A Stable Metal-Organic Framework Featuring a Local Buffer Environment for Carbon Dioxide Fixation

Novel unlabeled electrochemical sensing platform based on highly electroactive Cu-MOF film for nanoplastic detection in water

An unlabeled electrochemical sensing strategy based on electroactive copper-centered metal-organic framework (Cu-MOF) film coupled with multiwalled carbon nanotubes (MWCNTs) was proposed for the rapid assessment of nanoplastic concentration. The sensing interface was fabricated via the electro-deposition of Cu-MOF on the pre-modified MWCNTs using the cathodic reduction method. The exposed copper active sites in Cu-MOF showed excellent electrochemical activity, which was further enhanced due to rapid electron transfer induced by highly conductive MWCNTs. Through the adsorption functionality of Cu-MOF film towards polystyrene (PS) nanoplastics, the rapid recognition for nanoplastics in aqueous solution was achieved, thereby causing the inhibition of the current response. The results showed a robust dependence of the inhibition rate on the PS mass concentration. The proposed detection method was used for the quantitative determination of PS nanoplastics with the sizes of 100 nm, 500 nm, and 1 μm. The applicability of this electrochemical sensing platform was successfully validated in real-world water sample analysis.

Mixed-ligand based water-stable Mn(II)-MOF for quick, sensitive, and reusable IFE-PET-RET facilitated detection of formaldehyde and Cr(VI)-oxoanions in real-field samples like food and industrial water: experimental and theoretical insights

We report the luminescence-based detection of Group-1 carcinogen formaldehyde (FA) and Cr(VI)-oxoanions with a mesoporous Mn(II)-MOF (1), featuring a uninodal 4-c net topology and linear 1D square channels forming a polymeric 2D network. The Mn-MOF i.e., [Mn(phen)(hia)(H2O)]∞ was solvothermally constructed using π-conjugated, chelating phenanthroline (phen) and µ3-η2:η1 binding 5-hydroxyisophthalic acid (hia) ligands. The 2D rod-like crystallites of 1 demonstrated excellent phase purity, high thermal and photostability, and robustness under harsh conditions. The SCXRD and XPS studies established the structural framework and elemental composition, while the Hirshfeld surface analysis and NCI-RDG plot confirmed the presence of π-π stacking and weak interactions in 1. We explored the bright-blue emission of 1 for recyclable and fast-responsive (∼70 s) 'turn-off' detection of FA, with a low limit of detection (LOD) of 8.49 µM. Based on this, a 04-input-03-output molecular logic gate was proposed, which can be useful as a molecular switch for future applications. Furthermore, a unique experimental setup using the MOF film demonstrated ∼57% quenching upon exposure to FA vapor (an indoor VOC). Additionally, 1 exemplified itself as an efficient probe towards Cr(VI)-oxyanions, depicting LODs of 79 and 170 ppb, Stern-Volmer constants (KSV) of 16.13 × 104 and 12.73 × 104 M-1, and response times of ∼48 and ∼40 s for CrO42- and Cr2O72-, respectively. DFT calculations and specific wet-chemical investigations elucidated the FA detection to be triggered by photo-induced electron transfer (PET), while the Cr(VI)-sensing involved a combination of PET, the inner-filter effect (IFE), resonance energy transfer (RET), and electrostatic H-bonding interactions. The FA detection was validated using food samples (fish and meat) and wastewater specimens, achieving excellent recovery rates of ∼92-95%. Furthermore, the MOF's efficacy in recognizing the Cr(VI)-species in complex matrices (coal mine wastewater, sewage, and tap water) was investigated to yield high KSV values (3.10-5.17 × 104 and 2.16-7.03 × 104 M-1 for CrO42- and Cr2O72-), which demonstrated the probe's consistency and reliability.

Electrochemical Selective Removal of Oxyanions in a Ferrocene-Doped Metal-Organic Framework

Metal-organic frameworks (MOF) are a class of crystalline, porous materials possessing well-defined channels that have widespread applications across the sustainable landscape. Analogous to zeolites, these materials are well-suited for adsorption processes targeting environmental contaminants. Herein, a zirconium MOF, UiO-66, was functionalized with ferrocene for the selective removal of oxyanion contaminants, specifically NO3-, SO42-, and PO43-. Electrochemical oxidation of the embedded ferrocene pendants induces preferential adsorption of these oxyanions, even in the presence of Cl- in a 10-fold excess. Anion selectivity strongly favoring PO43- (Soxy/comp = 3.80) was observed following an adsorption trend of PO43- > SO42- > NO3- > (10-fold)Cl- in multi-ion solution mixtures. The underlying mechanisms responsible for ion selectivity were elucidated by performing ex situ X-ray photoelectron spectroscopy (XPS) on the heterogeneous electrode surface postadsorption and by calculating the electronic structure of various adsorption configurations. It was eventually shown that oxyanion selectivity stemmed from strong ion association with a positively charged pore interior due to the spatial distribution of charge by oxygen constituents. While ferrocenium provided the impetus for ion migration-diffusion, it was the formation of stable complexes with zirconium nodes that ultimately contributed to selective adsorption of oxyanions.

Ultrastable Carboxyl-Functionalized Pore-Space-Partitioned Metal-Organic Frameworks for Gas Separation

Isoreticular chemistry, which enables property optimization by changing compositions without changing topology, is a powerful synthetic strategy. One of the biggest challenges facing isoreticular chemistry is to extend it to ligands with strongly coordinating substituent groups such as unbound -COOH, because competitive interactions between such groups and metal ions can derail isoreticular chemistry. It is even more challenging to have an isoreticular series of carboxyl-functionalized MOFs capable of encompassing chemically disparate metal ions. Here, with the simultaneous introduction of carboxyl functionalization and pore space partition, a family of carboxyl-functionalized materials is developed in diverse compositions from homometallic Cr3+ and Ni2+ to heterometallic Co2+/V3+, Ni2+/V3+, Co2+/In3+, Co2+/Ni2+. Cr-MOFs remain highly crystalline in boiling water. Unprecedentedly, one Cr-MOF can withstand the treatment cycle with 10m NaOH and 12m HCl, allowing reversible inter-conversion between unbound -COOH acid form and -COO- base form. These materials exhibit excellent sorption properties such as high uptake capacity for CO2 (100.2 cm3 g-1) and hydrocarbon gases (e.g., 142.1 cm3 g-1 for C2H2, 110.5 cm3 g-1 for C2H4) at 1 bar and 298K, high benzene/cyclohexane selectivity (up to ≈40), and promising separation performance for gas mixtures such as C2H2/CO2 and C2H2/C2H4.

Mixed N,O-donor Directed Blue Emissive Nano-dispersed Mesoporous Mn(II)-MOF: Dual Sensing Probe for Recyclable and Ultrasensitive ppb-Level Recognition of TNP and Cr(VI)-Oxoanions

A new mesoporous Mn(II)-MOF [Mn2(phen)2(nia)2]∞ with 4-c uninodal net topology and reiterating rectangular channels in its cargo-net like extension was synthesized using π-conjugated phenanthroline (phen) and syn-syn bridging 5-nitroisopthalic acid (nia) linkers. The MOF (1) exhibited phase purity, uniform morphology, photo and thermal stability, and robustness; duly triggered by the exceptional framework rigidity via intermolecular H-bonding and interlayer π-π stacking interactions. The bright-blue luminescence of the MOF nano-dispersion was explored for sensitive, specific and ultrafast detection of trinitrophenol (TNP) with extremely low LOD (90.62 nM), high KSV (18.27×104 M-1) and Kq (4×1014 M-1s-1). The vapor-phase TNP sensing was also accomplished. Additionally, 1 served towards discriminatory, aqueous-phase monitoring of Cr(VI)-oxoanions, depicting LODs: 36.08 and 35.70 ppb; KSV: 3.46×104 and 4.87×104 M-1; Kq: 3.26×1013 M-1s-1 and 4.31×1013 M-1s-1; and response time: 32 and 40s for CrO4 2- and Cr2O7 2- respectively. The quenching mechanisms (i. e., RET, PET, IFE, weak interactions, collisional quenching and π⋅⋅⋅π stacking) was explained from several experimental investigations and theoretical DFT calculations. The recyclable sensing events and quantification from complex environmental matrices with admirable recovery rates and high KSV (13.02-22.44×104; ~6.31-10.98×104 and ~6.60-11.42×104 M-1 for TNP, CrO4 2- and Cr2O7 2-) undoubtedly advocated the consistency of the probe.

Ultra-stable hollow nanotube conjugated microporous polymer incorporating fluorenyl moieties for Co-capture of PM and CO2

Conjugated microporous polymers have a highly delocalized π-π conjugated porous skeleton connected by covalent bonds, which can combine their excellent stability with high adsorption, in order to be applied to the study of co-capture of harmful particulate matter (PM) and carbon dioxide (CO2) under high temperature and high humidity conditions. In this paper, fluorene-based coupled conjugated microporous polymers (D-CMPs) with functionalized hollow nanotubes and abundant microporous structures were proposed. Through mechanism exploration and molecular electrostatic potential (MESP) calculation, the capture efficiency, adsorption capacity and selectivity of PM and CO2 in the waste gas stream of carbon-based combustion were analyzed. The results indicate that D-CMPs, with their rigid carbon-based π-conjugated framework, exhibit excellent tolerance under prolonged high-humidity conditions, with a capture efficiency exceeding 99.87% for PM0.3 and exceeding 99.99% for PM2.5. Meanwhile, based on its chemical/thermal stability, it can realize the recycling of adsorption-regeneration. On this basis, the "slip effect" induced by the open three-dimensional hierarchical porous structure of D-CMPs significantly enhances airflow dispersion and improves gas throughput (with a minimal permeation resistance of only 15 Pa). At a pressure of 1 bar and a temperature of 273.15 K, D-CMP-2 exhibited a CO2 adsorption capacity of up to 2.69 mmol g-1. The fitting results of three isothermal adsorption models demonstrate that D-CMPs exhibit an outstanding equilibrium selectivity towards CO2. Therefore, prior to the widespread adoption of low-carbon and clean energy technologies, porous solid materials exhibiting excellent structural stability, equilibrium selectivity, environmental tolerance, and high adsorption capacity emerge as optimal candidates for the treatment of industrial waste gases.

Bridging the Homogeneous and Heterogeneous Catalysis by Supramolecular Metal-Organic Cages with Varied Packing Modes

Integrating the advantages of homogeneous and heterogeneous catalysis has proved to be an optimal strategy for developing catalytic systems with high efficiency, selectivity, and recoverability. Supramolecular metal-organic cages (MOCs), assembled by the coordination of metal ions with organic linkers into discrete molecules, have performed solvent processability due to their tunable packing modes, endowing them with the potential to act as homogeneous or heterogeneous catalysts in different solvent systems. Here, the design and synthesis of a series of stable {Cu3} cluster-based tetrahedral MOCs with varied packing structures are reported. These MOCs, as homogeneous catalysts, not only show high catalytic activity and selectivity regardless of substrate size during the CO2 cycloaddition reaction, but also can be easily recovered from the reaction media through separating products and co-catalysts by one-step work-up. This is because that these MOCs have varied solubilities in different solvents due to the tunable packing of MOCs in the solid state. Moreover, the entire catalytic reaction system is very clean, and the purity of cyclic carbonates is as high as 97% without further purification. This work provides a unique strategy for developing novel supramolecular catalysts that can be used for homogeneous catalysis and recycled in a heterogeneous manner.

A Hierarchical Metal-Organic Framework Composite Aerogel Catalyst Containing Integrated Acid, Base, and Metal Sites for the One-Pot Catalytic Synthesis of Cyclic Carbonates

Catalysis has played a decisive role in the development of unique chemical reactions to produce important chemicals. However, conventional stepwise synthetic routes that rely on individual catalysts to promote each step often suffer from ponderous processes for the isolation of intermediates that result in massive material losses and large economic expenditures. In addition, traditional powder forms of these catalysts suffer from poor processability and recoverability. Herein, we designed and prepared a hierarchical metal-organic framework (MOF) composite monolithic catalyst IL-Au@UiO-66-NH2/CMC that contains integrated acid (Zr4+), base (ionic liquid (IL)), and metal sites (Au nanoparticles (NPs)) to promote the one-pot preparation of cyclic carbonates from styrene derivatives and CO2. Highly dispersed Au NPs, IL 1-aminoethyl-3-methylimidazolium bromide ([C2NH2 MIM] [Br]), and MOF-positioned Lewis acid sites within this composite aerogel are separately responsible for catalyzing selective epoxidation of the styrene derivatives and the subsequent cycloaddition reaction of CO2 with intermediate styrene oxides. Importantly, inclusion of the imidazolium-based IL effectively modulates the size and chemical microenvironment of the Au NPs via electrostatic protection, leading to catalyst stability and its selective oxidation of styrene. Benefiting from the rapid mass transfer and high exposure of active sites within the pore-rich hierarchical nanostructure, IL-Au@UiO-66-NH2/CMC promotes high conversion (90.5%) of the styrene and selectivity (80.5%) for styrene carbonate (SC) formation in the one-pot process, a performance level that far exceeds those of related catalysts containing only Au NPs or IL (the selectivity of SC < 42%). Furthermore, the composite aerogel catalyst can be readily separated and recycled at least five times without a remarkable loss of activity and selectivity. The controllable integration of various active components in the hierarchical MOF composite aerogel herein should serve as the foundation for the design of multifunctional monolithic catalysts for other valuable tandem processes.

Atomic-level design of metalloenzyme-like active pockets in metal-organic frameworks for bioinspired catalysis

Natural metalloenzymes with astonishing reaction activity and specificity underpin essential life transformations. Nevertheless, enzymes only operate under mild conditions to keep sophisticated structures active, limiting their potential applications. Artificial metalloenzymes that recapitulate the catalytic activity of enzymes can not only circumvent the enzymatic fragility but also bring versatile functions into practice. Among them, metal-organic frameworks (MOFs) featuring diverse and site-isolated metal sites and supramolecular structures have emerged as promising candidates for metalloenzymes to move toward unparalleled properties and behaviour of enzymes. In this review, we systematically summarize the significant advances in MOF-based metalloenzyme mimics with a special emphasis on active pocket engineering at the atomic level, including primary catalytic sites and secondary coordination spheres. Then, the deep understanding of catalytic mechanisms and their advanced applications are discussed. Finally, a perspective on this emerging frontier research is provided to advance bioinspired catalysis.

Multifunctional Lanthanide Metal-Organic Frameworks Based on -NH2 Modified Ligand: Fluorescent Ratio Probe, CrO42- Ions Adsorption, and Photocatalytic Property

In response to the growing concern for environmental pollution, two lanthanide compounds {[Ln(L)(H2O)]·4H2O}n (where Ln = Tb and Gd, H3L = 1-amino-2,4,6-benzene tricarboxylic acid) were synthesized using a -NH2 modified ligand and systematically characterized. Both compounds exhibit remarkable fluorescence response, adsorption of CrO42- ions, and photocatalytic degradation properties, as well as exceptional acid-base and thermal stability. Remarkably, the pH-dependent 1-Tb exhibits exceptional performance as a fluorescent probe for detecting Fe3+ and CrO42-/Cr2O72- ions in aqueous solutions, while also serving as a ratiometric fluorescent probe for the detection of Cr3+, offering rapid response, high sensitivity, selectivity, and recoverability advantages in application. Moreover, 1-Tb exhibits excellent detection capabilities and displays effective adsorption of CrO42- ions, with a maximum adsorption capacity of 230.71 mg/g. On the other hand, 1-Gd exhibits superior performance compared to 1-Tb in the photocatalytic degradation of antibiotics. The degradation mechanism is further elucidated by conducting experiments with DFT theoretical calculations.

Th6-Based Multicomponent Heterometallic Metal-Organic Frameworks Featuring 6,12-Connected Topology for Iodine Adsorption

Its high coordination number and tendency to cluster make Th4+ suitable for constructing metal-organic frameworks (MOFs) with novel topologies. In this work, two novel thorium-based heterometallic MOF isomers (IHEP-17 and IHEP-18) were assembled from a Th6 cluster, a multifunctional organic ligand [4-(1H-pyrazol-4-yl)benzoic acid (HPyba)], and Cu2+/Ni2+ cations via the one-pot solvothermal synthesis strategy. The framework features a 6,12-connected new topology net and contains two kinds of supramolecular cage structures, Th36M4 and Th24M2, suitable for guest exchange. Both MOF materials can efficiently adsorb I2. X-ray photoelectron spectroscopy, Raman spectroscopy, and single-crystal X-ray diffraction indicate that the adsorbed iodine is uniformly distributed within the Th36M4 cage but not the Th24M2 cage in the form of I3-.

MOFs as Versatile Catalysts: Synthesis Strategies and Applications in Value-Added Compound Production

Catalysts played a crucial role in advancing modern human civilization, from ancient times to the industrial revolution. Due to high cost and limited availability of traditional catalysts, there is a need to develop cost-effective, high-activity, and nonprecious metal-based electrocatalysts. Metal-organic frameworks (MOFs) have emerged as an ideal candidate for heterogeneous catalysis due to their physicochemical properties, hybrid inorganic/organic structures, uncoordinated metal sites, and accessible organic sections. MOFs are high nanoporous crystalline materials that can be used as catalysts to facilitate polymerization reactions. Their chemical and structural diversity make them effective for various reactions compared to traditional catalysts. MOFs have been applied in gas storage and separation, ion-exchange, drug delivery, luminescence, sensing, nanofilters, water purification, and catalysis. The review focuses on MOF-enabled heterogeneous catalysis for value-added compound production, including alcohol oxidation, olefin oligomerization, and polymerization reactions. MOFs offer tunable porosity, high spatial density, and single-crystal XRD control over catalyst properties. In this review, MOFs were focused on reactions of CO2 fixation, CO2 reduction, and photoelectrochemical water splitting. Overall, MOFs have great potential as versatile catalysts for diverse applications in the future.

Cordierite@MOFs with Easy Recovery in CO2 Cycloaddition

The objective of this research is to create monolithic heterogeneous catalysts (cordierite@MOFs) through the application of metal-organic framework (MOF) materials onto honeycomb cordierite for CO2 cycloaddition. By employing monolithic catalysts instead of powdered catalysts, the recycling and reusability of catalysts during postreaction treatment can be significantly improved.

The impact of green finance on industrial pollution emissions: Empirical evidence from economic and environmental perspectives

Green finance can make full use of financial instruments to control industrial pollution emissions, thus becoming an important initiative to balance ecological environment and economic growth. Based on panel data from 30 Chinese provinces, this study adopts a fixed effect model to test the impact of green finance on industrial pollution emissions, followed by the application of instrumental variables, a GMM dynamic panel, and exogenous shock tests to ensure the robustness of the benchmark results. The results indicate that green finance is capable of controlling the total amount and intensity of industrial pollution emissions, that is to say, to realize the "double control" of industrial pollution emissions, taking into account economic growth and environmental protection. The mediating effect model concludes that green finance can influence industrial pollution emissions through green technology innovation and industrial structure upgrading, but the impact of these two mechanisms on the total amount and intensity of industrial pollution emissions has its own focus. Heterogeneity analysis shows that green finance is more significant in reducing the intensity of industrial pollution emissions in resource-general areas and areas with high levels of information technology, and the shift from controlling the total amount indicator to the intensity indicator implies that green finance is more effective in promoting economic growth while protecting the environment. Our empirical findings offer important policy implications for reducing industrial pollution emissions from both economic and environmental perspectives.

Heterometallic ZnHoMOF as a Dual-Responsive Luminescence Sensor for Efficient Detection of Hippuric Acid Biomarker and Nitrofuran Antibiotics

Developing efficient and sensitive MOF-based luminescence sensors for bioactive molecule detection is of great significance and remains a challenge. Benefiting from favorable chemical and thermal stability, as well as excellent luminescence performance, a porous Zn(II)Ho(III) heterometallic-organic framework (ZnHoMOF) was selected here as a bifunctional luminescence sensor for the early diagnosis of a toluene exposure biomarker of hippuric acid (HA) through "turn-on" luminescence enhancing response and the daily monitoring of NFT/NFZ antibiotics through "turn-off" quenching effects in aqueous media with high sensitivity, acceptable selectivity, good anti-interference, exceptional recyclability performance, and low detection limits (LODs) of 0.7 ppm for HA, 0.04 ppm for NFT, and 0.05 ppm for NFZ. Moreover, the developed sensor was employed to quantify HA in diluted urine samples and NFT/NFZ in natural river water with satisfactory results. In addition, the sensing mechanisms of ZnHoMOF as a dual-response chemosensor in efficient detection of HA and NFT/NFZ antibiotics were conducted from the view of photo-induced electron transfer (PET), as well as inner filter effects (IFEs), with the help of time-dependent density functional theory (TD-DFT) and spectral overlap experiments.

Thermocatalytic Conversion of CO2 to Valuable Products Activated by Noble-Metal-Free Metal-Organic Frameworks

Thermocatalysis of CO2 into high valuable products is an efficient and green method for mitigating global warming and other environmental problems, of which Noble-metal-free metal-organic frameworks (MOFs) are one of the most promising heterogeneous catalysts for CO2 thermocatalysis, and many excellent researches have been published. Hence, this review focuses on the valuable products obtained from various CO2 conversion reactions catalyzed by noble-metal-free MOFs, such as cyclic carbonates, oxazolidinones, carboxylic acids, N-phenylformamide, methanol, ethanol, and methane. We classified these published references according to the types of products, and analyzed the methods for improving the catalytic efficiency of MOFs in CO2 reaction. The advantages of using noble-metal-free MOF catalysts for CO2 conversion were also discussed along the text. This review concludes with future perspectives on the challenges to be addressed and potential research directions. We believe that this review will be helpful to readers and attract more scientists to join the topic of CO2 conversion.

Study on Gas Sorption and Iodine Uptake of a Metal-Organic Framework Based on Curcumin

Medi-MOF-1 is a highly porous Metal-Organic framework (MOF) constructed from Zn(II) and curcumin. The obtained crystal was characterized using powder X-ray diffraction (PXRD) and scanning electron microscopy (SEM). A micrometer-sized crystal with similar morphology was successfully obtained using the solvothermal method. Thanks to its high surface area, good stability, and abound pores, the as-synthesized medi-MOF-1 could be used as a functional porous material to adsorb different gases (H₂, CO₂, CH₄, and N₂) and iodine (I₂). The activated sample exhibited a high I₂ adsorption ability of 1.936 g g^-1 at room temperature via vapor diffusion. Meanwhile, the adsorbed I₂ could be released slowly in ethanol, confirming the potential application for I₂ adsorption.

Structural Compromise Between Conflicted Spatial-Arrangements of Two Linkers in Metal-Organic Frameworks

The structural control of metal-organic frameworks (MOFs) is essential for the development of superlative MOFs because the structural features of MOFs and their components play a critical role in determining their properties, and ultimately, their applications. The best components to endow the desired properties for MOFs are available via the appropriate choice from many existing chemicals or synthesizing new ones. However, to date, considerably less information exists regarding fine-tuning the MOF structures. Herein, a strategy for tuning MOF structures by merging two MOF structures into a single MOF, is demonstrated. Depending on the incorporated amounts and relative contributions of the two coexisting organic linkers, benzene-1,4-dicarboxylate (BDC^2- ) and naphthalene-1,4-dicarboxylate (NDC^2- ), which have conflicting spatial-arrangement preferences within an MOF structure, MOFs are rationally designed to have a Kagomé or rhombic lattice. In particular, MOFs with rhombic lattices are constructed to have specific lattice angles by compromising the optimal structural arrangements between the two mixed linkers. The relative contributions of the two linkers during MOF construction determine the final MOF structures, and the competitive influence between BDC^2- and NDC^2- is effectively regulated to produce specific MOF structures with controlled lattices.

Multifunctional Cd-CP for fluorescence sensing of Cr(VI), MnO4-, acetylacetone and ascorbic acid in aqueous solutions

The development of multifunctional fluorescent chemosensors for the detection of multiple targets remains challenging but of great importance. In this paper, one novel coordination polymer (CP), denoted as [Cd₂(edda)(phen)₂]∙H₂O (compound 1, H₄edda = 5,5' (ethane-1,2-diylbis(oxy)) diisophthalic acid, phen = 1,10-phenanthroline) is successfully designed and prepared under hydrothermal conditions. Structural analysis indicates that compound 1 possesses a one-dimensional (1D) double chain structure, then self-assembles into a three-dimensional (3D) supramolecular framework via π…π interactions between phen molecules. Interestingly, compound 1 is found to be tolerant in wide range of acidic to alkaline aqueous solutions (pH = 2-13). Fluorescent spectral investigations reveal that compound 1 exhibits highly selective and sensitive fluorescence responses toward MnO₄^-, Cr(VI) ions, acetylacetone (acac) and ascorbic acid (AA) by fluorescence quenching in the aqueous phase. The detection limits are in the very low range, reaching μM level for the detection of MnO₄^-, Cr(VI) ions, nM for AA and ppm for acac detection. The distinguished multi-responsive performance suggests compound 1 to be a potential multifunctional probe. Furthermore, the possible quenching mechanisms have also been systematically investigated in this work.

Design and Construction of an Azo-Functionalized POP for Reversibly Stimuli-Responsive CO2 Adsorption

A porous azo-functionalized organic polymer (JJU-2) was designed and prepared via oxidative coupling polymerization promoted by FeCl3. JJU-2 exhibited reversibly stimuli-responsive CO2 adsorption properties as a result of the trans/cis isomerization of the polymer’s azo-functionalized skeleton. Under UV irradiation and heat treatment, this porous material displayed various porous structures and CO2 adsorption properties. The initial Brunauer-Emmett-Teller (BET) surface area of JJU-1 is 888 m2 g−1. After UV irradiation, the BET surface area decreases to 864 m2 g−1, along with the decrease of micropores around 0.50 nm and 1.27 nm during the trans-to-cis isomerization process. In addition, CO2 sorption isotherms demonstrate an 8%t decrease, and the calculated Qst of CO2 has decreased from 29.0 kJ mol−1 to 26.5 kJ mol−1 due to the trans to cis conversion of the azobenzene side group. It is noteworthy that JJU-2′s CO2 uptakes are nearly constant over three cycles of alternating external stimuli. Therefore, this azo-functionalized porous material was a potential carbon capture material that was responsive to stimuli.

Exploring a new family of designer copper(II) complexes of anthracene-appended polyfunctional organic assembly displaying potential anticancer activity via cytochrome c mediated mitochondrial apoptotic pathway

The present article describes the systematic study on design and synthesis, physicochemical properties and spectroscopic features, and potential anticancer activities of a family of novel copper(II)-based designer metal complexes [Cu₂(acdp)(μ-Cl)(H₂O)₂] (1), [Cu₂(acdp)(μ-NO₃)(H₂O)₂] (2) and [Cu₂(acdp)(μ-O₂CCF₃)(H₂O)₂] (3) of anthracene-appended polyfunctional organic assembly, H₃acdp (H₃acdp = N,N'-bis[anthracene-2-ylmethyl]-N,N'-bis[carboxymethyl]-1,3-diaminopropan-2-ol). Synthesis of 1-3 was accomplished under facile experimental conditions, preserving their overall integrity in solution. The incorporation of polycyclic anthracene skeleton within the backbone of organic assembly increases lipophilicity of resulting complexes, thereby dictating the degree of cellular uptake with improved biological activity. Complexes 1-3 were characterized by elemental analysis, molar conductance, FTIR, UV-Vis absorption/fluorescence emission titration spectroscopy, PXRD and TGA/DTA studies, including DFT calculations. The cellular cytotoxicity of 1-3 when studied in HepG2 cancer cell line showed substantial cytotoxic effects, whereas no such cytotoxicity was observed when exposed to normal L6 skeletal muscle cell line. Thereafter, the signaling factors involved in the process of cytotoxicity in HepG2 cancer cells were investigated. Alteration of cytochrome c and Bcl-2 protein expression levels along with modulation of mitochondrial membrane potential (MMP) in the presence of 1-3, strongly suggested the possibility of activating mitochondria-mediated apoptotic pathway involved in halting the cancer cell propagation. However, when a comparative assessment on their bio-efficacies was made, 1 showed higher cytotoxicity, nuclear condensation, DNA binding and damage, ROS generation and lower rate of cell proliferation compared to 2 and 3 in HepG2 cell line, indicating that the anticancer activity of 1 is significantly higher than that of 2 and 3.

Transition Metal Single Atoms Constructed by Using Inherent Confined Space

Single-atom catalysts (SACs) show expressively enhanced activity toward diverse reactions due to maximized atomic utilization of metal sites, while their facile, universal, and massive preparation remains a pronounced challenge. Here we report a facile strategy for the preparation of SACs by use of the inherent confined space between the template and silica walls in template-occupied mesoporous silica SBA-15 (TOS). Different transition metal precursors can be introduced into the confined space readily by grinding, and during succeeding calcination single atoms are constructed in the form of M-O-Si (M = Cu, Co, Ni, and Zn). In addition to the generality, the present strategy is easy to scale up and can allow the synthesis of 10 g of SACs in one pot through ball milling. The Cu SAC has been applied for CO₂ cycloaddition of epichlorohydrin, and the activity is obviously higher than the counterpart prepared without confined space and various reported Cu-containing catalysts.

Metal-Organic Frameworks for Greenhouse Gas Applications

Using petrol to supply energy for a car or burning coal to heat a building generates plenty of greenhouse gas (GHG) emissions, including carbon dioxide (CO₂ ), water vapor (H₂ O), methane (CH₄ ), nitrous oxide (N₂ O), ozone (O₃ ), fluorinated gases. These up-and-coming metal-organic frameworks (MOFs) are structurally endowed with rigid inorganic nodes and versatile organic linkers, which have been extensively used in the GHG-related applications to improve the lives and protect the environment. Porous MOF materials and their derivatives have been demonstrated to be competitive and promising candidates for GHG separation, storage and conversions as they shows facile preparation, large porosity, adjustable nanostructure, abundant topology, and tunable physicochemical property. Enormous progress has been made in GHG storage and separation intrinsically stemmed from the different interaction between guest molecule and host framework from MOF itself in the recent five years. Meanwhile, the use of porous MOF materials to transform GHG and the influence of external conditions on the adsorption performance of MOFs for GHG are also enclosed. In this review, it is also highlighted that the existing challenges and future directions are discussed and envisioned in the rational design, facile synthesis and comprehensive utilization of MOFs and their derivatives for practical applications.

A metal-organic framework surrounded with conjugate acid-base pairs for the efficient capture of Cr(VI) via hydrogen bonding over a wide pH range

Given the large amount of toxic Cr(VI) wastewater from various industries, it is urgent to take effective treatment measures. Adsorption has been regarded as highly desirable for Cr(VI) removal, but the effectiveness of most adsorbents is significantly dependent on pH value, in which precipitous performance drop and even structural collapse generally occur in strong acidic/alkaline aqueous. Thus, maintaining high adsorption performance and structural integrity over a wide pH range is challenging. To efficiently remove Cr(VI), we designed and prepared of an acid-base resistant metal-organic framework (MOF) Zr-BDPO, by introducing weak acid-base groups (-NH-, -N= and -OH) onto the ligand. Zr-BDPO achieved a maximum adsorption capacity of 555.6 mg·g^-1 and retained skeletal structure at pH= 1-11. Interestingly, all these groups can generate conjugate acid-base pairs by means of H⁺ and OH^- in the external solution and then form buffer layer. The removal of Cr(VI) at a broad range of pH values primarily via hydrogen bonds between -NH- and -OH, and the oxoanion species of Cr(VI) is unusual. This strategy that insulating high concentrations of acids and bases and relying on hydrogen bonds to capture Cr(VI) oxoanions provides a new perspective for actual Cr(VI) wastewater treatment.

Construction of multifunctional NH2-UiO-66 metal organic framework: sensing and photocatalytic degradation of ketorolac tromethamine and tetracycline in aqueous medium

Existence of pharmaceutical residues in water has endangered environmental pollution worldwide, which makes it ineludible to develop prospective bifunctional materials which not only possess excellent fluorescence behaviour to monitor pharmaceuticals but also exhibit simultaneous photocatalytic removal efficiency. Strengthened by functionalized metal organic framework (MOF) materials, we present here an amine functionalized zirconium-based MOF NH₂-UiO-66 which has been successfully synthesized using solvothermal approach. The as prepared MOF was subjected to numerous structural, morphological and compositional characterizations. Interestingly, featured by the excellent fluorescent intensity of MOF modulated by LMCT effect, NH₂-UiO-66 was screened to detect pharmaceutical compounds with KTC and TC in aqueous solution. The prepared functionalized MOF showcased excellent sensing platform with magnificent response range (0‒3 µM), lower limit of detection (160 nM; KTC and 140 nM; TC), excellent selectivity and influential anti-interference capability. More importantly, the practical utility of the proposed sensor was further explored for the determination of pharmaceutical drugs in real water samples with suitable recoveries. Simultaneously, the synthesized MOF also exhibited high photocatalytic efficiency towards the removal of KTC and TC under solar light irradiation. The degradation efficiency for KTC and TC was found to be 68.3% and 71.8% within 60 and 280 min of solar light, respectively. Moreover, excellent recyclability was demonstrated by the current synthesized system over five cycles. Overall, this study presents a feasible route for the utilization of functionalized MOFs as potential dual functional materials towards the simultaneous detection and degradation of specific pharmaceuticals from aqueous medium.

Recent Advances in Metal-Organic-Framework-Based Nanocarriers for Controllable Drug Delivery and Release

Metal-organic frameworks (MOFs) have a good designability, a well-defined pore, stimulus responsiveness, a high surface area, and a controllable morphology. Up to now, various MOFs have been widely used as nanocarriers and have attracted lots of attention in the field of drug delivery and release because of their good biocompatibility and high-drug-loading capacity. Herein, we provide a comprehensive summary of MOF-based nanocarriers for drug delivery and release over the last five years. Meanwhile, some representative examples are highlighted in detail according to four categories, including the University of Oslo MOFs, Fe-MOFs, cyclodextrin MOFs, and other MOFs. Moreover, the opportunities and challenges of MOF-based smart delivery vehicles are discussed. We hope that this review will be helpful for researchers to understand the recent developments and challenges of MOF-based drug-delivery systems.

The Progress of Metal-Organic Framework for Boosting CO2 Conversion

With the rapid development of modern society, environmental problems, including excessive amounts of CO2 released in the atmosphere, are becoming more and more serious. It is necessary to develop new materials and technologies to reduce pollution. Among them, metal–organic frameworks (MOFs) have shown potential for application in the area of catalysis due to their ultra-high specific surface area, structural versatility, and designability as well as ease of modification and post-synthesis. Herein, we summarize recent research advances by use of MOFs for boosting CO2 conversion. Furthermore, challenges and possible research directions related to further exploration are also discussed.

Metal-Organic Frameworks and Their Composites for Environmental Applications

From the point of view of the ecological environment, contaminants such as heavy metal ions or toxic gases have caused harmful impacts on the environment and human health, and overcoming these adverse effects remains a serious and important task. Very recent, highly crystalline porous metal-organic frameworks (MOFs), with tailorable chemistry and excellent chemical stability, have shown promising properties in the field of removing various hazardous pollutants. This review concentrates on the recent progress of MOFs and MOF-based materials and their exploit in environmental applications, mainly including water treatment and gas storage and separation. Finally, challenges and trends of MOFs and MOF-based materials for future developments are discussed and explored.

Adsorption of CO2 by a novel zeolite doped amine modified ternary aerogels

Novel amine functionalized materials can capture greenhouse gas CO₂. In this study, SiO₂-Al₂O₃-ZrO₂ ternary composite aerogel was prepared by sol-gel method, supercritical drying, ultrasonic non-in-situ synthesis and other processes using aluminum chloride hexahydrate as aluminum source, ethyl orthosilicate as silicon source and tetrabbutyl zirconate as zirconium source. The composite material was used as the carrier material. By impregnation method, the modified agent bis - (3-trimethoxy-silpropyl) amine and the composite were fully mixed and modified, and the novel zeolite doped amine functionalized ternary composite aerogel was obtained by doping acidification activation zeolite. The results show that the prepared novel zeolite amine-modified ternary aerogels have rich microporous structure and ordered mesoporous structure. After loading different contents of amine-based materials (CAA-X) in the ternary aerogels, the comparison between CAAZ-X and zeolite amine-modified ternary aerogels is conducted. Zeolite doped CAAZ-30 material shows the best adsorption performance, with a maximum adsorption capacity of 5.30 mmol/g. In the presence of water vapor, CAAZ-30 material also showed the best adsorption performance, with a maximum adsorption capacity of 5.33 mmol/g. This can help us design suitable adsorbent materials for CO₂ capture in different practical applications.

Construction of a polyoxometalate-based magnetic composite MOF for the effective adsorption of cationic dyes

Adsorption and separation of dyes are extremely important as they damage the water environment and human health. ZIF-8 has the benefits of large specific surface area, explicit structure and a good confinement effect on POM, which can better facilitate the synergetic effect of POM and ZIF-8. Therefore, ZIF-8 was chosen as the support material to wrap H₃PW₁₂O₄₀. In the present work, magnetic ZIF-8@H₃PW₁₂O₄₀ composites were prepared by a facile impregnation synthesis strategy and applied to the adsorption of cationic dyes with methylene blue (MB) as a representative. Compared with the other three prepared materials, Fe₃O₄@ZIF-8@H₃PW₁₂O₄₀ exhibited the best adsorption performance. The adsorption process conformed to the pseudo-second-order model and the Langmuir model, and the adsorption reaction was spontaneous with the maximum adsorption capacity of up to 431.03 mg g^-1 within 20 min. The electrostatic attraction has been testified to be the major driving force of the adsorption process, and the material can still hold 90% of the max adsorption capacity after 5 cycles, which serve as the foundation for its further applications in the field of adsorption.

Ligand as Buffer for Improving Chemical Stability of Coordination Polymers

Chemical stability is one of the key concerns in coordination polymers (CPs). However, technologies to protect CPs against acidic or alkaline aqueous environments have yet to be implemented. Herein we demonstrate an approach for improving the pH stability by utilizing the ligand salt as buffering site to modify the unsaturated coordination sites of CPs. For the selective one-dimensional CP Eu-d-DBTA (d-H₂DBTA = d-O,O'-dibenzoyltartaric acid) with a pH stability range of 6-8, the introduction of the ligand salt Na-d-DBTA extends the pH stability interval from 3 to 11. Crystallographic structure data reveal the formation of a Eu/Na-d-DBTA dynamic structure with Na-d-DBTA buffer sites on the Eu-O cluster of the Eu-d-DBTA skeleton. Benefiting from the dynamic single-crystal-to-single-crystal transformation, the buffer sites protect the skeleton from the impact of the acidic or alkaline aqueous environment. In addition, Eu/Na-d-DBTA produces stable photoluminescence properties and selective responses toward l-tryptophan (l-Trp) and further toward l-lysine (l-Lys) over the whole buffer capacity range of 3-11. Noticeably, other Ln/Na-d-DBTA CPs and star metal-organic frameworks also exhibit pH stability improvement when the ligand-as-buffer technology is used, which is significant for developing advanced inorganic-organic hybrid materials with superior functionality.

Periodic Mesoporous Organosilica Nanoparticles for CO2 Adsorption at Standard Temperature and Pressure

(1) Background: Due to human activities, greenhouse gas (GHG) concentrations in the atmosphere are constantly rising, causing the greenhouse effect. Among GHGs, carbon dioxide (CO2) is responsible for about two-thirds of the total energy imbalance which is the origin of the increase in the Earth’s temperature. (2) Methods: In this field, we describe the development of periodic mesoporous organosilica nanoparticles (PMO NPs) used to capture and store CO2 present in the atmosphere. Several types of PMO NP (bis(triethoxysilyl)ethane (BTEE) as matrix, co-condensed with trialkoxysilylated aminopyridine (py) and trialkoxysilylated bipyridine (Etbipy and iPrbipy)) were synthesized by means of the sol-gel procedure, then characterized with different techniques (DLS, TEM, FTIR, BET). A systematic evaluation of CO2 adsorption was carried out at 298 K and 273 K, at low pressure. (3) Results: The best values of CO2 adsorption were obtained with 6% bipyridine: 1.045 mmol·g−1 at 298 K and 2.26 mmol·g−1 at 273 K. (4) Conclusions: The synthetized BTEE/aminopyridine or bipyridine PMO NPs showed significant results and could be promising for carbon capture and storage (CCS) application.

Construction and application of base-stable MOFs: a critical review

Metal-organic frameworks (MOFs) are a new class of porous crystalline materials constructed from organic ligands and metal ions/clusters. Owing to their unique advantages, they have attracted more and more attention in recent years and numerous studies have revealed their great potential in various applications. Many important applications of MOFs inevitably involve harsh alkaline operational environments. To achieve high performance and long cycling life in these applications, high stability of MOFs against bases is necessary. Therefore, the construction of base-stable MOFs has become a critical research direction in the MOF field. This review gives a historic summary of the development of base-stable MOFs in the last few years. The key factors that can determine the robustness of MOFs under basic conditions are analyzed. We also demonstrate the exciting achievements that have been made by utilizing base-stable MOFs in different applications. In the end, we discuss major challenges for the further development of base-stable MOFs. Some possible methods to address these problems are presented.

Dynamic Metal-Iodide Bonds in a Tetracoordinated Cadmium-Based Metal-Organic Framework Boosting Efficient CO2 Cycloaddition under Solvent- and Cocatalyst-Free Conditions

Due to the inherent thermodynamic stability and kinetic inertness of CO₂, heterogeneous catalytic conversion of CO₂ to cyclic carbonates often requires harsh operating conditions, high temperature and high pressure, and the addition of cocatalysts. Therefore, the development of efficient heterogeneous catalysts under cocatalyst-free and mild conditions for CO₂ conversion has always been a challenge. Herein, an infrequent tetracoordinated Cd-MOF was synthesized and used to catalyze CO₂ cycloaddition reactions efficiently without the addition of any cocatalyst, and its catalytic mechanism was systematically investigated through a series of experiments, including fluorescence analysis, X-ray photoelectron spectroscopy, microcalorimetry, and density functional theory (DFT) calculation. Cd-MOF features a 3D supermolecule structure with 1D 11.6 × 7.7 Ų channels, and the abundant Lewis acid/base and I^- sites located in the confined channel boost efficient CO₂ conversion with a maximum yield of 98.2% and a turnover number value of 1080.11 at 60 °C and 0.5 MPa, far surpassing most pristine MOF-based catalytic systems. A combined experimental and DFT calculation demonstrates that the exposed Cd(II) Lewis acid sites rapidly participate in coordination to activate the epoxides, and the resulting large steric hindrance facilitates leaving of the coordinated iodide ions in a reversibly dynamic fashion convenient for the rate-determining step ring-opening as a strong nucleophile. Such a pristine MOF catalyst with self-independent catalytic ring-opening overcomes the complicated operation limitation of the traditional cocatalyst-free MOF systems based on encapsulating/postmodifying cocatalysts, providing a whole new strategy for the development of simple, green, and efficient heterogeneous catalysts for CO₂ cycloaddition.