Co-assembly of Patchy Polymeric Micelles and Protein Molecules

Polymer-Protein Assemblies with Tunable Vesicular and Hierarchical Nanostructures

The construction of variable structured multi-protein nano-assemblies is of great interest for the development of protein-based therapeutic systems. This study showcases the synthesis of polymer-protein assemblies with tunable structure like single- and multi-layer polymer-crosslinked protein vesicles, Janus protein vesicles and other hierarchical-structured assemblies by utilizing a dynamic template-assistant intermittent-assembly approach. The generalization of the methodology helps the protein assemblies to gain notable functional complexity. And we demonstrate compelling evidence highlighting the substantial impact of the topological morphology of protein nanoaggregates on their cellular uptake capacity.

Polymer Brushes and Surface Nanostructures: Molecular Design, Precise Synthesis, and Self-Assembly

For over two decades, polymer brushes have found wide applications in industry and scientific research. Now, polymer brush research has been a significant research focus in the community of polymer science. In this review paper, we give an introduction to the synthesis, self-assembly, and applications of one-dimensional (1D) polymer brushes on polymer backbones, two-dimensional (2D) polymer brushes on flat surfaces, and three-dimensional (3D) polymer brushes on spherical particles. Examples of the synthesis of polymer brushes on different substrates are provided. Studies on the formation of the surface nanostructures on solid surfaces are also reviewed in this article. Multicomponent polymer brushes on solid surfaces are able to self-assemble into surface micelles (s-micelles). If the s-micelles are linked to the substrates through cleavable linkages, the s-micelles can be cleaved from the substrates, and the cleaved s-micelles are able to self-assemble into hierarchical structures. The formation of the surface nanostructures by coassembly of polymer brushes and "free" polymer chains (coassembly approach) or polymerization-induced surface self-assembly approach, is discussed. The applications of the polymer brushes in colloid and biomedical science are summarized. Finally, perspectives on the development of polymer brushes are offered in this article.

Exploring the Depth-Dependent Microviscosity inside a Micelle Using Butterfly-Motion-Based Fluorescent Probes

The viscosity distribution of micellar interiors from the very center to the outer surface is dramatically varied, which has been distinguished in theoretical models, yet it remains highly challenging to quantify this issue experimentally. Herein, a series of fluorophore-substituted surfactants DPAC-Fn (n = 3, 5, 7, 9, 11, 13, and 15) are developed by functionalizing the different alkyl-trimethylammonium bromides with the butterfly motion-based viscosity sensor, N,N'-diphenyl-dihydrodibenzo[a,c]phenazine (DPAC). The immersion depth of DPAC units of DPAC-Fn in cetrimonium bromide (C16TAB) micelles depends on the alkyl chain lengths n. From deep (n = 15) to shallow (n = 3), DPAC-Fn in C16TAB micelles exhibits efficient viscosity-sensitive dynamic multicolor emissions. With external standards for quantification, the viscosity distribution inside a C16TAB micelle with the size of ∼4 nm is changed seriously from high viscosity (∼190 Pa s) in the core center to low viscosity (∼1 Pa s) near the outer surface. This work provides a tailored approach for powerful micelle tools to explore the depth-dependent microviscosity of micellar interiors.

Evaluation of exogenous therapeutic protein activity under confinement and crowding effects

Dysfunction of intracellular proteins is frequently associated with various diseases, such as cancer. The exogenous proteins in cells are usually assembled with specific configurations due to physiological confinement/crowding to exhibit novel features in the protein structure, folding or conformational stability, distinguished with their behaviors in buffer solutions. Here, we synthesized exogenous proteins under confined/crowded conditions, to explore protein activity within cells. The findings suggested that the confinement and crowding effects on protein activity are heterogeneous; they showed an inhibitory effect on HRP by decreasing Km from ∼9.5- and ∼21.7-fold and Vmax from ∼6.8- and ∼20.2-fold lower than that of dilute solutions. Interestingly, the effects on Cyt C seem to be more complicated, and crowding exerts a positive effect by increasing Km ∼ 3.6-fold and Vmax ∼ 1.5-fold higher than that of dilute solutions; however, confinement exhibits a negative effect by decreasing Km ∼2.0 and Vmax ∼8.3 times. Additionally, in contrast to traditional nanoparticle-based confinement models, we synthesized a biodegradable nanoparticle to mimic the confined space, and the biggest advantage of this novel model is that the particles can be degraded and thus it can provide more intuitive observations of the properties of the target proteins under confinement and after release. Furthermore, we also evaluated protein activity in different cellular environments, indicating that the exogenous protein activity was closely related to the crowdedness of cellular environments, and the inhibition of protein activity in MDA-MB-231 cancer cells was more obvious than in HEK293 normal cells. Finally, SAXS analysis revealed the correlation between the protein conformation and the different environments. Our work will provide a unique method for precisely assessing whether the target cellular environments are native matrix in which specific exogenous protein drugs are delivered to function or whether they display a therapeutic role, which is of great significance for screening and development of new drugs.

Dual size/charge-switchable and multi-responsive gelatin-based nanocluster for targeted anti-tumor therapy

Biopolymers with excellent biocompatibility and biodegradability show great potential for designing drug nanocarriers, while it's difficult to fabricate smart vehicles with multiple switching (size, surface, shape) based on biopolymers alone. Here, we report a dual size/charge-switchable and multi-responsive doxorubicin-loaded gelatin-based nanocluster (DOX-icluster) for improved tumor penetration and targeted anti-tumor therapy. The DOX-icluster was electrostatically assembled from folic acid and dimethylmaleic anhydride modified gelatin (FA-GelDMA) and small-sized DOX-loaded NH₂ modified hollow mesoporous organosilicon nanoparticles (DOX-HMON-NH₂). DOX-icluster had an initial size of about 199 nm at neutral pH. After accumulation in tumor tissue, the DMA bond of FA-GelDMA was cleaved and gelatin was degraded by matrix metalloproteinase (MMP-2), thus 48 nm and positively charged DOX-HMON-NH₂ was released to facilitate penetration and cell internalization. DOX-HMON-NH₂ was further degraded by intracellular glutathione (GSH) with releasing 48.1 % of DOX. The cellular uptake results indicated that the fabricated icluster promoted the uptake of DOX by 4T1 cells. With enhanced penetration efficacy, the tumor spheroids volume treated with DOX-icluster was reduced to 15.1 % on day 7. This cytocompatible multi-responsive gelatin-based icluster with size-shrinking and charge-reversible characteristics may be used as a significant drug carrier for tumor therapy.

Surface Coassembly of Binary Mixed Polymer Brushes and Linear Block Copolymer Chains

Binary mixed polymer brushes (BMPBs) are two different homopolymer chains that are covalently anchored to the solid surfaces at high grafting densities. One feature of the BMPBs is the unique ability to make surface phase separation under external stimuli. In this research, we demonstrate that different surface nanostructures can be fabricated by surface coassembly of BMPBs and free block copolymer (BCP) chains. Polystyrene/poly(2-(dimethylamino)ethyl methacrylate) (PS/PDMAEMA) BMPBs on silica particles (PS-PDMAEMA-SiO₂) are synthesized by a two-step "grafting to" approach. PDMAEMA-b-PS block copolymer (BCP) chains and PS-PDMAEMA-SiO₂ make surface self-assembly and a variety of surface nanostructures are formed in methanol. The grafting densities of PS and PDMAEMA brushes, solvent, and the BCP structures all exert significant influences on the surface morphology. With an increase in PDMAEMA grafting density, the surface structures change from perforated layers, to rods, and to spherical surface micelles (s-micelles). The PS grafting density also exerts an effect on the formation of the surface nanostructures. At low PS grafting density, sparsely distributed s-micelles are produced, and at high density, densely distributed s-micelles are observed. Based on transmission electron microscopy and scanning electron microscopy results, a surface phase diagram is constructed, which provides a guide to the surface morphology control.

Different Methods and Formulations of Drugs and Vaccines for Nasal Administration

Nasal drug delivery is advantageous when compared with other routes of drug delivery as it avoids the hepatic first-pass effect, blood–brain barrier penetration, and compliance issues with parenteral administration. However, nasal administration also has some limitations, such as its low bioavailability due to metabolism on the mucosal surface, and irreversible damage to the nasal mucosa due to the ingredients added into the formula. Moreover, the method of nasal administration is not applicable to all drugs. The current review presents the nasal anatomy and mucosal environment for the nasal delivery of vaccines and drugs, as well as presents various methods for enhancing nasal absorption, and different drug carriers and delivery devices to improve nasal drug delivery. It also presents future prospects on the nasal drug delivery of vaccines and drugs.

Real-Space Image of Charged Patches in Tunable-Size Nanocrystals

The remarkable dual nature of faceted-charge patchy metal fluoride nanocrystals arises from the spontaneous selective coordination of anionic and cationic ligands on the different facets of the nanocrystals. In previous studies, the identification and origin of the charge at the patches were obtained by combining computer simulations with indirect experimental evidence. Taking a step further, we report herein the first direct real-space identification by Kelvin probe force microscopy of the predicted faceted-charge patchy behavior, allowing the image of the dual faceted-charge surfaces. High-resolution transmission electron microscopy reveals the detailed nanocrystal faceting and allows unambiguously inferring the hydrophilic or hydrophobic role of each facet from the identification of the surface atoms exposed at the respective crystallographic planes. The success of the study lies in a foresighted synthesis methodology designed to tune the nanocrystal size to be suitable for microscopy studies and demanding applications.

Preparation of hyaluronic acid-coated polymeric micelles for nasal vaccine delivery

Hyaluronic acid (HA)-coated biodegradable polymeric micelles were developed as nanoparticulate vaccine delivery systems to establish an effective nasal vaccine. We previously reported HA-coated micelles prepared by forming a polyion complex...

Dynamic nanoassembly-based drug delivery system (DNDDS): Learning from nature

Dynamic nanoassembly-based drug delivery system (DNDDS) has evolved from being a mere curiosity to emerging as a promising strategy for high-performance diagnosis and/or therapy of various diseases. However, dynamic nano-bio interaction between DNDDS and biological systems remains poorly understood, which can be critical for precise spatiotemporal and functional control of DNDDS in vivo. To deepen the understanding for fine control over DNDDS, we aim to explore natural systems as the root of inspiration for researchers from various fields. This review highlights ingenious designs, nano-bio interactions, and controllable functionalities of state-of-the-art DNDDS under endogenous or exogenous stimuli, by learning from nature at the molecular, subcellular, and cellular levels. Furthermore, the assembly strategies and response mechanisms of tailor-made DNDDS based on the characteristics of various diseased microenvironments are intensively discussed. Finally, the current challenges and future perspectives of DNDDS are briefly commented.

Polymerization-induced proteinosome formation

In recent years, the fabrication of well-organized proteinosomes has been a popular topic due to the potential applications of the structures in materials science and nanotechnology. A big challenge in the fabrication of proteinosomes is to maintain the structures and the functionalities of proteins on the proteinosomes. In this research, a new concept of polymerization-induced formation of proteinosomes is proposed. In thermal dispersion polymerization of N-isopropyl acrylamide (NIPAM) in the presence of bovine serum albumin (BSA), the growing PNIPAM chains experience phase transition from hydrated coils to dehydrated globules, and the dehydrated PNIPAM chains have hydrophobic interaction with BSA, leading to the formation of hollow proteinosomes. Kinetics studies indicate that there is a transition from the homogeneous polymerization of NIPAM in solution to the heterogeneous polymerization in the proteinosomes. Transmission electron microscopy, atomic force microscopy, confocal laser scanning microscopy and dynamic light scattering all demonstrate the formation of hollow structures. The results of circular dichroism spectroscopy indicate that the secondary structure of BSA remains unchanged in the polymerization process. The formation of proteinosomes is reversible. Upon cooling of the solution to a temperature below the phase transition temperature of PNIPAM, the proteinosomes are dissociated due to the absence of the hydrophobic interaction. The proteinosomes can be used in the encapsulation of hydrophilic compounds in aqueous solution. In this research, not only BSA but also ovalbumin (OVA) is used as a model protein for the fabrication of proteinosomes by the polymerization-induced approach.

Janus Surface Micelles on Silica Particles: Synthesis and Application in Enzyme Immobilization

In these years, synthesis and applications of Janus structures have aroused great interest for large-scale applications in chemistry and materials science. Up to now, Janus particles with different morphologies and different functionalities have been synthesized in solutions, but the synthesis of Janus particles on solid surfaces has not been touched. In this research, Janus surface micelles (JSMs) are fabricated on the surfaces of silica particles by polymerization induced surface self-assembly (PISSA) approach, and the JSMs are used for enzyme immobilization. Usually, enzyme immobilization should be able to optimize the performance of the immobilized enzymes, and an ideal immobilization system must offer protection to the immobilized enzyme with retained bioactivity. Herein, it is demonstrated that JSMs on silica particles can be used as an ideal platform for the immobilization of enzymes. To prepare JSMs, poly(2-(dimethylamino) ethyl methacrylate) macro chain transfer agent (PDMAEMA-CTA) brushes on silica particles and poly(di(ethylene glycol) methyl ether methacrylate) macro CTA (PDEGMA-CTA) are employed in reversible addition-fragmentation chain transfer dispersion polymerization of styrene. After polymerization, JSMs with polystyrene cores and PDMAEMA/PDEGMA patches on the surfaces are prepared on silica particles. After quaternization reaction, the quaternized PDMAEMA patches are used for the immobilization of enzymes. Experimental results turn out that enhanced bioactivities of the immobilized enzymes are achieved and the enzyme molecules are well protected by surface Janus structures.

Biosurfaces Fabricated by Polymerization-Induced Surface Self-Assembly

Surface biofunctionalization provides an approach to the fabrication of surfaces with improved biological and clinical performances. Biosurfaces have found increasing applications in many areas such as sensing, cell growth, and disease detection. Efficient synthesis of biosurfaces without damages to the structures and functionalities of biomolecules is a great challenge. Polymerization-induced surface self-assembly (PISSA) provides an effective approach to the synthesis of surface nanostructures with different compositions, morphologies, and properties. In this research, application of PISSA in the fabrication of biosurfaces is investigated. Two different reversible addition-fragmentation chain transfer (RAFT) agents, RAFT chain transfer agent (CTA) on silica particles (SiO₂-CTA) and CTA on bovine serum albumin (BSA-CTA), were employed in RAFT dispersion polymerization of N-isopropylacrylamide (NIPAM) in water at a temperature above the lower critical solution temperature (LCST) of poly-(isopropylacrylamide) (PNIPAM). After polymerization, PNIPAM layers with BSA on the top surfaces are fabricated on the surfaces of silica particles. Transmission electron microscopy results show that the average PNIPAM layer thickness increases with monomer conversion. Kinetics study indicates that there is a turn point on a plot of ln([M]₀/[M]_t) versus polymerization time. After the critical point, surface coassembly of PNIPAM brushes and BSA-PNIPAM bioconjugates is performed on the silica particles. The secondary structure and the activity of BSA immobilized on top of the PNIPAM layers are basically kept unchanged in the PISSA process. To prepare permanently immobilized protein surfaces, PNIPAM layers on silica particles are cross-linked. BSA on the top surfaces presents a reversible "on-off" switching property. At a temperature below the LCST of PNIPAM, the activity of the immobilized BSA is retained; however, the BSA activity decreases significantly at a temperature above the LCST because of the hydrophobic interaction between PNIPAM and BSA. Based on this approach, many different biosurfaces can be fabricated and the materials will find applications in many fields, such as enzyme immobilization, drug delivery, and tissue engineering.

Electrostatic assisted fabrication and dissociation of multi-component proteinosomes

Self-assembly of proteins into well-organized proteinosomes has attracted great interest due to the potential medical and biological applications of the structures. Herein, a new concept of electrostatic assisted fabrication of proteinosomes is proposed. The self-assembly is performed by using multi-step dialysis approach, where negatively charged bovine serum albumin-poly(N-isopropylacrylamide) (BSA-PNIPAM) bioconjugate and positively charged enzyme (lysozyme or trypsin) are initially dissolved in phosphate buffer (PB) solution at a high salt concentration, and subsequently the protein solution is dialyzed against PB solutions at low salt concentrations, resulting in the formation of biofunctional proteinosomes. Transmission electron microscopy (TEM), cryo-TEM and light scattering results all demonstrate the formation of hollow structures. The wall of a proteinosome is composed of BSA and enzyme (lysozyme or trypsin), and PNIPAM chains of the bioconjugate are in the corona stabilizing the structure. In comparison with the native enzymes, the enzyme molecules in the assemblies basically retain their bioactivities. The proteinosomes formed by BSA-PNIPAM and lysozyme can be dissociated in the presence of trypsin, and those self-assembled by BSA-PNIPAM and trypsin are able to be self-hydrolyzed, resulting in the dissociation of the structures in aqueous solution. The size and morphology changes of the proteinosomes in the hydrolysis are studied.

Multivalent Patchy Colloids for Quantitative 3D Self-Assembly Studies

We report methods to synthesize sub-micron- and micron-sized patchy silica particles with fluorescently labeled hemispherical titania protrusions, as well as routes to efficiently characterize these particles and self-assemble these particles into non-close-packed structures. The synthesis methods expand upon earlier work in the literature, in which silica particles packed in a colloidal crystal were surface-patterned with a silane coupling agent. Here, hemispherical amorphous titania protrusions were successfully labeled with fluorescent dyes, allowing for imaging by confocal microscopy and super-resolution techniques. Confocal microscopy was exploited to experimentally determine the numbers of protrusions per particle over large numbers of particles for good statistical significance, and these distributions were compared to simulations predicting the number of patches as a function of core particle polydispersity and maximum separation between the particle surfaces. We self-assembled these patchy particles into open percolating gel networks by exploiting solvophobic attractions between the protrusions.

Synthesis of poly(acrylic acid) coated magnetic nanospheres via a multiple polymerization route

Magnetic nanospheres are versatile candidates for both fundamental and practical applications. Before they are applied in more complicated fields, their surface must be modified by several functionalities. However, the surface modification can be affected by the magnetic nanoparticles (MNP) embedded in the polymer matrix. Herein, the synthesis of poly(acrylic acid) coated magnetic nanospheres via a multiple polymerization route is described. During the synthesis process, seed emulsion polymerization was applied to redistribute the MNP in the polymer matrix, and the relationship between the structure of magnetic nanospheres and the thickness of the grafted poly(acrylic acid) layer was investigated. The development of size, morphology and magnetic properties of the nanospheres were characterized by transmission electron microscopy, dynamic light scattering, thermogravimetric analysis, X-ray diffraction and vibrating sample magnetometry. This work would pave the way to design and preparation of new structure of functional magnetic nanospheres with precise surface modification.

Surface Reconstruction by a Coassembly Approach

Materials with switchable surfaces, capable of changing surface properties under external stimuli, are playing a pivotal role in many applications, such as tissue engineering, biosensors, and drug/protein delivery. In this research silica particles with patterned and switchable surfaces are fabricated. Surface micelles on silica particles are formed by coassembly of polymer brushes and "free" block copolymer chains in a selective solvent. The cores of the surface micelles are crosslinked by anthracene photodimerization. After quaternization of the coronae, amphiphilic surface micelles are prepared. The surface micelles are able to rearrange in different media. After treatment with an organic solvent, the surfaces of silica particles are occupied by hydrophobic polymer components; in aqueous solution, the positively charged polymer chains are on the surfaces. The switching of the surface micelles results in changes in surface composition and wetting behaviors.

Artificial Cellulosome Complex from the Self-Assembly of Ni-NTA-Functionalized Polymeric Micelles and Cellulases

Polymer-protein core-shell nanoparticles have been explored for enzyme immobilization. This work reports on the development of functional polymeric micelles for immobilizing His6 -tagged cellulases with controlled spatial orientation of enzymes, resulting in "artificial cellulosomes" for effective cellulose hydrolysis. Poly(styrene)-b-poly(styrene-alt-maleic anhydride) was prepared through one-pot reversible addition-fragmentation chain-transfer polymerization and modified with nitrilotriacetic acid (NTA) to afford an amphiphilic block copolymer. The self-assembled polymer was mixed with a solution of NiSO4 to form Ni-NTA-functionalized micelles, which could successfully capture His6 -tagged cellulases and form hierarchically structured core-shell nanoparticles with cellulases as the corona. Because the anchored enzymes are site-specifically oriented and in close proximity, synergistic catalysis that results in over twofold activity enhancement has been achieved.

Biomolecules Turn Self-Assembling Amphiphilic Block Co-polymer Platforms Into Biomimetic Interfaces

Biological membranes constitute an interface between cells and their surroundings and form distinct compartments within the cell. They also host a variety of biomolecules that carry out vital functions including selective transport, signal transduction and cell-cell communication. Due to the vast complexity and versatility of the different membranes, there is a critical need for simplified and specific model membrane platforms to explore the behaviors of individual biomolecules while preserving their intrinsic function. Information obtained from model membrane platforms should make invaluable contributions to current and emerging technologies in biotechnology, nanotechnology and medicine. Amphiphilic block co-polymers are ideal building blocks to create model membrane platforms with enhanced stability and robustness. They form various supramolecular assemblies, ranging from three-dimensional structures (e.g., micelles, nanoparticles, or vesicles) in aqueous solution to planar polymer membranes on solid supports (e.g., polymer cushioned/tethered membranes,) and membrane-like polymer brushes. Furthermore, polymer micelles and polymersomes can also be immobilized on solid supports to take advantage of a wide range of surface sensitive analytical tools. In this review article, we focus on self-assembled amphiphilic block copolymer platforms that are hosting biomolecules. We present different strategies for harnessing polymer platforms with biomolecules either by integrating proteins or peptides into assemblies or by attaching proteins or DNA to their surface. We will discuss how to obtain synthetic structures on solid supports and their characterization using different surface sensitive analytical tools. Finally, we highlight present and future perspectives of polymer micelles and polymersomes for biomedical applications and those of solid-supported polymer membranes for biosensing.

Bioassemblies Fabricated by Coassembly of Protein Molecules and Monotethered Single-Chain Polymeric Nanoparticles

Molecular nanoparticles have been used as building blocks in the synthesis of functional materials. The grand challenges in the synthesis of the functional materials are precise control of the structures and functionalities of the materials by using nanoparticles with different architectures and properties. Monotethered single-chain polymeric nanoparticles (SCPN) are a type of nanosized asymmetric particles formed by intramolecular cross-linking of linear diblock copolymer chains. Monotethered SCPNs can be used as elemental building blocks for the fabrication of well-defined advanced structures. In this research, synthesis of biohybrid materials based on coassembly of bovine serum albumin (BSA) molecules and monotethered SCPNs is investigated. Due to the asymmetric structure of the SCPNs, positively charged SCPNs and negatively charged protein molecules coassemble into biohybrid vesicles with SCPNs on the layers and protein molecules in the walls. The self-assembled structures were analyzed by using dynamic light scattering, transmission electron microscopy, cryo-transmission electron microscopy, and atomic force microscopy. The average size of the biohybrid vesicles can be controlled by the molar ratio of SCPNs to BSA. The protein molecules in the biohybrid vesicles maintain most of the activities. This research paves a new way for the synthesis of functional biohybrid structures, and the materials can be used as protein carriers.

Compartmentalization and Unidirectional Cross-Domain Molecule Shuttling of Organometallic Single-Chain Nanoparticles

Compartmentalization and unidirectional cross-domain molecule shuttling are omnipresent in proteins, and play key roles in molecular recognition, enzymatic reaction, and other living functions. Nanomachinery design emulating these biological functions is being considered as one of the most ambitious and challenging tasks in modern chemistry and nanoscience. Here, we present a biomimetic nanomachinery design using single-chain technology. Stepwise complex of the outer blocks of water-soluble linear ABC triblock terpolymer to copper ions yields dumbbell-shaped single-chain nanoparticle. A novel nanomachine capable of compartmentalization and unidirectional cross-domain molecule shuttling has been achieved upon ascorbic acid reduction, leading to synergistically donating/accepting copper centers between discrete double heads, overall dumbbell-to-tadpole configurational transition, and intake of oxidized ascorbic acid into reconstructed head. Subsequent air oxidation results in the inverse molecule shuttling and configurational transition processes. This is the first demonstration of biomimetic nanomachinery design that is capable of compartmentalization and unidirectional cross-domain molecule shuttling, exemplified simply using a new single-chain technology.

Fabrication of Polymer-Protein Hybrids

Rapid developments in organic chemistry and polymer chemistry promote the synthesis of polymer-protein hybrids with different structures and biofunctionalities. In this feature article, recent progress achieved in the synthesis of polymer-protein conjugates, protein-nanoparticle core-shell structures, and polymer-protein nanogels/hydrogels is briefly reviewed. The polymer-protein conjugates can be synthesized by the "grafting-to" or the "grafting-from" approach. In this article, different coupling reactions and polymerization methods used in the synthesis of bioconjugates are reviewed. Protein molecules can be immobilized on the surfaces of nanoparticles by covalent or noncovalent linkages. The specific interactions and chemical reactions employed in the synthesis of core-shell structures are discussed. Finally, a general introduction to the synthesis of environmentally responsive polymer-protein nanogels/hydrogels by chemical cross-linking reactions or molecular recognition is provided.

Co-initiated hyperbranched-polydendron building blocks for the direct nanoprecipitation of dendron-directed patchy particles with heterogeneous surface functionality

A synthetic strategy branched polymer building blocks that allow the rapid construction of patchy nanoparticles is presented. Hyperbranched polydendrons with mixtures of PEG and thiol-functional dendrons nanoprecipitate to form isolated zones that are imaged with gold nanoparticles.

Synthesis of Low-Dimensional Polyion Complex Nanomaterials via Polymerization-Induced Electrostatic Self-Assembly

Nanostructured polyion complexes (PICs) are appealing in biomaterials applications. Yet, conventional assembly suffers from the weakness in scale-up and reproducibility. Only a few low-dimensional PICs are available to date. Herein we report an efficient and scalable strategy to prepare libraries of low-dimensional PICs. It involves a visible-light-mediated RAFT polymerization of ionic monomer in the presence of a polyion of the opposite charge at 5-50 % w/w total solids concentration in water at 25 °C, namely, polymerization-induced electrostatic self-assembly (PIESA). A Vesicle, multi-compartmental vesicle, and large-area unilamellar nanofilm can be achieved in water. A long nanowire and porous nanofilm can be prepared in methanol/water. An unusual unimolecular polyion complex (uPIC)-sphere-branch/network-film transition is reported. This green chemistry offers a general platform to prepare various low-dimensional PICs with high reproducibility on a commercially viable scale under eco-friendly conditions.