Probing the Role of a Non-Thermal Plasma (NTP) in the Hybrid NTP Catalytic Oxidation of Methane

Synergistic Enhancement of Plasma-Driven Ammonia Synthesis Using a AuCu3/Cu Composite Catalyst

Green ammonia synthesis using fluctuating renewable energy supply in decentralized process is a goal that has been long sought after. Ammonia synthesis with non-thermal plasma under mild conditions is a promising technology, but it faces the critical challenge of low energy efficiency. Herein, we develop an easily-scalable AuCu3/Cu catalyst, which consists of a decimeter-scale metallic Cu antenna and nano-scale AuCu3 catalytic sites on metallic Cu surface, significantly enhancing the energy efficiency and ammonia yield in a radio-frequency (RF) plasma system. Compared to plasma alone, the single-pass ammonia yield over AuCu3/Cu increases by a factor of 20, approaching 10 %. Mechanistic studies indicate that Cu antenna can amplify the millimeter-scale local electric field, thereby facilitating the generation of active nitrogen species, including nitrogen radicals and vibration-excited nitrogen molecules. Due to the downshifted d-band center and unique Cu-Au interface structure, the AuCu3 nanoalloy modified on Cu antenna surface significantly reduces hydrogenation barriers of active NHX (x=0,1,2) species (the rate-determining step) and facilitates ammonia desorption at lower temperature. The synergistic effect of Cu antenna and surface AuCu3 nanoalloy comprehensively enhances ammonia synthesis through both the nitrogen radical-mediated Eley-Rideal pathway and the vibration-excited nitrogen molecule-mediated Langmuir-Hinshelwood pathway.

Leveraging Expertise in Thermal Catalysis to Understand Plasma Catalysis

Best practices in testing heterogeneous catalysts are translated to plasma-catalytic experiments. Independent determination of plasma-catalytic and plasma-chemical contributions is essential. Non-porous catalyst particles are preferred because active sites inside sub-micron pores cannot contribute. Temperature variation is needed to determine kinetics, despite the complexity of thermal effects in plasma. Rigorous checks on catalyst deactivation and mass balance are needed. Plasma enhanced reversed reactions should be minimized by keeping conversion low and far from thermodynamic equilibrium, preventing underestimation of the rate of forward reaction. In contrast, plasma-catalytic studies often aim at conversions surpassing thermodynamic equilibrium, not obtaining any information on kinetics. Calculation of catalyst activity per active sites (turn-over-frequency) requires also appropriate characterization to determine the number of active sites. The relationship between kinetics and thermodynamics for plasma-catalysis is discussed using endothermic decomposition of CO2 and exothermic synthesis of ammonia from N2 and H2 as examples. Assuming Langmuir-Hinshelwood and Eley-Rideal mechanisms, the effect of excitation of reactant molecules on activation barriers and surface coverages are discussed, influencing reaction rates. The consequences of reversed reactions are considered. Plasma-catalysis with catalysts applied for thermal catalysis at much higher temperature should be avoided, as adsorbed species are bonded too strongly resulting in low rates.

Current Progress on Methods and Technologies for Catalytic Methane Activation at Low Temperatures

Methane (CH4 ) is an attractive energy source and important greenhouse gas. Therefore, from the economic and environmental point of view, scientists are working hard to activate and convert CH4 into various products or less harmful gas at low-temperature. Although the inert nature of CH bonds requires high dissociation energy at high temperatures, the efforts of researchers have demonstrated the feasibility of catalysts to activate CH4 at low temperatures. In this review, the efficient catalysts designed to reduce the CH4 oxidation temperature and improve conversion efficiencies are described. First, noble metals and transition metal-based catalysts are summarized for activating CH4 in temperatures ranging from 50 to 500 °C. After that, the partial oxidation of CH4 at relatively low temperatures, including thermocatalysis in the liquid phase, photocatalysis, electrocatalysis, and nonthermal plasma technologies, is briefly discussed. Finally, the challenges and perspectives are presented to provide a systematic guideline for designing and synthesizing the highly efficient catalysts in the complete/partial oxidation of CH4 at low temperatures.

Cooperative Catalysis of Vibrationally Excited CO2 and Alloy Catalyst Breaks the Thermodynamic Equilibrium Limitation

Using nonthermal plasma (NTP) to promote CO₂ hydrogenation is one of the most promising approaches that overcome the limitations of conventional thermal catalysis. However, the catalytic surface reaction dynamics of NTP-activated species are still under debate. The NTP-activated CO₂ hydrogenation was investigated in Pd₂Ga/SiO₂ alloy catalysts and compared to thermal conditions. Although both thermal and NTP conditions showed close to 100% CO selectivity, it is worth emphasizing that when activated by NTP, CO₂ conversion not only improves more than 2-fold under thermal conditions but also breaks the thermodynamic equilibrium limitation. Mechanistic insights into NTP-activated species and alloy catalyst surface were investigated by using in situ transmission infrared spectroscopy, where catalyst surface species were identified during NTP irradiation. Moreover, in in situ X-ray absorption fine-structure analysis under reaction conditions, the catalyst under NTP conditions not only did not undergo restructuring affecting CO₂ hydrogenation but also could clearly rule out catalyst activation by heating. In situ characterizations of the catalysts during CO₂ hydrogenation depict that vibrationally excited CO₂ significantly enhances the catalytic reaction. The agreement of approaches combining experimental studies and density functional theory (DFT) calculations substantiates that vibrationally excited CO₂ reacts directly with hydrogen adsorbed on Pd sites while accelerating formate formation due to neighboring Ga sites. Moreover, DFT analysis deduces the key reaction pathway that the decomposition of monodentate formate is promoted by plasma-activated hydrogen species. This work enables the high designability of CO₂ hydrogenation catalysts toward value-added chemicals based on the electrification of chemical processes via NTP.

Shielding Protection by Mesoporous Catalysts for Improving Plasma-Catalytic Ambient Ammonia Synthesis

Plasma catalysis is a promising technology for decentralized small-scale ammonia (NH3) synthesis under mild conditions using renewable energy, and it shows great potential as an alternative to the conventional Haber-Bosch process. To date, this emerging process still suffers from a low NH3 yield due to a lack of knowledge in the design of highly efficient catalysts and the in situ plasma-induced reverse reaction (i.e., NH3 decomposition). Here, we demonstrate that a bespoke design of supported Ni catalysts using mesoporous MCM-41 could enable efficient plasma-catalytic NH3 production at 35 °C and 1 bar with >5% NH3 yield at 60 kJ/L. Specifically, the Ni active sites were deliberately deposited on the external surface of MCM-41 to enhance plasma-catalyst interactions and thus NH3 production. The desorbed NH3 could then diffuse into the ordered mesopores of MCM-41 to be shielded from decomposition due to the absence of plasma discharge in the mesopores of MCM-41, that is, "shielding protection", thus driving the reaction forward effectively. This promising strategy sheds light on the importance of a rational design of catalysts specifically for improving plasma-catalytic processes.

Observation of surface species in plasma-catalytic dry reforming of methane in a novel atmospheric pressure dielectric barrier discharge in situ IR cell

Our in situ operando IR DBD cell makes it possible to study the surface species formed in a plasma-catalytic system.

Direct Observation of Plasma-Stimulated Activation of Surface Species Using Multimodal In Situ/Operando Spectroscopy Combining Polarization-Modulation Infrared Reflection-Absorption Spectroscopy, Optical Emission Spectroscopy, and Mass Spectrometry

Nonthermal plasmas (NTPs) produce reactive chemical environments, including electrons, ions, radicals, and vibrationally excited molecules, that can drive chemistry at temperatures at which such species are thermally inaccessible. There has been growing interest in the integration of conventional catalysis with reactive NTPs to promote novel chemical transformations. Unveiling the full potential of plasma-catalytic processes requires a comprehensive understanding of plasma-catalytic synergies, including characterization of plasma-catalytic surface interactions. In this work, we report on a newly designed multimodal spectroscopic instrument combining polarization-modulation infrared reflection-absorption spectroscopy (PM-IRAS), mass spectrometry, and optical emission spectroscopy (OES) for the investigation of plasma-surface interactions such as those found in plasma catalysis. In particular, this tool has been utilized to correlate plasma-phase chemistry with both surface chemistry and gas-phase products in situ (1) during the deposition of carbonaceous surface species via NTP-promoted nonoxidative coupling of methane and (2) during subsequent activation of surface deposits with an atmospheric pressure and temperature argon plasma jet on both nickel (Ni) and silicon dioxide (SiO₂) surfaces. For the first time, the activation of carbonaceous surface species by a NTP on Ni and SiO₂ surfaces to form hydrogen gas and C₂ hydrocarbons was directly observed, where both PM-IRAS and OES measurements suggest that they may form through different pathways. This unique tool for studying plasma-surface interactions could enable more rational design of plasma-stimulated catalytic processes.

ctc-[Pt(NH3)2(cinnamate)(valproate)Cl2] is a highly potent and low-toxic triple action anticancer prodrug

Pt(iv) prodrugs have gained tremendous attention due to their indisputable advantages compared to cisplatin. Herein, new Pt(iv) derivatives with cinnamic acid at the first axial position, and inhibitor of matrix metalloproteinases-2 and -9, histone deacetylase, cyclooxygenase or pyruvate dehydrogenase at the second axial position are constructed to develop multi-action prodrugs. We demonstrate that Pt(iv) prodrugs are reducible and have superior antiproliferative activity with IC50 values at submicromolar concentrations. Notably, Pt(iv) prodrugs exhibit highly potent anti-tumour activity in an in vivo breast cancer model. Our results support the view that a triple-action Pt(iv) prodrug acts via a synergistic mechanism, which involves the effects of CDDP and the effects of axial moieties, thus jointly leading to the death of tumour cells. These findings provide a practical strategy for the rational design of more effective Pt(iv) prodrugs to efficiently kill tumour cells by enhancing their cellular accumulation and tuning their canonical mechanism.

Unconventional Catalytic Approaches to Ammonia Synthesis

Ammonia is a critically important industrial chemical and is largely responsible for sustaining the growing global population. To provide ammonia to underdeveloped regions and/or regions far from industrial production hubs, modular systems have been targeted and often involve unconventional production methodologies. These novel approaches for ammonia production can tap renewable resources at smaller scales located at the point of use, while decreasing the CO2 footprint. Plasma-assisted catalysis and electrochemical ammonia synthesis have promise owing to their atmospheric pressure and low-temperature operation conditions and the ability to construct units at scales desired for modularization. Fundamental and applied studies are underway to assess these processes, although many unknowns remain. In this review, we discuss recent developments and opportunities for unconventional ammonia synthesis with a focus on plasma-stimulated systems.

The Potential Use of Core-Shell Structured Spheres in a Packed-Bed DBD Plasma Reactor for CO2 Conversion

This work proposes to use core-shell structured spheres to evaluate whether it allows to individually optimize bulk and surface effects of a packing material, in order to optimize conversion and energy efficiency. Different core-shell materials have been prepared by spray coating, using dense spheres (as core) and powders (as shell) of SiO2, Al2O3, and BaTiO3. The materials are investigated for their performance in CO2 dissociation and compared against a benchmark consisting of a packed-bed reactor with the pure dense spheres, as well as an empty reactor. The results in terms of CO2 conversion and energy efficiency show various interactions between the core and shell material, depending on their combination. Al2O3 was found as the best core material under the applied conditions here, followed by BaTiO3 and SiO2, in agreement with their behaviour for the pure spheres. Applying a thin shell layer on the cores showed equal performance between the different shell materials. Increasing the layer thickness shifts this behaviour, and strong combination effects were observed depending on the specific material. Therefore, this method of core-shell spheres has the potential to allow tuning of the packing properties more closely to the application by designing an optimal combination of core and shell.

A design of a fixed bed plasma DRIFTS cell for studying the NTP-assisted heterogeneously catalysed reactions

A newly developed DRIFTS cell for the in situ study of non-thermal plasma-assisted heterogeneously catalysed reactions is presented and evaluated using methane oxidation over a Pd/Al₂O₃ catalyst.

Direct methanol synthesis from methane in a plasma-catalyst hybrid system at low temperature using metal oxide-coated glass beads

A plasma-catalyst hybrid system was used to synthesize methanol directly from methane. A dielectric barrier discharge (DBD) plasma combined with the catalyst was introduced in order to overcome the difficulties of catalyst-only batch reactions such as high reaction pressure and separation of liquid product. Of the transition metal oxides, Mn₂O₃-coated glass bead showed the highest methanol yield of about 12.3% in the plasma-catalyst hybrid system. The reaction temperature was maintained below 100 °C due to the low plasma input power (from 1.3 kJ/L to 4.5 kJ/L). Furthermore, the reactivity of the catalyst was maintained for 10 hr without changing the selectivity. The results indicated that the plasma-induced OH radical might be produced on the Mn₂O₃ catalyst, which led to methanol synthesis.

Engineering of Transition Metal Catalysts Confined in Zeolites

Transition metal-zeolite composites are versatile catalytic materials for a wide range of industrial and lab-scale processes. Significant advances in fabrication and characterization of well-defined metal centers confined in zeolite matrixes have greatly expanded the library of available materials and, accordingly, their catalytic utility. In this review, we summarize recent developments in the field from the perspective of materials chemistry, focusing on synthesis, postsynthesis modification, (operando) spectroscopy characterization, and computational modeling of transition metal-zeolite catalysts.

Probing the Role of a Non-Thermal Plasma (NTP) in the Hybrid NTP Catalytic Oxidation of Methane

Three recurring hypotheses are often used to explain the effect of non‐thermal plasmas (NTPs) on NTP catalytic hybrid reactions; namely, modification or heating of the catalyst or creation of new reaction pathways by plasma‐produced species. NTP‐assisted methane (CH₄) oxidation over Pd/Al₂O₃ was investigated by direct monitoring of the X‐ray absorption fine structure of the catalyst, coupled with end‐of‐pipe mass spectrometry. This in situ study revealed that the catalyst did not undergo any significant structural changes under NTP conditions. However, the NTP did lead to an increase in the temperature of the Pd nanoparticles; although this temperature rise was insufficient to activate the thermal CH₄ oxidation reaction. The contribution of a lower activation barrier alternative reaction pathway involving the formation of CH₃(g) from electron impact reactions is proposed.