Preorganization and Cooperation for Highly Efficient and Reversible Capture of Low-Concentration CO2 by Ionic Liquids

Intermolecular Proton Transfer Enabled Reactive CO2 Capture by the Malononitrile Anion

Task-specific ionic liquids (ILs) employing carbanions represent a new class of ILs for carbon capture. The deprotonated malononitrile carbanion, [CH(CN)2]-, has shown close to equimolar capacity for reactive CO2 capture. Although the formation of the [C(CN)2COOH]- carboxylic acid was found to be the final product, how the hydrogen atom on the [CH(CN)2]- carbanion transfers to the carboxylate group as a proton has not been fully understood. In this work, we employ density functional theory calculations with an implicit solvation model to investigate the proton transfer mechanisms in forming carboxylic acid from the reaction of the [CH(CN)2]- carbanion with CO2. We find that the intramolecular proton-transfer pathway in [CH(CN)2COO]- to form [C(CN)2COOH]- is unlikely due to the high energy barrier of 152 kJ/mol. Instead, the intermolecular proton transfer pathway between two [CH(CN)2COO]- anions is more feasible to form two molecules of [C(CN)2COOH]-, with a significantly lower activation energy of 50 kJ/mol. Moreover, the [C(CN)2COOH]- dimer is further stabilized by the intermolecular hydrogen bonds of the two -COOH groups in the Z-configuration of the π-conjugated planar geometry. This insight of reactive CO2 capture enabled by intermolecular proton transfer will be useful in designing novel carbanions and ILs for carbon capture and conversion.

Ionic Lignin Polymers for Controlled CO2 Capture, Release, and Conversion into High-Value Chemicals

In this study, an innovative and cost-effective ionic polymer for CO2 capture and utilization for the first time, using abundant and nonfood-based biomass lignin is reported. The modified ionic polymer synthesizes through the reaction of glycidyltrimethylammonium chloride with lignin under alkaline conditions to yield quaternary ammonium ionic functionality. Subsequently, the hydroxide-based pure ionic lignin polymer is employed for CO2 capture from both direct air and concentrated CO2 sources at room temperature and atmospheric pressure. Structural characterization of the polymers is accomplished through 1H, 13C, and 2D-heteronuclear single quantum coherence (HSQC) NMR, and FT-IR spectroscopy. The CO2 capture process is established through the formation of bicarbonate ions alongside the presence of CO2. The captured CO2 is precisely quantified by using inverse-gated proton decoupled 13C NMR with an internal standard (trioxane). Remarkably, the captured-CO2 amounts of ionic lignin polymer are 1.06 mmol g-1 (47 mg g-1) from concentrated-CO2 source and 0.60 mmol g-1 (26 mg g-1) from direct-air. The captured-CO2 in ionic lignin polymer is released in controlled manner and utilized in the synthesis of cyclic carbonate, showcasing the productive application of the captured carbon. Moreover, the fully controlled recovering of ionic lignin polymer achieves via repeated CO2 release ↔ CO2 capture.

Reactive capture and electrochemical conversion of CO2 with ionic liquids and deep eutectic solvents

Ionic liquids (ILs) and deep eutectic solvents (DESs) have tremendous potential for reactive capture and conversion (RCC) of CO2 due to their wide electrochemical stability window, low volatility, and high CO2 solubility. There is environmental and economic interest in the direct utilization of the captured CO2 using electrified and modular processes that forgo the thermal- or pressure-swing regeneration steps to concentrate CO2, eliminating the need to compress, transport, or store the gas. The conventional electrochemical conversion of CO2 with aqueous electrolytes presents limited CO2 solubility and high energy requirement to achieve industrially relevant products. Additionally, aqueous systems have competitive hydrogen evolution. In the past decade, there has been significant progress toward the design of ILs and DESs, and their composites to separate CO2 from dilute streams. In parallel, but not necessarily in synergy, there have been studies focused on a few select ILs and DESs for electrochemical reduction of CO2, often diluting them with aqueous or non-aqueous solvents. The resulting electrode-electrolyte interfaces present a complex speciation for RCC. In this review, we describe how the ILs and DESs are tuned for RCC and specifically address the CO2 chemisorption and electroreduction mechanisms. Critical bulk and interfacial properties of ILs and DESs are discussed in the context of RCC, and the potential of these electrolytes are presented through a techno-economic evaluation.

An environmentally friendly deep eutectic solvent for CO2 capture

A leading cause of global warming is the increase of carbon dioxide (CO2) emissions due to anthropogenic activities which prompts an urgent need for substantial reduction. Recently, CO2 absorption in deep eutectic solvents (DESs) has attracted scientific attention, because of their adaptability compared to traditional ionic liquids and aqueous amine solutions. This study employs the heating method to synthesize DESs using tetrapropylammonium bromide (TPAB) and formic acid (Fa) with molar ratios of TPAB-Fa (1:1) and TPAB-Fa (1:2). Absorption experiments by static method quantified CO2 solubility in the DESs under varied pressures and temperatures. TPAB-Fa (1:2) at 25.0 °C was the most efficient with the CO2 solubility of 0.218. Thermodynamic modeling was performed by employing the nonrandom two liquids activity coefficient model and the Peng-Robinson equation of state for the liquid and gas phases, respectively. The Henry's law constant was determined from experimental data. CO2 physical absorption was confirmed via nuclear magnetic resonance (NMR) and Fourier-transform infrared (FT-IR) analyses. TPAB-Fa (1:2), as the superior DES, exhibited regeneration efficiency of 99% after five absorption/desorption cycles.

Conversion of atmospheric CO2 catalyzed by thiolate-based ionic liquids under mild conditions: efficient synthesis of 2-oxazolidinones

Thiolate-based ionic liquids, specifically the catalyst [TBP][2-Tp], have demonstrated their efficiency in catalyzing the reaction of CO2 with propargylic amine. This novel synthetic method can be used to synthesize various 2-oxazolidinone derivatives with high yields. The catalyst can be easily regenerated and reused without any decline in its catalytic activity. Experimental and spectroscopic investigations have confirmed that the high activity of [TBP][2-Tp] is attributed to the synergistic effect of its S and N sites in activating CO2, rather than depending solely on basicity to activate the amino group of propargylic amine. These findings highlight the significant potential of thiolate-based ionic liquids for applications in CO2 activation and conversion.

Unveiling protic amino acid ionic liquids for the efficient capture of carbon dioxide

A series of novel protic amino acid ionic liquids (PAAILs) are designed and synthesized for the first time through acid-base neutralization and an ion exchange reaction. Among the synthesised PAAILs, the [DBNH][Maba] PAAIL has the largest CO2 absorption capacity of 0.78 mol mol-1 (0.142 g g-1) at 313.2 K. The PAAILs are found to be efficient, reversible, and selective CO2 absorbents.

Bioinspired Hydrophobicity for Enhancing Electrochemical CO2 Reduction

Electrochemical carbon dioxide reduction (CO2 R) is a promising pathway for converting greenhouse gasses into valuable fuels and chemicals using intermittent renewable energy. Enormous efforts have been invested in developing and designing CO2 R electrocatalysts suitable for industrial applications at accelerated reaction rates. The microenvironment, specifically the local CO2 concentration (local [CO2 ]) as well as the water and ion transport at the CO2 -electrolyte-catalyst interface, also significantly impacts the current density, Faradaic efficiency (FE), and operation stability. In nature, hydrophobic surfaces of aquatic arachnids trap appreciable amounts of gases due to the "plastron effect", which could inspire the reliable design of CO2 R catalysts and devices to enrich gaseous CO2 . In this review, starting from the wettability modulation, we summarize CO2 enrichment strategies to enhance CO2 R. To begin, superwettability systems in nature and their inspiration for concentrating CO2 in CO2 R are described and discussed. Moreover, other CO2 enrichment strategies, compatible with the hydrophobicity modulation, are explored from the perspectives of catalysts, electrolytes, and electrolyzers, respectively. Finally, a perspective on the future development of CO2 enrichment strategies is provided. We envision that this review could provide new guidance for further developments of CO2 R toward practical applications.

Ingenious Artificial Leaf Based on Covalent Organic Framework Membranes for Boosting CO2 Photoreduction

Covalent organic frameworks (COFs) hold the potential in converting CO₂ with water into value-added fuels and O₂ to save the deteriorating ecological environment. However, reaching high yield and selectivity is a grand challenge under metal-, photosensitizer-, or sacrificial reagent-free conditions. Here, inspired by microstructures of natural leaves, we designed triazine-based COF membranes with the integration of steady light-harvesting sites, efficient catalytic center, and fast charge/mass transfer configuration to fabricate a novel artificial leaf for the first time. Significantly, a record high CO yield of 1240 μmol g^-1 in a 4 h reaction, approximately 100% selectivity, and a long lifespan (at least 16 cycles) were achieved under gas-solid conditions without using any metal, photosensitizer, or sacrificial reagent. Unlike the existing knowledge, the chemical structural unit of triazine-imide-triazine and the unique physical form of the COF membrane are predominant for such a remarkable photocatalysis. This work opens a new pathway to simulating photosynthesis in leaves and may motivate relevant research in the future.

Porous Polymer Supported Amino Functionalized Ionic Liquid for Effective CO2 Capture

A decrease in CO₂ emissions is urgently required in the present situation due to the fast growth of carbon dioxide (CO₂) in the atmosphere, which has caused a series of global climate issues. This study used an impregnation-evaporation method to immobilize an amino functionalized ionic liquid [C₂OHmim][Lys] on a chromatographic column filler GDX-103 and create a novel supported ionic liquid. The results showed that the supported ionic liquid with 60 wt % ionic liquid content had the best adsorption performance at 40 °C, and the CO₂ adsorption isotherm showed that the adsorption capacity at 0.1 MPa was 1.29 mmol CO₂/g sorbent, which was 6 times greater than the adsorption capacity of the pure carrier. The sample with 60% ionic liquid content has an adsorption capacity of 1.02 mmol CO₂/g sorbent under the condition of CO₂/N₂ mixed gas with 10% CO₂ content. This is 43 times greater than the adsorption capacity of the pure carrier, and its adsorption performance is stable after three adsorption and desorption cycles. Through the rich porous structure of GDX-103, the ionic liquid is effectively supported and dispersed, which expands the contact area between CO₂ and ionic liquid and enhances the mass transfer of CO₂. At the same time, CO₂ can be chemically bound to the groups on the anion of ionic liquid and be immobilized, so it has a high selective adsorption capacity of CO₂, which makes it a great alternative to traditional CO₂ adsorbents.

Emerging trends in direct air capture of CO2: a review of technology options targeting net-zero emissions

The increasing concentration of carbon dioxide (CO2) in the atmosphere has compelled researchers and policymakers to seek urgent solutions to address the current global climate change challenges. In order to keep the global mean temperature at approximately 1.5 °C above the preindustrial era, the world needs increased deployment of negative emission technologies. Among all the negative emissions technologies reported, direct air capture (DAC) is positioned to deliver the needed CO2 removal in the atmosphere. DAC technology is independent of the emissions origin, and the capture machine can be located close to the storage or utilization sites or in a location where renewable energy is abundant or where the price of energy is low-cost. Notwithstanding these inherent qualities, DAC technology still has a few drawbacks that need to be addressed before the technology can be widely deployed. As a result, this review focuses on emerging trends in direct air capture (DAC) of CO2, the main drivers of DAC systems, and the required development for commercialization. The main findings point to undeniable facts that DAC's overall system energy requirement is high, and it is the main bottleneck in DAC commercialization.

Tuning Ionic Liquid-Based Catalysts for CO2 Conversion into Quinazoline-2,4(1H,3H)-diones

Carbon capture and storage (CCS) and carbon capture and utilization (CCU) are two kinds of strategies to reduce the CO2 concentration in the atmosphere, which is emitted from the burning of fossil fuels and leads to the greenhouse effect. With the unique properties of ionic liquids (ILs), such as low vapor pressures, tunable structures, high solubilities, and high thermal and chemical stabilities, they could be used as solvents and catalysts for CO2 capture and conversion into value-added chemicals. In this critical review, we mainly focus our attention on the tuning IL-based catalysts for CO2 conversion into quinazoline-2,4(1H,3H)-diones from o-aminobenzonitriles during this decade (2012~2022). Due to the importance of basicity and nucleophilicity of catalysts, kinds of ILs with basic anions such as [OH], carboxylates, aprotic heterocyclic anions, etc., for conversion CO2 and o-aminobenzonitriles into quinazoline-2,4(1H,3H)-diones via different catalytic mechanisms, including amino preferential activation, CO2 preferential activation, and simultaneous amino and CO2 activation, are investigated systematically. Finally, future directions and prospects for CO2 conversion by IL-based catalysts are outlined. This review is benefit for academic researchers to obtain an overall understanding of the synthesis of quinazoline-2,4(1H,3H)-diones from CO2 and o-aminobenzonitriles by IL-based catalysts. This work will also open a door to develop novel IL-based catalysts for the conversion of other acid gases such as SO2 and H2S.

Covalent Organic Frameworks with Ionic Liquid-Moieties (ILCOFs): Structures, Synthesis, and CO2 Conversion

CO₂, an acidic gas, is usually emitted from the combustion of fossil fuels and leads to the formation of acid rain and greenhouse effects. CO₂ can be used to produce kinds of value-added chemicals from a viewpoint based on carbon capture, utilization, and storage (CCUS). With the combination of unique structures and properties of ionic liquids (ILs) and covalent organic frameworks (COFs), covalent organic frameworks with ionic liquid-moieties (ILCOFs) have been developed as a kind of novel and efficient sorbent, catalyst, and electrolyte since 2016. In this critical review, we first focus on the structures and synthesis of different kinds of ILCOFs materials, including ILCOFs with IL moieties located on the main linkers, on the nodes, and on the side chains. We then discuss the ILCOFs for CO₂ capture and conversion, including the reduction and cycloaddition of CO₂. Finally, future directions and prospects for ILCOFs are outlined. This review is beneficial for academic researchers in obtaining an overall understanding of ILCOFs and their application of CO₂ conversion. This work will open a door to develop novel ILCOFs materials for the capture, separation, and utilization of other typical acid, basic, or neutral gases such as SO₂, H₂S, NOx, NH₃, and so on.

Tuning Functionalized Ionic Liquids for CO2 Capture

The increasing concentration of CO₂ in the atmosphere is related to global climate change. Carbon capture, utilization, and storage (CCUS) is an important technology to reduce CO₂ emissions and to deal with global climate change. The development of new materials and technologies for efficient CO₂ capture has received increasing attention among global researchers. Ionic liquids (ILs), especially functionalized ILs, with such unique properties as almost no vapor pressure, thermal- and chemical-stability, non-flammability, and tunable properties, have been used in CCUS with great interest. This paper focuses on the development of functionalized ILs for CO₂ capture in the past decade (2012~2022). Functionalized ILs, or task-specific ILs, are ILs with active sites on cations or/and anions. The main contents include three parts: cation-functionalized ILs, anion-functionalized ILs, and cation-anion dual-functionalized ILs for CO₂ capture. In addition, classification, structures, and synthesis of functionalized ILs are also summarized. Finally, future directions, concerns, and prospects for functionalized ILs in CCUS are discussed. This review is beneficial for researchers to obtain an overall understanding of CO₂-philic ILs. This work will open a door to develop novel IL-based solvents and materials for the capture and separation of other gases, such as SO₂, H₂S, NOx, NH₃, and so on.

Energy-Efficient Biphasic Solvents for Industrial Carbon Capture: Role of Physical Solvents on CO2 Absorption and Phase Splitting

Physical solvent is a promising alternative for the phase splitting of solvent to drastically reduce the regeneration energy during CO₂ capture. Here, an aqueous biphasic solvent, optimally composed of 30 wt % polyamine (N, N-dimethylpropylamine, DMPA) and 50 wt % physical solvent (polyethyleneglycol dimethyl ether, NHD), is prepared, which presents high cyclic loading, low regeneration energy, and good stability. L₁₆(4⁵) orthogonal tests are performed to comprehensively evaluate the mass-transfer kinetics and the effect of crucial conditions, verifying the weak effect of NHD solvent on mass transfer. The solvent effect of NHD could decrease the energy barrier of carbamate generation from zwitterions (DMPA⁺COO^-) to enhance chemical absorption. The low polarity of the NHD solvent provides source motivation and accelerates phase splitting. Time-space resolution distribution of CO₂ capacity is established based on a scale-up separator with 5 L solvent, which supports multiscale force analysis for the various stages during phase splitting. The drag force of the homogeneous cluster was first introduced into separation dynamics, referred to as an important reason for the various splitting behaviors of a scale-up separator.

Molecular structure-tuned stability and switchability of CO2-responsive oil-in-water emulsions

HYPOTHESIS

Pseudo-Gemini surfactants (PGS) possessing switchable and recyclable features have drawn increasing attention on generating high-performance CO₂-responsive emulsions for wide range and versatile applications. However, there is a lack of fundamental understanding on how the molecular structure of PGS affects the stability and switchability of emulsions. We hypothesize that the length and type of the spacer in PGS play a decisive role in controlling interfacial and switching properties.

EXPERIMENTS

Two series of PGS with different spacers were prepared through electrostatic association between amines and oleic acid. The interfacial activity and CO₂-responsive properties of corresponding emulsions were systematically investigated by well-designed experiments and molecular dynamics simulations.

FINDINGS

Increasing the spacer length to allow the bent configuration leads to more tight arrangement of oleic molecules, consequently improving the interfacial activity. In addition, the introduction of amino group into the spacer dramatically promotes CO₂ response of resulting PGS due to ehanced migration of the spacer from the interface to the aqueous phase after CO₂ addition. These results are inspiring in designing controllable CO₂-responsive emulsions for a wide range of industrial applications (e.g., enhanced oil recovery and oil-contaminated soil remediation).

Highly Efficient Absorption of CO2 by Protic Ionic Liquids-Amine Blends at High Temperatures

In view of the increasingly serious harm of CO₂ to the environment, it is highly desirable to develop effective CO₂ absorbents. In this work, we demonstrated an efficient absorption of CO₂ by blends of protic ionic liquids (PILs) plus amines. The density and viscosity of investigative four PILs-amine mixtures were measured. By systematically studying the effects of the solution ratio, temperature, CO₂ partial pressure, and water content on the absorption of CO₂, it is found that the 3-dimethylamino-1-propylamine acetate ([DMAPAH][OAc]) plus ethanediamine (EDA) mixture shows the highest CO₂ uptake of 0.295 g CO₂ per g absorbent at 50 °C and 1 bar and a further increase in the absorption of CO₂ to 0.299 g/g by adding water with a mass fraction of 20%. Furthermore, the absorption mechanism of CO₂ in the presence and absence of water has also been investigated by FTIR and NMR spectra.

Significantly promoted SO2 uptake by the mixture of N-methylated ethylene imine polymer and 1-ethyl-3-methylimidazolium tetrazolate

A novel class of hybrid solvents (mEIP:Tetz) comprising of N-methylated ethylene imine polymer (mEIP) and 1-ethyl-3-methylimidazolium tetrazolate ([Emim][Tetz]) were developed for the highly efficient and reversible capture of SO₂. The synergistic interactions rather than simple mixing between mEIP and [Emim][Tetz] were confirmed by Fourier transform infrared spectroscopy (FTIR), nuclear magnetic resonance (NMR) and density functional theory (DFT) calculations. Besides, it was experimentally demonstrated that mEIP:Tetz mixtures exhibited improved kinetics for SO₂ absorption, and the production of viscous solids were completely eliminated, compared with using mEIP alone. More significantly, an exceedingly high solubility of 0.308 g SO₂·g^-1 absorbent in 2mEIP:8Tetz was received for trapping SO₂ from simulated flue gas containing 2000 ppm SO₂, which was much higher than most of the results reported in previous literatures under the same conditions. Finally, the absorption and desorption mechanisms were proposed according to the results of FTIR and ¹H NMR analysis.

The dynamic behavior and intrinsic mechanism of CO2 absorption by amino acid ionic liquids

Reducing carbon dioxide emissions is one of the possible solutions to prevent global climate change, which is urgently needed for the sustainable development of our society. In this work, easily available, biodegradable amino acid ionic liquids (AAILs) with great potential for CO₂ absorption in the manned closed space such as spacecraft, submarines and other manned devices are used as the basic material. Molecular dynamics simulations and ab initio calculations were performed for 12 AAILs ([P4444][X] and [P66614][X], [X] = X = [GLy]^-, [Im]^-, [Pro]^-, [Suc]^-, [Lys]^-, [Asp]^2-), and the dynamic characteristics and the internal mechanism of AAILs to improve CO₂ absorption capacity were clarified. Based on structural analysis and the analysis of interaction energy including van der Waals and electrostatic interaction energy, it was revealed that the anion of ionic liquids dominates the interaction between CO₂ and AAILs. At the same time, the CO₂ absorption capacity of AAILs increases in the order [Asp]^2- < [Suc]^- < [Lys]^- < [Pro]^- < [Im]^- < [Gly]^-. Meanwhile, the synergistic absorption of CO₂ by multiple-sites of amino and carboxyl groups in the anion was proved by DFT calculations. These findings show that the anion of AAILs can be an effective factor to regulate the CO₂ absorption process, which can also provide guidance for the rational and targeted molecular design of AAILs for CO₂ capture, especially in the manned closed space.

Basic ionic liquids for catalysis: the road to greater stability

Homogeneous and heterogenized basic ionic liquids as reaction catalysts have been highlighted, particularly where they are used to promote reactions that could form the basis of more sustainable energy and chemical production.

Ionic Liquid-Modified Porous Organometallic Polymers as Efficient and Selective Photocatalysts for Visible-Light-Driven CO2 Reduction

In the photoreduction of CO₂ to CO, the competitive H₂ evolution is always inevitable due to the approximate reduction potentials of H⁺/H₂ and CO₂/CO, which results in poor selectivity for CO production. Herein, imidazolium-type ionic liquid- (IL-) modified rhenium bipyridine-based porous organometallic polymers (Re-POMP-IL) were designed as efficient and selective photocatalysts for visible-light CO₂ photoreduction to CO based on the affinity of IL with CO₂. Photoreduction studies demonstrated that CO₂ photoreduction promoted by Re-POMP-IL functioning as the catalyst exhibits excellent CO selectivity up to 95.5% and generate 40.1 mmol CO/g of Re-POMP-IL1.0 (obtained by providing equivalent [(5,5′-divinyl-2,2′-bipyridine)Re(CO)₃Cl] and 3-ethyl-1-vinyl-1H-imidazol-3-ium bromide) at 12 h, outperforming that attained with the corresponding Re-POMP analogue without IL, which highlights the crucial role of IL. Notably, CO₂ adsorption, light harvesting, and transfer of photogenerated charges as key steps for CO₂RR were studied by employing POMPs modified with different amounts of IL as photocatalysts, among which the CO₂ affinity as an important factor for POMPs catalyzed CO₂ reduction is revealed. Overall, this work provides a practical pathway to improve the CO₂ photoreduction efficiency and CO selectivity by employing IL as a regulator.

The Nature of Carbon Dioxide in Bare Ionic Liquids

Ionic liquids (ILs) are among the most studied and promising materials for selective CO₂ capture and transformation. The high CO₂ sorption capacity associated with the possibility to activate this rather stable molecule through stabilization of ionic/radical species or covalent interactions either with the cation or anion has opened new avenues for CO₂ functionalization. However, recent reports have demonstrated that another simpler and plausible pathway is also involved in the sorption/activation of CO₂ by ILs associated with basic anions. Bare ILs or IL solutions contain almost invariable significant amounts of water and through interaction with CO₂ generate carbonates/bicarbonates rather than carbamic acids or amidates. In these cases, the IL acts as a base and not a nucleophile and yields buffer-like solutions that can be used to shift the equilibrium toward acid products in different CO₂ reutilization reactions. In this Minireview, the emergence of IL buffer-like solutions as a new reactivity paradigm in CO₂ capture and activation is described and analyzed critically, mainly through the evaluation of NMR data.

Cooperative CO2 absorption by amino acid-based ionic liquids with balanced dual sites

In this study, a variety of functionalized ILs with dual sites including amino acid group (AA) and basic anion (R) were synthesized to investigate the suppression and cooperation between the sites in CO₂ absorption. The basic anions selected in this study with different basicity include sulfonate (Su), carboxylate (Ac), imidazolium (Im), and indolium (Ind). These ILs ([P₆₆₆₁₄]₂[AA-R]) were applied to CO₂ absorption. The results present that CO₂ capacity increases first and then decreases later with the continuous increase in the activity of the anion site. Combined with CO₂ absorption experiments, IR and NMR spectroscopic analyses and DFT calculation demonstrate that the ability of one site to capture CO₂ would be suppressed when the activity of another site is much stronger. Thus, the cooperation of dual site-functionalized ILs and high CO₂ capacity might be achieved through balancing the two sites to be equivalent. Based on this point, [P₆₆₆₁₄]₂[5Am-iPA] was further synthesized by taking the advantage of the conjugated benzene ring. As expected, [P₆₆₆₁₄]₂[5Am-iPA] showed capacity as high as 2.38 mol CO₂ per mol IL at 30 °C and 1 bar without capacity decrease even after 10 times recycling performance of CO₂ absorption and desorption.

Multi-molar CO2 capture beyond the direct Lewis acid-base interaction mechanism

Some singly charged ionic liquids (ILs) have been reported to absorb multi-molar CO2. However, the conventional acid(CO2)-base(anion) interaction picture leads to too weak CO2 binding to support the high uptake. Later, a so-called "cation-channel" mechanism assuming the cation-to-anion proton transfer successfully explains the over equimolar CO2 uptake of some phosphonium-based ILs. Here, by employing the density functional theory (DFT) calculations, we extend the proton transfer mechanism to incorporate imidazole- and ammonium-based ILs as well. For imidazole-based ILs, carbene molecules formed after the proton transfer can react strongly with CO2. More importantly, for ammonium-based ILs, the proton transfer process is feasible only with the help of CO2 molecules. Furthermore, compared to the one IL ion pair model, the model consisting of two IL ion pairs can result in stronger CO2 absorption because it can describe the intermolecular hydrogen bonds more appropriately, especially after incorporating CO2 molecules. The relative acidity and basicity of cations and anions in ILs may be crucial for understanding their functionalization as ILs.

Development of High-Capacity and Water-Lean CO2 Absorbents by a Concise Molecular Design Strategy through Viscosity Control

The exponentially increasing viscosity of water-lean CO₂ absorbents during carbon capture processes is a critical problem for practical application, owing to its strong correlation with systems' mass transfer properties, as well as convenience of transportation. In this work, a concise strategy based on structure-viscosity relationships is proposed and applied to construct a series of functionalized ethylenediamines as single-component absorbents for post-combustion CO₂ capture. These nonaqueous absorbents have outstanding viscosities (50-200 cP, 25 °C) at their maximal CO₂ capacities (up to 22 wt % or 4.92 mol kg^-1 , 1 bar), and are readily regenerated at low temperatures (50-80 °C) under ambient pressure. Additional capture of CO₂ through physisorption could also be achieved by operating at high pressures. The CO₂ capture and release process is systematically investigated by means of ¹³ C NMR spectroscopy, differential scanning calorimetry (DSC), in situ FTIR analysis, and density functional theory (DFT) calculations, which could provide sufficient spectroscopic details to reveal the ease of reversibility and enable rational interpretation of the absorption mechanism.

Enhanced CO2 capture by reducing cation-anion interactions in hydroxyl-pyridine anion-based ionic liquids

In this work, an efficient strategy for improving CO2 capture based on anion-functionalized ionic liquids (ILs) by reducing cation-anion interactions in ILs was reported. The influence of the cationic species on CO2 absorption was investigated using 2-hydroxyl pyridium anions ([2-Op]) as a probe. CO2 capture experiments indicated that the CO2 absorption capacity in [2-Op] anion-based ILs varied from 0.94 to 1.69 mol CO2 per mol IL at 30 °C and 1 atm. Spectroscopic analysis and quantum chemical calculations suggested that the increase of the CO2 absorption capacity may be ascribed to the reduction of the strength of cation-anion interactions in ILs, and stronger cation-anion interactions would make one CO2 site in the [2-Op] anion inactive. Furthermore, the effect of the cation unit on the anion was evidenced by FT-IR spectra, implying that strong interactions between ions may lead to the decrease of the IR absorption wavenumber of hydroxy pyridium and work against CO2 capture. Following this strategy, it was finally found that [Ph-C8eim][2-Op] (Ph-C8eim = 1-N-ethyl-3-N-octyl-2-phenylimidazolium) with weaker cation-anion interactions exhibited a significant increase in the CO2 uptake capacity, and extremely high capacities of 1.69 and 1.83 mol CO2 per mol IL could be achieved at 30 and 20 °C, respectively. The study presented here would be helpful for further designing novel and effective ILs for advancing CO2 capturing performance.

Reply to the Correspondence on "Preorganization and Cooperation for Highly Efficient and Reversible Capture of Low-Concentration CO2 by Ionic Liquids"

The water content is crucial to the preparation of [P₄₄₄₂ ][Suc] and its capture of CO₂ . The use of a large amount of water in the preparation of this ionic liquid results in the significant formation of the byproduct succinamate anions and difficulties in water removal, which strongly reduces the capacity of CO₂ absorption through a bicarbonate mechanism. By contrast, the addition of a small amount of water maintains a high absorption capacity through cooperation.