal–organic frameworks: construction and chemical prospects

Metal single-point is a novel and potential design strategy that has been applied for the development of metal organic frameworks.

Two-dimensional co-crystallization of two carboxylic acid derivatives having dissimilar symmetries at the liquid/solid interface

By the co-assembly of two carboxylic acids with distinct symmetries and different numbers of carboxyl groups, we obtained two novel cocrystal structures at the n-octanoic acid/HOPG interface, one of which was sustained by unoptimized R22(8) hydrogen bonding. Benefiting from the bias-sensitivity of the BTB (1,3,5-tris(4-carboxyphenyl)benzene) molecule, a structure transition between the cocrystal network and a denser BTB lamella is achieved.

Green synthesis of a large series of bimetallic MIL-100(Fe,M) MOFs

Here we present a scalable and green methodology to synthesize a large variety of MIL-100(Fe,M), metal-doped iron-based MOFs with high thermal stability and surface areas.

The effect of coordinated solvent molecules on metal coordination environments in single-crystal-to-single-crystal transformations

We summarized the effect of coordinated solvent molecules on the metal coordination environments in single-crystal to single-crystal transformations.

Recent advances in the shaping of metal–organic frameworks

In this review, the recent advances in the shaping of MOFs are overviewed, and some promising strategies recently developed are highlighted, including templated shaping, self-shaping, shaping on substrates, and shaping with sacrificial materials.

Straightforward preparation of fluorinated covalent triazine frameworks with significantly enhanced carbon dioxide and hydrogen adsorption capacities

The development of advanced functional porous materials for efficient carbon capture and separation is of prime importance with respect to energy and environmental sustainability and employing covalent triazine frameworks as the adsorbents for carbon capture is deemed to be one of the most promising means to alleviate this issue. Herein, we report the construction of a set of partially fluorinated microporous covalent triazine frameworks (FCTFs) with appropriate CO2-philic functionalities (N and F) and high porosities (up to 2060 m2 g-1) for effective gas adsorption and separation. Markedly, the CO2 adsorption capacity of the FCTF materials prepared at a ZnCl2/monomer ratio of 20 and 400 °C reaches up to 4.70 mmol g-1 at 273 K and 1 bar, which is among the top level of all the reported CTFs. In addition, the studied FCTFs also exhibit a significantly high H2 uptake of 1.88 wt% at 77 K and 1 bar, outperforming most of the reported CTF materials under identical conditions. Apart from this, the obtained FCTF materials also display moderate CO2 selectivities over N2 (28) and CH4 (5.6) at room temperature.

Coexistence of Cu(ii) and Cu(i) in Cu ion-doped zeolitic imidazolate frameworks (ZIF-8) for the dehydrogenative coupling of silanes with alcohols

Recently, metal-ion-doped zeolitic imidazolate frameworks have gained considerable attention for their structure tailorability and potential catalytic applications. Herein, Cu ion-doped ZIF-8 nanocrystals were successfully prepared by the mechanical grinding of Cu(NO₃)₂, ZnO and 2-methylimidazole (HMeIM) using ethanol as an additive. In contrast to the general view that only Cu(ii) is present in Cu-doped ZIF-8, we found the coexistence of Cu(ii) and Cu(i) in this material, which was supported by XPS and X-ray induced Auger electron spectroscopy (XAES) characterizations. Moreover, ethanol might have acted as a reducer to induce the reduction of Cu(ii) during synthesis. Due to the mixed valency of Cu ions, the Cu ion-doped ZIF-8 nanocrystals showed excellent catalytic performance in the dehydrogenative coupling of silanes with alcohols.

A Bifunctional Luminescent Metal-Organic Framework for the Sensing of Paraquat and Fe3+ Ions in Water

The hydrothermal reaction of Zn²⁺ ions with a mixture of two ligands, Hcptpy and H₃ btc (Hcptpy=4-(4-carboxyphenyl)-2,2':4',4''-terpyridine; H₃ btc=1,3,5-benzenetricarboxylic acid), led to the formation of a 3D metal-organic framework (MOF) with 1D channels, [Zn₂ (cptpy)(btc)(H₂ O)]_n (1), which was structurally characterized by using single-crystal X-ray diffraction (SXRD). In MOF 1, two independent Zn²⁺ ions were interconnected by btc^3- ligands to form a 1D chain, whilst adjacent Zn²⁺ ions were alternately bridged by cptpy^- ligands to generate a 2D sheet, which was further linked by 1D chains to form a 3D framework with a new (3,3,4,4)-connected topology. Furthermore, compound 1 also exhibited excellent stability towards air and water and, more importantly, luminescence experiments indicated that it could serve as a probe for the sensitive detection of paraquat (PAQ) and Fe³⁺ ions in aqueous solution.

Improving MOF stability: approaches and applications

This review summarizes recent advances in the design and synthesis of stable MOFs and highlights the relationships between the stability and functional applications.

Metal–organic frameworks (MOFs) have been recognized as one of the most important classes of porous materials due to their unique attributes and chemical versatility. Unfortunately, some MOFs suffer from the drawback of relatively poor stability, which would limit their practical applications. In the recent past, great efforts have been invested in developing strategies to improve the stability of MOFs. In general, stable MOFs possess potential toward a broader range of applications. In this review, we summarize recent advances in the design and synthesis of stable MOFs and MOF-based materials via de novo synthesis and/or post-synthetic structural processing. Also, the relationships between the stability and functional applications of MOFs are highlighted, and finally, the subsisting challenges and the directions that future research in this field may take have been indicated.